1. Trang chủ
  2. » Thể loại khác

TRA CUU THEP HINH CON STEEL

184 1,5K 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 184
Dung lượng 3,43 MB

Nội dung

Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình, Tra cứu thép hình,

Continental Steel Pte Ltd 100 Gul Circle Singapore 629586 Tel: +65 68620033 Fax: +65 68616448, 68625963/4006 Web: www.consteel.com.sg PRODUCTS HANDBOOK Structural Steel 2006 Edition Subsidiary Companies: Continental Hardware (M) Sdn Bhd Viewforth Trading and Engineering Pte Ltd Conblast Industries Pte Ltd Con-Struct Engineering Technology Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ CONTENT The Company Profile Services 1 Explanatory Notes General information Introduction 9 Materials - EN10025 : 2004 is the new European standard for structural steel History of the standard The new standard EN 10025 : 2004 Grade designation systems Grades, properties and nearest equivalents Manufacturing tolerances Comparison between general structural steel specifications 10 10 10 11 13 16 17 Section Properties Dimensional units Mass and force units 18 21 21 Comparison Between Hot Finished and Cold Formed Hollow Sections Introduction Specifications Manufacture of hollow sections Section properties Structural performance Compression resistance Web bearing and buckling Tension, shear and bending Summary 22 22 22 23 24 25 26 26 26 27 Fire resistance Externally protected columns Internally protected columns Cost comparisons Universal Beams and Columns General Rolling tolerances - EN 10034 : 1993 Metric sizes Imperial sizes Continental Steel Pte Ltd >>> ○ 27 27 28 28 31 31 32 34 40 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Cellular Beams Section sizes 57 57 Castellated Beams Section sizes 58 58 Structural Tees General Metric sizes Imperial sizes 63 63 64 68 Bearing Piles General Metric sizes Imperial sizes 77 77 78 80 Hot Finished Ellipcon Sections General Ellipcon sections Semi Ellipcon sections 83 83 84 85 Hot Finished Hollow Sections General Comparable specifications Product specifications Chemical composition Mechanical properties Tensile test Charpy V-notch impact test Manufacturing tolerances Other specifications 87 87 87 88 88 88 88 88 89 90 Circular sections Square sections Rectangular sections Cold Formed Hollow Sections General Comparable specifications Product specifications Chemical composition Mechanical properties Tensile test Charpy V-notch impact test Manufacturing tolerances Other specifications Continental Steel Pte Ltd 91 96 100 105 105 105 106 106 106 106 106 107 107 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ >>>> ○ Circular sections Square sections Rectangular sections Channels Rolling tolerances - EN 10279 : 2000 108 111 116 119 119 Tapered Flange Metric sizes Imperial sizes 120 120 121 Parallel Flange 124 General Introduction Material specifications Storage and handling Holing and cleating for C Purlins 125 125 125 125 126 127 Plain Channels Lipped Channels High-Tensile Galvanised C Purlins High-Tensile Galvanised Z Purlins 129 130 132 133 Rolling tolerances - EN 10056-2 : 1993 Equal Angles Unequal Angles 135 135 136 138 Flat Bars Square Bars Deformed and Round Bars 139 139 141 142 Product specifications Main specifications List of standard specifications Mild Steel Plates Chequered Plates 143 143 143 144 148 149 JIS G3452 (1988) SGP BS 1387 (1985) API 5L (1991) and ASTM A53 (1997) Chemical composition Mechanical properties Section sizes 153 153 154 156 156 156 157 Purlins Angles Bars Plates Pipes Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Steel Sheet Piles PU Steel Sheet Piles Mechanical properties Dimensions and sectional properties Interlocking options Dimensional tolerances Handling holes and double piles ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 169 169 169 169 170 170 170 KSP Steel Sheet Piles Mechanical properties Dimensions and sectional properties Interlocking options Dimensional tolerances Recommended maximum lengths for driving 171 171 171 172 172 172 KSP Straight Web Sections Mechanical properties Dimensions and sectional properties Dimensional tolerances 173 173 173 174 General Sizes 175 175 Gratings Appendix Conversion factors Continental Steel Pte Ltd 177 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ LIST OF TABLE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Note: Section tables are not numbered and put in the list, except from High-Tensile Galvanised C and Z Purlins, Mild Steel Plates, Chequered Plates, API 5L (1991) and ASTM A53 (1997) pipes, Steel Sheet Piles to EN 10248:1996 and Other Steel Sheet Piles Table - EN 10025 : part : 2004 Non-alloy structural steels 13 Table - EN 10025 : part : 2004 Normalised/normalised rolled 14 Table - EN 10025 : part : 2004 Thermo mechanically rolled 14 Table - EN 10025 : part : 2004 Structural steels with improved atmospheric 15 Table - EN 10025 : part : 2004 Flat products of high yield strength structural steels 15 Table - Comparison between general structural steel specifications 17 Table - Conditions for welding cold-deformed zones and adjacent material 25 Table - Fire resistance: Cost comparison - universal columns vs circular hollows 29 Table - Fire resistance: Cost comparison - universal columns vs rectangular hollows 29 Table 10 - Universal Beams and Columns: Standard specifications 31 Table 11 - Structural Tees: Standard specifications 63 Table 12 - Bearing Piles: Standard specifications 77 Table 13 - Hot Finished Hollow Sections: Comparable specifications 87 Table 14 - Hot Finished Hollow Sections: Mechanical properties 88 Table 15 - Hot Finished Hollow Sections: Manufacturing tolerances 89 Table 16 - Cold Formed Hollow Sections: Comparable specifications 105 Table 17 - Cold Formed Hollow Sections: Mechanical properties 106 Table 18 - Cold Formed Hollow Sections: Manufacturing tolerances 107 Table 19 - Purlins: Material specifications and tolerances 125 Table 20 - Purlins: Tolerances on length and thickness 126 Table 21 - High-Tensile Galvanised Purlins: Mechanical properties/Tolerances 126 Table 22 - High-Tensile Galvanised Purlins: Cleat holes position 128 Table 23 - High-Tensile Galvanised C-Purlins: Section sizes 132 Table 24 - High-Tensile Galvanised Z-Purlins: Section sizes 133 Table 25 - Plates: List of standards specifications 147 Table 26 - Plates: Sizes of Mild Steel Plates 149 Table 27 - Plates: Sizes of Chequered Plates 149 Table 28 - API 5L and ASTM A53 Pipes: Chemical composition Table 29 - API 5L and ASTM A53 Pipes: Mechanical properties Table 30 - PU Steel Sheet Piles: Section sizes >>> ○ 156 156 169 Table 31 - PU Steel Sheet Piles: Interlocking options Table 32 - PU Steel Sheet Piles: Dimensional tolerances Table 33 - KSP Steel Sheet Piles: Mechanical properties Table 34 - KSP Steel Sheet Piles: Section sizes and properties Table 35 - KSP Steel Sheet Piles: Interlocking options Table 36 - KSP Steel Sheet Piles: Dimensional tolerances Table 37 - KSP Straight Web Sections: Mechanical properties Table 38 - KSP Straight Web Sections: Section sizes and properties Table 39 - KSP Straight Web Sections: Interlocking strength Table 40 - KSP Straight Web Sections: Dimensional tolerances Table 41 - Gratings: Sizes 170 170 171 171 172 172 173 173 173 174 175 Continental Steel Pte Ltd LIST OF FIGURES ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Note: Drawings from section tables are not numbered and put in this list, except from High-Tensile Galvanised C and Z Purlins, Mild Steel Plates, Chequered Plates, API 5L (1991) and ASTM A53 (1997) pipes, Steel Sheet Piles to EN 10248:1996 and Other Steel Sheet Piles Figure - Effect of cold working on material properties for cold formed hollow sections 24 Figure - Comparison of corner radius of hot finished and cold formed hollow sections 24 Figure - Compression/Slenderness curves for columns 26 Figure - Universal Beams and Columns: Section shapes 31 Figure - Structural Tees: Section shapes 63 Figure - Bearing Piles: Section shape 77 Figure - Twist of square or rectangular hollow sections 90 Figure - How to measure cross-sectional dimensions of hollow sections 90 Figure - C and Z Purlins 125 Figure 10 - Holing and cleats for C purlins 127 Figure 11 - PU Steel Sheet Piles: Dimensions 169 Figure 12 - KSP Steel Sheet Piles: Dimensions 171 Figure 13 - KSP Straight Web Sections: Dimensions 173 Figure 14 - Gratings: Dimensions 175 Continental Steel Pte Ltd Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The Company ○ ○ Being one of the biggest premier steel suppliers throughout the region, Continental Steel has the ○ ○ first fully covered multi-storey warehouse that occupies a floor area of 350,000 sq ft The ware- ○ ○ ○ house has facilities that allows the following services: ○ ○ a) Rust protected storage ○ ○ ○ b) Larger stockholding capacity that can accommodate 150,000 tons of material ○ ○ c) 24 heavy-duty over-head cranes remotely controlled, some of which are magnetic ○ ○ d) Ability to service 12 container trucks at any one time ○ ○ ○ e) Advanced handling system ensures quick delivery and turn around time Conducive working environment for more productive workforce in rain or shine ○ ○ f) ○ ○ g) Ability to operate 24hr shifts to meet extra large quantity deadlines ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Continental Steel Pte Ltd is a CIDB registered supplier in the L5 category for all structural steel ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Apart from being the supplier of a comprehensive range of quality steel sections, Continental Steel aims to extend its commitment to customers by enhancing its services and adding new facilities A dedicated team is tasked to provide technical support so as to advise the proper usage of steel and assist customers in using the products to its best advantage Continental Steel Pte Ltd ○ ○ ○ SERVICES ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Technical support ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Auto Cut and Bend operations With a new team of highly qualified engineers we can advise our customers on the correct use of structural steel and provide help on the structural design • Shearing of steel plate Shearing facility that sizes steel plates up to 20mm thickness and maximum 6.1m width In current competitive business environment, efficiency and product specialization are the essence to a business survival and profitability So for building contractors and developers, material usage control and wastage management plus other fixed overhead investments like machinery and work-shop space should be kept at a minimum level To meet this demand we had invested both machinery, skill workers and other infra-structure to provide cut to size and bend to shape reinforcement bars services Thus removing building contractors and developers tons of on-site work Our company is also a HDB approved cut and bend service provider Powerful hydraulic cutters are being used to cut high tensile reinforcement bars and having capacity to cut bars up to a diameter of 40mm With auto feeding and measuring mechanism in corporate into the cutter, out-put of the cutting operation could be optimized Furthermore overhead cranes facilities provide efficiency in both moving reinforcement bars from storage bay to production area and from production area to lorry for timely delivery Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Dimensions and bend angles checks are part of the work process to ensure the end product meet customers' requirement All bending activities are either fully automatic or machines assisted Optimal layout of bending machines provides valuable space for storing finished products Furthermore it provides capacity to bend bars up to 12 meters length Thus out-sourcing cut and bend activities by contractors and developers assist them in managing their resources far more efficiently and effectively • CNC Drilling & Bandsawing Line System The steel construction industry faces many challenges in this 21st century Steel fabrication demands a fast track job, with complex detail and minimum tolerance to remain in competitive market Continental Steel provides cut to length steel material, subsequently no wastage in construction site With our automatic drilling and sawing service, we offer flexibility, productivity and reliability of steel products to meet customer's high standard requirements and tight schedule With computerized measuring system, we ensure the highest accuracy in steel cutting and drilling Whether your requirements call for complex or simple detail, large or small scale project, Continental Steel is your source for all CNC drilling and sawing requirements Continental Steel Pte Ltd PIPES Size 161 Wall thickness OD inch mm 20 508.0 Sch No (Class) 10 20(Std) 30(XS) 40 60 80 100 120 140 160 22 558.8 10 PIPES 20 30 40 164 Unit Hydrostatic test pressure weight ID Values given in (psi) 1psi = 6.895MPa t mm kg/m mm A Std Alt B Std Alt X42 X46 X52 X56 X60 X65 X70 X80 5.6 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.1 15.9 17.5 19.1 20.6 22.2 23.8 25.4 26.2 27.0 28.6 30.2 31.8 32.5 33.3 34.9 38.1 44.5 50.0 69.38 79.16 87.70 97.43 107.12 116.78 126.41 136.01 145.58 155.12 174.10 183.19 192.95 211.68 230.27 247.60 265.95 284.18 302.28 310.80 320.26 338.11 355.83 373.43 381.07 389.81 407.17 440.99 507.56 564.10 496.8 495.2 493.8 492.2 490.6 489.0 487.4 485.8 484.2 482.6 479.4 477.8 476.2 473.0 469.8 466.8 463.6 460.4 457.2 455.6 454.0 450.8 447.6 444.4 442.9 441.4 438.2 431.8 419.1 408.0 390 450 510 560 620 680 730 790 840 900 1010 1170 1120 1240 1350 1460 1580 1690 1800 1860 1910 2020 2140 2250 2310 2360 2480 2700 2800 2800 490 560 630 700 770 840 910 990 1060 1120 1260 1410 1550 1690 1830 1970 2110 2250 2390 2530 2670 2750 2750 2750 - 460 520 590 660 720 790 850 920 980 1050 1180 1250 1310 1440 1580 1710 1840 1970 2100 2170 2230 2360 2490 2620 2690 2750 2750 2800 2800 2800 570 660 740 820 900 980 1070 1150 1230 1310 1480 1640 1810 1970 2130 2300 2460 2620 2750 2750 2750 2750 2750 2750 - 830 950 1060 1180 1300 1420 1530 1660 1770 1890 2120 2360 2600 2840 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 910 1040 1160 1290 1420 1550 1680 1810 1940 2070 2330 2590 2850 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1020 1170 1320 1460 1610 1760 1900 2050 2190 2340 2630 2930 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1100 1260 1420 1570 1730 1890 2050 2210 2360 2520 2830 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1180 1350 1520 1680 1860 2030 2190 2370 2530 2700 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1280 1460 1640 1830 2010 2190 2380 2560 2740 2930 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1380 1580 1770 1970 2170 2360 2560 2760 2950 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1580 1800 2020 2250 2480 2700 2920 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 5.6 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 27.0 28.6 30.2 31.8 76.42 87.21 96.63 107.36 118.06 128.73 139.37 149.97 160.55 171.09 192.08 212.95 233.68 254.30 273.51 293.87 314.11 334.23 354.22 374.08 393.81 413.42 547.8 546.2 544.8 543.2 541.6 540.0 538.4 536.8 535.2 533.6 530.4 527.2 524.0 520.8 517.8 514.6 511.4 508.2 505.0 501.8 498.6 495.4 360 410 460 510 560 610 660 720 770 820 920 1020 1130 1230 1330 1430 1530 1640 1740 1840 1940 2050 450 510 570 640 700 770 830 900 960 1020 1150 1280 1410 1530 1660 1790 1920 2050 2170 2300 2430 2500 420 480 540 600 660 720 780 840 900 950 1070 1190 1310 1430 1550 1670 1790 1910 2030 2150 2270 2390 520 600 670 740 820 890 970 1050 1120 1190 1340 1490 1640 1790 1940 2090 2240 2390 2500 2500 2500 2500 750 860 970 1070 1180 1290 1400 1510 1610 1720 1930 2150 2360 2580 2790 3000 3000 3000 3000 3000 3000 3000 820 940 1060 1170 1290 1410 1530 1650 1770 1880 2120 2350 2590 2820 3000 3000 3000 3000 3000 3000 3000 3000 930 1060 1200 1330 1460 1600 1730 1860 2000 2130 2390 2660 2930 3000 3000 3000 3000 3000 3000 3000 3000 3000 1000 1150 1290 1430 1580 1720 1860 2010 2150 2290 2570 2860 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1080 1230 1380 1530 1690 1840 1990 2150 2300 2450 2760 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1160 1330 1490 1660 1830 1990 2160 2330 2490 2660 2990 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1250 1430 1610 1790 1970 2150 2330 2510 2690 2860 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1430 1640 1840 2040 2250 2450 2660 2870 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Continental Steel Pte Ltd PIPES inch mm Wall thickness Sch No (Class) 22 558.8 24 609.6 10 20(Std) (XS) 30 40 60 80 100 120 140 160 26 660.0 10 (Std) 20(XS) Unit weight ID Hydrostatic test pressure Values given in (psi) 1psi = 6.895MPa t mm kg/m mm A Std Alt B Std Alt X42 X46 X52 X56 X60 X65 X70 X80 33.3 34.9 36.5 38.1 431.69 451.06 470.30 489.41 492.4 489.2 486.0 482.8 2150 2250 2350 2450 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 24.6 25.4 27.0 28.6 30.2 31.0 31.8 33.3 34.9 36.5 38.1 38.9 39.7 46.0 52.4 59.5 95.26 105.56 117.30 129.00 140.68 152.32 163.93 175.51 187.06 210.07 232.94 255.69 278.32 299.41 321.79 344.05 355.41 366.17 388.17 410.05 431.80 441.31 453.42 473.57 494.95 516.20 537.33 546.68 558.32 638.93 718.88 806.75 597.2 595.8 594.2 592.6 591.0 589.4 587.8 586.2 584.6 581.4 578.2 575.0 571.8 568.8 565.6 562.4 560.4 559.2 556.0 552.8 549.6 547.7 546.4 543.4 540.2 537.0 533.8 531.8 530.6 517.6 504.9 490.5 380 420 470 520 560 610 660 700 750 840 940 1030 1120 1220 1310 1410 1450 1500 1590 1690 1780 1830 1880 1970 2060 2160 2250 2300 2300 2720 2800 2800 470 530 580 640 700 760 820 880 940 1050 1170 1290 1410 1520 1640 1760 1880 1990 2110 2230 2300 2300 2300 2300 2300 2300 - 440 490 550 600 660 710 770 820 880 980 1090 1200 1310 1420 1530 1640 1700 1750 1860 1970 2080 2130 2190 2300 2300 2300 2300 2680 2300 2800 2800 2800 550 610 680 750 820 890 960 1030 1090 1230 1370 1500 1640 1780 1910 2050 2190 2300 2300 2300 2300 2300 2300 2300 2300 2300 - 790 890 980 1080 1180 1280 1380 1480 1580 1770 1970 2170 2360 2560 2760 2950 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 860 970 1080 1190 1290 1400 1510 1620 1730 1940 2160 2370 2590 2800 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 980 1100 1220 1340 1460 1580 1710 1830 1950 2190 2440 2680 2930 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1050 1180 1310 1440 1580 1710 1840 1970 2100 2360 2630 2890 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1130 1260 1400 1550 1690 1830 1970 2110 2250 2530 2810 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1220 1370 1520 1680 1830 1980 2140 2290 2440 2740 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1310 1480 1640 1810 1970 2130 2300 2460 2630 2950 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 1500 1690 1870 2060 2250 2440 2630 2810 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 - 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 103.15 114.31 127.04 139.73 152.39 165.02 177.62 190.19 202.72 227.70 252.55 277.27 301.87 324.81 349.16 373.39 397.49 647.2 645.8 644.2 642.6 641.0 639.4 637.8 636.2 634.6 631.4 628.2 625.0 621.8 618.8 615.6 612.4 609.2 350 390 430 480 520 560 610 650 690 780 870 950 1040 1120 1210 1300 1380 430 490 540 600 650 700 760 810 870 970 1080 1190 1300 1410 1510 1620 1730 400 450 500 560 610 660 710 760 810 910 1010 1110 1210 1310 1410 1520 1620 500 570 630 690 760 820 880 950 1010 1130 1260 1390 1510 1640 1770 1890 2000 730 820 910 1000 1090 1180 1270 1360 1450 1630 1820 2000 2180 2360 2540 2730 2910 800 890 990 1100 1190 1290 1390 1490 1590 1790 1990 2190 2390 2590 2790 2990 3000 900 1010 1120 1240 1350 1460 1580 1690 1800 2020 2250 2480 2700 2920 3000 3000 3000 970 1090 1210 1330 1450 1570 1700 1820 1940 2180 2420 2670 2910 3000 3000 3000 3000 1040 1170 1300 1430 1560 1690 1820 1950 2080 2330 2600 2860 3000 3000 3000 3000 3000 1130 1260 1400 1550 1690 1830 1970 2110 2250 2530 2810 3000 3000 3000 3000 3000 3000 1210 1360 1510 1670 1820 1970 2120 2270 2420 2720 3000 3000 3000 3000 3000 3000 3000 1380 1560 1730 1910 2080 2250 2430 2600 2770 3000 3000 3000 3000 3000 3000 3000 3000 Continental Steel Pte Ltd PIPES Size OD 162 165 PIPES Size 163 Wall thickness OD inch mm Sch No (Class) 28 711.0 10 20 30 30 762.0 10 20 30 PIPES 32 813.0 10 20 30 40 166 Unit Hydrostatic test pressure weight ID Values given in (psi) 1psi = 6.895MPa t mm kg/m mm A Std Alt B Std Alt X42 X46 X52 X56 X60 X65 X70 X80 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 111.20 123.24 136.97 150.67 164.34 177.98 191.58 205.15 218.69 245.68 272.54 299.28 325.89 350.72 377.08 403.32 429.44 698.2 696.8 695.2 693.6 692.0 690.4 688.8 687.2 685.6 682.4 679.2 676.0 672.8 669.8 666.6 663.4 660.2 320 360 400 440 480 520 560 600 640 720 800 880 960 1040 1120 1210 1290 400 450 500 550 600 650 700 750 800 900 1000 1110 1210 1300 1410 1510 1610 370 420 470 520 560 610 660 700 750 840 940 1030 1120 1220 1310 1410 1500 470 530 580 650 700 760 820 880 940 1050 1170 1290 1410 1520 1640 1760 1880 680 760 840 930 1010 1100 1180 1270 1350 1520 1690 1860 2020 2190 2360 2530 2700 740 830 920 1020 1110 1200 1300 1390 1480 1660 1850 2030 2220 2400 2590 2770 2960 840 940 1040 1150 1250 1360 1460 1570 1670 1880 2090 2300 2510 2710 2920 3000 3000 900 1010 1120 1240 1350 1460 1580 1690 1800 2020 2250 2480 2700 2920 3000 3000 3000 960 1080 1200 1330 1450 1570 1690 1810 1930 2170 2410 2650 2890 3000 3000 3000 3000 1040 1170 1300 1440 1570 1700 1830 1960 2090 2350 2610 2870 3000 3000 3000 3000 3000 1130 1260 1400 1550 1690 1830 1970 2110 2250 2530 2810 3000 3000 3000 3000 3000 3000 1290 1450 1600 1770 1930 2090 2250 2410 2570 2890 3000 3000 3000 3000 3000 3000 3000 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 27.0 28.6 30.2 119.25 132.17 146.91 161.61 176.29 190.93 205.54 220.12 234.67 263.67 292.54 321.29 349.91 376.63 405.00 433.26 461.38 489.38 517.25 544.99 749.2 747.8 746.2 744.6 743.0 741.4 739.8 738.2 736.6 733.4 730.2 727.0 723.8 720.8 717.6 714.4 711.2 708.0 704.8 701.6 300 340 370 410 450 490 530 560 600 670 750 830 900 970 1050 1130 1200 1270 1350 1430 370 420 470 520 560 610 660 700 750 840 940 1030 1120 1220 1310 1410 1500 1590 1690 1780 350 390 440 480 520 590 610 660 700 790 880 960 1050 1140 1220 1310 1400 1490 1580 1660 440 490 550 600 660 710 770 820 880 980 1090 1200 1310 1420 1530 1640 1750 1860 1970 2080 630 710 790 870 940 1020 1100 1180 1260 1420 1580 1730 1890 2050 2200 2360 2520 2680 2840 2990 690 780 860 950 1040 1120 1210 1290 1380 1550 1720 1900 2070 2240 2420 2590 2760 2930 3000 3000 780 880 970 1070 1170 1270 1370 1460 1560 1750 1950 2150 2340 2530 2730 2930 3000 3000 3000 3000 840 940 1050 1160 1260 1360 1470 1580 1680 1890 2100 2310 2520 2730 2940 3000 3000 3000 3000 3000 900 1010 1120 1240 1350 1460 1580 1690 1800 2020 2250 2480 2700 2920 3000 3000 3000 3000 3000 3000 980 1100 1220 1340 1460 1580 1710 1830 1950 2190 2440 2680 2920 3000 3000 3000 3000 3000 3000 3000 1050 1180 1310 1440 1580 1710 1840 1970 2100 2360 2630 2890 3000 3000 3000 3000 3000 3000 3000 3000 1210 1360 1510 1660 1810 1960 2110 2260 2410 2700 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 127.30 141.10 156.84 172.56 188.24 203.88 219.50 235.09 250.64 281.65 312.54 343.30 373.93 402.54 432.93 463.19 800.2 798.8 797.2 795.6 794.0 792.4 790.8 789.2 787.6 784.4 781.2 778.0 774.8 771.8 768.6 765.4 280 320 350 390 420 460 490 530 560 630 700 770 840 910 980 1060 350 400 440 480 530 570 620 660 700 790 880 970 1050 1140 1230 1320 330 370 410 450 490 530 570 620 660 740 820 900 980 1070 1150 1230 410 460 510 560 620 670 720 770 820 920 1030 1130 1230 1330 1440 1540 590 660 740 810 890 960 1030 1110 1180 1330 1480 1630 1770 1920 2070 2220 650 730 810 890 970 1050 1130 1210 1290 1450 1620 1780 1940 2100 2260 2430 730 820 910 1010 1100 1190 1280 1370 1460 1640 1830 2010 2190 2380 2560 2740 790 890 980 1080 1180 1280 1380 1480 1580 1770 1970 2170 2360 2560 2760 2950 840 950 1050 1160 1270 1370 1480 1580 1690 1900 2110 2320 2530 2740 2950 3000 910 1030 1140 1260 1370 1480 1600 1710 1830 2050 2290 2520 2740 2970 3000 3000 980 1110 1230 1350 1480 1600 1720 1850 1970 2210 2460 2710 2950 3000 3000 3000 1130 1270 1410 1550 1690 1830 1970 2110 2250 2520 2800 3000 3000 3000 3000 3000 Continental Steel Pte Ltd PIPES Wall thickness OD inch mm Sch No (Class) 32 813.0 34 864.0 10 30 40 36 914.0 10 20 30 40 Unit Hydrostatic test pressure weight ID Values given in (psi) 1psi = 6.895MPa t mm kg/m mm A Std Alt B Std Alt X42 X46 X52 X56 X60 X65 X70 X80 25.4 27.0 28.6 30.2 31.8 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 27.0 28.6 30.2 31.8 6.4 7.1 7.9 8.7 9.5 10.3 11.1 11.9 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4 27.0 28.6 30.2 31.8 493.32 523.33 553.22 582.98 612.61 135.35 150.03 166.78 183.50 200.18 216.84 233.46 250.05 266.61 299.64 332.53 365.31 397.95 428.44 460.85 493.12 525.27 557.29 589.19 620.96 652.60 143.24 158.79 176.52 194.22 211.90 229.54 247.15 264.72 282.27 317.27 352.14 386.88 421.50 453.84 488.22 522.47 556.59 590.58 624.45 658.19 691.81 762.2 759.0 755.8 752.6 749.4 851.2 849.8 848.2 846.6 845.0 843.4 841.8 840.2 838.6 835.4 832.2 829.0 825.8 822.8 819.6 816.4 813.2 810.0 806.8 803.6 800.4 901.2 899.8 898.2 896.6 895.0 893.4 891.8 890.2 888.6 885.4 882.2 879.0 875.8 872.8 869.6 866.4 863.2 860.0 856.8 853.6 850.4 1120 1190 1270 1340 1410 260 300 330 360 400 430 460 500 530 600 660 730 790 860 930 990 1060 1120 1190 1260 1320 250 280 310 340 380 410 440 470 500 560 620 690 750 810 880 940 1000 1060 1130 1190 1250 1410 1490 1580 1670 1760 330 370 410 460 500 540 580 620 660 740 830 910 990 1070 1160 1240 1320 1410 1490 1570 1650 310 350 390 430 470 510 550 590 620 700 780 860 940 1020 1090 1170 1250 1330 1410 1480 1560 1310 1390 1480 1560 1640 310 350 390 420 460 500 540 580 620 690 770 850 930 1000 1080 1160 1240 1310 1390 1470 1540 290 330 360 400 440 470 510 550 580 660 730 800 880 950 1020 1090 1170 1240 1310 1390 1460 1640 1740 1850 1950 2050 390 430 480 530 580 630 680 720 770 870 970 1060 1160 1250 1350 1450 1540 1640 1740 1830 1930 360 410 450 500 550 590 640 680 730 820 910 1000 1090 1180 1280 1370 1460 1550 1640 1730 1820 2360 2510 2660 2810 2950 560 620 690 760 830 900 970 1040 1110 1250 1390 1530 1670 1810 1950 2090 2220 2360 2500 2640 2780 520 590 660 720 790 850 920 980 1050 1180 1310 1440 1580 1710 1840 1970 2100 2230 2360 2490 2630 2590 2750 2910 3000 3000 610 680 760 840 910 990 1070 1140 1220 1370 1520 1680 1830 1980 2130 2280 2440 2590 2740 2890 3000 580 650 720 790 860 930 1010 1080 1150 1290 1440 1580 1720 1870 2010 2160 2300 2440 2590 2730 2870 2920 3000 3000 3000 3000 690 770 860 950 1030 1120 1210 1290 1380 1550 1720 1890 2060 2240 2410 2580 2750 2920 3000 3000 3000 650 730 810 890 980 1060 1140 1220 1300 1460 1620 1790 1950 2110 2280 2440 2600 2760 2930 3000 3000 3000 3000 3000 3000 3000 740 830 920 1020 1110 1200 1300 1390 1480 1670 1850 2040 2220 2410 2590 2780 2960 3000 3000 3000 3000 700 790 870 960 1050 1140 1230 1310 1400 1570 1750 1930 2100 2270 2450 2630 2800 2970 3000 3000 3000 3000 3000 3000 3000 3000 790 890 990 1090 1190 1290 1390 1490 1590 1790 1990 2190 2380 2580 2780 2980 3000 3000 3000 3000 3000 750 840 940 1030 1120 1220 1310 1410 1500 1690 1880 2060 2250 2440 2620 2810 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 860 970 1070 1180 1290 1400 1510 1610 1720 1930 2150 2370 2580 2790 3000 3000 3000 3000 3000 3000 3000 810 910 1010 1120 1220 1320 1420 1520 1620 1820 2030 2240 2440 2640 2840 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 930 1040 1160 1270 1390 1500 1620 1740 1850 2080 2320 2550 2780 3000 3000 3000 3000 3000 3000 3000 3000 880 980 1090 1200 1310 1420 1530 1640 1750 1970 2190 2410 2630 2840 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1060 1190 1330 1460 1590 1720 1860 1990 2130 2380 2650 2910 3000 3000 3000 3000 3000 3000 3000 3000 3000 1000 1120 1250 1380 1500 1620 1750 1880 2000 2250 2500 2750 3000 3000 3000 3000 3000 3000 3000 3000 3000 Continental Steel Pte Ltd PIPES Size 164 167 PIPES 168 Continental Steel Pte Ltd STEEL SHEET PILES 167 Steel Sheet Piles PU Steel Sheet Piles Mechanical properties PU steel sheet piles can be supplied in grades up to yield strength of 430 N/mm2 Dimensions and sectional properties The PU steel sheet piles are available in the following sizes: d t y’ y’ Cy’ 2xh y y" y y" Cy” f 2xb Figure 11 – PU Steel Sheet Piles: Dimensions PU per pile pan of pan web Cy’ Cy” per pile per pile per pile per pile mm mm mm mm mm Mm kg/m 113 600 330 7.5 6.4 68.9 23.0 45.3 75.0 54.5 69.5 91.0 65.9 110 140 600 317 8.0 8.0 81.5 27.2 180 600 257 9.8 9.0 100.4 33.5 190 600 303 12.0 9.0 115.8 38.6 200 600 365 12.4 9.7 125.3 41.8 per m wall PU 25 per pile 226 600 339 14.2 10.0 142.1 47.4 per m wall PU 32 per pile per m wall Zy mm per m wall PU 20 gyration A f per m wall PU 16 Radius of Modulus b per m wall PU 12 Moment Of Inertia area h per m wall PU Mass Section Section per m 226 600 341 19.5 11.0 148.6 49.5 cm Iy Iz r cm cm cm cm 57.7 146 1,290 23,900 4.73 96.0 600 6,720 - 8.36 232 2,360 30,062 5.82 116.0 830 11,610 - 10.02 84.0 366 4,450 34,937 7.28 140.0 1,200 21,550 - 12.41 74.7 95.2 405 5,560 38,037 7.64 124 159.0 1600 30,520 - 13.87 84.7 107.9 480 7,080 46,021 8.1 141 180.0 2000 39,970 - 14.92 94.1 119.9 588 9,670 49,089 8.98 157 200.0 2,500 56,500 - 16.81 114.6 146.0 645 11,100 55,134 8.72 191 243.0 3,200 72,260 - 17.23 STEEL SHEET PILES Flat of Thickness Section Table 30 – PU Steel Sheet Piles: Section sizes The PU sheet piles can be delivered in material according to British BS-standards, American ASTM-standards, Euronorms, and Japanese JIS-standards Continental Steel Pte Ltd 169 168 STEEL SHEET PILES Interlocking options Section PU PU PU 12 PU 16 PU 20 PU 25 PU 32 PU PU               PU 12 PU 16 PU 20                       Interlocking possible PU 25 PU 32                On request (require in advance indicating length of piles) Table 31 – PU Steel Sheet Piles: Interlocking options Dimensional tolerances Width Thickness of Pan single pile interlocked e8mm 8[...]... uniform control, Continental can achieve the optimum production environment In concert with our Quality Assurance program and continuous inspection control, we are in the edge in providing best flexibility, productivity and reliability of steel saw and drill service We welcome the challenge to become your supplier of high quality ready-to-use steel products to be delivered on time Continental Steel Pte... 1993 • Part 5 - Technical delivery conditions for structural steels with improved atmospheric corrosion resistance - also known as weathering steels Supersedes EN 10155 : 1993 • Part 6 - Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition Supersedes EN 10137 : parts 1 & 2 : 1996 10 Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○... these may also be used for cold formed sections (extract from New Steel Construction, August/September 1998) Tension, shear and bending Cold formed members in tension, shear, bending and lateral torsional buckling may be treated in the same way as hot finished hollow sections (extract from New Steel Construction, August/September 1998) 26 Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○... for the special requirements of steel construction and steel suppliers and combine solid machine construction with high performance elements The large cutting range, even for acutely angled mitresquares on both sides, combined with compact construction, particularly distinguish this Bandsaw - Short setup times due to NC-controlled mitre angle setting and automatic cycle control (clamping - sawing- releasing)... technical delivery conditions • Part 2 - Technical delivery conditions for non-alloy structural steels Supersedes EN 10025 : 1993 • Part 3 - Technical delivery conditions for normalised / normalised rolled weldable fine grain structural steels Supersedes EN 10113 : parts 1 & 2 : 1993 • Part 4 - Technical delivery conditions for thermo mechanically rolled weldable fine grain structural steels Supersedes... Iy  = 1 Ix Iy = is the second moment of area about the major axis = is the second moment of area about the minor axis A = is the cross-sectional area h = is the distance between the shear centres of flanges (for T sections, h is the distance between shear centre of the flange and the toe of the web) = is the warping constant = is the torsion constant H J Ix Continental Steel Pte Ltd 19 Explanatory... delivery staff and efficient transportation services, just in time requirements can be achieved There are 24 heavy-duty over-head cranes remotely controlled, some of which are magnetic with up to 12 tons loading capacity A mobile crane with maximum 30 tons lifting capacity is also available to ensure unloading at any construction site As one of the leading steel suppliers, Continental Steel has set up an industrial... screw drive and servo motors 4 ○ Continental Steel Pte Ltd 1 2 10 - 40 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Features of the KBS Bandsaw: Future expansion of new drilling technology will satisfy steel industry with advanced bolt connection for structural steel work industry A new Thermal... Continental Steel has set up an industrial standard in the region The company also has the capability of providing steels to the exact specified requirements for different needs Continental Steel Pte Ltd 7 ○ 8 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Continental Steel Pte Ltd ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Explanatory Notes ○ ○ ○ ○ ○ ○ ○ ○ ○... users of steel Symbols used in EN 10025 : part 2 : 2004 Non-alloy structural steels S Structural steel E Engineering steel 235 Minimum yield strength (Reh) in MPa @ 16mm .JR Longitudinal Charpy V-notch impacts 27 J @ +20°C .J0 Longitudinal Charpy V-notch impacts 27 J @ 0°C .J2 Longitudinal Charpy V-notch impacts 27 J @ -20°C .K2 Longitudinal Charpy V-notch impacts 40 J @ -20°C .+AR Supply condition

Ngày đăng: 16/08/2016, 15:56

TỪ KHÓA LIÊN QUAN

w