LS VINA Cable www.lsvinacable.com.vn LOW & MEDIUM VOLTAGE POWER CABLE Cáp điện trung hạ INTRODUCTION Established on january, 25th 1996, LS-VINA Cable ( formerly LG-VINA Cable) is a Joint Stock with LS Cable Ltd of Korea Our bare condutors, OPGW, low voltage, medium voltage, high voltage cables up to 230kV are designed and made to meet standards as IEC, TCVN and international standards ( ICEA, AEIC, BS, AS, JIS…) In LS-VINA Cable, we apply Quanlity management system ISO 9001-2000 and many national and international quanlity awards have been granted to the company and our products GIỚI THIỆU LS-VINA Cable (tên cũ LS- VINA Cable) thành lập ngày 25/01/1996 Công Ty Cổ phần, bên LS Cable Ltd., nhãn hiệu tiếng Hàn Quốc Sản phẩm LS-VINA Cable bao gồm loại dây dẫn trần, cáp quang OPGW, cáp điện hạ thế, trung cao với điện áp đến 230kV sản xuất đáp ứng tiêu chuẩn IEC, TCVN tiêu chuẩn quốc tế khác ( ICEA, AEIC, BS, AS, JIS…) Công ty áp dụng hệ thống quản lý chất lượng ISO 9001-2000 giành nhiều giải thưởng chất lượng quốc gia quốc tế CONTENTS nội dung 0.6/1(1.2)kV single and multi-core XLPE cables Cáp bọc XLPE hạ lõi nhiều lõi 0.6/1(1,2)kV 0.6/1(1.2)kV multi-core XLPE cables Cáp bọc XLPE hạ nhiều lõi 0.6/1(1,2)kV 3.6/6(7.2)kV XLPE insulated single and three-core cables 12 Cáp bọc XLPE ba lõi 3,6/6(7.2)kV 6/10(12)kV XLPE insulated single and three-core cables 14 Cáp bọc XLPE ba lõi 6/10(12)kV XLPE 12/20(24)kV XLPE insulated single and three-core cables 16 Cáp bọc XLPE ba lõi 12/20(24)kV XLPE 18/30(36)kV XLPE insulated single and three-core cables 18 Cáp bọc XLPE ba lõi 18/30(36)kV XLPE 20/35(40.5)kV XLPE insulated single and three-core cables 20 Cáp bọc XLPE ba lõi 20/35(40.5)kV XLPE XLPE insulated aerial bundled medium voltage cables 22 Cáp trung vặn xoắn không xọc XLPE MV and LV insulated conductors 23 Dây bọc MV LV PVC control cables and sreened control cables ( CVV, CVV-S) 24 Cáp điều khiển cáp điều khiển có chắn (cvv, cvv-s) 0.6/1(1.2)kV aerial bundled Cables 26 Cáp vặn xoắn 0.6/1(1.2)kV 0.6/1(1.2)kV two-core Muyler cables 28 Cáp muyler lõi 0.6/1(1.2)kV Current rating 29 Dòng định mức Cable handling and insallation 36 Lắp đặt nâng hạ cáp TYPE DESIGNATION The code designation for LS-VINA Cable consist of the initial letter “C”, to which the following letters indicating individual important companent parts are added, stating from the insulation C : Cross-linked polyethylene insulation (XLPE) WS: : Consentric copper wire screen V: : PVC inner covering, separation sheath or outer sheath AWA: : Alunimum Wire Armor(Single Core) WA : Galvanized Steel Wire Armor TA : Double Steel Tape Armor ATA : Double Aluminum tape Armor (Single core) Note: The letter for Copper conductor is blank and Aluminum conductor is “AL-“ Examples of cables: * 1x95SQ 6/10kV CWSV Sing core cable with Cu conductor, XLPE insulation, Copper wire sreen, PVC outer sheath * 3x95SQ 6/10kV CVWAV Three core cable with Cu conductor, XLPE insulation, Copper wire sreen, PVC separation sheath, Galvanized steel wire armor and PVC sheath * 3x95SQ 6/10kV CVTAV Three core cable with Cu conductor, XLPE insulation, Copper wire sreen, PVC separation sheath, Double steel tape armor and PVC sheath * 3x95SQ 6/10kV AL-CVTAV Three core cable with Al conductor, XLPE insulation, Copper tape sreen, PVC separation sheath, Double steel wire armor and PVC sheath MÃ THIẾT KẾ Mã hiệu thiết kế cho LS-VINA Cable gồm chữ mà theo nhận biết lớp cấu trúc cáp, bắt đầu chữ “C” C : Cách điện XLPE WS : sợi đồng chắn V : Lớp bọc trong, bọc phân cách lớp vỏ PVC AWA : Giáp sợi nhôm (Cáp đơn) TA : Giáp băng thép ATA : Giáp băng nhôm(Cáp đơn) Lưu ý: cáp lõi đơn ký hiệu “AL –” ký hiệu cho lõi đồng, Ví dụ cho cáp: * 1x95SQ 6/10kV CWSV Cáp đơn pha lõi đồng, cách điện XLEP, sợi đồng chắn, vỏ bọc PVC * 3x95SQ 6/10kV CVWAV Cáp pha lõi đồng, cách điện XLPE, băng đồng chắn, bọc phân cách PVC, giáp sợi thép mạ kẽm, vỏ bọc PVC * 3x95SQ 6/10kV CVTAV Cáp pha lõi đồng, cách điện XLEP, băng đồng chắn, bọc phân cách PVC, giáp băng thép, vỏ bọc PVC * 3x95SQ 6/10kV AL-CVTAV Cáp pha lõi nhôm, cách điện XLEP, băng đồng chắn, bọc phân cách PVC, giáp băng thép vỏ bọc PVC 0.6/1(1.2)kV Core XLPE Cable Cáp lõi bọc XLPE 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness of Insulation (nom.) Thickness of Extruded Inner Tiết điện Đường kính lõi mm2 mm Chiều dày cách điện 1.5 1.56 0.7 1.0 2.5 2.01 0.7 2.55 0.7 3.12 10 16 Diameter/ Thickness of Amor (nom.) Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Aluminum conductor Lõi đồng * ** * ** *** UnAr * ** AWA DATA AWA DATA AWA DATA 0.9 1.4 1.8 11 50 1.0 0.9 1.4 1.8 11 1.0 0.9 1.4 1.8 12 0.7 1.0 0.9 1.4 1.8 4.05 4.7 0.7 0.7 1.0 1.0 1.0 0.9 0.9 0.5 1.4 1.4 1.8 1.8 25 5.9 0.9 1.0 1.0 0.9 0.5 1.4 35 6.9 0.9 1.0 1.0 0.9 0.5 50 8.0 1.0 1.0 1.0 0.9 70 95 9.8 11.4 1.1 1.1 1.0 1.0 1.0 1.0 120 12.8 1.2 1.0 150 14.2 1.4 1.0 185 15.8 1.6 240 300 18.1 20.4 400 500 mm mm mm *** UnAr mm * AWA ** DATA *** UnAr mm Lõi nhôm * ** AWA DATA *** UnAr Kg/km * ** AWA DATA *** UnAr Kg/km * ** AWA DATA m 160 500 500 65 170 500 500 80 190 500 500 12 110 240 500 500 1.8 10 13 14 14 150 210 280 340 320 120 250 220 500 500 500 500 500 1.8 1.8 11 16 16 310 470 440 160 310 280 500 500 500 1.4 1.8 1.8 12 17 17 410 580 540 200 360 330 500 500 500 0.5 1.4 1.8 1.8 14 18 18 540 720 680 250 430 390 500 500 500 0.9 0.9 0.5 0.5 1.4 1.5 1.8 1.8 1.8 1.8 16 18 20 22 20 22 750 1,010 960 1,230 910 1,180 330 430 530 640 490 590 500 500 500 500 500 500 1.0 1.6 0.5 1.5 1.8 1.8 19 25 23 1,270 1,610 1,450 520 860 700 500 500 500 1.0 1.6 0.5 1.6 1.8 1.8 21 27 25 1,560 1,920 1,750 640 1,000 820 500 500 500 1.0 1.0 1.6 0.5 1.6 18 1.8 23 29 27 1,940 2,330 2,140 780 1,170 980 500 500 500 1.7 1.8 1.0 1.0 1.0 1.0 1.6 1.6 0.5 0.5 1.7 1.8 1.9 2.0 1.8 1.9 26 29 32 34 30 33 2,540 3,160 2,980 2,750 3,630 3,390 1,000 1,440 1,230 1,700 1,210 1,450 500 500 500 500 500 500 23.2 2.0 1.2 1.2 2.0 0.5 1.9 2.1 2.0 32 39 36 4,010 4,670 4,290 1,550 2,200 1,820 500 500 500 26.3 2.2 1.2 1.2 2.0 0.5 2.0 2.2 2.2 36 43 42 5,110 5,840 5,630 1,950 2,670 2,460 500 500 500 630 30.2 2.4 1.4 2.5 2.2 2.5 42 49 6,680 7,630 2,580 3,570 500 500 800 34.0 2.6 1.4 2.5 2.3 2.7 46 54 8,450 9,240 3,200 4,320 500 500 1,000 38.7 2.8 1.4 2.5 2.4 2.8 51 59 10,530 11,567 3,940 5,070 250 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *AWA: Aluminum Wire Armoured/ **DATA: Double Al Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Core XLPE Cable Cáp lõi bọc XLPE 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Approx Thickness Thickness of Diameter/ Thickness of PVC Approx Approx Weight of cable- khối lượng cáp gần Nomial Cross- Outside of Extruded Thickness of Outer Sheath Overall Diameter Drum Length sectional Diameter Insulation Inner Amor (nom.) (nom.) Area of Copper conductor (nom.) Aluminum conductor Condutor Lõi đồng Tiết diện Đường Chiều * GSWA ** * DSTA GSWA ** *** DSTA UnAr * GSWA ** *** DSTA UnAr * GSWA ** *** DSTA UnAr * GSWA Lõi nhôm ** *** DSTA UnAr * GSWA ** *** DSTA UnAr GSWA * ** DSTA kính lõi dày Mm2 mm 1.5 1.56 1.0 1.0 0.9 0.2 1.8 1.8 1.8 11 15 14 130 360 230 500 500 2.5 2.01 mm cách 0.7 điện 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 12 15 15 170 430 320 500 500 2.55 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 13 16 16 210 500 380 500 500 3.12 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 14 17 17 280 570 440 500 500 10 16 4.05 4.7 0.7 0.7 1.0 1.0 1.0 1.0 0.9 0.9 0.2 0.2 1.8 1.8 1.8 1.8 1.8 1.8 16 17 20 21 19 21 370 500 710 850 500 630 300 650 430 500 500 500 500 500 25 5.9 0.9 1.0 1.0 1.6 0.2 1.8 1.8 1.8 21 26 24 730 1,460 670 420 310 670 500 500 500 35 6.9 0.9 1.0 1.0 1.6 0.2 1.8 1.8 1.8 23 28 26 960 1,750 1,220 530 360 790 500 500 500 50 8.0 1.0 1.0 1.0 1.6 0.2 1.8 1.9 1.8 26 31 29 1,250 2,130 1,540 660 1,530 950 500 500 500 70 95 9.8 11.4 1.1 1.1 1.0 1.2 1.0 1.2 1.6 2.0 0.2 0.2 1.9 2.0 2.0 2.2 2.0 2.1 29 33 35 40 33 37 1,730 2,330 2,760 2,080 3,330 2,730 870 1,140 1,910 2,580 1,220 1,540 500 500 500 500 500 500 120 12.8 1.2 1.2 1.2 2.0 0.5 2.1 2.3 2.3 37 43 43 2,920 4,530 3,870 1,400 3,010 2,350 500 500 500 150 14.2 1.4 1.2 1.2 2.5 0.5 2.3 2.5 2.4 41 47 47 3,580 5,350 4,620 1,740 3,520 2,750 500 500 500 185 15.8 1.6 1.4 1.4 2.5 0.5 2.4 2.6 2.5 45 53 42 4,450 6,940 5,640 2,110 4,600 3,300 500 500 500 240 300 18.1 20.4 1.7 1.8 1.4 1.6 1.4 1.6 2.5 2.5 0.5 0.5 2.6 2.8 2.8 3.0 2.7 2.9 51 57 59 65 58 63 5,850 8,640 7,150 7,270 10,440 8,730 2,740 5,530 3,360 6,530 4,040 4,830 500 500 500 250 500 500 400 23.2 2.0 1.6 1.6 2.5 0.5 3.0 3.2 3.2 63 71 70 9,170 12,670 10,820 4,180 7,760 5,840 500 250 250 mm mm mm mm Kg/km Kg/km m 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *GSWA: Galvanized Steel Wire Armoured/ **DSTA: Double Steel Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Cores XLPE Cable Cáp lõi bọc XLPE 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness Tiết diện Đường kính lõi Mm2 mm 1.5 1.56 Chiều dày cách mm điện 0.7 2.5 2.01 2.55 of Insulation (nom.) Thickness of Extruded Inner Diameter/ Thickness of Amor (nom.) Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Aluminum conductor Lõi đồng * GSWA ** DSTA mm * ** GSWA DSTA *** UnAr mm * GSWA ** DSTA *** UnAr mm * GSWA ** DSTA *** UnAr mm * GSWA Lõi nhôm ** DSTA *** UnAr Kg/km * GSWA ** DSTA *** UnAr GSWA Kg/km * ** DSTA m 1.0 1.0 0.9 0.2 1.8 1.8 1.8 12 15 15 160 390 230 500 500 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 13 16 16 200 470 320 500 500 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 14 17 17 260 560 380 500 500 3.12 0.7 1.0 1.0 0.9 0.2 1.8 1.8 1.8 15 18 18 330 660 440 500 500 10 16 4.05 4.7 0.7 0.7 1.0 1.0 1.0 1.0 0.9 0.9 0.2 0.2 1.8 1.8 1.8 1.8 1.8 1.8 17 18 20 22 20 22 480 660 830 1,040 500 880 360 740 580 500 500 500 500 500 25 5.9 0.9 1.0 1.0 1.6 0.2 1.8 1.8 1.8 22 27 25 990 1,740 1,240 520 1,270 780 500 500 500 35 6.9 0.9 1.0 1.0 1.6 0.2 1.8 1.8 1.8 24 30 28 1,350 2,220 1,660 620 1,500 930 500 500 500 50 8.0 1.0 1.0 1.0 1.6 0.2 1.8 1.8 1.8 27 32 31 1,710 2,660 2,020 820 1,770 1,130 500 500 500 70 95 9.8 11.4 1.1 1.1 1.0 1.2 1.0 1.2 2.0 2.0 0.2 0.5 1.9 2.0 2.0 2.2 2.0 2.1 32 36 37 42 35 41 2,400 3,220 3,750 2,770 4,800 4,140 1,120 2,470 1,140 3,010 1,480 2,350 500 500 500 500 500 500 120 12.8 1.2 1.2 1.2 2.0 0.5 2.1 2.3 2.3 39 46 45 4,060 5,790 5,100 1,780 3,520 2,820 500 500 500 150 14.2 1.4 1.2 1.2 2.5 0.5 2.3 2.5 2.4 44 52 50 5,020 7,420 6,170 2,200 4,610 3,750 500 500 500 185 15.8 1.6 1.4 1.4 2.5 0.5 2.4 2.6 2.5 49 56 55 6,230 8,920 7,500 2,720 5,400 3,980 500 500 500 240 300 18.1 20.4 1.7 1.8 1.4 1.6 1.4 1.6 2.5 2.5 0.5 0.5 2.6 2.8 2.8 3.0 2.7 2.9 55 61 63 69 61 67 8,200 11,180 9,590 10,200 13,540 11,780 3,540 6,520 4,340 7,680 4,930 5,920 500 250 250 250 250 250 400 23.2 2.0 1.6 1.6 2.5 0.5 3.0 3.2 3.2 68 76 75 12,890 16,700 14,720 5,410 9,220 7,240 250 250 250 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *GSWA: Galvanized Steel Wire Armoured/ **DSTA: Double Steel Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Cores XLPE Cable Cáp lõi bọc XLPE 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness Tiết diện Đường kính lõi Mm2 1.5 2.5 10 16 25 35 50 70 95 120 150 185 240 300 400 mm 1.56 2.01 2.55 3.12 4.05 4.7 5.9 6.9 8.0 9.8 11.4 12.8 14.2 15.8 18.1 20.4 23.2 Chiều dày cách mm điện 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 1.0 1.1 1.1 1.2 1.4 1.6 1.7 1.8 2.0 of Insulation (nom.) Thickness of Extruded Inner Diameter/ Thickness of Amor (nom.) Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Aluminum conductor Lõi đồng * ** GSWA * DSTA GSWA mm 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.4 1.4 1.4 1.6 1.6 1.6 ** DSTA *** UnAr GSWA DSTA *** UnAr GSWA DSTA 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.9 2.0 2.1 2.3 2.4 2.6 2.8 3,0 3.3 mm 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.9 2.0 2.1 2.3 2.5 2.6 2.8 3.0 3.2 3.5 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.9 2.1 2.3 2.4 2.6 2.7 2.9 3.1 3.4 12 13 15 16 18 20 24 27 32 35 39 44 49 54 61 68 76 mm 16 17 18 19 22 24 29 32 35 41 42 52 56 62 69 76 85 16 17 18 19 22 23 27 30 33 39 41 50 55 60 68 74 83 mm 0.9 0.2 0.9 0.2 0.9 0.2 0.9 0.2 0.9 0.2 0.9 0.2 1.6 0.2 1.6 0.2 1.6 0.2 2.0 0.2 2.0 0.5 2.5 0.5 2.5 0.5 2.5 0.5 2.5 0.5 2.5 0.5 3.15 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.4 1.4 1.4 1.6 1.6 1.6 * ** * ** *** UnAr 180 240 320 420 610 830 1,260 1,660 2,210 3,210 4,210 5,300 6,530 8,170 10,710 13,320 17,000 * GSWA Lõi nhôm ** DSTA Kg/km 440 290 530 410 630 500 760 610 990 750 1,240 1,070 2,090 1,540 2,600 1,970 3,260 2,560 4,640 3,560 5,940 5,240 7,770 6,470 9,220 7,830 11,120 9,560 14,132 12,340 17,050 15,090 22,340 18,990 *** UnAr * GSWA ** DSTA *** UnAr GSWA * DSTA 500 500 500 500 500 500 500 500 500 500 500 500 500 500 250 250 250 m 500 500 500 500 500 500 500 500 500 500 500 500 500 500 250 250 250 500 500 500 500 500 500 500 500 500 250 250 250 Kg/km 440 630 790 1,020 1,410 1,570 2,270 2,780 3,480 4,490 5,510 7,023 840 1,460 1,730 2,070 2,930 3,560 4,730 5,480 6,440 7,920 9,230 12,370 680 980 1,110 1,370 1,850 2,860 3,440 4,080 4,870 6,130 7,270 9,020 ** 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *GSWA: Galvanized Steel Wire Armoured/ **DSTA: Double Steel Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0,6/1kV Core XLPE Cable with Reduced Neutral Conductor and Phase Conductor – Cáp Tổng Pha Nominal Cross- sectional Area Tiết điện Dây pha Trung tính Thickness of insulation (nom.) Chiều dày cách điện Dây pha Trung tính Thickness of Extruded Inner Covering Diameter of Armour (nom.) Armoured Bọc giáp Armoured Bọc giáp Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of Cable- Khối lượng cáp gần Copper conductor Aluminum conductor Lõi nhôm Nominal Drum Length Phase Conductor Neultral Conductor Phase Conductor Neultral Conductor UnAr* Ar* UnAr* Ar* UnAr* mm2 mm2 mm mm mm mm mm mm mm mm Kg/km Ar* Kg/km UnAr* Kg/km Ar* Kg/km Chiều dài chuẩn m 25 35 50 70 95 120 150 185 240 300 16 16 25 35 50 70 70 95 120 150 0.9 0.9 1.0 1.1 1.1 1.2 1.4 1.6 1.7 1.8 0.7 0.7 0.9 1.0 1.0 1.1 1.1 1.1 1.2 1.4 1.0 1.0 1.0 1.2 1.2 1.2 1.4 1.4 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.5 2.5 2.5 2.5 1.8 1.8 1.8 1.9 2.1 2.0 2.5 2.5 2.7 2.9 1.8 1.8 1.9 2.1 2.2 2.3 2.5 2.7 2.9 3.0 23 25 28 33 37 42 45 51 57 63 28 30 34 39 43 48 53 58 65 71 1,130 1,430 1,940 2,710 3,670 4,720 5,620 7,100 9,280 10,740 1,940 2,300 2,950 4,210 5,330 6,750 8,180 9,950 12,560 14,270 560 680 900 1,220 1,614 2,020 2,400 3,010 3,880 3,980 1,380 1,560 1,910 2,710 3,260 3,870 4,960 5,860 7,160 7,510 500 500 500 500 500 500 500 500 500 250 300 185 1.8 1.6 1.6 2.5 2.9 3.1 64 73 11,940 15,600 4,960 8,610 250 Lõi đồng 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable ***UnAr: Unarmaoured/ **Ar: Armoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Cores PVC Cable Cáp lõi bọc PVC 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness Tiết diện Đường kính lõi Mm2 mm 1.5 1.56 Chiều dày cách mm điện 0.8 2.5 2.01 2.55 of Insulation (nom.) Thickness of Extruded Inner Diameter/ Thickness of Amor (nom.) Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Aluminum conductor Lõi đồng * GSWA ** DSTA mm * ** GSWA DSTA *** UnAr mm * GSWA DSTA ** *** UnAr mm * GSWA DSTA ** *** UnAr mm * GSWA Lõi nhôm ** DSTA *** UnAr Kg/km * GSWA DSTA ** *** UnAr GSWA Kg/km * ** DSTA m 1.0 1.0 0.9 0.2 1.8 1.8 1.8 11 15 14 130 380 255 - - - 500 500 0.8 1.0 1.0 0.9 0.2 1.8 1.8 1.8 12 16 15 170 440 300 - - - 500 500 0.8 1.0 1.0 0.9 0.2 1.8 1.8 1.8 13 18 16 225 540 385 - - - 500 500 3.12 1.0 1.0 1.0 0.9 0.2 1.8 1.8 1.8 15 19 18 285 690 460 215 520 385 500 500 10 16 4.05 4.7 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.2 0.2 1.8 1.8 1.8 1.8 1.8 1.8 16 18 21 23 19 21 370 520 850 560 1, 050 730 250 320 605 845 453 530 500 500 500 500 500 25 5.9 1.2 1.0 1.0 1.6 0.2 1.8 1.8 1.8 21 27 24 740 1,520 990 435 1,210 680 500 500 500 35 6.9 1.2 1.0 1.0 1.6 0.2 1.8 1.9 1.8 23 29 26 970 1,830 1,250 540 1,390 815 500 500 500 50 8.0 1.4 1.0 1.0 1.6 0.2 1.9 2.0 1.9 26 33 30 1,270 2,270 1,600 700 1,730 1,050 500 500 500 70 95 9.8 11.4 1.4 1.6 1.2 1.2 1.2 1.2 2.0 2.0 0.2 0.2 2.0 2.0 2.1 2.1 2.1 2.1 30 34 38 43 34 39 1,750 2,350 3,140 2,130 4,000 2,820 910 1,190 2,320 2,840 1,300 1,660 500 500 500 500 500 500 120 12.8 1.8 1.2 1.2 2.0 0.5 2.1 2.2 2.2 37 46 44 2,930 4,640 3,840 1,430 3,170 2,360 500 500 500 150 14.2 1.8 1.4 1.4 2.5 0.5 2.2 2.4 2.4 41 52 48 3,590 5,960 4,620 1,740 4,150 2,820 500 500 500 185 15.8 2.0 1.4 1.4 2.5 0.5 2.4 2.5 2.5 47 57 53 4,480 7,050 5,600 2,150 4,770 3,320 500 500 500 240 300 18.1 20.4 2.2 2.4 1.6 1.6 1.6 1.6 2.5 2.5 0.5 0.5 2.5 2.7 2.7 2.9 2.7 2.9 52 58 63 69 59 66 5,870 8,790 7,290 10,500 7,150 8,640 2,750 3,370 5,850 6,690 4,140 4,880 250 500 250 250 250 500 400 23.2 2.6 1.6 1.6 2.5 0.5 3.0 3.1 3.1 65 78 74 9,190 12,800 10,800 4,280 8,030 5,980 500 250 250 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *GSWA: Galvanized Steel Wire Armoured/ **DSTA: Double Steel Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Cores PVC Cable Cáp lõi bọc PVC 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness Tiết diện Đường kính lõi Mm2 mm 1.5 1.56 Chiều dày cách mm điện 0.8 2.5 2.01 2.55 of Insulation (nom.) Thickness of Extruded Inner Diameter/ Thickness of Amor (nom.) Thickness of PVC Outer Sheath (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Aluminum conductor Lõi đồng * ** * ** *** UnAr 1.8 1.8 12 15 14 160 420 295 - - 1.8 1.8 1.8 13 16 15 200 485 345 - 1.8 1.8 1.8 14 18 17 280 685 450 - 0.2 1.8 1.8 1.8 16 19 18 360 790 545 0.9 0.9 0.2 0.2 1.8 1.8 1.8 1.8 1.8 1.8 17 19 21 23 20 22 485 660 985 1,420 1.0 1.6 0.2 1.8 1.8 1.8 23 27 25 1.0 1.0 1.6 0.2 1.8 1.8 1.8 25 29 1.4 1.0 1.0 1.6 0.2 1.8 2.0 1.9 28 9.8 11.4 1.4 1.6 1.0 1.2 1.0 1.2 2.0 2.0 0.2 0.5 1.9 2.0 2.1 2.3 2.1 2.2 32 36 120 12.8 1.6 1.4 1.4 2.5 0.5 2.1 2.4 2.3 39 150 14.2 1.8 1.4 1.4 2.5 0.5 2.3 2.5 2.5 44 185 15.8 2.0 1.4 1.4 2.5 0.5 2.4 2.7 2.6 49 240 300 18.1 20.4 2.2 2.4 1.6 1.6 1.6 1.6 2.5 2.5 0.5 0.5 2.6 2.8 2.8 3.0 2.8 3.0 400 23.2 2.6 1.8 1.8 3.15 0.5 3.0 3.3 3.3 DSTA GSWA 1.0 1.0 0.9 0.2 1.8 0.8 1.0 1.0 0.9 0.2 0.8 1.0 1.0 0.9 0.2 3.12 1.0 1.0 1.0 0.9 10 16 4.05 4.7 1.0 1.0 1.0 1.0 1.0 1.0 25 5.9 1.2 1.0 35 6.9 1.2 50 8.0 70 95 mm DSTA *** UnAr mm * GSWA ** *** UnAr GSWA - 500 500 - - 500 500 - - 500 500 220 570 385 500 500 685 915 300 380 660 950 453 610 500 500 500 500 500 990 1,830 1,270 535 1,370 810 500 500 500 28 1,350 2,240 1,630 650 1,590 975 500 500 500 33 32 1,750 2,820 2,100 890 1,980 1,260 500 500 500 38 42 36 43 2,420 3,330 3,920 2,850 5,030 4,230 1,160 1,560 2,470 3,290 1,600 2,480 500 500 500 500 500 500 46 47 4,070 6,040 5,100 1,860 3,820 2,910 500 500 500 52 52 5,040 7,560 6,130 2,280 4,850 3,420 500 500 500 56 57 6,250 9,020 7,490 2,820 5,610 4,080 500 500 500 55 61 63 69 64 70 8,220 11,350 9,580 10,230 13,650 11,700 3,630 6,860 4,420 8,050 5,100 6,080 500 500 250 250 250 500 68 76 80 12,920 17,800 14,700 5,630 10,680 7,520 500 250 250 mm * GSWA ** DSTA *** UnAr mm * Lõi nhôm DSTA GSWA GSWA ** DSTA *** UnAr Kg/km * GSWA ** DSTA Kg/km * ** DSTA m 16mm2 to 800mm2 re normal compact round for single and multi core cable 800mm2 and above compact round segment for single cor cable *GSWA: Galvanized Steel Wire Armoured/ **DSTA: Double Steel Tape Armourd/ ***UnAr: Unarmaoured Only the halogen free cables shall be generally complied with IEC 61034 and 60754, fire resistant and flame retardant cables shall be complied with IEC 60331 and 60331 (or BS 6387 and 4066) 0.6/1(1.2)kV Cores PVC Cable Cáp lõi bọc PVC 0,6/1(1,2)kV Construction Table – Bảng Cấu Trúc ( in accordace with ICE 60502-1, 61034, 60754, IEC 60332 and 60331) 10 95 120 150 185 240 A.Alloy A.Alloy A.Alloy A.Alloy A.Alloy AAWBCC AAWBCC AAWBCC AAWBCC AAWBCC 3.5 3.5 4.0 4.0 4.0 0.360 0.280 0.220 0.180 1.140 27.9 35.3 44.1 54.4 70.6 18 19 21 23 24 385 475 570 690 820 (*) Insultion thickness include inner- semi – conducting layer ( Chiều dày cách điện bao gồm lớp bán dẫn) Contruction Table – Bảng Cấu Trúc ( 0.6/1kV PVC insulated-in accordance with IEC 60502-1, TCVN 5935) Nominal Crosssectional Area Approx Outside Diameter of Condutor Thickness of Insulation (nom.) Approx Overall Diameter Approx Weight of cable- khối lượng cáp gần Copper conductor Al conductor Lõi nhôm Lõi đồng mm2 1.5 2.5 10 16(**) 25 35 50 70 95 120 150 185 240 300 mm 1.56 (7/0.52) 2.01 (7/0.67) 2.55 (7/0.85) 3.12 (7/0.14) 4.05 (7/1.35) 4.7 5.9 6.9 8.0 9.8 11.4 12.8 14.2 15.8 18.1 20.4 mm 0.8 0.8 1.0 1.0 1.0 1.0 1.2 1.2 1.4 1.4 1.6 1.6 1.8 2.0 2.2 2.4 mm 3.4 3.8 4.8 5.3 6.3 7.3 10 12 14 16 18 20 22 25 28 Kg/km 23 34 54 75 110 175 60 360 510 700 960 1,190 1,500 1,850 2,450 3,040 75 110 145 210 270 370 460 570 700 915 1,130 (**) 16 mm2 to 500mm2 are compact round or strand (16 mm2 đđến 500mm2 lõi nén bện tròn) GV: Ground wire(Dây nối đất), Standard colour is Green(Màu chuẩn xanh lục) 23 Control Cable and Screened Control Cable (CVV, CVV-S) Cáp điều khiển cáp điều khiển có chắn (CVV, CVV-S) Contruction Table – Bảng Cấu Trúc ( in accordance with IEC 60502-1, 60227, BS 634 No of Cores Conductor – Lõi dẫn Số lõi Nom Area Tiết diện mm2 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 Structure Diameter Kết cấu Đường kính mm 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 Insulation Thickness Sheath thickness Approx Overall Diameter Chiều dày vỏ Đường kính Chiều dày CVV No/mm 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 mm 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 CVV-S CVV mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 10.0 10.5 11.0 11.5 13.0 10.5 11.5 12.0 12.5 13.5 11.0 12.0 12.5 13.5 15.0 12.5 13.0 14.0 14.5 16.0 13.5 14.0 15.0 15.5 17.5 Insulation Resistance at 200C Điện trở DC Điện trở cách điện CVV-S mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 D.C Cond Resistance at 200C 10.5 11.0 12.0 12.5 13.5 11.0 11.5 12.5 13.5 14.0 11.5 12.5 13.5 14.0 15.5 13.0 13.5 14.5 15.0 16.5 14.0 14.5 15.5 16.5 18.0 Approx Weight of Cable CVV Ω/km 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 M.Ω/Km 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 CVV-S Kg/km 125 130 150 180 210 135 160 190 225 260 165 200 235 280 330 200 240 280 340 385 210 280 330 400 455 140 160 180 230 230 160 190 220 240 290 190 230 260 315 365 230 270 325 365 420 245 310 360 435 495 24 Control Cable and Screened Control Cable (CVV, CVV-S) Cáp điều khiển cáp điều khiển có chắn (CVV, CVV-S) Contruction Table – Bảng Cấu Trúc ( in accordance with IEC 60502-1, 60227, BS 6346) No of Cores Conductor – Lõi dẫn Insulation Thickness Sheath thickness Approx Overall Diameter Chiều dày vỏ D.C Cond Resistance at 200C Insulation Resistance at 200C Điện trở DC Điện trở Approx Weight of Cable Đường kính Số lõi 10 12 15 20 30 37 Nom Area Tiết diện mm2 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 4.0 1.5 2.5 3.5 1.5 2.5 3.5 Structure Kết cấu No/mm 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.85 7/0.52 7/0.6 7/0.67 7/0.8 7/0.52 7/0.6 7/0.67 7/0.8 Diameter Đường kính mm 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 2.55 1.56 1.8 2.01 2.4 1.56 1.8 2.01 2.4 Chiều dày mm 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 1.0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 CVV CVV-S CVV mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.6 1.6 1.6 1.6 1.7 1.7 1.8 1.6 1.7 1.8 2.0 CVV-S mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.6 1.6 1.5 1.5 1.6 1.6 1.6 1.6 1.7 1.7 1.8 1.6 1.7 1.8 2.0 13.5 14.0 15.0 15.5 17.5 14.5 15.0 16.5 17.0 20.0 16.5 17.5 18.5 19.5 23.0 17.5 18.0 19.5 21.0 23.0 18.5 19.0 21.5 22.0 25.5 21.0 22.0 24.0 25.0 29.0 24.5 26.0 28.0 30.0 26.5 29.5 30.0 36.0 14.0 14.5 15.5 16.5 18.0 15.0 15.5 16.5 17.5 20.5 17.0 18.0 19.0 21.0 23.5 18.0 18.5 20.0 21.5 23.5 19.0 19.5 22.0 23.0 26.0 21.5 22.5 24.5 25.5 29.0 25.0 27.0 29.0 31.0 27.0 30.0 31.0 37.0 CVV Ω/km 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 4.61 12.1 9.24 7.41 5.20 12.1 9.24 7.41 5.20 M.Ω/Km 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 250 300 355 430 500 280 355 410 500 585 355 430 485 630 720 410 490 454 720 825 485 575 650 855 1,020 620 735 875 1,130 1,320 880 1,100 1,250 1,670 1,060 1,300 1,510 2,160 CVV-S Kg/km 285 335 390 475 540 320 375 445 535 625 400 465 520 675 775 455 530 595 765 880 540 630 700 930 1,070 680 790 930 1,190 1,385 955 1,140 1,300 1,730 1,140 1,390 1,600 2,280 25 0.6/1(1.2)kV Aerial Bundled Cable Cáp vặn xoắn 0,6/1(1.2)kV-ABC Among the tests given by AS 3560 and TCVN 6447, the adhesion of insulation test is the most difficult test By applying modem technology, 100% our aerial bundled cables pass the test and widely used in Autralian market Trong số phép thử đưa tiêu chuẩn AS 3560 TCVN 6447, hạng mục kiểm tra độ bám dính lớp cách điện khó với công nghệ đại, 100% cáp vặn xoắn thỏa mãn hạng mục sử dụng rộng rãi thị trường Autralia Contruction Table – Bảng Cấu Trúc (Figure 1: Self support type-in accordance with AS 33560) Cond Size No.of Core mm2 16 25 35 50 70 95 120 150 4 4 4 4 Maximum Diameter Đường kính lớn Condutor Insulated Cable dia core Lõi dẫn điện Lõi cách Cáp điện mm mm mm 15.8 4.8 7.9 17.1 19.1 18.4 6.1 9.2 19.9 22.2 20.6 7.2 10.3 2.22 24.9 23.8 8.4 11.9 25.7 28.7 27.2 10.1 13.6 29.4 32.8 11.9 15.9 13.5 17.5 14.9 18.9 31.8 34.3 38.4 35.0 37.8 42.2 37.8 40.8 45.6 Number of wire Thickness of insulation Approx mass DC Resistance at 200C Permissible Current Min.Breaking strengh No mm Ω/km 1.3 1.3 1.3 1.5 19 1.5 Kg/km 0.14 0.21 0.28 0.20 0.30 0.40 0.26 0.39 0.52 0.35 0.53 0.70 0.48 0.72 0.96 A 96 78 78 125 105 105 155 125 125 185 150 150 225 185 185 kN 4.4 6.6 8.8 7.0 10.5 14.0 9.8 14.7 19.6 14.0 21.0 28.0 19.6 29.4 39.2 19 1.7 19 1.7 19 1.7 285 225 225 315 260 260 350 285 285 26.6 39.9 53.2 33.6 50.4 67.2 42.0 63.0 84.0 0.68 1.01 1.35 0.83 1.25 1.66 1.01 1.52 2.02 1.91 1.2 0.868 0.641 0.443 0.320 0.253 0.206 26 0.6/1(1.2)kV Aerial Bundled Cable Cáp vặn xoắn 0,6/1(1.2)kV-ABC Contruction Table – Bảng Cấu Trúc (Figure 1: Messenger type-in accordance with AS 33560, IEC 60502) Cond.size Maximum Diameter Đường kính lớn Tiết diện Phase core Dây pha mm2 2x50 + 50 3x50 + 50 3x70 + 50 3x95 + 70 3x120 +70 3x150 + 70 mm 8.4 8.4 8.4 11.9 13.5 14.9 Neutral core Trung bình mm 9.5 9.5 9.5 10.7 10.7 10.7 Thickness of insulation Chiều dài cách điện Phase Neutral core core Dây pha Trung bình mm mm 1.5 1.5 1.5 1.5 1.7 1.5 1.7 1.5 1.7 1.5 1.7 1.5 Approx Diameter Approx Weight DC resistance Điện trở DC 200C Đường kính Khối Phase core Dây pha mm 26 29 32 36 38 41 Kg/km 590 785 895 1,210 1,430 1,665 Ω/km 0.641 0.641 0.443 0.320 0.253 0.206 Neutral core Trung bình Ω/km 0.65 0.65 0.65 0.508 0.508 0.508 Permissibl e Current A 150 150 185 225 260 285 Min.breaking strength Lực kéo đứt nhỏ Phase Neutral core core Dây pha Trung bình kN kN 7.0 16.6 7.0 16.6 9.8 16.6 13.3 20.5 16.8 20.5 21.0 20.5 Contruction Table – Bảng Cấu Trúc (Figure 1: Cu Condutor-ABC-in accordance with IEC 60228, 60502,AS 33560) Cond.size mm2 10 16 25 35 No.of Core mm 4 4 Maximum Diameter Đường kính lớn Condutor Insulated Cable dia core Lõi dẫn Cáp điện Lõi cách điện mm mm mm 13.2 3.75 6.6 14.3 16.0 15.0 4.65 7.5 16.2 18.2 17.4 5.9 8.7 18.8 21.1 19.6 7.0 9.8 21.2 23.7 Number of wire Thickness of insulation Approx.mass DC resistance Min.breaking strength Điện trở DC No Kg/km 1.3 1.3 1.3 1.3 kN 215 325 430 235 490 655 500 750 995 675 1,015 1,355 Ω/km 1.83 1.15 0.727 0.524 kN 7.4 11.1 14.8 12.0 18.0 24.0 18.8 28.2 37.6 26.4 39.6 52.8 27 0.6/1(1.2)kV Core MUYLER Cable Cáp MUYLER 0,6/1(1.2)kV Contruction Table – Bảng Cấu Trúc ( PVC insulation Cables-in accordance with IEC 60502-1) Nominal area of phase cable conductor Tiết diện danh định lõi cáp Structure of condutor Thickness of insulation Thickness of Inner sheath Aluminum tape thickness Thickness of outer sheath Approx overall Diameter DC resistance at 200C Approx Mass of cable Kết cấu lõi Chiều dày cách điện Chiều dày bọc Chiều dày băng nhôm Chiều dày vỏ bọc Đường kính Điện trở DC Khối lượng cáp gần mm2 11 16 25 No./mm 7/0.85 7/1.18 7/1.40 7/1.70 7/2.13 mm 1.0 1.0 1.0 1.0 1.2 mm 1.0 1.0 1.0 1.0 1.0 mm 0.2 0.2 0.2 0.2 0.2 mm 1.8 1.8 1.8 1.8 1.8 mm 15.3 17.0 18.5 20.5 23.5 Ω/km 4.61 2.60 1.70 1.15 0.727 Kg/km 295 390 495 635 890 Contruction Table – Bảng Cấu Trúc ( XLPE insulated Cables-in accordance with IEC 60502-1) Nominal area of phase cable conductor Tiết diện danh định lõi cáp Structure of condutor Thickness of insulation Thickness of Inner sheath Aluminum tape thickness Thickness of outer sheath Approx overall Diameter DC resistance at 200C Approx Mass of cable Kết cấu lõi Chiều dày cách điện Chiều dày bọc Chiều dày băng nhôm Chiều dày vỏ bọc Đường kính Điện trở DC Khối lượng cáp gần mm2 11 16 25 No./mm 7/0.85 7/1.18 7/1.40 7/1.70 7/2.13 mm 0.7 0.7 0.7 0.7 0.9 mm 1.0 1.0 1.0 1.0 1.0 mm 0.2 0.2 0.2 0.2 0.2 mm 1.8 1.8 1.8 1.8 1.8 mm 14.0 15.5 17.5 19.0 22.5 Ω/km 4.61 2.60 1.70 1.15 0.727 Kg/km 250 340 440 575 820 28 Current Rating for Low Votage Insulated Cable Dòng điện định mức cho cáp bọc hạ (Ampere) Table 1: PVC insulated cable – Cáp bọc cách điện PVC (in accordance to IEC 287) Condutor Lõi điện Nominal Cross-sectional Area Installation methods Phương pháp lắp đặt Two loaded conductors Hai lõi Three loaded conductor Ba lõi Tiết diện danh định lõi (mm2) 1.5 2.5 10 16 25 35 50 70 95 120 150 185 240 300 10 16 25 35 50 70 95 120 150 185 240 300 19.5 27 36 46 63 85 112 138 168 213 258 299 344 392 451 530 49 66 83 103 125 160 195 226 261 298 352 406 22 29 38 47 63 81 104 125 148 183 216 246 278 312 361 408 48 62 80 96 113 140 166 189 213 240 277 313 17.5 24 32 41 57 76 96 119 144 184 223 259 299 341 403 464 44 59 73 90 110 140 170 197 227 259 305 251 18 24 31 39 52 67 86 103 122 151 179 203 230 258 297 336 40 52 66 80 94 117 138 157 178 200 230 260 NOTE: Operating tempurature of condutor (Nhiệt độ làm việc lõi): 700C Ambient tempurature (Nhiệt độ môi trường): 300C Tempurature of ground (Nhiệt độ đất): 200C Circular conductors are assumed for sizes up to and including 16mm2 Values for larger sizes ralate to shaped conductors and may safely be applied to circular conductor (Áp dụng cho lõi tròn đến 16mm2 Cỡ lõi lớn liên quan đến hình dạng lõi an toàn áp dụng cho lõi tròn) 29 Current Rating for Low Votage Insulated Cable Dòng điện định mức cho cáp bọc hạ (Ampere) Table 2: PVC insulated cable – Cách bọc cách điện PVC (in accordance with IEC 287) Nominal cross-sectional area of conductor Conductor Copper conductor Aluminum conductor Tiết diện danh 1.5 2.5 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Installation menthods – phương pháp lắp đặt Single-core cables-Cáp đơn pha Multi-core cables-Cáp nhiều lõi Two loaded Three Three loaded Three loaded Three loaded conductors, flat-3 Cáp thẳng conductors loaded conductors conductors Spaced – Cách conductors touching trefoil Touching Horizontal Vertical Hai lõi Ba lõi Ba lõi chạm Ba lõi Chạm tam giác Ngang Thẳng đứng 22 30 40 51 70 94 119 148 180 232 282 328 379 434 514 593 54 73 89 111 135 173 210 244 282 322 380 439 - 18.5 25 34 43 60 80 101 126 153 196 238 276 319 364 430 497 46 61 78 96 117 150 183 212 245 280 330 381 - 131 162 196 251 304 352 406 463 546 629 754 868 1005 98 122 149 192 235 273 316 363 430 497 600 694 808 110 137 167 216 264 308 356 409 485 561 656 749 855 84 105 128 166 203 237 274 315 375 424 526 610 808 114 143 174 225 275 321 372 427 507 587 689 789 905 87 109 133 173 212 247 287 330 392 455 552 640 746 146 181 219 281 341 396 456 521 615 709 852 982 1138 112 139 169 217 265 308 356 407 482 557 671 775 900 130 162 197 254 311 362 419 480 569 659 795 920 1070 99 124 152 196 241 282 327 376 477 519 629 730 852 NOTE: Operating tempurature of condutor (Nhiệt độ làm việc lõi): 700C Ambient tempurature (Nhiệt độ môi trường): 300C Tempurature of ground (Nhiệt độ đất): 200C Circular conductors are assumed for sizes up to and including 16mm2 Values for larger sizes ralate to shaped conductors and may safely be applied to circular conductor (Áp dụng cho lõi tròn đến 16mm2 Cỡ lõi lớn liên quan đến hình dạng lõi an toàn áp dụng cho lõi tròn) D: is the extermal diameter of the cable (D: đường kính cáp) 30 Current Rating for Low Votage Insulated Cable Dòng điện định mức cho cáp bọc hạ (Ampere) Table 3: XLPE insulated cable – Cách bọc cách điện XLPE (in accordance with IEC 287) Condutor Lõi điện Nominal Cross-sectional Area Installation methods Phương pháp lắp đặt Two loaded conductors Hai lõi Three loaded conductor Ba lõi Tiết điện danh định lõi (mm2) 1.5 2.5 10 16 25 35 50 70 95 120 150 185 240 300 10 16 25 35 50 70 95 120 150 185 240 300 24 33 45 58 80 107 138 171 209 269 328 382 441 506 599 693 62 84 101 126 154 198 241 280 324 371 439 508 26 34 44 56 73 95 121 146 173 213 252 287 324 363 419 474 56 73 93 112 132 163 193 220 249 279 322 364 22 30 40 52 71 96 119 147 179 229 278 322 371 424 500 576 57 76 90 112 136 174 211 245 283 323 382 440 22 29 37 46 41 79 101 122 144 178 211 240 271 304 351 396 47 61 78 94 112 138 164 186 210 236 272 308 NOTE: Operating tempurature of condutor (Nhiệt độ làm việc lõi): 900C Ambient tempurature (Nhiệt độ môi trường): 300C Circular conductors are assumed for sizes up to and including 16mm2 Values for larger sizes ralate to shaped conductors and may safely be applied to circular conductor (Áp dụng cho lõi tròn đến 16mm2 Cỡ lõi lớn liên quan đến hình dạng lõi an toàn áp dụng cho lõi tròn) 31 Current Rating for Low Votage Insulated Cable Dòng điện định mức cho cáp bọc hạ (Ampere) Table 4: XLPE insulated cable – Cách bọc cách điện XLPE (in accordance with IEC 287) Nominal cross-sectional area of conductor Conductor Copper conductor Aluminum conductor Tiết diện danh 1.5 2.5 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Installation menthods – phương pháp lắp đặt Single-core cables-Cáp đơn pha Multi-core cables-Cáp nhiều lõi Two loaded Three Three loaded Three loaded Three loaded conductors, flat-3 Cáp thẳng conductors loaded conductors conductors Spaced – Cách conductors touching trefoil Touching Horizontal Vertical Hai lõi Ba lõi Ba lõi chạm Ba lõi Chạm tam giác Ngang Thẳng đứng 26 36 49 63 86 115 149 185 225 289 352 410 473 542 641 741 67 91 108 135 164 211 257 300 346 397 409 491 - 23 32 42 54 75 100 127 158 192 246 298 346 399 456 538 621 58 77 97 120 146 187 227 263 304 347 409 471 - 161 200 242 310 377 437 504 575 679 783 940 1083 1254 121 150 184 237 289 337 389 447 530 613 740 856 996 135 169 207 268 328 383 444 510 607 703 823 946 1088 103 129 159 206 253 296 343 395 471 547 663 770 899 141 176 216 279 342 400 461 533 634 736 868 998 1151 107 135 165 215 264 308 358 413 492 571 694 806 942 182 226 275 353 430 500 577 661 781 902 1085 1253 1454 138 172 210 271 332 387 448 515 611 708 856 991 1154 161 201 246 318 389 454 527 605 719 833 1003 1169 1362 122 153 188 244 300 351 408 470 561 662 792 921 1077 NOTE: Operating tempurature of condutor (Nhiệt độ làm việc lõi): 700C Ambient tempurature (Nhiệt độ môi trường): 300C Tempurature of ground (Nhiệt độ đất): 200C Circular conductors are assumed for sizes up to and including 16mm2 Values for larger sizes ralate to shaped conductors and may safely be applied to circular conductor (Áp dụng cho lõi tròn đến 16mm2 Cỡ lõi lớn liên quan đến hình dạng lõi an toàn áp dụng cho lõi tròn) D: is the extermal diameter of the cable (D: đường kính cáp) 32 Current Rating for XLPE Insulated Cable 3.6/6(7.2)kV to 20/35(40.5)kV Dòng điện định mức cho cáp bọc XLPE từ 3,606(7,2)kV đến 20/35(40,5)kV (Ampere) Table 5: Single-core cables – Cáp đơn pha (in accordance with ICE 287) Nominal cross- 16 25 35 50 70 95 120 150 185 240 300 400 16 25 35 50 70 95 120 150 185 240 300 400 Buried direct in the ground Trôn trực tiếp Installation menthods – phương pháp lắp đặt In single-way ducts Lắp ống đơn Trefoil Tam giác Trefoil duct Ống tam giác 109 140 166 196 239 285 323 361 406 469 526 590 84 108 129 152 186 221 252 281 317 367 414 470 Flat spaced Cách phẳng 113 144 172 203 246 293 332 366 410 470 524 572 88 112 134 157 192 229 260 288 324 367 414 466 103 132 157 186 227 271 308 343 387 447 504 564 80 102 122 144 176 210 240 267 303 373 419 466 Flat touching ducts Phẳng 104 133 159 188 229 274 311 347 391 453 510 571 81 103 123 146 178 213 242 271 397 356 402 457 In air Trong không khí Trefoil Tam giác Flat touching Phẳng chạm Flat spaced Cách phẳng 128 167 203 243 303 369 426 481 550 647 739 837 99 130 157 189 236 287 332 376 432 511 586 676 150 196 238 286 356 434 500 559 637 745 846 938 116 153 185 222 278 338 391 440 504 593 677 769 125 163 198 238 296 361 417 473 543 641 735 845 97 127 154 184 230 280 324 368 424 502 577 673 NOTE: Max Tempurature of conductor (Nhiệt độ làm việc lõi): 900C Ambient tempurature (Nhiệt độ môi trường): 300C Ground tempurature (Nhiệt độ đất): 200C Dept of playing (Độ sâu lắp đặt): 0.8m Thermal resistivity of soil (Nhiệt trở đất): 1.5K.m/W Thermal resistivity of earthenware ducts (Nhiệt trở ống đất): 1.2Km/W Screens bonded at both ends (Hai đầu chắn nối đất) Current rating calculated of cables having a rated voltage of 6/10kV (Dòng điện tính toán dựa cáp có điện áp 6/10kV) Current Rating for XLPE Insulated Cable 3.6/6(7.2)kV to 20/35(40.5)kV Dòng điện định mức cho cáp bọc XLPE từ 3,606(7,2)kV đến 20/35(40,5)kV (Ampere) (in accordance with ICE 287) 33 Table 6: Armoured and unarmoured three-core cables – Cáp ba pha có giáp không giáp Nominal cross-sectional Buried direct in the ground Trôn trực tiếp 16 25 35 50 70 95 120 150 185 240 300 400 16 25 35 50 70 95 120 150 185 240 300 400 101 129 153 181 221 262 298 334 377 434 489 553 78 100 119 140 171 203 232 260 294 340 384 438 Installation menthods – phương pháp lắp đặt Urmoured Armoured Cáp giáp Cáp có giáp In a buried ducts In air Buried direct In a buried ducts Trong ống Trong không khí in the ground Trong ống đất đất Trôn trực tiếp 87 112 133 158 193 231 264 297 336 390 441 501 67 87 103 122 150 179 205 231 262 305 346 438 109 142 170 204 253 304 351 398 455 531 606 696 84 110 132 158 196 236 273 309 355 415 475 552 101 129 154 181 220 263 298 332 371 431 482 541 78 100 119 140 171 204 232 259 293 338 380 432 88 112 134 158 194 232 264 296 335 387 435 492 68 87 104 123 150 180 206 231 262 304 343 393 In air Trong không khí 110 143 172 205 253 307 352 397 453 529 559 683 85 111 133 159 196 238 274 309 354 415 472 545 NOTE: Max Tempurature of conductor (Nhiệt độ làm việc lõi): 900C Ambient tempurature (Nhiệt độ môi trường): 300C Ground tempurature (Nhiệt độ đất): 200C Dept of playing (Độ sâu lắp đặt): 0.8m Thermal resistivity of soil (Nhiệt trở đất): 1.5K.m/W Thermal resistivity of earthenware ducts (Nhiệt trở ống đất): 1.2Km/W Screens bonded at both ends (Hai đầu chắn nối đất) Current rating calculated of cables having a rated voltage of 6/10kV (Dòng điện tính toán dựa cáp có điện áp 6/10kV) Current Rating for Low Votage Insulated Cable Dòng điện định mức cho cáp bọc hạ (Ampere) 34 Table 7: Correction factors for ambient air temperatures other than 300C Hệ số biến đổi theo nhiệt độ môi trường khác 300C Ambient air tempurature(0C) Nhiệt độ môi trường Maximum condutor tempurature Nhiệt độ lõi lớn C Insulation Cách điện 20 25 35 40 45 50 55 60 90 XLPE 1.08 1.04 0.96 0.91 0.87 0.82 0.71 0.71 70 PVC 1.12 1.06 0.94 0.87 0.79 0.71 0.61 0.5 Table 8: Correction factors for ambient ground temperatures other than 200C Hệ số biến đổi theo nhiệt độ đất khác 200C Maximum condutor tempurature Nhiệt độ lõi lớn Insulation 90 70 Ambient air tempurature(0C) Nhiệt độ môi trường 10 15 25 30 35 40 45 50 XLPE 1.07 1.04 0.96 0.93 0.89 0.85 0.8 0.76 PVC 1.1 1.05 0.95 0.89 0.84 0.77 0.71 0.63 Table 9: Correction factors for depths of laying other than 0.8m for direct buried cables Hệ số biến đổi theo độ sâu lắp đặt khác 0,8m cho cáp chôn trực tiếp Depth of laying Độ sâu lắp đặt 0.5 0.6 1.25 1.5 1.75 2.5 Single-core cables Cáp đơn pha Nominal conductor size (mm2) Cỡ lõi 185 mm2 >185 mm2 1.04 1.06 1.02 1.04 0.98 0.97 0.96 0.95 0.95 0.93 0.94 0.91 0.93 0.90 0.91 0.88 0.90 0.86 Three-core cales Cáp ba pha 1.04 1.03 0.98 0.96 0.95 0.94 0.93 0.91 0.90 Table 10: Correction factors for depths of laying other than 0.8m for cables in ducts Hệ số biến đổi theo độ sâu lắp đặt khác 0,8m cho cáp đặt ống Depth of laying Độ sâu lắp đặt 0.5 0.6 1.25 1.5 1.75 2.5 Single-core cables Cáp đơn pha Nominal conductor size (mm2) Cỡ lõi 185 mm2 >185 mm2 1.04 1.05 1.02 1.03 0.98 0.97 0.96 0.95 0.95 0.93 0.94 0.92 0.93 0.91 0.91 0.89 0.90 0.88 Three-core cales Cáp ba pha 1.03 1.02 0.99 0.97 0.96 0.95 0.94 0.93 0.92 Cable Handling and Insulation 35 Lắp đặt nâng hạ cáp Permissible maximum pulling tension of power cable – Lực kéo lớn cho cáp lực Using pulling eye-dùng đầu kẹp Copper conductor cable Cáp lõi đồng Using barket grip-dùng giỏ kẹp 7.0x (Cross-sectional area of each conductor in mm2 x (Number of conductors) (kgs) 7.0x (Tiết điện lõi dẫn-mm2)x số lõi (kg) Cáp lõi nhôm Aluminium conductor cable 1.0x (Cross-sectional area sheath in mm2) (kg) The length of basket grip over sheath shall be not less then 500mm In case of PVC sheath Đối với vỏ PVC 1.0x (Tiết điện vỏ mm2) (kg) 4.0x (Cross-sectional area of each conductor in mm2 x (Number of conductors) (kgs) 4.0x (Tiết điện lõi dẫn-mm2)x số lõi (kg) NOTE: The maximum pulling tension for small size cable shall be especially kept within the permissiblelimit to rprevent conductor break or elongation of conductor As the pulling tension increases rapidly in bending part due to the pressure against inner wall of duct, special attention shall be paid to avoid sharp bend in installing Avoid to install a cable along the route like a letter “S” In route with a bend, install a cable from the side of a bend to lower the tension Lực kéo lớn cho cáp nhỏ phải nằm giới hạn cho phép tránh dứt lõi hay giãn dài lõi Khi kéo cáp qua đoạn máng cáp uốn cong, lực kéo phải lớn bình thường, cần đặt biệt ý tránh đoạn uốn sắc nhọn Tránh lắp đặt cáp dọc theo tuyến hình chữ “S” Trong tuyến với khúc uốn, lắp đặt cáp từ cạnh khúc uốn tới lực kéo thấp Minium bending radius – Bán kính uốn cong nhỏ nhất: Power cables without metallic shielding: The minimum bending radius or Both single and multiple-conductor cable with or without lead sheath and without metallic shielding tapes are as follows Cáp lực chắn kim loại: bán kính uốn cong nhỏ cho cáp đơn có vỏ chì băng chắn kim loại đưa đây: Minimum bending radius as a multiple of cable diameter – Bán kính cong nhỏ bội số đường kính cáp Thickness of conduor Insulation Overall diameter of cable – Đường kính cáp Chiều dày cách điện lõi 25.4 mm and less 3.9 mm nhỏ Từ 4.0: 7.9 mm 8.0 mm - Power cables with metallic shielding or Tape and Wire Armoured Cable: The minumum beding radius for all cable with metallic shielding is twelve times the overall diameter of the completed cable 25.4 to 50.8 mm 50.8 mm and over Cáp lực chắn kim loại cáp có giáp sợi hay băng: bán kính uốn cong nhỏ cho cáp có chắn kim loại 12 lần đường kính cáp 36 37