Off course…Reported missing… Overdue… These are chilling words
Trang 1EMS TECHNOLOGIES
Location, Location
Off course… Reported missing… Overdue… These are chilling words The lives of those in distress, and of those who risk their lives to save them, depend on the accurate and timely determination of the distress location Detection and location determination of Cospas-Sarsat alerts are the primary functions of the EMS LEOLUT 600
The LEOLUT 600 is based on over 20 years of EMS experience in the design and evolution of LEOLUT technology The LEOLUT 600 uses industry standard components to provide mission critical reliability, and scalability to ensure years of continued service
A fully automated high performance satellite earth station, the LEOLUT 600 monitors, receives and processes distress signals relayed from COSPAS-SARSAT satellites After each satellite pass, it processes the signals from emergency beacons to update location information The LEOLUT 600 monitors time and frequency data
to detect and locate the active beacon, and then sends location co-ordinates and other pertinent information to the Mission Control Center for analysis and distribution to SAR resources A key function of the EMS LEOLUT 600 is its ability to internally maintain satellite orbit data
EMS LEOLUTs are the only LUTs in the world today that can perform combined LEO/GEO processing as defined in the COSPAS-SARSAT specifications LEO/GEO processing can improve the determined beacon location accuracy by using data received from a GEOLUT In some instances, this combined processing can provide beacon location solutions when LEOLUT processing alone cannot
The EMS LEOLUT 600 and GEOLUT 600 systems work together to provide a comprehensive SAR system With their advanced combined LEO/GEO processing functionality, these EMS systems provide SAR users with response capabilities unmatched by any other system provider
The LEOLUT 600 is a
fully-automated high
performance satellite
ground station that receives
and processes distress alerts
from SARSAT and COSPAS
satellites, determines the
beacon location, and
forwards data to search and
rescue forces
1725 Woodward Drive
Ottawa, Ontario K2C 0P9
Phone: (613) 727 - 1771
Fax: (613) 727- 8633
LEOLUT 600
Trang 2LEOLUT 600
LEOLUT 600 System
The storage capacity of the LEOLUT 600 is fully configurable to meet user needs, and is sufficient to exceed the data requirements for Cospas-Sarsat data analysis
LUT Hardware
Compaq Dual Pentium Processor EMS Phased Array LEOLUT Antenna GPS Clock
The LEOLUT 600 builds upon the quality
standards of earlier models while
incorporating the most current technology A
powerful industry standard computer and
custom software provides the advanced
digital signal processing required for complex
SAR data Its modular hardware and
software architecture facilitates scalability
and ease of enhancements Proven
reliability, a reduced parts count, and use of
Commercial Off-The-Shelf components are
examples of EMS’ commitment to keep the
LEOLUT 600 at the forefront of LUT
technology
The EMS LEOLUT 600 is the most
feature-rich, comprehensive LEOLUT available
today Based on the proven ATLUT
technology, which demonstrated a 99.9%
reliability factor, the LEOLUT 600 provides
maximum performance and dependability
that is critical for rescue operations
The LEOLUT 600 can function alone or in a
dual LUT configuration In a dual LEOLUT
configuration, two LEOLUT 600s are used to
optimize satellite coverage of a region The
LEOLUTs coordinate their pass schedules
to ensure that the maximum number of
satellites are tracked This configuration has
proven itself in providing fast ambiguity
resolution in distress situations, especially
near the equator where fewer satellite may
be seen
Many LEOLUT 600 systems can be grouped
into a network to provide coordinated
coverage of a larger national region
For more information please contact: empsales@emstechnologies.ca