CASE STUDY DESIGNING

G Y N I D N U T G I S S E S DE CA PRESENTED BY : KHUSHBOO KHUNTWAL B Sc FT 1ST YEAR DIPLOMA FASHION TECHNOLOGY DESCRIPTION OF GARMENT CASE STUDY : 11 Pieces Topper and skirt, Topper with attached Epaulette sleeve with sleeve band and round neck, basic straight skirt attached with waist belt FABRICS Cotton Polyester, Cotton, SUITABLE:soft Denim Blended fabric UNSUITABLE:- Silk ,Nylon ,Hosiery Organdy NOTIONS metallic hooks metallic eyes metallic zipper 4” IMPERIAL METRIC MEASUREMENTS : SMALL 80 60 87.5 MEDIUM 85 66.1/4 90 LARGE 90 70 95 SMALL 32” 24” 35” MEDIUM 34” 261/2” 36” LARGE 36” 28” 38” 90 77.5 97.5 10 95 35 20 95 83.3/4 101.1/4 10.5 98.5 35 20 34” 29” 36” 31” 39” Shoulder Width Dress length waist length Sleeve Length 85 72.5 92.5 10 92.5 33.5 20 38” 331/2” 401/2” 4.2” 39.4” 14” 8” FABRIC NEEDED:- METRIC 258.75 BODY MEASUREMENT ROUND CHEST ROUND WAIST ROUND HIP GARMENT MEASUREMENT CHEST WAIST HIP Dezyne E’Cole College,Ajmer 37” 13.4” 8” 4” 38” 14” 8” IMPERIAL 103.5" 4” 37” Submitted By :Khushboo Khuntwal 1st Year Diploma FT DETAIL OF DRESS In this case study I have given the details of the design ,and have included the following details :- Flat Design :- An hour glass silhouette The top is a basic bodice with short sleeves having epaulette design variation The neckline is round and the hemline is straight The skirt is a basic straight skirt with a 2’’waist band Measurements :- The measurement chart for a medium (34’’) size, female Seam allowances have also been given Notions :- Zips, buttons, threads, and other requirements are given in details Drafting Patterns :- 11 patterns are required for drafting They are in 1/8’’ Scale Estimation Sheet :- 103.5”meter of total fabric is required for the constriction of the garment Fabric :- Blended cotton fabric are used {65% cotton and 35% polyester } Color :- white with blue stripe top {upper part} blue with white stripe skirt & sleeve {lower part } Seams :- welt, single top, plain seam are used Design Variation :- in seams, fabric, color, and design that can be given DESIGN VARIATION The variations that could be made in the design are Fabric :- Which can be used : Cotton blends Voile, Jorgettes, Chiffons soft denims, Blended fabrics, self woven fabrics Which should be avoided: Wool, Brocades, Tusser silk, Linen, Woolen blends, , seam, Welt, Seams :- Double top seam, French seam, Abutted and Closed slot seam Color :- A wide range of colored fabrics can be used All Whites, muted, pastels, and pale colors can be used for the top’ Whereas dark shades and tones of different colors can be used Prints :- Floral and geometrical prints can be used in the top In the skirt we can use horizontal, vertical or diagonal stripes checks :- even or uneven Design Variation: epaulette variation applique work plain sleeve sleeve bend embrodreyed patch work a line hem waist belt front dart a line hem line DEZYNE E’ COLE GARMENT CONSTRCAT ION CASE STUDY NUMBER - STYLE NOUMBER FABRIC TYPE – BLENDED FABRIC PRODUCT TYPE – WOMENS WEAR DESIGN OF GARMENT FRONT PART COLOUR – WHITE WITH BLU E STRIP, BLUE WITH WHITE STRIP YARDEGE OF FABRIC – 36” SAMPEL SIZE – 34” MEDIAM SIZE DESIGN OF GARMENT BACK PART MEASUREMENTS REQUIRED TOPPRE FRONT & BACK SEAM ALLOUNCE SKIRT BELT ½” SKIRT BOTTOM FOLDING 1” DRESS LENGTH 38” SHOULDER ¾” FRONT LENGTH 171/2” NECK LINE ¼” BACK LENGTH 171/2” ARM HOLE ¼” CENTER FRONT LENGTH 14½” SIDE SEAM ½” CENTER BACK TO PRINCESS LINE CENTER FRONT TO PRINCESS LINE BUST 5/8 TOPEER BO TTOM FOLDING 1” ¾” EAPULETTE SACTION ½” 34” SLEEVE BEND ½” WAIST 26” ACROSS FRONT 15” ACROSS BACK 171/4” SHOULDER WIDTH 4” NECK DEPTH FRONT 4” NECK DEPTH BACK 3” APEX MEASURMENT ¾” REMARKS SEAMS SINGLE TOP, WELT SEAM HEAM LINE STRIGHT HEM LINE EDGE FINISHING PIPING SHOULDER BLEAD 7” NECK SHULDER TO WAIST LINE 14¾” SLEEVE BEND WELT SEAM FRONT WAIST LINE 13½” TOPPER EDGE BACK WAIST LINE 12” SKIRT HEM SINGLE TOP SEAM SINGLE TOP SEAM TOP SEAM SKIRT BELT NEEDSLE NO SLEEVE FRONT & BACK 16 NEEDLE SIZE SLEEVE LENGTH EPAULETTE FRONT & BACK 8” 3” THREAD COLOUR BICEP CURCUMFERENCE 12 ½” THREAD NO WHITE 081 SLEEVE BAND 2” THREAD MATERIAL STITCH PER INCH PIN COTTON POLYESTR 10 DRESS MAKER SIZE 25MM.&L.30MM SKIRT FRONT & BACK PART SKIRT LENGTH 21” HIP LEINGTH 7” FRONT DART LENGTH ½” BACK DART LENGTH ½” SPACE OF BOTH SIDE DART FRONT SPACE OF BOTH SIDE DART BACK FRONT &BACK HIP LINE 5” WAIST BELT WIDTH 2” FRONT WAIST LINE ¾” BACK WAIST LINE 6” C F PRINCESS LINE ¾” C.B PRINCESS LINE 5/8” 4.7 3/8” TRIMS HOOK & EYE ZIPPER ZIPPER SIZE 4” LENGTH TYPE OF MATIRIYEL METALLIC 2D PATTERNS OF DRESS WITHOUT SEAM PATTERN WITH SEAM PATTERN {NOTE:-TOP NECK, SLEEVE CURVE, ARMHOLE, AND SKIRT DARTS SEAM ARE USED 1/4”SEAMAND SHOULDER, HEM, SIDE SEAM, BELT, BOTH SECTION OF SLEEVE ARE USED 1/2”SEAM.} LAYOUT OF DRESS LAYOUT OF TOP AND SLEEVE BEND LENGTH OF FABRIC 33.5” WIDTH OF FABRIC 36” LAYOUT OF SKIRT AND SLEEVE LENGTH OF FABRIC 70” WIDTH OF FABRIC 36” ESTIMATION OF FABRIC UPPER & LOWER PART LENGTH OF FABRIC FOR SLEEVE AND SKIRT BLUE WITH WHITE STRIPE FABRIC 70”(175 C M.) LENGTH OF FABRIC FOR TOP AND SLEEVE BEND WHITE WITH BLUE STRIPE FABRIC 33.5” (83 75 C M.) TOTAL LENGTH OF FABRIC 103.5” METER (258.75 C M ) SPECIFICATION SHEET FRONT PART neck depth 4” neck finished with piping 1”& attached with single top seam epaulette sleeve sleeve bend 1” wide & attached with welt seam topper hem finished with single top seam 2”waist belt finished with metallic hook & eye slit opening finished with metallic zipper 4” front dart length 1/2” right & left side dart width 5” straight hemline finished with single top seam BACK PART neck depth 3” neck finished with piping 1”& attached with single top seam epaulette sleeve sleeve bend 1” wide & attached with welt seam topper hem finished with single top seam 2”waist belt finished with metallic hook & eye slit opening finished with metallic zipper 4” back dart length 1/2” right & left side dart width 4.12” flare hemline finished with single top seam PRODUCT SPECIFICATION OF DRESS ROUND NECK LINE FINESSED WITH PIPING SLEEVE BEND WELT SEAM SINGLE TOP SEAM {.5 PRESER FOOT} COTTON POLYESTER FABRIC STRIAGHT HEM COTTON POLYESTER WAIST BELT FRONT & BACK DART METALLIC ZIPPER STRIPED FABRIC SINGLE TOP SEAM STRAIGHT HEMLINE FINESSED WITH SINGLE TOP SEAM ...DESCRIPTION OF GARMENT CASE STUDY : 11 Pieces Topper and skirt, Topper with attached Epaulette sleeve with sleeve band and... IMPERIAL 103.5" 4” 37” Submitted By :Khushboo Khuntwal 1st Year Diploma FT DETAIL OF DRESS In this case study I have given the details of the design ,and have included the following details :- Flat... patch work a line hem waist belt front dart a line hem line DEZYNE E’ COLE GARMENT CONSTRCAT ION CASE STUDY NUMBER - STYLE NOUMBER FABRIC TYPE – BLENDED FABRIC PRODUCT TYPE – WOMENS WEAR DESIGN OF