Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 25 trang
THÔNG TIN TÀI LIỆU
Cấu trúc
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Nội dung
! "#$ %"!%# "$ &'!%() ! *% • • + • )# • +& • +&" • % • ,%&% !%) • ,%!%) • & +,- • • • • • -- + • ! • ! • • /- + "#$%#&' ()**)+ *, • ! / • .0 • 0. 121*1324()*15367613 "#$%#&' Warp kning oers: • 0weaving. • .!08 • 9..8 • . -0..:;0</8 • 7!0.08 • ;8 ()**)+7*)1 [...]... Sliding latch: In warp knitting m/c compound needles are used A sliding latch is used here to close the hook while knitting 6 Sliding latch bar: In warp knitting m/c the sliding latches remain unison The latch bar keeps the latches together and helps it to move unison while knitting 7 Cloth roller: The produced fabric is wound on the cloth roller TRICOT KNITTING Function of different parts of M/C: 8 Let-off... Comb: In this warp knitting m/c the comb is used to separate the warp yarns coming from the warp beam It works as the reeds of the weaving m/c and also controls the fabric width TRICOT KNITTING Function of different parts of M/C: 15 Warp beam: In tricot warp knitting m/c warp beam is used to supply the warp yarns parallely There are 8 -warp beam in this m/c 4 beam are on the upper side and 4 are to.. .WARP KNITTED FABRIC WARP KNITTING TECHNOLOGY • Warp knitting machines needles are mounted collectively and rigidly in a horizontal metal bar (the needle bar that runs the full knitting width of the machine) • Equally the yarn guides are also set rigidly into a horizontal metal bar (the guide bar that runs the full width of the machine) TRICOT KNITTING Function of different... process of releasing the warp yarns according to the requirement of the m/c and speed of cloth roller is the main function of let-off mechanism 9 Take up mechanism: It helps the produced fabric to wound on the cloth roller in proper tension There are 3 take-up r/r in this m/c It also gives proper tension to the warp sheet and controls the speed of warp beam 11 Link: In the warp knitting m/c the link is... the yarn around the needle and controls the rate of warp feed from the warp beam by making lapping movement TRICOT KNITTING Function of different parts of M/C: 4 Sinker and Sinker bar: In the tricot warp knitting m/c tricot sinker is used to hold down the loops produced by the needles The sinker bar keeps the sinkers together to move unison while knitting The main function of the sinker is to hold... TRICOT KNITTING Function of different parts of M/C: 12 Pattern chain: The pattern chain is the chain of links joined with each other The pattern chain helps the m/c to produce design 13 Pattern drum: It is a drum, which gives motion to the pattern chain There are groove on it and the pattern chain is placed on it It gets motion from the m/c driving motor through gearing 14 Comb: In this warp knitting. .. machine) TRICOT KNITTING Function of different parts of M/C: 1 Compound needle: In Tricot warp knitting m/c compound needle is used To form loop and produce the fabric is the main function of the needle 2 Needle bar: A needle bar is used in this m/c The main function of it is to hold the needles together and helps the needles to move unison while loop forming 3 Guide bar: Guide bar is used in this m/c to... TRICOT KNITTING Function of different parts of M/C: 17 Lubrication: The m/c has automatic lubrication system 18 Controlling unit: The controlling unit is used to control the m/c easily It has a digital control unit 19 Toothed belt: In this m/c the toothed belts are used to transfer motion without any slippage Knitting Element Displacements The diagram summarizes the somewhat confusing displacements made. .. the guide bar The front of the machine lies to the right of the diagram Knitting Element Displacements The diagram shows the individual yarn guides set in a solid bar The front-to-back movements are called swings The first swing from front to back is followed by a lateral shog: the overlap, which wraps the yarn in the needle hook Knitting Element Displacements The next movement is a swing from back to... adjacent needles back to the front of the machine At this time the needle bar moves upwards to place the overlap below the open beard on the shank of the needle TRICOT KNITTING Diagram (1.5 e) shows the presser bar moving forward to close all the needles and in (1.5 f) the closed needle passes down through the old loop and the sinkers move backwards to release the old loops so that knock-over can . + ,- • • • • • - - . - 0..:;0</8 • 7!0.08 • ;8 ()**)+7*)1 ()*154*7 ()**)+17)292+= • >;;0! ? - >. /8 • 1<? - ./8 + Function. • 0. 121*1324()*15367613 "#$%#&' Warp kning oers: • 0weaving. • .!08 • 9..8 • .