Đường ống đóng một vai trò quan trọng trong ngành công nghiệp dầu khí nói riêng và các ngành công nghiệp hoá chất nói chung. Việc thiết kế và quản lý đường ống luôn là mối quan tâm hàng đầu của các kỹ sư trong ngành. Với modul Pipeworks trong PDMS, chúng ta có thể dễ dàng thiết và quản lý các dữ liệu trong ngành. Tài liệu này dành cho các kỹ sư, chuyên gia, nhà thiết kế và những ai có niềm đam mệ thật sự.
Pipework Design User Guide Disclaimer Information of a technical nature, and particulars of the product and its use, is given by AVEVA Solutions Ltd and its subsidiaries without warranty. AVEVA Solutions Ltd and its subsidiaries disclaim any and all warranties and conditions, expressed or implied, to the fullest extent permitted by law. Neither the author nor AVEVA Solutions Ltd, or any of its subsidiaries, shall be liable to any person or entity for any actions, claims, loss or damage arising from the use or possession of any information, particulars, or errors in this publication, or any incorrect use of the product, whatsoever. Copyright Copyright and all other intellectual property rights in this manual and the associated software, and every part of it (including source code, object code, any data contained in it, the manual and any other documentation supplied with it) belongs to AVEVA Solutions Ltd or its subsidiaries. All other rights are reserved to AVEVA Solutions Ltd and its subsidiaries. The information contained in this document is commercially sensitive, and shall not be copied, reproduced, stored in a retrieval system, or transmitted without the prior written permission of AVEVA Solutions Ltd Where such permission is granted, it expressly requires that this Disclaimer and Copyright notice is prominently displayed at the beginning of every copy that is made. The manual and associated documentation may not be adapted, reproduced, or copied, in any material or electronic form, without the prior written permission of AVEVA Solutions Ltd. The user may also not reverse engineer, decompile, copy, or adapt the associated software. Neither the whole, nor part of the product described in this publication may be incorporated into any third-party software, product, machine, or system without the prior written permission of AVEVA Solutions Ltd, save as permitted by law. Any such unauthorised action is strictly prohibited, and may give rise to civil liabilities and criminal prosecution. The AVEVA products described in this guide are to be installed and operated strictly in accordance with the terms and conditions of the respective licence agreements, and in accordance with the relevant User Documentation. Unauthorised or unlicensed use of the product is strictly prohibited. First published September 2007 © AVEVA Solutions Ltd, and its subsidiaries 2007 AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom Trademarks AVEVA and Tribon are registered trademarks of AVEVA Solutions Ltd or its subsidiaries. Unauthorised use of the AVEVA or Tribon trademarks is strictly forbidden. AVEVA product names are trademarks or registered trademarks of AVEVA Solutions Ltd or its subsidiaries, registered in the UK, Europe and other countries (worldwide). The copyright, trade mark rights, or other intellectual property rights in any other product, its name or logo belongs to its respective owner. AVEVA Solutions Ltd Pipework Design User Guide Contents Page 12.0 © 2007 AVEVA Solutions Ltd i Pipework Design User Guide Pipework Design Read this First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1:1 Scope of this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 Assumptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 About the Tutorial Exercises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 Further Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 How the Guide is Organised . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 Further Training in Using PDMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:3 Introducing AVEVA PDMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1 Introducing the Structure of PDMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1 Strengths of PDMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1 PDMS Piping Network Design Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:2 Setting Up the PDMS Database Hierarchy . . . . . . . . . . . . . . . . . . . .3:1 How PDMS Stores Design Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:1 PDMS Design Data Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:2 Logging In. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:3 PDMS Startup Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:3 Creating some Administrative Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:4 Creating Some Equipment Items. . . . . . . . . . . . . . . . . . . . . . . . . . . .4:1 How Equipment Items are Represented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1 12.0 © 2007 AVEVA Solutions Ltd ii Pipework Design User Guide Basic Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1 Using Predefined Templates for Standard Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:2 Creating a Storage Tank to a Standard Design. . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Adding a Nozzle to the Storage Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:8 Viewing the Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:9 Defining what Appears in the View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:9 Manipulating the Displayed View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:11 Creating Some More Equipment Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:13 Creating a Vertical Vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:13 Naming the Nozzle in the Base of the New Vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:14 Creating a Standard Design Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:15 Changing the Orientation of an Equipment Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:16 Tidying Up Afterwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:18 Routing a Sequence of Piping Components . . . . . . . . . . . . . . . . . .5:1 Design-to-Catalogue Cross-Referencing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1 How Piping Networks are Represented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1 Pipes and Branches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:2 Piping Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:2 Starting the Pipework Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:3 Setting a Default Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:3 Creating a Simple Pipework Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:4 Modifying Pipe Sequences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10 Creating a Second Pipework Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:32 Quick Pipe Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:39 QPR Facilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:39 Cases of Ill-defined Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:40 Entering and Leaving QPR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:40 The Pipe Routing Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:41 The Extend Route Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:41 Nudging the Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:43 Cardinal Direction Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:44 Free Rotation Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:44 Direction and Rotation Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:45 Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:52 Popup Menus on the QPR Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:55 Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:59 Deleting Pipe Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:65 12.0 © 2007 AVEVA Solutions Ltd Pipework Design User Guide iii Pipework Modification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6:1 Pipework Component Bore and Specification Modification . . . . . . . . . . . . . . . 6:1 Modify Components Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:2 Component Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:3 Modifying Component Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:5 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:6 Choosing a Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:6 Multiple Component Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:8 Modifying Component Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:8 Modifying Insulation and Tracing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:11 Pipe Splitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:12 Multiple Mode Splitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:14 Splitting Pipes with a Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:16 Single Mode Splitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:22 Component Picking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:23 Feature Picking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:25 Checking and Outputting Design Data . . . . . . . . . . . . . . . . . . . . . . . 7:1 Checking for Design Data Inconsistencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:1 Design Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:2 Checking for Clashes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:4 Obstruction Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:4 Extent of Clashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:4 Clash Detection Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:5 Generating a Data Output Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:6 Generating Isometric Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7:7 Automatic Pipe Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8:1 Automatic Pipe Routing using PDMS Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:1 Basic Routing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:9 Positioning and Locking Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:19 Creating and Using Routing Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:27 Using Routing Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:32 Creating and Using Routing Planes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:36 Creating and Using Pipe Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:44 Pipe Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:55 Importing a P&ID File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:57 Automatic Pipe Routing Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:59 12.0 © 2007 AVEVA Solutions Ltd iv Pipework Design User Guide Routing Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:59 Creating and Editing Routing Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:75 Placing Pipes on Racks and Planes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:81 Importing Data from P&ID Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:86 Command Syntax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:92 Special Router Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8:99 Pipework Spooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9:1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:1 Database Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:1 3D Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:1 Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:2 Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:2 Spooling Volume Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:2 Drawing Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:2 Setting Up the Database Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:2 Database Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:3 Logging In to Start a SPOOLER Session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:3 Creating Some Administrative Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:4 Controlling the 3D View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:5 Setting up a 3D View Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:6 Manipulating the Displayed View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:8 Saving and Restoring a View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:9 Preparing the Site for Spooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:10 Checking the Design Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:10 Inspecting the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:11 Measuring the Pipe Lengths. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:12 Inserting Welds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:13 Splitting a Tube with a Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:15 Spooling the Piping Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:16 Pipework Spooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:16 Creating Spool Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:16 Numbering the Spool Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:18 Selecting Adjacent Field Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:18 Advanced SPOOLER Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:19 Checking the Spool Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:19 Selecting the Numbering Update Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:20 Changing the Shop/Field Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:22 Forcing a Spool Break at a Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:23 12.0 © 2007 AVEVA Solutions Ltd Pipework Design User Guide v Outputting Spool Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:24 Plotting the Spool Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:24 Isometric Drawing Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:26 Drawing Annotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9:27 Pipe Piece and Pipe Spool Production Checks . . . . . . . . . . . . . . .10:1 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:1 Pipe Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:1 Pipe Spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:1 Pipe Production Checks Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:2 Generating Spools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:5 Options on the Pipe Production Checks Form . . . . . . . . . . . . . . . . . . . . . . . . . 10:8 Setting Up Production Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:10 Define Auto-Resolve Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:11 Define Auto-Naming Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:11 Define Stock Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:12 Running a Production Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:13 Renaming Spools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:22 Individual renaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:22 Group renaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:23 Automatic Flange Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10:23 Pipe Sketches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11:1 Creating Pipe Sketches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:1 How to Use the Pipe Sketches Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:3 Created Sketches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:6 Pipe Sketch Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:9 Drawing Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:9 Backing Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:10 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:11 Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:14 Common Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:14 Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:16 How to Define Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:16 Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:17 Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:18 Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11:19 Piping Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12:1 12.0 © 2007 AVEVA Solutions Ltd vi Pipework Design User Guide Creating Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:1 Assembly Hierarchy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:5 Building and Maintaining Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:7 Creating the Hierarchy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:8 Building an Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:9 Non-Graphical Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:12 Primary and Secondary Origins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:13 Piping Assembly Component Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:14 STYPE Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:15 Position Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:17 Orientation Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:17 Bore Selection Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:18 Key Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12:19 Conclusion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13:1 The Equipment and Piping DESIGN Database. . . . . . . . . . . . . . . . .A:1 SPOOLER Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . .B:1 Spool Breaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B:1 Connection Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B:1 Weld and Joint Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B:2 Types of Welds and Joints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B:2 Special Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B:3 Shop Flag Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B:3 Leave Tubes of Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B:3 Welds for OLETs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B:4 Pipe Piece and Pipe Spool Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:1 Pipe Piece Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:1 PML Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:1 Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:1 Pipe Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:1 Pipe-Piece Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:1 Pipe-Piece Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:2 Pipe-Piece Pseudo Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:3 Pipe Spool Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:4 PML Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:4 Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:4 12.0 © 2007 AVEVA Solutions Ltd Pipework Design User Guide vii Pipe Spool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:4 Pipe Spool Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:4 Pipe Spool Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:5 Pipe Spool Methods (not implemented) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:5 Pipe Spool Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:6 Pipe Spool Pseudo Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:6 Pipe Spool Reporting Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C:6 MTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:6 Assembly Activities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:6 Bending Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:9 Welding Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:10 Spool Extents/End Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C:10 Fabrication Machine Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D:1 Fabrication Machine Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D:1 Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:1 BendingMachineResult . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:4 WeldingMachineResult. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:5 BendingTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:6 BendActivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:6 WeldingTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:6 Database Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D:7 FMWL - Fabrication Machine World Top Level Element . . . . . . . . . . . . . . . . . . . . . . . . . . . D:7 FMGRP - Fabrication Machine Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:7 FMBEND - Fabrication Machine - Bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:7 FMBPLN - Fabrication Machine - Bending - Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:8 FMBDIM - Fabrication Machine - Bending - Dimension. . . . . . . . . . . . . . . . . . . . . . . . . . . . D:8 FMBSST - Fabrication Machine - Bending - Springback/Stretch Factor . . . . . . . . . . . . . . . D:8 FMWELD - Fabrication Machine - Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:9 FMWSK - Fabrication Machine Welding - SKEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:9 Automatic Flange Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D:9 New Attribute for PTCA, PTAX, PTMI, PTPOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:9 New Pseudo Attributes for Branch Members. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:9 Connection Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:10 New Datacon Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D:10 Other Relevant Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E:1 PDMS Introductory Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E:1 AVEVA PDMS Reference Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E:1 12.0 © 2007 AVEVA Solutions Ltd viii Pipework Design User Guide General Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E:2 Sample Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F:1 [...]... Solutions Ltd 1:4 12.0 Pipework Design User Guide Introducing AVEVA PDMS 2 Introducing AVEVA PDMS This chapter introduces: • the strengths of PDMS • 2.1 the structure of PDMS • PDMS piping network design features Introducing the Structure of PDMS PDMS comprises the following functional parts: • modules • applications A module is a subdivision of PDMS that you use to carry out specific types of operation This... (for storage and/or for printing) © 2007 AVEVA Solutions Ltd 2:2 12.0 Pipework Design User Guide Setting Up the PDMS Database Hierarchy 3 Setting Up the PDMS Database Hierarchy In this chapter, you will learn: • about the PDMS database hierarchy • how PDMS stores design data • how to login to PDMS and begin the first tutorial exercise • how to create some administrative elements Although this guide is... in PDMS as well as learning how to connect sequences of piping components between them In this chapter you will look at the ways in which equipment data and piping design data is stored by PDMS, and you will create some administrative data elements to enable you to organise your detailed design in a logical way 3.1 How PDMS Stores Design Data All PDMS data is stored in the form of a hierarchy A PDMS. .. examples of the types of isometric plot, including material take-off lists, which can be produced easily by using PDMS Further Training in Using PDMS This guide teaches you to about the key features of using PDMS for piping designs only If you wish to learn more about the wide-ranging facilities of PDMS, AVEVA provides a wide range of training courses, covering all levels of expertise and all design disciplines... entered all the necessary details, the form looks as shown: Click OK 3.3 PDMS Startup Display When PDMS has loaded, your screen looks as shown: © 2007 AVEVA Solutions Ltd 3:3 12.0 Pipework Design User Guide Setting Up the PDMS Database Hierarchy As labelled above, the display comprises the following: • Title Bar - shows the current PDMS module, and its sub-application if applicable • Main Menu Bar - the... you will gain practical experience of the ways in which you can use PDMS while learning about the powerful facilities it provides 1.1.1 Intended Audience This guide has been written for engineers familiar with piping design practices, who may or may not have prior knowledge of PDMS 1.1.2 Assumptions For you to use this guide, the sample PDMS project, Project SAM, must be correctly installed on your system,... Pipework Design User Guide Read this First Read this First introduces this guide and summarises its scope Introducing AVEVA PDMS gives a general overview of the main design facilities provided within the pipework application Setting Up the PDMS Database Hierarchy explains how PDMS stores its design data and shows you how to organise your data Also describes the logging in procedure and how to create... to a particular discipline The applications you will use for piping design work in this guide are: • Equipment • Pipework You can switch quickly and easily between different parts of PDMS 2.2 Strengths of PDMS In AVEVA PDMS, you have a powerful suite of facilities, designed by piping engineers for piping engineers, for creating, analysing, and documenting logically interconnected piping networks The... Guide This guide introduces some of the facilities provided by the AVEVA Plant Design Management System (PDMS) for designing and documenting interconnected piping networks for a wide range of process and related Plant Design industries, both on-shore and off-shore It explains the main concepts underlying PDMS and its supporting applications, and shows how you can apply these to your own design projects... stage without fear of invalidating any of your prior work, because data consistency-checking is an integral © 2007 AVEVA Solutions Ltd 2:1 12.0 Pipework Design User Guide Introducing AVEVA PDMS part of the product PDMS automatically manages drawing production, material take-off reports, and so on, by reading all design data directly from a common set of databases, to prevent errors from being introduced . Introducing AVEVA PDMS This chapter introduces: • the structure of PDMS • the strengths of PDMS • PDMS piping network design features. 2.1 Introducing the Structure of PDMS PDMS comprises the. Up the PDMS Database Hierarchy 12.0 3:1 © 2007 AVEVA Solutions Ltd 3 Setting Up the PDMS Database Hierarchy In this chapter, you will learn: • about the PDMS database hierarchy • how PDMS stores. Training in Using PDMS This guide teaches you to about the key features of using PDMS for piping designs only. If you wish to learn more about the wide-ranging facilities of PDMS, AVEVA provides