Tiểu luận môn mạng máy tính Seminar Network Computer RIP Protocol Không gửi lại thông tin routing theo hướng mà router đó nhận được Cơ chế này sử dụng ngay cả khi không có hiện tượng một mạng bị down. Và cơ chế này giúp cho việc tránh được routing loop khi một mạng bị down Hạn chế : không khắc phục được hiện tượng count to infinity khi có nhiều router kết nối một cách gián tiếp. Ví dụ trong trường hợp 3 router kết nối theo hình tam giác
!"#$% #&'()*# +, +# - +./0 (+& / #1 /1#/-/,2,3%/(4 ///1/*&3*4 ,- ,- ,#-#-/ #-11,1 #-/ 5//,/ 67/.8 #,/-,//&9:/,/ ,- # # ;/-/ ,//&/,//1 /#/,/ # - # <7 # <7304 /-&=== #&-/,-& ◦ # ◦ &1#,,/- ◦ &1#,,/,/ #1#/// ◦ 1& ◦ <7///1-,, ◦ #/,#,, /,// [...]... IP address 255.255.255.255 Multicast route updates by using the IP address 224.0.0.9 Advantage and Disadvantage Advantage Simple to implement Compatible with several network machines Process load is small Use in small network ( Autonomous System ) Disadvantage Slow convergence Limitted hops Base on only Hop count parameter Summary Distance Vector and RIP Routing problem Slow convergence... through an interface, advertise it as unreachable back through same interface Hold down timer The hold down feature works by having each router start a timer when they first receive information about a network that is unreachable RIP’s hold down timer :180s Hold down timer (2) Hold down timer(3) Hold down Timer (4) Hold down timer(5) Hold down timer (6) Triggered Update When a route fails, an update... Updates TTL field in IP header Setting a maximum Once the router counts to infinity it marks router as unreachable by setting a maximum Split Horizon Only solves A router should not advertise a network through small routing loop and only which the the interface from update came prevents routing loop between neighbor Solution??? routers Split Horizon with Poison Reverse A variation of Route