BS 5486 11 1989 low voltage switchgear and controlgear assemblies BS 5486 11 1989 low voltage switchgear and controlgear assemblies BS 5486 11 1989 low voltage switchgear and controlgear assemblies BS 5486 11 1989 low voltage switchgear and controlgear assemblies BS 5486 11 1989 low voltage switchgear and controlgear assemblies BS 5486 11 1989 low voltage switchgear and controlgear assemblies
[...]... enclosures of switchgear and controlgear for voltages up to and including 1 000 V a.c and 1 200 V d.c BS 5486, Low- voltage switchgear and controlgear assemblies BS 5486- 1, Specification for type-tested and partially type-tested assemblies (general requirements) BS 5486- 13, Specification for particular requirements of consumer units BS 5559, Specification for identification of apparatus terminals and general... Copy, © BSI BS 5486- 11: 1989 NOTE Where appropriate, single phase testing supply is acceptable Figure 101 — Diagram of connections for TP and N fuseboard having outgoing ways rated up to and including 32 A © BSI 01-1999 7 Licensed copy:RMJM, 07/09/2005, Uncontrolled Copy, © BSI BS 5486- 11: 1989 NOTE Where appropriate, single phase testing supply is acceptable Figure 102 — Diagram of connections for TP and. .. products and services Contact the Information Centre Tel: 020 8996 7111 Fax: 020 8996 7048 Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: 020 8996 7002 Fax: 020 8996 7001 Copyright Copyright subsists in all BSI publications BSI also... include the following: a) type tests (see 8.1.1 and 8.2); b) routine tests (see 8.1.2 and 8.3) 8.1.1 Type tests (see 8.2) Type tests are intended to verify compliance with the requirements laid down in this standard for a given type of ASSEMBLY 5 Licensed copy:RMJM, 07/09/2005, Uncontrolled Copy, © BSI BS 5486- 11: 1989 Type tests shall be carried out on a sample of an ASSEMBLY or on parts of ASSEMBLIES. .. response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services... floor-mounted ASSEMBLIES also the degree of protection of the bottom to be indicated 7.4.2a Choice of protective measure against direct contact 7.4.3a Choice of protective measure against indirect contact © BSI 01-1999 11 Licensed copy:RMJM, 07/09/2005, Uncontrolled Copy, © BSI 12 blank BS 5486- 11: 1989 Publications referred to Licensed copy:RMJM, 07/09/2005, Uncontrolled Copy, © BSI BS 5420, Specification... Diagram of connections for TP and TP and N fuseboard having outgoing ways rated in excess of 32 A 8 © BSI 01-1999 BS 5486- 11: 1989 NOTE Where appropriate, single phase testing supply is acceptable Licensed copy:RMJM, 07/09/2005, Uncontrolled Copy, © BSI Figure 103 — Diagram of connections for DP fuseboard For tests on fuseboards containing neutrals and rated up to and including 32 A, the equipment shall... British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: 020 8996 9000 Fax: 020 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Buying standards Orders for all BSI, international and foreign standards... for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be... would cause the flow of a current, shall be disconnected at its terminals Anti-interference capacitors installed between live and exposed conductive parts shall not be disconnected and shall be capable of withstanding the test voltage For the test, either: a) all switching devices shall be closed; or b) the test voltage shall be applied successively to all parts of the circuit The test voltage shall be . 1200 V d.c. BS 5486, Low-voltage switchgear and controlgear assemblies. BS 5486-1, Specification for type-tested and partially type-tested assemblies (general requirements). BS 5486-13, Specification. BSI BS5 486-11:1989 © BSI 01-1999 Publications referred to BS 5420, Specification for degrees of protection of enclosures of switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200. BRITISH STANDARD BS 5486-11: 1989 Low-voltage switchgear and controlgear assemblies — Part 11: Specification for particular requirements