Modelling with AutoCAD 2002 modelling with AutoCAD.qxd 17/06/2002 15:37 Page i Other titles from Bob McFarlane Beginning AutoCAD ISBN 0 340 58571 4 Progressing with AutoCAD ISBN 0 340 60173 6 Introducing 3D AutoCAD ISBN 0 340 61456 0 Solid Modelling with AutoCAD ISBN 0 340 63204 6 Assignments in AutoCAD ISBN 0 340 69181 6 Starting with AutoCAD LT ISBN 0 340 62543 0 Advancing with AutoCAD LT ISBN 0 340 64579 2 3D Draughting using AutoCAD ISBN 0 340 67782 1 Beginning AutoCAD R13 for Windows ISBN 0 340 64572 5 Advancing with AutoCAD R13 for Windows ISBN 0 340 69187 5 Modelling with AutoCAD R13 for Windows ISBN 0 340 69251 0 Using AutoLISP with AutoCAD ISBN 0 340 72016 6 Beginning AutoCAD R14 for Windows NT and Windows 95 ISBN 0 340 72017 4 Advancing with AutoCAD R14 for Windows NT and Windows 95 ISBN 0 340 74053 1 Modelling with AutoCAD R14 for Windows NT and Windows 95 ISBN 0 340 73161 3 An Introduction to AEC 5.1 with AutoCAD R14 ISBN 0 340 74185 6 modelling with AutoCAD.qxd 17/06/2002 15:37 Page ii Modelling with AutoCAD 2002 Bob McFarlane MSc, BSc, ARCST CEng, FIED, RCADDes MIMechE, MIEE, MIMgt, MBCS, MCSD Curriculum Manager CAD and New Media, Motherwell College, Autodesk Educational Developer OXFORD AMSTERDAM BOSTON LONDON NEW YORK PARIS SAN DIEGO SAN FRANCISCO SINGAPORE SYDNEY TOKYO modelling with AutoCAD.qxd 17/06/2002 15:37 Page iii Butterworth-Heinemann An imprint of Elsevier Science Linacre House, Jordan Hill, Oxford OX2 8DP 225 Wildwood Avenue, Woburn, MA 01801-2041 First published 2002 Copyright © 2002, R. McFarlane. All rights reserved The right of Bob McFarlane to be identified as the author of this work has been asserted in accordance with the Copyright, Designs and Patents Act 1988. No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1T 4LP. Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to the publisher British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Cataloguing in Publication Data A catalogue record for this book is available from the Library of Congress ISBN 0 7506 5611 5 Produced and typeset by Gray Publishing, Tunbridge Wells, Kent Printed and bound in Great Britain by Bath Press, Avon For information on all Butterworth-Heinemann publications visit our website at www.bh.com modelling with AutoCAD.qxd 17/06/2002 15:37 Page iv Contents Preface vii Chapter 1 The 3D standard sheet 1 Chapter 2 Extruded 3D models 5 Chapter 3 The UCS and 3D coordinates 14 Chapter 4 Creating a 3D wire-frame model 24 Chapter 5 The UCS 32 Chapter 6 The modify commands with 3D models 44 Chapter 7 Dimensioning in 3D 47 Chapter 8 Hatching in 3D 52 Chapter 9 Tiled viewports 56 Chapter 10 3D views (Viewpoint) 64 Chapter 11 Model space and paper space and untiled viewports 83 Chapter 12 New 3D multiple viewport standard sheet 91 Chapter 13 Surface modelling 100 Chapter 14 3DFACE and PFACE 110 Chapter 15 3DMESH 110 Chapter 16 Ruled surface 113 Chapter 17 Tabulated surface 121 Chapter 18 Revolved surface 123 Chapter 19 Edge surface 127 Chapter 20 3D polyline 133 Chapter 21 3D objects 136 Chapter 22 3D geometry commands 139 Chapter 23 Blocks and Wblocks in 3D 151 Chapter 24 Dynamic viewing 161 modelling with AutoCAD.qxd 17/06/2002 15:37 Page v Chapter 25 Viewport specific layers 169 Chapter 26 Shading and 3D orbit 173 Chapter 27 Introduction to solid modelling 179 Chapter 28 The basic solid primitives 184 Chapter 29 The swept solid primitives 196 Chapter 30 Boolean operations and composite solids 205 Chapter 31 Composite model 1 – a machine support 209 Chapter 32 Composite model 2 – a backing plate 214 Chapter 33 Composite model 3 – a flange and pipe 219 Chapter 34 The edge primitives 222 Chapter 35 Solids editing 228 Chapter 36 Regions 235 Chapter 37 Inquiring into solids 241 Chapter 38 Slicing and sectioning solid models 247 Chapter 39 Profiles and true shapes 255 Chapter 40 Dimensioning in model and paper space 262 Chapter 41 A detailed drawing 267 Chapter 42 Blocks, wblocks and external references 273 Chapter 43 The setup commands 286 Chapter 44 The final composite 295 Chapter 45 Rendering 302 Chapter 46 Publishing to the web 312 Chapter 47 Students’ models 316 Activities 323 Index 335 vi Modelling with AutoCAD 2002 modelling with AutoCAD.qxd 17/06/2002 15:37 Page vi Preface This book is intended for the AutoCAD 2002 user who wants to learn about modelling. My aim is to demonstrate how the user can create 3D wire-frame models, surface models and solid models with practical exercises backed up by user activities. The concept of how multiple viewports can be used to enhance drawing productivity will also be discussed in detail. The user will also be introduced to rendering. The book will provide an invaluable aid to a wide variety of users, ranging from the capable to the competent. The book will assist students on any national course which requires 3D draughting and solid modelling, e.g. City and Guilds, BTEC and SQA as well as students at higher institutions. Users in industry will find the book useful as a reference and an ‘inspiration’. The book will also prove useful to the Design/Technology departments in schools who are now becoming more involved in computer aided design. Reader requirements The following are the requirements I consider important for using the book: a) the ability to draw with AutoCAD 2002 b) the ability to use icons and toolbars c) an understanding of how to use dialogue boxes d) the ability to open and save drawings to a named folder e) a knowledge of model/paper space would be an advantage, although this is not essential Using the book The book is essentially a self-teaching package with the reader working interactively through exercises using information supplied. The various prompts and responses will be listed in order and icons and dialogue boxes will be included where appropriate. The following points are important: a) All drawing work should be saved to a named folder. The folder name is at your discretion but I will refer to it as MODR2002, e.g. open drawing MODR2002\MODEL1 or similar b) Icons will be displayed the first time is used c) Menu bar selection will be in bold type, e.g. Draw-Surfaces-3D Face d) Keyboard entry will also be in bold type, e.g. VPOINT, UCS etc e) Prompts will be in typewrite type, e.g. First corner f) The symbol <R> will require the user to press the return/enter key. Note All the exercises and activities have been completed using AutoCAD 2002. I have tried to correct any errors in the drawings and text, but if any error should occur, I apologise for them and hope they do not spoil your learning experience. Modelling is an intriguing topic and should give you satisfaction and enjoyment. Any comments you have about how to improve the material in the book would be greatly appreciated. modelling with AutoCAD.qxd 17/06/2002 15:37 Page vii To CIARA, our beautiful grand-daughter modelling with AutoCAD.qxd 17/06/2002 15:37 Page viii 5 Limits Menu bar with Format-Drawing Limits and: prompt Specify lower left corner and enter: 0,0 <R> prompt Specify upper right corner and enter: 420,297 <R> 6 Drafting Settings Menu bar with Tools-Drafting Settings and use the tabs to set: a) Snap: 5 and grid: 10 – not generally used in 3D b) Polar Tracking: off c) Object Snap: off and all modes: clear Object Snap Tracking: off 7 Dimension style Menu bar with Dimension-Style and: prompt Dimension Style Manager dialogue box respond pick New prompt Create New Dimension Style dialogue box respond 1. New Style Name: 3DSTD 2. Start With: ISO-25 (or similar) 3. Use for: All dimensions 4. pick Continue prompt New Dimension Style: 3DSTD dialogue box respond pick Lines and Arrows tab and alter: 1. Dimension Lines a) Baseline spacing: 10 2. Extension Lines a) Extend beyond dim lines: 2.5 b) Offset from origin: 2.5 3. Arrowheads a) both Closed Filled b) Leader: Closed Filled c) Arrow size: 4 d) Center Mark for Circles: None then pick Text tab and alter: 1. Text Appearance a) Text Style: ST1 b) Text Height: 5 2. Text Placement a) Vertical: Above b) Horizontal: Centred c) Offset from dim line: 1.5 3. Text Alignment a) ISO Standard then pick Fit tab and alter: 1. Fit Options a) Either the text or the arrows active (black dot) 2. Text Placement a) Beside the dimension line active 3. Scale for Dimension Features a) Use overall scale of: 1 4. Fine tuning: both inactive, i.e. blank 2 Modelling with AutoCAD 2002 modelling with AutoCAD.qxd 17/06/2002 15:37 Page 2 then pick Primary Units tab and alter: 1. Linear Dimensions a) Unit Format: Decimal b) Precision: 0.00 c) Decimal separator: ‘.’ Period d) Round off: 0 2. Measurement Scale a) Scale factor: 1 3. Zero Suppression a) Trailing: active, i.e. tick 4. Angular Dimensions a) Units Format: Decimal Degrees b) Precision: 0.0 c) Zero Suppression: Trailing active then pick Alternate Units tab and: 1. Display alternate units: not active then pick Tolerances tab and: 1. Tolerance Format 1 Method: None then pick OK from New Dimension Style dialogue box prompt Dimension Style Manager dialogue box with 1. 3DSTD added to styles list 2. preview of 3DSTD style displayed 3. description of 3DSTD given respond 1. pick 3DSTD and it becomes highlighted 2. pick Set Current 3. AutoCAD alert perhaps – just pick OK 4. pick Close 8 Make layer 0 current and menu bar with Draw-Rectangle and: prompt Specify first corner point and enter: 0,0 <R> prompt Specify other corner point and enter: 420,290 <R> 9 This rectangle will save as a ‘reference base’ for our models 10 Menu bar with View-Zoom-All and pan to suit 11 Make layer MODEL current 12 Set variables to your own requirements, e.g. GRIPS, PICKFIRST, etc. While I generally work with these off, there will be occasions when they will be toggled on 13 Menu bar with File-Save As and: prompt Save Drawing As dialogue box respond 1. scroll and pick named folder (MODR2002) 2. enter File name: 3DSTDA3 3. file type: AutoCAD 2000 Drawing (*.dwg) 4. pick Save The 3D standard sheet 3 modelling with AutoCAD.qxd 17/06/2002 15:37 Page 3 [...]... 2 modelling with AutoCAD. qxd 17 /06/2002 15 :37 Page 10 10 Modelling with AutoCAD 2002 Step 1: the base 1 With ELEV at the command line, set the new default elevation to 0 and the new default thickness to 30 2 With the polyline icon from the Draw toolbar, draw a 0 width polyline: Start point 50,50 Next point @10 0,0 Next point @0 ,10 0 Next point @ 10 0,0 Next point C 3 Menu bar with. .. layers – L1, L2, L3 with continuous linetype and colour numbers 30, 72, 240 respectively modelling with AutoCAD. qxd 17 /06/2002 15 :37 Page 21 The UCS and 3D coordinates 21 Figure 3.7 Coordinate entry exercise A) WCS entry 1 With layer L1 current, use the LINE icon and draw: First point 0,0,0 Next point 15 0 ,10 0,80 absolute Next point @50,80,90 relative absolute Next point @10 0 . 74053 1 Modelling with AutoCAD R14 for Windows NT and Windows 95 ISBN 0 340 7 316 1 3 An Introduction to AEC 5 .1 with AutoCAD R14 ISBN 0 340 7 418 5 6 modelling with AutoCAD. qxd 17 /06/2002 15 :37. 83 Chapter 12 New 3D multiple viewport standard sheet 91 Chapter 13 Surface modelling 10 0 Chapter 14 3DFACE and PFACE 11 0 Chapter 15 3DMESH 11 0 Chapter 16 Ruled surface 11 3 Chapter 17 Tabulated. Modelling with AutoCAD 2002 modelling with AutoCAD. qxd 17 /06/2002 15 :37 Page i Other titles from Bob McFarlane Beginning AutoCAD ISBN 0 340 585 71 4 Progressing with AutoCAD ISBN 0 340 6 017 3