Process Engineering Equipment Handbook 2009 Part 19 pot

Some Commonly Used Specifications, Codes, Standards, and Texts Texts No handbook is all encompassing, and the process engineer’s field is a vast one. The following texts may help process engineers, depending on their industry sector and duties, especially if used in conjunction with this one. Agriculture 1. Hsu, D. S., Ultrahigh Temperature Processing and Aseptic Packaging of Dairy Products; Dairy and Food Technology Handbook, Damana Tech, 1970. 2. North American Food Processing and Trade Dictionary, expanded NAFTA edition, Allied Publishers International, 1997. 3. Handbook of the Food Processing, Distribution and Retailing Sectors, Rizvi SMH, Marketing and Economics Branch, Agriculture Canada. 4. North American Food Processing Dictionary, Allied Publishing International, 1996. Biotechnology (see Environment) Chemical Engineering; Chemicals 1. Handbook of Chemical Engineering Calculations, McGraw-Hill, New York, 1984. 2. Wells, G. M., Handbook of Petrochemicals and Processes, Gower, New York, 1999. 3. Perry, R. H., ed., Perry’s Chemical Engineering Handbook, 7th ed., McGraw-Hill, New York, 1997. Civil Engineering 1. Scott, J. S., Dictionary of Civil Engineering, 3d ed., Halstead Press, 1981. 2. Standard Handbook for Civil Engineers, 4th ed., McGraw-Hill, 1995. 3. ASCE Manuals and Reports on Engineering Practice, ASCE, 1962. Cleaning (see Agriculture; Chemical Engineering; appropriate field ) Control Systems; Instrumentation 1. Process/Industrial Instrumentation and Controls Handbook, 4th ed., McGraw-Hill, New York, 1993. 2. Lenk, J. D., Handbook of Controls and Instrumentation, Prentice Hall, Upper Saddle River, N.J., 1980. 3. Handbook of Instrumentation and Controls: A Practical Design and Applications Manual for the Mechanical Services Covering Steam Plants, Power Plants, Heating Systems, Air Conditioning Systems, Ventilation Systems, Diesel Plants, Refrigeration and Water Treatment, McGraw-Hill, New York, 1996. Conversion of Units (see Metric System Conversions) Environment 1. Soares, C. M., Environmental Technology and Economics: Sustainable Development in Industry, Butterworth-Heinemann, 1999. 2. Saylor and Sanseverino, eds., Biotechnology in the Sustainable Environment, Plenum Press, New York, 1997. Sp-1 3. Ronneau and Bitchaeva, eds., Biotechnology for Waste Management and Site Restoration: Technology, Education, Business and Political Aspects, Kluwer Academic, 1997. 4. Sikdar and Irvine, Bioremediation: Principles and Practice, Techromic Publishing Co., 1998. 5. Eweis, Bioremediation Principles, McGraw-Hill, New York. 6. Standard Handbook of Hazardous Waste Treatment and Disposal, 2d ed., McGraw-Hill, New York, 1998. 7. Hazardous Waste Materials Compliance Handbook, 2d ed., Van Nostrand Reinhold, New York, 1997. 8. Handbook of Solid Waste Management, McGraw-Hill, New York, 1996. Food Processing (see Agriculture) Health (see Safety) Instrumentation; Measurement (see Control Systems) Machinery (see Rotating Machinery) Machining and Tooling (see Metallurgy) Manufacturers 1. Thomas Register of American Manufacturers, Thomas Publishing Company, New York. Medical (see Pharmaceuticals) Metallurgy; Metals; Machining; Tooling, Mining 1. American Society of Tool and Manufacturing Engineering, Handbook of Fixture Design, ASTM, Philadelphia, Pa., 1962. 2. Thesaurus of Mineral Processing and Extractive Metallurgy Terms, 2d ed., Energy Mines and Resources Canada, 1985. 3. International Dictionary of Materials, Mineralogy, Geology, Mining and Oil Industries, Technoprint International, Milano, 1968. 4. Concise Metals Engineering Data Book, ASM International, 1997. 5. Walsh, R. A., Machining and Metalworking Handbook, 2d ed., McGraw-Hill, New York, 1998. 6. Brown, J., Advanced Machining Technology Handbook, McGraw-Hill, New York, 1998. 7. Madison, J., CNC Machining Handbook: Basic Theory, Production Data and Machining Procedures, 1st ed., Industrial Press, 1996. 8. Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann, 1998. 9. Welders Handbook: A Complete Guide, HP Books, 1997. 10. Welding Handbook, American Welding Society, 1968. Metals (see Metallurgy) Metric System Conversions 1. McGraw-Hill Metrication Manual, McGraw-Hill, New York, 1972. Mining (see Metallurgy) Pharmaceuticals 1. CPS: Compendium of Pharmaceuticals and Specialties, Canadian Pharmaceutical Association, 1967. 2. Chemical Stability of Pharmaceuticals: A Handbook for Pharmaceuticals, John Wiley, New York, 1979. Plastics 1. Handbook of Plastic Materials and Technology, John Wiley, New York, 1990. 2. Plastics Handbook, McGraw-Hill, New York, 1994. Process Plant Machinery (see Rotating Machinery) Pulp and Paper 1. Britt, K. W., ed., Handbook of Pulp and Paper Technology, Van Nostrand Reinhold, New York, 1970. 2. Process Engineering Design Criteria Handbook, Technical Association of Pulp and Paper Industries, TAPPI Press, 1996. Sp-2 Some Commonly Used Specifications, Codes, Standards, and Texts Rotating Machinery Bloch, H., and Soares, C. M., Process Plant Machinery, 2d ed., Butterworth-Heinemann, 1998. Safety 1. Handbook of Environmental Health and Safety Principles and Practices, National Environmental Health Association, 1991. 2. Woodside, G., Environmental Health and Safety Portable Handbook, McGraw-Hill, New York, 1998. Waste Management (see Environment) Welding (see Metallurgy) A List of American Petroleum Institute (API) Specifications and Publications From the Library of Congress Index, 138 titles (subjects include, for instance, petroleum engineering—specifications; and rotating machinery, such as compressors, pumps, and so forth). A List of Available ASME Codes, Standards, and Specifications Consult ASME (800-THE ASME) at the time of purchase for any changes to list prices and/or additional specifications available. Key to Updating Service Symbols and Reaffirmation (R) Designation Codes and standards with updating service are indicated by the following symbols: A = Addenda: Additions and revisions that are sent automatically to purchasers of code or standard. I = Interpretations: Written replies to inquiries concerning interpretation of technical aspects of code or standard. Sent automatically to purchasers of code or standard. C = Cases: Codes and standards committees meet regularly to consider proposed additions and revisions to code or standard and to formulate Cases to clarify the intent of existing requirements or provide, when the need is urgent, rules for materials or constructions not covered by existing rules. Sent automatically to purchasers of code or standard. S = Supplement: Same as “A,” Addenda. Year (e.g., A I 2000): Next publication date of code or standard. Updating service includes Addenda, Cases, Interpretations, or Supplements up to this date. Reaffirmation (e.g., R1997): Committee has determined that no changes are warranted in code or standard. L = List: List of certificate holders. Some Commonly Used Specifications, Codes, Standards, and Texts Sp-3 Sp-4 Some Commonly Used Specifications, Codes, Standards, and Texts AUTHORIZED INSPECTION QAI-1-1995 Qualifications for Authorized Inspection A I L 1999 Order No. J09595 $38.00 B29.8M-1993 Leaf Chains, Clevises and Sheaves Order No. M00393 $29.00 B29.10M-1997 Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth Order No. M07897 $33.00 B29.11M-1994 Combination Chains, Attachments, and Sprocket Teeth Order No. K08194 $29.00 B29.12M-1997 Steel Bushed Rollerless Chains, Attachments, and Sprocket Teeth Order No. K03097 $32.00 B29.14M-1996 “H” Type Mill Chains, Attachments, and Sprocket Teeth Order No. M06296 $29.00 B29.15M-1997 Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth Order No. M07997 $34.00 B29.16M-1995 Welded Steel Type Mill Chains, Attachments, and Sprocket Teeth Order No. K07995 $29.00 B29.17M-1983(R1995) Hinge Type Flat Top Conveyor Chains and Sprocket Teeth Order No. K00078 $29.00 B29.18M-1994 Welded Steel-Type Drag Chains, Attachments, and Sprocket Teeth Order No. K08093 $29.00 B29.19M-1996 Agricultural Roller Chains, Attachments, and Sprockets Order No. K08596 $29.00 B29.21M-1996 700 Class Welded Steel and Cast Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants Order No. K10596 $29.00 B29.22M-1995 Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs Order No. K10495 $27.00 B29.23M-1985(R1995) Flexible Chain Couplings Order No. K00114 $29.00 B29.24M-1995 Roller Load Chains for Overhead Hoists Order No. K12695 $29.00 B29.25M-1994 Open Barrel Steel Pintle Type Conveyor Chains, Attachments, and Sprockets Order No. K12494 $28.00 B29.26M-1996 Fatigue Testing Power Transmission Roller Chain Order No. M16096 $32.00 AUTOMOTIVE LIFTING DEVICES Safety standard for portable automotive lifting devices, covering requirements for safety, health, design, production, construction, maintenance, performance or operation of equipment, or qualification of personnel. PALD-1997 Safety Standard for Portable Automotive Lifting Devices A I 2002 Order No. J13597 $89.00 BOILERS Boiler and Pressure Vessel Code CHAINS Standards for the dimensions of transmission and conveyor chains. B29.1M-1993 Precision Power Transmission Roller Chains, Attachments and Sprockets Order No. K12793 $35.00 B29.2M-1982(R1994) Inverted Tooth (Silent) Chains and Sprockets Order No. K00111 $29.00 B29.3M-1994 Double-Pitch Power Transmission Roller Chains, and Sprockets Order No. K07594 $30.00 B29.4M-1994 Double-Pitch Conveyor Roller Chains, Attachments and Sprockets Order No. M07294 $32.00 B29.6M-1993 Steel Detachable Link Chains, Attachments, and Sprockets Order No. M06693 $39.00 Some Commonly Used Specifications, Codes, Standards, and Texts Sp-5 COMPRESSORS Safety standards for the construction, installation, operation, and maintenance of air and gas compression equipment. B19.1-1995 Safety Standard for Air Compressor Systems A I 2000 Order No. J09795 $48.00 B19.3-1991 Safety Standard for Compressors for Process Industries A I 1996 Order No. JX7091 $37.00 B30.10-1993 Hooks A I 1998 Order No. J04893 $45.00 B30.11-1998 Monorails and Underhung Cranes A I 2003 Order No. J12098 $52.00 B30.12-1992 Handling Loads Suspended From Rotorcraft A I 1997 Order No. J04792 $47.00 B30.13-1996 Storage/Retrieval (S/R) Machines and Associated Equipment A I 2001 Order No. J05296 $48.00 B30.14-1996 Side Room Tractors A I 2001 Order No. J05996 $42.00 B30.16-1993 Overhead Hoists (Underhung) A I 1998 Order No. J11693 $52.00 B30.17-1992 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) A I 1997 Order No. JX6092 $40.00 B30.18-1993 Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist) A I 1998 Order No. J11393 $45.00 B30.19-1993 Cableways A I 1998 Order No. J10893 $47.00 CONTROLS Safety requirements for the assembly, maintenance, and operation of controls and safety devices installed on automatically operated boilers directly fired with gas, oil, gas/oil, or electricity. CSD-1-1998 Controls and Safety Devices for Automatically Fired Boilers A I 2001 Order No. A09198 $52.00 Form CSD-1 Manufacturer’s/ Installing Contractor’s Report for ASME CSD-1 Order No. A091F1 $18.00 CONVEYORS Safety standard for the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to accident hazards. B20.1-1996 Safety Standard for Conveyors and Related Equipment A I 1999 Order No. J08897 $58.00 CRANES AND HOISTS Safety standards for the construction, installation, operation, inspection, and maintenance of jacks, cranes, monorails, derricks, hoists, hooks, slings, and cableways; and specification standards for hoists. B30.1-1998 Jacks A I 2003 Order No. J06998 $57.00 B30.2-1996 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) A I 2001 Order No. J08996 $52.00 B30.3-1996 Construction Tower Cranes A I 2001 Order No. J03396 $52.00 B30.4-1996 Portal, Tower, and Pedestal Cranes A I 2001 Order No. J00196 $45.00 B30.5-1994 Mobile and Locomotive Cranes A I 1999 Order No. J08394 $58.00 B30.6-1995 Derricks A I 2000 Order No. J09395 $45.00 B30.7-1994 Base Mounted Drum Hoists A I 1994 Order No. JX9094 $54.00 B30.8-1993 Floating Cranes and Floating Derricks AI 1998 Order No. J12493 $52.00 B30.9-1996 Slings A I 2001 Order No. J09296 $75.00 CRANES AND HOISTS cont’d Sp-6 Some Commonly Used Specifications, Codes, Standards, and Texts B30.20-1993 Below-the-Hook Lifting Devices A I 1998 Order No. J10093 $53.00 B30.21-1994 Manually Lever Operated Hoists A I 1999 Order No. J12694 $49.00 B30.22-1993 Articulating Boom Cranes A I 1998 Order No. J11793 $53.00 B30.25-1998 Scrap and Material Handlers A I 2003 Order No. J14698 $50.00 HST-1M-1989(R1995) Performance Standard for Electric Chain Hoists Order No. J07889 $29.00 HST-2M-1989(R1995) Performance Standard for Hand Chain Manually Operated Chain Hoists Order No. J08789 $29.00 HST-3M-1991(R1996) Performance Standard for Manually Lever Operated Chain Hoists Order No. J09891 $29.00 HST-4M-1991(R1996) Performance Standard for Overhead Electric Wire Rope Hoists Order No. J09991 $29.00 HST-5M-1991(R1996) Performance Standard for Air Chain Hoists Order No. J10291 $29.00 HST-6M-1986(R1995) Performance Standard for Air Wire Rope Hoists Order No. J00106 $29.00 DIMENSIONS Standards for limits and fits, preferred sizes, and pipe dimensions. B4.1-1967(R1994) Preferred Limits and Fits for Cylindrical Parts Order No. L00022 $30.00 B4.2-1978(R1994) Preferred Metric Limits and Fits Order No. L00054 $32.00 B4.3-1978(R1994) General Tolerances for Metric Dimensioned Products Order No. L00055 $30.00 B4.4M-1981(R1994) Inspection of Workpieces Order No. L00062 $30.00 B32.1-1952(R1994) Preferred Thickness for Uncoated, Thin, Flat Metals (Under 0.250/in.) Order No. L00025 $29.00 B32.2-1969(R1994) Preferred Diameters for Round Wire—0.500 Inches and Under Order No. M00012 $29.00 B32.3M-1984(R1994) Preferred Metric Sizes for Flat Metal Products Order No. L00045 $29.00 B32.4M-1980(R1994) Preferred Metric Sizes for Round, Square, Rectangle and Hexagon Metal Products Order No. L00046 $29.00 B32.5-1977(R1994) Preferred Metric Sizes for Tubular Metal Products other than Pipe Order No. L00051 $29.00 B32.6M-1984(R1994) Preferred Metric Equivalents of Inch Sizes for Tubular Metal Products other than Pipe Order No. L00052 $29.00 B36.10M-1996 Welded and Seamless Wrought Steel Pipe Order No. M03196 $35.00 B36.19M-1985(R1994) Stainless Steel Pipe Order No. M00013 $29.00 DRAWINGS AND TERMINOLOGY Standards for drafting, abbreviations, letter symbols, graphs, and charts. Abbreviations Y1.1-1989 Abbreviations—for Use on Drawings and in Text Order No. J00389 $49.00 Drafting Standards Y14.1-1995 Decimal Inch Drawing Sheet Size and Format Order No. N00195 $32.00 Y14.1M-1995 Metric Drawing Sheet Size and Format Order No. N12995 $32.00 Y14.2M-1992(R1998) Line Conventions and Lettering Order No. N00292 $32.00 Y14.3M-1994 Multi and Sectional View Drawings Order No. N00394 $40.00 Y14.4M-1989(R1994) Pictorial Drawing Order No. N00489 $29.00 Y14.5M-1994 Dimensioning and Tolerancing Order No. N00594 $93.00 Y14.5.1M-1994 Mathematical Definition of Dimensioning and Tolerancing Order No. N13294 $49.00 Y14.5M-1994 PLUS Y14.5.1M-1994 Special Offer Order No. YX1494 $120.00 Y14.5.2-1995 Certification of Geometric Dimensioning and Tolerancing Professionals Order No. N13495 $32.00 Y14.6-1978(R1993) Screw Thread Representation Order No. N00006 $29.00 Some Commonly Used Specifications, Codes, Standards, and Texts Sp-7 DRAWINGS AND TERMINOLOGY cont’d Y14.6M-1981(R1998) Screw Thread Representation (Metric Supplement) Order No. N00097 $29.00 Y14.7.1-1971(R1998) Gear Drawing Standards—Part 1: For Spur, Helical, Double Helical and Rack Order No. K00067 $29.00 Y14.7.2-1978(R1994) Gear and Spline Drawing Standards—Part 2: Bevel and Hypoid Gears Order No. N00081 $29.00 Y14.8M-1996 Castings and Forgings Order No. N12096 $46.00 Y14.13M-1981(R1998) Mechanical Spring Representation Order No. N00098 $29.00 Y14.18M-1986(R1998) Optical Parts Order No. N00115 $29.00 Y14.24M-1989(R1996) Types and Applications of Engineering Drawings Order No. N00122 $62.00 Y14.32.1M-1994 Chassis Frames Passenger Car and Light Truck— Ground Vehicle Practices Order No. N13394 $32.00 Y14.34M-1996 Associated Lists Order No. N10296 $35.00 Y14.35M-1997 Revision of Engineering Drawings and Associated Documents Order No. N13097 $35.00 Y14.36M-1996 Surface Texture Symbols Order No. N08096 $44.00 Y14.100M-1998 Engineering Drawing Practices Order No. N13898 $45.00 Y14 Technical Report 4- 1989 A Structural Language Format for Basic Shape Description Order No. N11989 $94.00 Graphic Symbols Standards Y32.2.3-1949(R1994) Redesignation of Z32.2.3-1949(R1953) Graphic Symbols for Pipe Fittings, Valves and Piping Order No. K00006 $30.00 Y32.2.4-1949(R1998) Graphic Symbols for Heating, Ventilating, and Air Conditioning Order No. K00005 $29.00 Y32.2.6-1950(R1998) Graphic Symbols for Heat-Power Apparatus Order No. K00004 $29.00 Y32.4-1997(R1994) Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture and Building Construction Order No. K00007 $29.00 Y32.7-1972(R1994) Graphic Symbols for Railroad Maps and Profiles Order No. K00008 $29.00 Y32.10-1967(R1994) Graphic Symbols for Fluid Power Diagrams Order No. N00022 $29.00 Y32.11-1961(R1998) Graphic Symbols for Process Flow Diagrams in Petroleum and Chemical Industries Order No. K00040 $29.00 Y32.18-1972(R1998) Symbols for Mechanical and Acoustical Elements as Used in Schematic Diagrams Order No. K00011 $29.00 ELEVATORS AND ESCALATORS Safety codes and standards for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair of elevators, dumbwaiters, escalators, moving walks, material lifts and dumbwaiters with automatic transfer devices, wheelchair lifts, and inclined-stairway chair lifts. A17 CD-ROM for Elevators and Escalators Order No. A00144 $495.00 A17.1-1996 Safety Code for Elevators and Escalators A I 1999 Order No. A09696 $125.00 A17.1-1993 Safety Code for Elevators and Escalators A I 1996 Order No. A09693 $114.00 A17.1-1990 Safety Code for Elevators and Escalators Order No. AX9690 $103.00 Handbook on A17.1 Safety Code for Elevators and Escalators-1996 Edition Order No. A11296 $105.00 A17.1 special Offer- A17.1-1996 Plus A17.1 Handbook (1996 Edition) Order No. AX1796 $205.00 A17.2.1-1996 Inspector’s Manual for Electric Elevators A I 2000 Order No. A13496 $52.00 A17.2.2-1997 Inspector’s Manual for Hydraulic Elevators A I 2000 Order No. A13997 $54.00 A17.2.3-1994 Inspector’s Manual for Escalators and Moving Walks A I 1997 Order No. A14194 $42.00 A17.3-1996 Safety Code for Existing Elevators and Escalators A I 2001 Order No. A12396 $55.00 A17.3-1990 Safety Code for Existing Elevators and Escalators Order No. A12390 $47.00 A17.4-1991 Guide for Emergency Evacuation of Passengers from Elevators Order No. A12591 $25.00 A17.5-1996 Elevator and Escalator Electrical Equipment A I 2000 Order No. A13296 $69.00 ELEVATORS AND ESCALATORS cont’d Sp-8 Some Commonly Used Specifications, Codes, Standards, and Texts Interpretations: A17 Documents 1972–1979 Order No. A00108 $25.00 A17 Interpretations Nos. 2–13 1989 Order No. A96187 $39.00 QEI-1-1997 Standard for the Qualification of Elevator Inspectors A I L 2000 Order No. A12097 $49.00 Checklist for Inspection and Test of Elevators Used for Construction* Order No. A49C10 $41.00 Checklist for Inspection of Electric Elevators* Order No. A134C1 $39.00 Checklist for Inspection of Hydraulic Elevators* Order No. A050C7 $28.00 Checklist for Inspection of Escalators and Moving Walks* Order No. A141C1 $29.00 * In pad form (100 per pad) FASTENERS Standards for bolts, nuts, rivets, washers, keys, eyebolts, pins, and retaining rings. FAP-1-1995 Quality Assurance Program Requirements for Fastener Manufacturers and Distributors and Testing Laboratories A I L 1999 Order No. M13995 $46.00 Metric Fasteners B18.1.3M-1983 (R1995) Metric Small Solid Rivets Order No. M00131 $29.00 B18.2.3.1M-1979 (R1995) Metric Hex Cap Screws Order No. M00100 $29.00 B18.2.3.2M-1979 (R1995) Metric Formed Hex Screws Order No. M00101 $29.00 B18.2.3.3M-1979 (R1995) Metric Heavy Hex Screws Order No. M00102 $29.00 B18.2.3.4M-1984 (R1995) Metric Hex Flange Screws Order No. M00103 $29.00 B18.2.3.5M-1979 (R1995) Metric Hex Bolts Order No. M00104 $29.00 B18.2.3.6M-1979 (R1995) Metric Heavy Hex Bolts Order No. M00105 $29.00 B18.2.3.7M-1979 (R1995) Metric Heavy Hex Structural Bolts Order No. M00106 $29.00 B18.2.3.8M-1981 (R1991) Metric Hex Lag Screws Order No. M00107 $29.00 B18.2.3.9M-1984 (R1995) Metric Heavy Hex Flange Screws Order No. M00133 $29.00 B18.2.3.10M-1996 Square Head Bolts (Metric Series) Order No. M15896 $28.00 B18.2.4.1M-1979 (R1995) Metric Hex Nuts, Style 1 Order No. M00114 $29.00 B18.2.4.2M-1979 (R1995) Metric Hex Nuts, Style 2 Order No. M00117 $29.00 B18.2.4.3M-1979 (R1995) Metric Slotted Hex Nuts Order No. M00119 $29.00 B18.2.4.4M-1982 (R1993) Metric Hex Flange Nuts Order No. M00122 $29.00 B18.2.4.5M-1979 (R1998) Metric Hex Jam Nuts Order No. M00115 $29.00 B18.2.4.6M-1979 (R1998) Metric Heavy Hex Nuts Order No. M00116 $29.00 B18.3.1M-1986 (R1993) Socket Head Cap Screws Order No. M00094 $29.00 B18.3.2M-1979 (R1998) Metric Series Hexagon Keys and Bits Order No. M00108 $29.00 B18.3.3M-1986 (R1993) Hexagon Socket Head Shoulder Screws Order No. M00109 $29.00 B18.3.4M-1986 (R1993) Hexagon Socket Button Head Cap Screws Order No. M00110 $29.00 B18.3.5M-1986 (R1993) Hexagon Socket Flat Countersunk Head Cap Screws Order No. M00130 $29.00 B18.3.6M-1986 (R1993) Metric Series Socket Set Screws Order No. M00111 $29.00 B18.5.2.1M-1996 Metric Round Head Short Square Neck Bolts Order No. L06496 $32.00 B18.5.2.2M-1982 (R1993) Metric Round Head Square Neck Bolts Order No. M00124 $29.00 B18.5.2.3M-1990 (R1998) Round Head Square Neck Bolts with Large Head Order No. M00141 $29.00 B18.6.5M-1986 (R1993) Metric Thread Forming and Thread Cutting Tapping Screws Order No. N00110 $30.00 B18.6.7M-1985 (R1993) Metric Machine Screws Order No. M00136 $29.00 Some Commonly Used Specifications, Codes, Standards, and Texts Sp-9 FASTENERS cont’d B18.7.1M-1984 (R1992) Metric General Purpose Semi- Tubular Rivets Order No. N00106 $29.00 B18.8.3M-1995 Spring Pins— Coiled Type Order No. M14295 $34.00 B18.8.4M-1994 Spring Pins— Slotted Order No. M14794 $32.00 B18.8.5M-1994 Machine Dowel Pins—Hardened Ground Order No. M14894 $32.00 B18.8.6M-1995 Cotter Pins (Metric Series) Order No. M14695 $32.00 B18.8.7M-1994 Headless Clevis Pins Order No. M14994 $32.00 B18.8.8M-1994 Headed Clevis Pins Order No. M15094 $32.00 B18.8.9M-1998 Grooved Pins (Metric Series) Order No. M16598 $34.00 B18.12-1962(R1991) Glossary of Terms for Mechanical Fasteners Order No. M00046 $29.00 B18.13.1M-1991 Screw and Washer Assemblies—Sems A I 1996 Order No. N00124 $42.00 B18.16.1M-1979 (R1995) Mechanical and Performance Requirements for Prevailing Torque- Type Steel Metric Hex Nuts and Hex Flange Nuts Order No. M00118 $29.00 B18.16.2M-1979 (R1995) Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Order No. M00113 $29.00 B18.16.3M-1982 (R1993) Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Order No. M00123 $29.00 B18.18.1M-1987 (R1993) Inspection and Quality Assurance for General Purpose Fasteners Order No. M00125 $29.00 B18.18.2M-1987 (R1993) Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners Order No. M00126 $29.00 Supplement to B18.18.2 Order No. M0126S $29.00 B18.18.3M-1987 (R1993) Inspection and Quality Assurance for Special Purpose Fasteners Order No. M00127 $29.00 B18.18.4M-1987 (R1993) Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications Order No. M00128 $29.00 B18.18.5M-1998 Inspection and Quality Assurance Plan Requiring In- Process Inspection and Control Order No. M16298 $32.00 B18.18.6M-1998 Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System Order No. M16398 $28.00 B18.18.7M-1998 Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan Order No. M16498 $29.00 B18.21.2M-1994 Lock Washers Order No. M14094 $32.00 B18.22M-1981(R1990) Metric Plain Washers Order No. L00063 $29.00 B18.24.1-1996 Part Identifying Number (PIN) Code System Standard for B18 Externally Threaded Products A I 2002 Order No. M15996 $55.00 B18.25.1M-1996 Square and Rectangular Keys and Keyways Order No. M15696 $32.00 B18.25.2M-1996 Woodruff Keys and Keyways Order No. M15796 $32.00 B27.7-1977(R1993) General Purpose Tapered and Reduced Cross Section Retaining Rings (Metric) Order No. L00053 $29.00 B27.8M-1978(R1993) General Purpose Metric Tapered and Reduced Cross Section Retaining Rings-Type 3DM1- Heavy Duty External Rings, Type 3EM1- Reinforced E≤ Rings, Type 3FM1- 8C Type Rings Order No. L00060 $29.00 Fasteners in Customary Units B18.1.1-1972(R1995) Small Solid Rivets Order No. M00006 $29.00 B18.1.2-1972(R1995) Large Rivets Order No. K00023 $29.00 B18.2.1-996 Square and Hex Bolts and Screws (Inch Series) A I 1999 Order No. M04496 $47.00 B18.2.2-1987(R1993) Square and Hex Nuts (Inch Series) Order No. M00043 $29.00 B18.2.6-1996 Fasteners for Use in Structural Applications A I 1999 Order No. M16196 $34.00 [...]... PTC 19. 3 -197 4 (R1986) Temperature Measurement Order No C00035 $38.00 PTC 19. 5 -197 2 Application, Part II of Fluid Meters: Interim Supplement on Instruments and Apparatus Order No G00018 $23.00 PTC 19. 5.1 -196 4 Weighing Scales Order No D00028 $32.00 PTC 19. 7 -198 0 (R1988) Measurement of Shaft Power Order No D00009 $32.00 PTC 19. 8 -197 0 (R1985) Measurement of Indicated Power Order No D00008 $32.00 PTC 19. 10 -198 1... PTC 17 -197 3(R1997) Reciprocating InternalCombustion Engines Order No C00020 $32.00 PTC 18 -199 2 Hydraulic Prime Movers Order No C01892 $44.00 PTC 18.1 -197 8 (R1984) Pumping Mode of Pump/Turbines Order No C00044 $32.00 PTC 19. 1 -198 5 (R1990) Instruments and Apparatus: Part 1 Measurement Uncertainty I 199 1 Order No D04585 $55.00 PTC 19. 2 -198 7 Instruments and Apparatus: Part 2 Pressure Measurement A I 199 2... Power Order No D00008 $32.00 PTC 19. 10 -198 1 Part 10 Flue and Exhaust Gas Analyses Order No C00031 $43.00 PTC 19. 11 -199 7 Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle Order No D0 1197 $75.00 PTC 19. 14 -195 8 Linear Measurements Order No D00014 $32.00 PTC 19. 22 -198 6 Digital Systems Techniques I 199 1 Order No C05486 $50.00 PTC 19. 23 -198 0 (R1985) Part 23 Guidance Manual for Model Testing... Order No D00027 $32.00 PTC 28 -196 5(R1985) Determining the Properties of Fine Particulate Matter Order No D00030 $32.00 PTC 29 -196 5(R1985) Speed-Governing Systems for Hydraulic TurbineGenerator Units Order No C00040 $32.00 PTC 30 -199 1(R1998) Air Cooled Heat Exchangers A I 199 6 Order No CO0057 $95.00 PTC 31 -197 2(R1991) Ion Exchange Equipment Order No C00016 $32.00 PTC 32.1 -196 9 (R1992) Nuclear Steam Supply... A112 .19. 3M -198 7 (R1996) Stainless Steel Plumbing Fixtures (Designed for Residential Use) Order No J00050 $30.00 Sp-17 A112 .19. 4M -199 4 Porcelain Enameled Formed Steel Plumbing Fixtures Order No J06494 $33.00 A112 .19. 9M -199 1 (R1998) Non-Vitreous Ceramic Plumbing Fixtures Order No J13291 $29.00 A112 .19. 5 -197 9 (R1998) Trim for WaterCloset Bowls, Tanks and Urinals Order No J00058 $29.00 A112 .19. 10 -199 4... PTC 20.1 -197 7 (R1988) Speed and LoadGoverning Systems for Steam TurbineGenerator Units Order No C00 019 $32.00 Sp-15 PTC 20.2 -196 5 (R1986) Overspeed Trip Systems for Steam Turbine-Generator Units Order No C00041 $32.00 PTC 20.3 -197 0 (R1986) Pressure Control Systems Used on Steam Turbine Generator Units Order No C00027 $32.00 PTC 21 -199 1 Particulate Matter Collection Equipment I 199 6 Order No D0 2191 $45.00... $29.00 B94.18.1 -197 7(R1995) Punches—Basic Ball-Lock Light and Heavy Duty (Metric) Order No M00087 $29.00 B94 .19- 1997 Milling Cutters and End Mills Order No L00897 $44.00 B94.21 -196 8(R1995) Gear Shaper Cutters Order No J00007 $29.00 B94.31 -198 1(R1995) Steel Rotary Slitting Knives and Steel Spacing Collars Order No K00061 $29.00 B94.33 -199 6 Jig Bushings Order No K0 2196 $49.00 B94.23 -196 9(R1995) Punch Guide... $29.00 A112 .19. 6 -199 5 Hydraulic Requirements for Water Closets and Urinals Order No J13095 $32.00 A112 .19. 7M -199 5 Whirlpool Bathtub Appliances Order No J 1199 5 $28.00 A112 .19. 8M -198 7 (199 6) Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances Order No J00118 $29.00 A112.21.1M -199 1 (R1998) Floor Drains Order No J04090 $30.00 A112.21.2M -198 3 Roof Drains... $32.00 B1.11 -195 8(R1994) Microscope Objective Thread Order No N00020 $32.00 B1.12 -198 7(R1992) Class 5 Interference-Fit Thread Order No N00032 $40.00 B1.13M -199 5 Metric Screw Threads—M Profile Order No N04695 $37.00 B1.15 -199 5 Unified Inch Screw Threads (UNJ Thread Form) Order No N1 3195 $44.00 B1.16M -198 4(R1992) Gages and Gaging for Metric M Screw Threads Order No N00026 $44.00 B1.20.1 -198 3(R1992) Pipe... B46.1 -199 5 Surface Texture (Surface Roughness, Waviness and Lay) Order No M 0199 5 $69.00 TOOLS Standards for machine tools, consumable tools, and hand tools Machine Tools B5.1M -198 5(R1992) T-Slots, Their Bolts, Nuts and Tongues Order No M00024 $30.00 Sp -19 B5.5 -195 9(R1992) Rotating Air Cylinders and Adapters Order No L00031 $30.00 B5.25 -197 8(R1992) Punch and Die Sets Order No L00027 $30.00 B5.25M -198 0(R1992) . 18.1 -197 8 (R1984) Pumping Mode of Pump/Turbines Order No. C00044 $32.00 PTC 19. 1 -198 5 (R1990) Instruments and Apparatus: Part 1 Measurement Uncertainty I 199 1 Order No. D04585 $55.00 PTC 19. 2 -198 7 Instruments. No. J1 4196 $31.00 A112 .19. 1M -199 4 Enameled Cast Iron Plumbing Fixtures Order No. J0 1194 $33.00 A112 .19. 2M -199 5 Vitreous China Plumbing Fixtures Order No. J01295 $42.00 A112 .19. 3M -198 7 (R1996) Stainless. and Apparatus Order No. G00018 $23.00 PTC 19. 5.1 -196 4 Weighing Scales Order No. D00028 $32.00 PTC 19. 7 -198 0 (R1988) Measurement of Shaft Power Order No. D00009 $32.00 PTC 19. 8 -197 0 (R1985) Measurement of Indicated