DEFORM™ 3D Version 6.0 Keyword Documentation 5038 Reed Road Columbus, Ohio, 43220 Tel (614) 451-8330 Fax (614) 451-8325 Email support@deform.com ACVCOF 7 ANGMO2 9 ANGMOV 10 ANISO 11 AVGSTR 13 BCCANG 14 BCCCRB 16 BCCDEF 18 BCCDFN 20 BCCFNC 22 BCCRHT 24 BCCTFN 26 BCCTFN 26 BCCTMP 28 BLZMAN 30 CNTACT 31 CNTMTH 32 CNTRA2 33 CNTRAX 34 CNVCOF 35 CRBFLX 38 CREEP 39 CRPTIM 41 CSFREQ 42 CURSIM 43 CURSIM 43 CVGERR 44 DAMAGE 45 DATOM 47 DBREAD 48 DEFBWD 51 DEMAX 53 DENSTY 54 DIEGEO 55 DIFCOE 61 DPLEN 64 DRMESH 65 DRZ 66 DSMAX 67 DTMAX 69 DTPMAX Error! Bookmark not defined. DTSUB 73 DVMAX 74 DVOLF 76 ECAFLX 77 ECATFN 79 ECATFN 79 ECCATM 81 ECCATM 81 ECCDEF 83 ECCDEF 83 ECCTMP 85 ECCTMP 85 ECDEFN 87 ECDEFN 87 ECHFLX 89 ECHFLX 89 ECPRES 91 ECPRES 91 ECTMFN 93 ECTMFN 93 ELMCON 95 ELMCON 95 ELPSOL 97 ELRST 98 EMAX 100 EMSVTY 101 ENVATM 103 ENVTMP 105 EXECMD 107 EXPAND 108 EXPAND 108 FPERV 110 FRAE2H 111 FRCFAC 112 FRCMOD 114 FRCNEL 115 FRCWIN 116 FRZ 120 FRZ 120 FSTRES 121 GENCTC 138 GENCTC 138 GENDB 139 GEOERR 140 GRAIN 141 GRNDAT 143 HDNEST 148 HDNOBJ 150 HDNPHA 151 HDNRUL 153 HDNTIM 155 HEATCP 156 IHTCOF 159 INICTC 161 INTRST 162 ITRMTH 163 ITRMTH 163 ITRMXD 165 ITRMXT 166 JOMINY 167 KFREAD 169 KFWRIT 171 LATENT 172 LATENT 172 LOCDEF 173 LOCTMP 175 LOCTMP 175 LMAX 178 LMAX 178 LMTSTR 180 LOCATM 181 MATAXI 183 MATAXI 183 MATDEN 184 MATDEN 184 MDSOBJ 185 MDSOBJ 185 MESHNO 186 MGERR 187 MGGRID 188 MGNELM 189 MGSIZM 191 MGSIZR 192 MGTELM 193 MGUSER 195 MGWCUV 197 MGWSTN 198 MGWSTR 200 MGWTMP 202 MGWUSR 204 MOVCTL 205 MSTMTR 211 MTLGRP 212 MTNAME 214 NDFLUX 215 NDHEAT 217 NDTMP 219 NSTART 221 NSTEP 222 NWEAR 223 OBJNAM 224 OBJPOS 225 OBJTYP 226 ODMAX 228 OTPRNG 229 OTPRNG 229 PDIE 230 PENINF 232 PENVOL 234 PHASLH 236 PHASTF 238 PHASVL 239 PMEAB 241 PMITT 243 POISON 244 PRSNAM 249 PRSTRE 250 PRSTRE 250 PROBID 251 PROBID 251 PRZ 252 REFPOS 253 REFTMP 254 RGDCNT 255 RHTFLX 256 RHTFLX 256 RMDPTH 257 RMSTEP 257 RMSTRK 259 RMTIME 260 ROTSYM 261 RZ 262 SEPRES 263 SIMNAM 265 SLDERR 266 SMAX 268 SMODE 269 SOLMTD 270 SOLMTT 271 SPDLMT 272 STNCMP 273 STNOUT 274 STPDEF 275 STPINC 276 STRAIN 277 STRESS 278 STROKE 280 STYPE 281 SYMSUF 282 THRCND 283 TICF 286 TINTGF 288 TLOC 291 TMAX 292 TMPBWD 293 TMPLIQ 295 TMPLMT 296 TMPSOL 297 TNOW 298 TRANS 299 TRGVOL 301 TRNSFP 302 TTTD 303 UENAME 307 UNIT 308 UNNAME 309 UNTE2H 310 URZ 311 USRDEF 313 USRELM 315 USRNOD 317 USRSUB 319 UTSDAT 320 VMIN 322 VOLCRG 323 VOLFC 324 VOLFC 324 VOLFS 326 VOTAGE 328 WINATM 329 WINATM 329 WINTMP 331 WMODEL 334 WPAXIS (1) 335 WRTOBJ 337 WRTOBJ 337 YOUNG 338 YLDS 342 ZEFI 343 ZEFI 343 Temperature Reaction Rate 400 0.1 500 0.2 600 0.3 ACVCOF 1 3 400 0.1 500 0.2 600 0.3 REMARKS Applicable Simulation Modules: Microstructure Applicable Simulation Modes: Diffusion REMARKS Applicable object types: Plastic, Elasto-plastic RELATED TOPICS RELATED TOPICS Boundary constraints Keywords: URZ, FRZ for a particular object. If a user specifies the BCCCRB then it is not necessary to define the environment conditions in regards to atom content. It should be noted that the surface nodes should be only selected when using this keyword. An example of implementation of the process is shown below. If the surface nodes are specified with an atom content of 0.3 and D is the distance in an object then: Applicable Simulation Modules: Microstructure Applicable Simulation Modes: Diffusion Applicable Object Types: ALL except rigid [...]... Elastic, Plastic, Elastoplastic, Porous RELATED TOPICS Boundary constraints Keywords: BCCDEF, BCCDFN, BCCTMP, BCCTFN 2 not used 3 prescribed current in RHTFLX -n node is in contact with object n Applicable object types: Rigid, Elastic, Plastic, Elastoplastic, Porous RELATED TOPICS Boundary constraints, Inter-object contact Keywords: VOTAGE, RHTFLX ... node/boundary constraint code pairs have no boundary constraint associated with them Applicable object types: Elastic, Plastic, Elastoplastic, Porous RELATED TOPICS Boundary constraints, Inter-object contact Keywords: BCCDFN, BCCFNC, PRZ, FRZ, URZ, MOVCTL If no values are provided for DefFtypeX, DefFtypeY, and DefFtypeZ it is assumed that all nodes which have deformation boundary constraint codes specified... Contact constraints are only applied to slave objects For bcc = 6, a non-axis aligned symmetry plane is defined A simple plane is used to define this (with zero friction and non-seperable conditions) The keyword BCCDFN is used for storage of plane information The direction of the boundary constraint code (BCX or BCY) refers to X and Y in the local coordinate system defined by BCCANG or the global coordinate . EMAX 10 0 EMSVTY 10 1 ENVATM 10 3 ENVTMP 10 5 EXECMD 10 7 EXPAND 10 8 EXPAND 10 8 FPERV 11 0 FRAE2H 11 1 FRCFAC 11 2 FRCMOD 11 4 FRCNEL 11 5 FRCWIN 11 6 FRZ 12 0 FRZ 12 0 FSTRES 12 1 GENCTC 13 8. 13 8 GENDB 13 9 GEOERR 14 0 GRAIN 14 1 GRNDAT 14 3 HDNEST 14 8 HDNOBJ 15 0 HDNPHA 15 1 HDNRUL 15 3 HDNTIM 15 5 HEATCP 15 6 IHTCOF 15 9 INICTC 16 1 INTRST 16 2 ITRMTH 16 3 ITRMTH 16 3 ITRMXD 16 5. ITRMXT 16 6 JOMINY 16 7 KFREAD 16 9 KFWRIT 17 1 LATENT 17 2 LATENT 17 2 LOCDEF 17 3 LOCTMP 17 5 LOCTMP 17 5 LMAX 17 8 LMAX 17 8 LMTSTR 18 0 LOCATM 18 1 MATAXI 18 3 MATAXI 18 3 MATDEN 18 4 MATDEN 18 4