Drilling and Associated Technologies Part 7 pps

Burrows, L. and Hancox, D. Cra Engineering Data Book. Stanley ornes Pub., 1978. Precision Cutting Tools. Guhring Pub. 8 th Ed., 2002. Inuence of Metallurgy on Hole Making Operations. ASM Pub: Materials/Metalworking Technology Series, 1978. Kaczmarek, J. Principles of Machining by Cutting Abrasion and Erosion. Peter Pregrinus Pub. (Warsaw), 1976. Kalpakjian, S. Manufacturing Processes for Engineering Ma- terials. Addison-Wesley Longman, Inc., 1997. Leach, R. e Measurement of Surface Texture using Stylus Instruments – Measurement Good Practice Guide: No. 37. NPL Pub. 2001. Modern Metal Cutting – Part 8: Drilling eory. AB Sand- vik Coromant, 1980. Modern Metal Cutting – Part 9: Drilling Tools. AB Sandvik Coromant, 1981. Modern Metal Cutting – A Practical Handbook. AB Sandvik Coromant Pub., 1994. Shaw, M.C. Metal Cutting Principles. Clarendon Press, Ox- ford, 1984. Smith, G.T. Advanced Machining – e Handbook of Cut- ting Technology. IFS/Springer Verlag, 1989. Smith, G.T. Industrial Metrology – Surfaces and Roundness. Springer Verlag, 2002. Stainless Steel Turning, AB Sandvik Coromant Pub., 1996. Tlusty, G. Manufacturing Processes and Equipment. Pren- tice Hall, 2000. Drilling and Associated Technologies 147 . Sandvik Coromant Pub., 1996. Tlusty, G. Manufacturing Processes and Equipment. Pren- tice Hall, 2000. Drilling and Associated Technologies 1 47 . Sand- vik Coromant, 1980. Modern Metal Cutting – Part 9: Drilling Tools. AB Sandvik Coromant, 1981. Modern Metal Cutting – A Practical Handbook. AB Sandvik Coromant Pub., 1994. Shaw, M.C. Metal. Inc., 19 97. Leach, R. e Measurement of Surface Texture using Stylus Instruments – Measurement Good Practice Guide: No. 37. NPL Pub. 2001. Modern Metal Cutting – Part 8: Drilling eory. AB Sand- vik