Thông tin tài liệu
Đặc tính của HDB Nhóm III 6. Dầu gốc GTL “Gas to Liquid” • Nguyên tắc: – Chuyển hóa khí thiên nhiên thành H-C (tổng hợp Fisher-Tropsch) Natural gas, or methane, is converted into a mixture of hydrogen and carbon monoxide. This mixture is called synthesis gas, or syngas Syngas is converted into a mixture of liquids and wax The wax is converted into room-temperature liquids that can travel in an oil pipeline or oil tanker Dầu gốc “Gas to Liquid” • Chi phí sản xuất GTL: So sánh hiệu năng / giá của các HDB a – Độ bay hơi, VI, hàm lượng aromatique, khả năng làm việc ở nhiệt độ thấp, phân hủy sinh học 7. Dầu tổng hợp (Nhóm IV và V) 1.Hydrocacbon: • Polyisobutène (PIB) • Polyalphaoléfine (PAO)(PIO) • Alkylaromatique: alkylbenzène, alkylnaphtalène 2.Các hợp chất oxy: • Ester của diacide • Ester của polyol (TMP, PE) • Oligomère của alphaoléfine và ester • Polyalkylène glycol • Các hợp chất P, Si, F Dầu tổng hợp Polyisobutène • Nguyên liệu: • Phân đoạn C 4 : Ex: - isobutène 40 ÷ 50% - butène 20 ÷ 30% - butane 20 ÷ 30% • Polymérisation, Hydrogénation • Cấu trúc hóa học: Polybutène-1 Polybutène-2 Polyisobutène PIB -[CH 2 – CH] n- CH 2 CH 3 -[CH] n - CH 2 CH 2 CH 3 CH 3 CH 3 -[CH – CH] n - CH 3 CH 2 – C CH 3 n Dầu tổng hợp Polyalphaoléfine PAO • Polyme hóa các α-oléfine: α-olefin Catalyst Polymerisation Distillation Dimer Hydrogenation Filtration Finished PAO base Fluid CatalystH 2 R – CH – CH 2 – CH – H CH 3 R x R-CH=CH 2 • Tổng hợp: So sánh PAO và dầu khoáng Performance High T o 0 30 20 10 10 2 5 Mineral oil PAO Evaporation loss, wt% 6,5h @ 204 o C KV at 98.9 o C, cSt 40 Increased protection Mineral oil PAO ISO VG Viscosity Equivalent viscosity Temperature, o C 40 Increased protection Mineral oil PAO ISO VG Viscosity Equivalent viscosity Temperature, o C Performance Low T o 40 Superior flow ability Mineral oil PAO ISO VG Viscosity Equivalent viscosity Temperature, o C 40 Superior flow ability Mineral oil PAO ISO VG Viscosity Equivalent viscosity Temperature, o C -80 0 -40 -20 -60 50 2 25 25 Mineral oil PAO Pour point, o C KV at 100 o C, cSt So sánh PAO và dầu khoáng MVI- Medium Viscosity Index (Naphthenic Basestock; Aromatic content 1,9%) HVI- High Viscosity Index (Paraffinic Basestock; Aromatic content 2,69%) LVI- Low Viscosity Index (Naphthenic Basestock; Aromatic content 12,3%) 2cSt 4cSt 6cSt 8cSt 10cSt 40cSt 200cS t Đặc tính của vài loại dầu PAO [...]... n-oléfin interne C15 và C16 – Hydrogénation và distillation • Thành phần hóa học: Composition (%pds) Dimères (C30) PIO 4 PIO 6 PIO 8 94 67 42 Trimères (C45) 6 26 43 Tétramères (C60) et + - 7 15 Dầu tổng hợp Poly internal oléfine PIO • Tính chất: Unité MX 2104 MX 2106 MX 2108 Visco 40oC mm2/s 19. 8 30.2 57 Visco 100oC mm2/s 4.2 5.66 8.62 121 128 125 VI Pt Eclair o C 228 234 260 Pt Ecoulement o C -5 1 -4 8... PIO • Tính chất: Unité MX 2104 MX 2106 MX 2108 Visco 40oC mm2/s 19. 8 30.2 57 Visco 100oC mm2/s 4.2 5.66 8.62 121 128 125 VI Pt Eclair o C 228 234 260 Pt Ecoulement o C -5 1 -4 8 -4 5 %pds 13.8 9. 4 4.4 Noack Dầu tổng hợp Alkylaromatique • Alkylbenzène: Ví dụ: C12H25 C12H25 Tùy thuộc alkyl, có 2 loại: thẳng và nhánh . Ex: - isobutène 40 ÷ 50% - butène 20 ÷ 30% - butane 20 ÷ 30% • Polymérisation, Hydrogénation • Cấu trúc hóa học: Polybutène-1 Polybutène-2 Polyisobutène PIB -[ CH 2 – CH] n- CH 2 CH 3 -[ CH] n - . viscosity Temperature, o C -8 0 0 -4 0 -2 0 -6 0 50 2 25 25 Mineral oil PAO Pour point, o C KV at 100 o C, cSt So sánh PAO và dầu khoáng MVI- Medium Viscosity Index (Naphthenic Basestock; Aromatic content. (Naphthenic Basestock; Aromatic content 1 ,9% ) HVI- High Viscosity Index (Paraffinic Basestock; Aromatic content 2, 69% ) LVI- Low Viscosity Index (Naphthenic Basestock; Aromatic content 12,3%) 2cSt 4cSt 6cSt
Ngày đăng: 09/07/2014, 22:20
Xem thêm: Công nghệ bôi trơn - Giảm ma sát Cơ Khí part 9 docx