Professional Information Technology-Programming Book part 164 pps

Configure the Winsock Buffer Size (pcAnywhere) (All Windows) Popular Use this registry item to set the size in bytes of TCP's Winsock buffer. Using a large value may increase the throughput of connections where the delay is large in relation to the bandwidth. This includes Internet, ISDN, RAS, dial-up networking, WAN and satellite connections. Compatibility with the OnNet 2.1 TCP/IP Stack (pcAnywhere) (All Windows) This registry item resolves an issue where pcAnywhere displayed the wrong host IP address when using FTP's OnNet 2.1 TCP/IP stack. Prompt for TCP/IP Host (pcAnywhere) (All Windows) This registry item allows a TCP/IP remote to specify an IP address or name when you leave the "Host To Connect To" field blank. Adapter Binding Mode (pcAnywhere) (All Windows) This registry item allows a waiting host to bind to a new adapter, such as a dial-up adapter, without reinitializing the host. TCP/IP Host Binding Mode (pcAnywhere) (All Windows) This registry item allows you to specify whether the host will wait on the first TCP/IP address given by the operating system, or whether it will wait on the TCP/IP index as indicated by TCPIPHostAddressIndex. Specify Host Mode TCP/IP Address (pcAnywhere) (All Windows) This registry item allows you to specify which TCP/IP address index the host will wait on. Multicast Packet Delay (pcAnywhere) (All Windows) This sets the delay in milliseconds between each send. This is useful if multicast error correction is disabled. Configure the Multicast Data Port (pcAnywhere) (All Windows) This setting selects the port that the multicast data is sent to. Multicast Error Correction (pcAnywhere) (All Windows) This sets the level of error correction used on the host. The host specifies which level of error correction the remotes will use. Multicast Adapter Selection (pcAnywhere) (All Windows) Use this registry item for a multihomed, multicast host that is not binding to the correct network card. This can be why none of the remotes receive the multicast packets. Configure Multicast Send and Receive Buffers (pcAnywhere) (All Windows) These registry items set the number of receive and send buffers when using an error correction multicast session. For slow remotes, a larger value may lead to less data loss. Multicast Maximum Transmission Unit (pcAnywhere) (All Windows) This registry item sets the Maximum Transmission Unit (MTU) in bytes. The MTU is the maximum bytes that may be sent as one IP multicast packet. Multicast Winsock Receive Buffer (pcAnywhere) (All Windows) This registry item sets the size in bytes of the Winsock receive buffer. Ignore DSR on Serial Devices (pcAnywhere) (All Windows) Use this item for modems or other serial devices that do not initialize correctly because their DSR is not initially set. It is also useful if the modem connection does not have a DSR line. Change Serial 56K Connection Speed (pcAnywhere) (All Windows) Use this item when a serial connection can be made at 38,400 bps and 115,000 bps, but not at 57,600 bps. TAPI Modem Errors (pcAnywhere) (All Windows) Each time you add a TAPI modem, it generates a unique TAPI Permanent Line ID which is stored in pcANYWHERE32's connection items. If you no longer have a modem with this unique ID, pcANYWHERE32 displays an error message. This registry key tells pcANYWHERE32 how to handle this situation. Configure IPX Search Mode (pcAnywhere) (All Windows) This registry item enables the SAP method of network search instead of using the bindery when making IPX connections. Hide the Record Session Button (pcAnywhere) (All Windows) Use this registry key to hide the Record Session icon from the remote session toolbar. Remote Printer Inactivity Time-out (pcAnywhere) (All Windows) Use this setting if a print job is being separated into multiple jobs during remote printing. This item sets the inactivity time-out for the remote printing facility. Configure Legacy Remote Print Mode (pcAnywhere) (All Windows) This setting specifies the default print destination when connecting to a pcAnywhere 2.0 or 5.0 host. Show Full Screen Reminder Message (pcAnywhere) (All Windows) This setting turns the Full Screen Reminder Message on or off. Host Connection Time-Out (pcAnywhere) (All Windows) If pcAnywhere host does not respond, hang up. This is useful for scripts that call systems where a modem will answer, but the pcAnywhere host may not be running. Run Smart Setup (pcAnywhere) (All Windows) This setting controls whether SmartSetup is run when pcAnywhere is loaded for the first time. Run the pcAnywhere Service in Stealth Mode (pcAnywhere) (All Windows) Use this setting to hide the Host Waiting icon and Waiting dialog. Use Computer Name Instead of Caller Name (pcAnywhere) (All Windows) When this key is set, if a host has the "Prompt to confirm connection" option checked, the host computer's prompt dialog will display the remote's computer name instead of the caller's name when a connection is made. Wait for Call After Disconnect (pcAnywhere) (All Windows) If enabled, the host will not wait for a call when the remote disconnects. Configure Persistent Cache (pcAnywhere) (All Windows) This setting turns pcAnywhere's persistent cache feature on or off. Multi-Processor Options (pcAnywhere) (All Windows) This registry item specifies which processors pcANYWHERE32 8.0 will run on. Prompt If Logged Out (pcAnywhere) (All Windows) This registry key allows you to specify how pcANYWHERE32 will handle a remote connection when the pcANYWHERE32 host is waiting at the Windows NT login screen and the "Prompt On Connection" and "Disconnect On Timeout" options have been checked. Speed Send File Size Limits (pcAnywhere) (All Windows) The minimum size a file must be for SpeedSend to work is 10K. You can change this value. Confirm File Send (pcAnywhere) (All Windows) When this setting is disabled, the remote does not display the confirm prompt when sending a file. Confirm File Delete (pcAnywhere) (All Windows) When this setting is disabled, the remote does not display the confirm prompt when deleting a file. Home : Software : Windows CE Remove the Menu Sliding Animation (Pocket PC 2002) This tweak will remove the animated sliding menu effect found on the Pocket PC. Change Internet Explorer to Appear as a Different Version (Pocket PC) These settings allows you to change the way Pocket Internet Explorer appears to remote web sites. As some web site base the availability of SSL and other display parameters on this version information. Control Windows Animation on Handheld Devices (Pocket PC) The animation feature can make animated Windows look good, but it can also substantially slow down your handheld device. This setting allows you to control whether the function is enabled or disabled. Modify the Graphic Cache Size (Pocket PC) This setting controls the size of the glyph cache, by increasing this value you can increase graphics rendering speed by several times. Automatically Hide the Taskbar (Pocket PC) This setting controls whether the taskbar should be automatically hidden when not being accessed. Control Script Errors on Pocket Internet Explorer (Pocket PC) This setting allow you to control whether script errors generate a warning message on Pocket Internet Explorer. Enable ClearType Technology (Pocket PC) This setting controls the use of Clear Type text when rendering HTML documents with Pocket Internet Explorer. Home : Software : Windows Messenger Disable Background Notification Balloon in Messenger (All Windows) This tweak can be used to disable the popup message that notifies the user that Windows (MSN) Messenger is still running in the background when you close it. Remove Windows Messenger from Outlook Express (All Windows) Popular This tweak is used to remove MSN Instant Messenger functionality and integration from Outlook Express. Disable Windows Messenger in Outlook (All Windows) This setting can be used to disable the integration of Windows (MSN) Messenger so that is does not start when using Microsoft Outlook. Change the Messenger Warning Message (All Windows) When you start a chat in Windows Messenger a warning is shown that says "Never give out your password or credit card number in an instant message conversation". This tweak allows you to customize this message for example to display your company chat policy. Disable SSDP Discovery in Windows Messenger (Windows 2000/XP) Windows Messenger uses the Simple Service Discovery Protocol (SSDP) to attempt to locate upstream Internet gateways on UDP port 1900. This tweak allows you to disable Universal Plug and Play Network Address Translation discovery to reduce bandwidth and increase security. Disable MSN Instant Messenger (All Windows) Popular This restriction is used to disable the ability to run the Microsoft MSN Instant Messenger client. Remove Windows Messenger from Internet Explorer (All Windows) This tweak can be used to remove the integration of Windows Messenger into Internet Explorer. It will remove both the toolbar icon and Tools menu item. . sites. As some web site base the availability of SSL and other display parameters on this version information. Control Windows Animation on Handheld Devices (Pocket PC) The animation feature can