2 = The Timeout time was reached. 3 = The InputBox failed to open. This is usually caused by bad arguments. Remarks The InputBox is user-resizable, but has a minimum size of approximately 190 x 115 pixels. Default size is approximately 250 x 190 pixels. The string returned will not exceed 254 characters and if input contains carriage returns or linefeeds, the result will be truncated at the first occurrence of those characters. The second and subsequent characters of the password field can be used to restrict input. Use a space to fill the first character to still see the characters typed. Putting an M after the first character indicates that input is Mandatory; i.e. you must enter something. Nothing will happen if you press the Ok button when there is nothing in the InputBox. It will not close and return the string. You can also specify the maximum length in the end of the password field. Just enter a number as the last character to specify the length of the string. Related MsgBox Example ;Places the input box in the top left corner displaying the characters as they ;are typed. $answer = InputBox("Question", "Where were you born?", "Planet Earth", "", _ -1, -1, 0, 0) ;Asks the user to enter a password. Don't forget to validate it! $passwd = InputBox("Security Check", "Enter your password.", "", "*") ;Asks the user to enter a 1 or 2 character response. The M in the password ;field indicates that blank string are not accepted and the 2 indicates that the ;responce will be at most 2 characters long. $value = InputBox("Testing", "Enter the 1 or 2 character code.", "", " M2") Function Reference MsgBox Displays a simple message box with optional timeout. MsgBox ( flag, "title", "text" [, timeout [, hwnd]] ) Parameters flag The flag indicates the type of message box and the possible button combinations. See remarks. title The title of the message box. text The text of the message box. timeout [optional] Timeout in seconds. After the timeout has elapsed the message box will be automatically closed. The default is 0, which is no timeout. hwnd [optional] The window handle to use as the parent for this dialog. Return Value Success: Returns the ID of the button pressed. Failure: Returns -1 if the message box timed out. Button Pressed Return Value OK 1 CANCEL 2 ABORT 3 RETRY 4 IGNORE 5 YES 6 NO 7 TRY AGAIN ** 10 CONTINUE ** 11 Remarks The flag parameter can be a combination of the following values: decimal flag Button-related Result hexadecimal flag 0 OK button 0x0 1 OK and Cancel 0x1 2 Abort, Retry, and Ignore 0x2 3 Yes, No, and Cancel 0x3 4 Yes and No 0x4 5 Retry and Cancel 0x5 6 ** Cancel, Try Again, Continue 0x6 decimal flag Icon-related Result hexadecimal flag 0 (No icon) 0x0 16 Stop-sign icon 0x10 32 Question-mark icon 0x20 48 Exclamation-point icon 0x30 64 Information-sign icon consisting of an 'i' in a circle 0x40 decimal flag Default-related Result hexadecimal flag 0 First button is default button 0x0 256 Second button is default button 0x100 512 Third button is default button 0x200 decimal flag Modality-related Result hexadecimal flag 0 Application 0x0 4096 System modal (dialog has an icon) 0x1000 8192 Task modal 0x2000 decimal flag Miscellaneous-related Result hexadecimal flag 0 (nothing else special) 0x0 262144 MsgBox has top-most attribute set 0x40000 524288 title and text are right-justified 0x80000 ** Only valid on Windows 2000/XP and above. For example, to specify a SYSTEMMODAL box with the YES/NO buttons the flag value would be 4096+4 (or 4100) If using hexadecimal flags, that would be 0x1000+0x4 (or 0x1004). A message box appears centered on screen and resizes according to the text it contains. However, the title could get truncated if the SYSTEMMODAL flag (4096) is used If "title" is equal to Default keyword @Scriptname is used Related InputBox, ToolTip, TrayTip, SplashTextOn Example MsgBox(4096, "Test", "This box will time out in 10 seconds", 10) Function Reference ProgressOff Turns Progress window off. ProgressOff ( ) Parameters None. Return Value None. Remarks None. Related ProgressSet, ProgressOn Example ProgressOff()