THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 41 Support email: badaicadcam@gmail.com Place the slot onto the centre of the 90mm arc. Now use the pocket command once again to cut the pocket through the arm. This time use the fillet option to add a 1mm fillet top and bottom. 12 Fillets Activate the shapes context menu then select the fillet icon . Select the four edges between the boss’s and the centre section and click compute fillets. THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 42 Support email: badaicadcam@gmail.com Save the file with . Open the arm’s draft document to see that it has automatically been updated with the changes. THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 43 Support email: badaicadcam@gmail.com Yoke Topics covered: • Rectangular contour. • Extrude. • Chamfer. • Drilling a face. Use your newly acquired skills to model this part yourself (it needs to fit into the cut-out on the end of the shaft and the connecting rod fits inside the slot). THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 44 Support email: badaicadcam@gmail.com A-A 2 x M4 THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 45 Support email: badaicadcam@gmail.com THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 46 Support email: badaicadcam@gmail.com A-A 3 holes Ø5 THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 47 Support email: badaicadcam@gmail.com A-A 3 tapping holes M4x5 Counterbore Ø25x5 B-B THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 48 Support email: badaicadcam@gmail.com . shapes context menu then select the fillet icon . Select the four edges between the boss’s and the centre section and click compute fillets. THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM. this part yourself (it needs to fit into the cut-out on the end of the shaft and the connecting rod fits inside the slot). THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY. 2 x M4 THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM TECHNOLOGY .,CO.LTD Page 45 Support email: badaicadcam@gmail.com THE INTERGRATED CAD/CAM/ERP SOLUTION VIETNAM CAD/CAM