OmniSwitch CLI Reference Guide page -i Part No. 060218-10, Rev. L December 2009 OmniSwitch CLI Reference Guide www.alcatel-lucent.com ii OmniSwitch CLI Reference Guide December 2009 This user guide documents release 6.4.2 of the OmniSwitch 6400 Series, OmniSwitch 6850 Series, OmniSwitch 6855 Series, OmniSwitch 9000 Series, and OmniSwitch 9000E Series The functionality described in this guide is subject to change without notice. Copyright © 2009 by Alcatel-Lucent. All rights reserved. This document may not be reproduced in whole or in part without the express written permission of Alcatel-Lucent. Alcatel-Lucent ® and the Alcatel-Lucent logo are registered trademarks of Alcatel-Lucent. Xylan ® , OmniSwitch ® , OmniStack ® , and Alcatel-Lucent OmniVista ® are registered trademarks of Alcatel-Lucent OmniAccess™, Omni Switch/Router™, PolicyView™, RouterView™, SwitchManager™, VoiceView™, WebView™, X-Cell™, X-Vision™, and the Xylan logo are trademarks of Alcatel-Lucent This OmniSwitch product contains components which may be covered by one or more of the following U.S. Patents: • U.S. Patent No. 6,339,830 • U.S. Patent No. 6,070,243 • U.S. Patent No. 6,061,368 • U.S. Patent No. 5,394,402 • U.S. Patent No. 6,047,024 • U.S. Patent No. 6,314,106 • U.S. Patent No. 6,542,507 • U.S. Patent No. 6,874,090 26801 West Agoura Road Calabasas, CA 91301 (818) 880-3500 FAX (818) 880-3505 support@ind.alcatel.com US Customer Support—(800) 995-2696 International Customer Support—(818) 878-4507 Internet—eservice.ind.alcatel.com OmniSwitch CLI Reference Guide December 2009 iii Contents About This Guide xli Supported Platforms xli Who Should Read this Manual? xlii When Should I Read this Manual? xlii What is in this Manual? xlii What is Not in this Manual? xliii How is the Information Organized? xliii Text Conventions xliii Documentation Roadmap xlv Related Documentation xlvii User Manual CD xlix Technical Support xlix Chapter 1 CMM Commands 1-1 reload 1-2 reload working 1-4 copy running-config working 1-6 write memory 1-8 write memory flash-synchro 1-9 copy working certified 1-11 copy flash-synchro 1-13 takeover 1-14 show running-directory 1-16 show reload 1-19 show microcode 1-20 show microcode history 1-22 Chapter 2 Chassis Management and Monitoring Commands 2-1 system contact 2-3 system name 2-4 system location 2-5 system date 2-6 system time 2-7 system time-and-date synchro 2-8 system timezone 2-9 system daylight savings time 2-12 update 2-14 update lanpower 2-17 reload ni 2-18 iv OmniSwitch CLI Reference Guide December 2009 reload all 2-20 reload pass-through 2-22 power ni 2-24 temp-threshold 2-25 stack set slot 2-26 stack clear slot 2-28 show system 2-30 show hardware info 2-32 show chassis 2-34 show cmm 2-36 show ni 2-39 show module 2-42 show module long 2-44 show module status 2-46 show power 2-48 show fan 2-50 show temperature 2-52 show stack topology 2-54 show stack status 2-57 hash-control 2-59 show hash-control 2-61 license apply 2-62 show license info 2-63 show license file 2-64 Chapter 3 Chassis MAC Server (CMS) Commands 3-1 mac-range eeprom 3-2 mac-retention status 3-4 mac-retention dup-mac-trap 3-5 mac release 3-6 show mac-range 3-7 show mac-range alloc 3-9 show mac-retention status 3-11 Chapter 4 Power over Ethernet (PoE) Commands 4-1 lanpower start 4-3 lanpower stop 4-5 lanpower power 4-6 lanpower maxpower 4-8 lanpower priority 4-10 lanpower priority-disconnect 4-12 lanpower slot-priority 4-14 lanpower redundant-power 4-16 lanpower capacitor-detection 4-17 show lanpower 4-18 show lanpower capacitor-detection 4-22 show lanpower priority-disconnect 4-23 show lanpower slot-priority 4-24 Chapter 5 Network Time Protocol Commands 5-1 ntp server 5-2 ntp server synchronized 5-4 OmniSwitch CLI Reference Guide December 2009 v ntp server unsynchronized 5-5 ntp client 5-6 ntp src-ip preferred 5-7 ntp broadcast-client 5-9 ntp broadcast-delay 5-10 ntp key 5-11 ntp key load 5-13 ntp authenticate 5-14 ntp master 5-15 ntp interface 5-16 ntp max-associations 5-17 ntp broadcast 5-18 ntp peer 5-20 show ntp status 5-22 show ntp client 5-24 show ntp client server-list 5-26 show ntp server client-list 5-28 show ntp server status 5-30 show ntp keys 5-34 show ntp peers 5-36 show ntp server disabled-interfaces 5-38 Chapter 6 Session Management Commands 6-1 session login-attempt 6-3 session login-timeout 6-4 session banner 6-5 session timeout 6-7 session prompt 6-9 session xon-xoff 6-10 prompt 6-11 show prefix 6-13 alias 6-14 show alias 6-16 user profile save 6-17 user profile reset 6-18 history size 6-19 show history 6-20 ! 6-22 command-log 6-24 kill 6-25 exit 6-26 whoami 6-27 who 6-30 show session config 6-32 show session xon-xoff 6-34 more size 6-35 more 6-36 show more 6-37 telnet 6-38 telnet6 6-39 ssh 6-41 ssh6 6-43 vi OmniSwitch CLI Reference Guide December 2009 ssh enforce pubkey-auth 6-45 show ssh config 6-46 show command-log 6-48 show command-log status 6-50 Chapter 7 File Management Commands 7-1 cd 7-3 pwd 7-5 mkdir 7-6 rmdir 7-8 ls 7-10 dir 7-12 rename 7-14 rm 7-16 delete 7-18 cp 7-19 scp 7-21 mv 7-23 move 7-25 chmod 7-27 attrib 7-28 freespace 7-29 fsck 7-30 newfs 7-32 rcp 7-33 rrm 7-35 rls 7-36 vi 7-38 view 7-39 tty 7-40 show tty 7-42 more 7-43 ftp 7-45 ftp6 7-47 scp-sftp 7-49 show ssh config 7-50 sftp 7-52 sftp6 7-54 tftp 7-56 rz 7-58 Chapter 8 Web Management Commands 8-1 http server 8-2 http ssl 8-3 http port 8-4 https port 8-5 debug http sessiondb 8-6 show http 8-8 Chapter 9 Configuration File Manager Commands 9-1 configuration apply 9-2 configuration error-file limit 9-4 OmniSwitch CLI Reference Guide December 2009 vii show configuration status 9-6 configuration cancel 9-8 configuration syntax check 9-9 configuration snapshot 9-11 show configuration snapshot 9-14 write terminal 9-17 Chapter 10 SNMP Commands 10-1 snmp station 10-3 snmp source ip preferred 10-5 show snmp station 10-6 snmp community map 10-8 snmp community map mode 10-10 show snmp community map 10-11 snmp security 10-12 show snmp security 10-14 show snmp statistics 10-16 show snmp mib family 10-18 snmp trap absorption 10-19 snmp trap to webview 10-20 snmp trap replay 10-21 snmp trap filter 10-23 snmp authentication trap 10-25 show snmp trap replay 10-26 show snmp trap filter 10-28 show snmp authentication trap 10-30 show snmp trap config 10-31 Chapter 11 DNS Commands 11-1 ip domain-lookup 11-2 ip name-server 11-3 ipv6 name-server 11-5 ip domain-name 11-7 show dns 11-8 Chapter 12 Link Aggregation Commands 12-1 static linkagg size 12-3 static linkagg name 12-5 static linkagg admin state 12-6 static agg agg num 12-7 lacp linkagg size 12-9 lacp linkagg name 12-12 lacp linkagg admin state 12-13 lacp linkagg actor admin key 12-15 lacp linkagg actor system priority 12-16 lacp linkagg actor system id 12-17 lacp linkagg partner system id 12-18 lacp linkagg partner system priority 12-20 lacp linkagg partner admin key 12-21 lacp agg actor admin key 12-22 lacp agg actor admin state 12-25 lacp agg actor system id 12-27 viii OmniSwitch CLI Reference Guide December 2009 lacp agg actor system priority 12-29 lacp agg partner admin state 12-31 lacp agg partner admin system id 12-33 lacp agg partner admin key 12-35 lacp agg partner admin system priority 12-37 lacp agg actor port priority 12-39 lacp agg partner admin port 12-41 lacp agg partner admin port priority 12-43 show linkagg 12-45 show linkagg port 12-50 Chapter 13 Interswitch Protocol Commands 13-1 amap 13-2 amap discovery time 13-3 amap common time 13-5 show amap 13-7 Chapter 14 802.1Q Commands 14-1 vlan 802.1q 14-2 vlan 802.1q frame type 14-4 show 802.1q 14-6 Chapter 15 Distributed Spanning Tree Commands 15-1 bridge mode 15-4 bridge protocol 15-6 bridge cist protocol 15-8 bridge 1x1 protocol 15-10 bridge mst region name 15-12 bridge mst region revision level 15-14 bridge mst region max hops 15-15 bridge msti 15-17 bridge msti vlan 15-19 bridge priority 15-21 bridge cist priority 15-23 bridge msti priority 15-25 bridge 1x1 priority 15-27 bridge hello time 15-29 bridge cist hello time 15-31 bridge 1x1 hello time 15-33 bridge max age 15-35 bridge cist max age 15-37 bridge 1x1 max age 15-39 bridge forward delay 15-41 bridge cist forward delay 15-43 bridge 1x1 forward delay 15-45 bridge bpdu-switching 15-47 bridge path cost mode 15-49 bridge auto-vlan-containment 15-51 bridge slot/port 15-53 bridge cist slot/port 15-55 bridge 1x1 slot/port 15-57 bridge slot/port priority 15-59 OmniSwitch CLI Reference Guide December 2009 ix bridge cist slot/port priority 15-61 bridge msti slot/port priority 15-63 bridge 1x1 slot/port priority 15-65 bridge slot/port path cost 15-67 bridge cist slot/port path cost 15-71 bridge msti slot/port path cost 15-75 bridge 1x1 slot/port path cost 15-78 bridge slot/port mode 15-81 bridge cist slot/port mode 15-83 bridge 1x1 slot/port mode 15-85 bridge slot/port connection 15-87 bridge cist slot/port connection 15-89 bridge 1x1 slot/port connection 15-91 bridge cist slot/port admin-edge 15-93 bridge 1x1 slot/port admin-edge 15-95 bridge cist slot/port auto-edge 15-97 bridge 1x1 slot/port auto-edge 15-99 bridge cist slot/port restricted-role 15-101 bridge 1x1 slot/port restricted-role 15-103 bridge cist slot/port restricted-tcn 15-105 bridge 1x1 slot/port restricted-tcn 15-107 bridge cist txholdcount 15-109 bridge 1x1 txholdcount 15-110 bridge port 10gig os8800optimized 15-111 bridge rrstp 15-112 bridge rrstp ring 15-113 bridge rrstp ring vlan-tag 15-115 bridge rrstp ring status 15-117 show spantree 15-118 show spantree cist 15-124 show spantree msti 15-128 show spantree 1x1 15-133 show spantree ports 15-137 show spantree cist ports 15-146 show spantree msti ports 15-150 show spantree 1x1 ports 15-156 show spantree mst region 15-162 show spantree msti vlan-map 15-164 show spantree cist vlan-map 15-166 show spantree map-msti 15-168 show spantree mst port 15-169 show bridge rrstp configuration 15-171 show bridge rrstp ring 15-172 bridge mode 1x1 pvst+ 15-174 bridge port pvst+ 15-175 Chapter 16 Ethernet Ring Protection Commands 16-1 erp-ring 16-3 erp-ring protected-vlan 16-6 erp-ring rpl-node 16-8 erp-ring wait-to-restore 16-10 erp-ring enable 16-11 x OmniSwitch CLI Reference Guide December 2009 erp-ring ethoam-event remote-endpoint 16-12 erp-ring guard-timer 16-14 clear erp statistics 16-15 show erp 16-17 show erp protected-vlan 16-20 show erp statistics 16-22 Chapter 17 Source Learning Commands 17-1 mac-address-table 17-2 mac-address-table vpls permanent sap 17-4 mac-address-table vpls permanent mesh-sdp 17-6 mac-address-table static-multicast 17-8 mac-address-table aging-time 17-10 source-learning 17-12 source-learning chassis-distributed 17-14 show mac-address-table 17-15 show mac-address-table all 17-18 show mac-address-table vpls 17-20 show mac-address-table vpls sap 17-22 show mac-address-table vpls mesh-sdp 17-24 show mac-address-table static-multicast 17-26 show mac-address-table count 17-29 show mac-address-table vpls count 17-31 show mac-address-table all count 17-33 show mac-address-table aging-time 17-35 show source-learning 17-36 show source-learning chassis-distributed 17-38 Chapter 18 Learned Port Security Commands 18-1 port-security 18-2 port-security shutdown 18-4 port-security maximum 18-6 port-security max-filtering 18-8 port-security convert-to-static 18-9 port-security mac 18-11 port-security mac-range 18-13 port-security violation 18-15 port-security release 18-17 port-security learn-trap-threshold 18-19 show port-security 18-20 show port-security shutdown 18-23 Chapter 19 Ethernet Port Commands 19-1 trap port link 19-4 interfaces speed 19-6 interfaces mode 19-8 interfaces autoneg 19-10 interfaces crossover 19-12 interfaces pause 19-14 interfaces e2e-flow-vlan 19-17 interfaces duplex 19-19 interfaces admin 19-21 [...]... 27-7 lldp notification 27-9 lldp tlv management .27-11 lldp tlv dot1 27-13 lldp tlv dot3 27-15 lldp tlv med 27-17 show lldp system-statistics 27-19 show lldp statistics .27-21 show lldp local-system 27-23 show lldp local-port 27-25 show lldp local-management-address 27-27 show lldp remote-system... egress-label 26-104 show service ingress-label 26-106 show service fdb-info 26-108 show service fdb-mac 26-110 Chapter 27 802.1AB Commands 27-1 lldp transmit interval 27-2 lldp transmit hold-multiplier 27-3 lldp transmit delay 27-4 lldp reinit delay .27-5 lldp notification interval 27-6 lldp lldpdu... show health .50-9 show health all 50-11 show health slice 50-13 show health fabric 50-15 Chapter 51 sFlow Commands 51-1 sflow agent .51-3 sflow receiver 51-4 xxx OmniSwitch CLI Reference Guide December 2009 sflow sampler 51-6 sflow poller .51-8 show sflow agent 51-10 show sflow... hello-interval 43-75 ip isis interface level hello-multiplier 43-76 ip isis interface level metric 43-77 ip isis interface level passive 43-79 ip isis interface level priority 43-80 show ip isis interface 43-82 clear ip isis adjacency 43-86 clear ip isis lsp-database .43-88 clear ip isis spf-log .43-89 clear ip isis... .20-18 vlan ip 20-20 vlan ipx 20-22 vlan protocol 20-24 vlan port 20-26 vlan port mobile 20-28 vlan port default vlan restore 20-30 vlan port default vlan 20-32 vlan port authenticate 20-34 vlan port 802.1x 20-35 show vlan rules .20-37 show vlan port mobile 20-39... show policy classify source ip 53-176 show policy classify destination ip .53-178 show policy classify multicast ip .53-180 show policy classify tos 53-182 show policy classify dscp 53-184 show policy classify ip protocol 53-186 show policy classify source ip port 53-188 show policy classify destination ip port .53-190 show policy network... neighbor clear soft .44-96 ip bgp policy aspath-list .44-97 ip bgp policy aspath-list action 44-100 ip bgp policy aspath-list priority 44-102 ip bgp policy community-list .44-104 ip bgp policy community-list action 44-106 ip bgp policy community-list match-type 44-108 ip bgp policy community-list priority 44-110 xxvi OmniSwitch CLI Reference. .. csnp-interval 43-64 ip isis interface hello-auth-type 43-65 ip isis interface level-capability 43-67 ip isis interface lsp-pacing-interval 43-68 ip isis interface passive 43-70 ip isis interface retransmit-interval .43-71 ip isis interface default-type 43-72 ip isis interface level hello-auth-type 43-73 ip isis interface level hello-interval... mpls interface label-map pop 25-10 configure router mpls interface label-map shutdown 25-12 configure router mpls static-lsp 25-14 configure router mpls static-lsp shutdown 25-16 configure router mpls static-lsp to 25-18 configure router mpls static-lsp push next-hop 25-20 configure router mpls interface label-map protect-swap next-hop 25-22 show router mpls... 53-216 OmniSwitch CLI Reference Guide December 2009 xxxiii show active policy list 53-218 show policy list 53-220 Chapter 54 Policy Server Commands 54-1 policy server load 54-2 policy server flush 54-3 policy server 54-4 show policy server 54-6 show policy server long 54-8 show policy server statistics . 27-3 lldp transmit delay 27-4 lldp reinit delay 27-5 lldp notification interval 27-6 lldp lldpdu 27-7 lldp notification 27-9 lldp tlv management 27-11 lldp tlv dot1 27-13 lldp tlv dot3 27-15 lldp. OmniSwitch CLI Reference Guide page -i Part No. 060218-10, Rev. L December 2009 OmniSwitch CLI Reference Guide www.alcatel-lucent.com ii OmniSwitch CLI Reference Guide December 2009 This. 27-15 lldp tlv med 27-17 show lldp system-statistics 27-19 show lldp statistics 27-21 show lldp local-system 27-23 show lldp local-port 27-25 show lldp local-management-address 27-27 show lldp remote-system