213 CHAPTER Processing Photos in the Camera Raw Workspace IN THIS CHAPTER Light settings Color correction Targeted adjustments Fun effects Finishing touches N ow that you are familiar with the Camera Raw workspace and the preferences and menus, it’s time to jump in and start adjusting your raw images. In some cases, you will find the tools and controls so easy to use that you may start opening your JPEGs and TIFFs in Camera Raw in order to quickly make the basic adjustments. In other cases, if you are familiar with Photoshop, you will be frustrated that the tools are so com- pletely foreign and have so little actual capability compared to what is avail- able to you in Photoshop. The Camera Raw Tools Before you can make adjustments in Camera Raw, you must understand the tools and how they work. The tools are found at the top of Camera Raw, as shown in Figure 8.1. Some of them are fairly basic, and you are probably already familiar with how they work, such as the Zoom and Hand tools. Other tools have detailed functions, such as the Targeted Adjustment tool and the Graduated Filter. I cover the more detailed tools in depth later in this chapter. For now, I’ll provide you with a quick reference list: l Zoom tool: Use this tool to get a closer look at an area of your photo. The photo zooms to the point where you click the Zoom tool. To zoom back out, just press and hold the Alt or Option key to change the plus sign in the magnifying glass to a minus sign. You also can use the Zoom menu at the bottom of the document win- dow to choose a setting. 13_584743-ch08.indd 21313_584743-ch08.indd 213 5/3/10 10:22 AM5/3/10 10:22 AM Part II: Working with Camera Raw Images 214 l Hand tool: Use this tool when your image is bigger than the document window; you can grab it with the Hand tool and move it around in your window to look at other areas of your photo. FIGURE 8.1 The tools in Camera Raw Crop Rotate Adjustment Brush Hand Zoom Target Adjustment Toggle Full Screen Mode Straighten White Balance Spot Removal Color Sampler Red Eye Remover Graduated Filter Open Preferences l White Balance tool: Use this tool to select an area of your photo that is white or neutral gray and change the white balance of your photo based on that selection. l Color Sampler: Use this tool to find the RGB values of areas in your image. These values change as you correct the tone and color of your photo, giving you a numerical represen- tation of the changes taking place in your image. Simply click a color in your photo to place a marker and display the RGB settings above the image, as shown in Figure 8.2. You can place up to ten color samples. To clear the color samples, click Clear Samples. l Targeted Adjustment tool: This tool allows you to choose one pixel in your image and change its value in the histogram, which changes the values of the other colors in the his- togram as well. Click the area of your photo that you want to adjust and hold down the left mouse key while you drag side to side or up and down. This changes the value of the pixel you click, changing the relative values in the histogram. If you clicked a darker pixel, the darker areas of your photo change dramatically while the lighter areas do not change as much. This holds true if you click a midtone or light area of your photo as well. Those areas are more affected than others. Cross-Ref Again—and I promise it will happen often throughout the book—knowing how the histogram works and how colors relate are important to understanding how the Color Sampler and the Targeted Adjustment tools work. That’s why we gave them their own chapter, Chapter 4. n 13_584743-ch08.indd 21413_584743-ch08.indd 214 5/3/10 10:22 AM5/3/10 10:22 AM Chapter 8: Processing Photos in the Camera Raw Workspace 215 FIGURE 8.2 The Color Sample RGB information corresponds to the numbered color sample areas displayed in the photo. Color Sample RGB values l Crop: The Crop tool in Camera Raw is fairly straightforward. Just select it and drag around the area you want to crop. If you want to straighten as well, just use the rotating arrow that appears when you hover over one of the corners and rotate the cropped area. Double-click to finish. One difference you’ll note about cropping in Camera Raw is that even cropping is a non-destructive edit. Even after opening and closing the image and cre- ating numerous other settings, you can click the Crop tool to display the entire image and reset the crop boundaries, as shown in Figure 8.3. l Straighten: Use this tool to straighten a photo. Drag it in what should be a straight line in your photo, and your image rotates to compensate. This tool is also non-destructive; you can correct the results at any time. 13_584743-ch08.indd 21513_584743-ch08.indd 215 5/3/10 10:22 AM5/3/10 10:22 AM Part II: Working with Camera Raw Images 216 FIGURE 8.3 I cropped this image the last time I opened it. I can change the crop by clicking the Crop tool and displaying the entire image. Cross-Ref Except for being non-destructive, cropping and straightening work in Camera Raw just like they work in Photoshop. That’s why they get just a measly little bullet point here. If you want to read more about cropping or straightening, look in Chapter 3. n l Spot Removal: You can use this tool to correct areas in your photo that need touchups. I cover this tool in greater detail later in this chapter. l Red-Eye Removal: Use this tool to correct red-eye. This is covered later in this chapter. l Adjustment Brush: You can make adjustments to just one area of your photo in Camera Raw using this tool. It’s more complicated than it sounds, though, so I take you through it step by step later in this chapter. l Graduated Filter: This tool allows you to make gradual changes to areas of your photo. For instance, you may have a darker foreground coupled with an overexposed sky. Use this tool to correct one or the other gradually for realistic results. I show you how later in this chapter. 13_584743-ch08.indd 21613_584743-ch08.indd 216 5/3/10 10:22 AM5/3/10 10:22 AM Chapter 8: Processing Photos in the Camera Raw Workspace 217 Synchronizing Adjustments in Multiple Raw Images You can correct several photos at once using the Camera Raw dialog box. This is a real timesaver if your photos have been taken in similar lighting conditions. You might have several outdoor shots of the same wedding, for example. When you make changes to the photo that is displayed in Camera Raw, those changes are applied to any selected photo in the filmstrip as well. Using the Synchronize option, you can choose which changes apply to selected photos and which ones do not apply to other selected photos in the filmstrip. To make changes to more than one photo, these photos must first be open in Camera Raw. Select more than one image in Bridge, and double-click to open them in Camera Raw. You see them dis- played in the filmstrip in Camera Raw, as shown in Figure 8.4. FIGURE 8.4 When you open more than one photo in Camera Raw, they appear in the filmstrip. 13_584743-ch08.indd 21713_584743-ch08.indd 217 5/3/10 10:22 AM5/3/10 10:22 AM Part II: Working with Camera Raw Images 218 You can select more than one image at once by using the Shift key to select images in sequence or the Ctrl/Ô key to select images one at a time. You also can click Select All to select all the images in the filmstrip. To Synchronize which changes are made to all the selected images, click Synchronize. This opens the Synchronize dialog box, shown in Figure 8.5. Use the drop-down menu or individual check marks to select which options change across all the selected photos in Camera Raw. FIGURE 8.5 Use the Synchronize menu to choose which changes will be universally made. After you are finished making batch changes, you can select your photos one at time to preview the changes and tweak them individually, but the bulk of the adjustments already are made, saving you lots of time in processing your files. Adjusting the White Balance Your camera has a White Balance setting that tells it what lighting is being used when a photo is captured. A fluorescent light leaves a greenish-yellow cast on your photos, giving your whites a greenish-yellow tinge, for example. Your camera can compensate by adjusting the color information 13_584743-ch08.indd 21813_584743-ch08.indd 218 5/3/10 10:22 AM5/3/10 10:22 AM . are familiar with Photoshop, you will be frustrated that the tools are so com- pletely foreign and have so little actual capability compared to what is avail- able to you in Photoshop. The Camera. of the document win- dow to choose a setting. 13_584743-ch08.indd 2 1313 _584743-ch08.indd 213 5/3/10 10:22 AM5/3/10 10:22 AM Part II: Working with Camera Raw Images 214 l Hand tool: Use this tool. 215 5/3/10 10:22 AM5/3/10 10:22 AM Part II: Working with Camera Raw Images 216 FIGURE 8.3 I cropped this image the last time I opened it. I can change the crop by clicking the Crop tool and displaying