1. Trang chủ
  2. » Luận Văn - Báo Cáo

a report on comparative advantage of the vietnamese economic growth in steel industry under the effects of covid 19

25 0 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Comparative Advantage of the Vietnamese Economic Growth in Steel Industry Under the Effects of Covid-19
Tác giả Nguyộn Thu Huong, Nguyen Thi Thanh Hang, Đỗ Thị Hồng, Lụ Thị Trà My, Bựi Phương Thảo, Nguyễn Thị Minh Thư
Chuyên ngành International Economics
Thể loại Report
Năm xuất bản 2021
Thành phố Hanoi
Định dạng
Số trang 25
Dung lượng 2,49 MB

Nội dung

Then, steel industry is an emerging industry that provide a potential chance for Vietnamese economic growth along with the development of steel corporation.. CHAPTER 2: THE VIETNAMESE ST

Trang 1

INS2005 INTERNA TIONAL ECONOMICS

A REPORT ON COMPARATIVE ADVANTAGE OF THE VIETNAMESE ECONOMIC GROWTH IN STEEL INDUSTRY UNDER THE EFFECTS OF COVID-19

Prepared by Group 09:

4/ Lô Thị Trà My ID: 19071428 5/ Bùi Phương Thảo ID: 18071409

Hanoi, October 2021

Trang 2

TABLE OF CONTENT

HT 0n 6n 0n 6 3

Nho oan: 4

CHAPTER 1: OVERVIEW THE VIETNAMESE ECONOMY AND STEEL INDUSTRY 5 ID ốc oan 5

IAN (Gái 20 ii na 5

CHAPTER 2: THE VIETNAMESE STEEL INDUSTRY’S GROWTH 6

2.1 Value Chain Analysis .cccccccccccsscssccsscsseeseesseeseesssesscsscsssesecsecesecsseeseeseserssnseesssssseeenees 6 2.2 Economic Factors ố 9

2.3, Production Situation 11

PIN Làn nh ố 13

CHAPTER 3: COMPETITIVE ADVANTAGES OF STEEL INDUSTRY 14 EN ion» na ốố 14

3.1.1 Steel Production 2 14

EU on na ố 15

3.2 Demand Conditions 2000.0 .ốố 15

KPANG np na 15

Kon 69 0n e 16

E000 0° ad 4 17

3.4 Strategles and COompe€fIfIO c2 2111911911311 31111111 111011111111 181111 11112111 111 11H rry 17 Em na 17

E ven ion .a 18

CHAPTER 4: CONCLUSION 19 “Na 19

m ẽ 20

VAN dai 20

NV PL nn a 20

ỐC co na ố 21

Page 2 of 25

Trang 3

INTRODUCTION

e About our group

We are Group 9 with 6 members

Trang 4

e About this report

Nowadays, international trade is a tendency of commerce all over the world, so analytical skill is becoming increasingly important in the field of trade In general, knowing the situation of home country’s economic is the basic fundamental to develop any businesses and operations Face with the situation of Covid-19 pandemic, Vietnamese economy still has the advantages not to deeply influence Then, steel industry is an emerging industry that provide

a potential chance for Vietnamese economic growth along with the development of steel corporation

Given the importance of analytical skill, this paper will research in the Vietnamese economic growth in steel industry based on the real situation and its competitive advantages

In addition, this paper will give some assessment as long as recommendations to benefit from this industry

By reading this report, you will have knowledge about the growth of Vietnamese economy in steel industry then aware about its competitive advantages in the context of Covid-19

pandemic

HOPE YOU LIKE IT!

Page 4 of 25

Trang 5

CHAPTER 1: OVERVIEW THE VIETNAMESE ECONOMY AND STEEL INDUSTRY

1.1 Vietnamese Economy

In recent years, Vietnam's economy has been spectacular The economic and political reforms under renovation period have resulted in fast corporate finance growth, changing Vietnam to a middle-income country

Despite of the fact that the economy was severely impacted by the Covid-19 epidemic

in 2020, the Vietnamese economy increased by approximately 3%, making it one of the few countries in the region and the world to have positive growth The macro-economy is largely stable, and markets run smoothly, allowing people and businesses to concentrate on production

and business

During the time 2016-2020, the inflation rate was steadily reduced from three digits in the early years of the renovation era to the goal level of 4% With a slew of large-scale and high-tech projects, foreign direct investment capital soared, opening up a slew of prospects for

domestic economic cooperation in production, business, and technology transfer

Recently, Vietnam has signed two high-potential accords, EVFTA and RCEP, and has gone from being a deficit country to balancing imports and exports, even having a trade surplus Vietnam's economy grew solidly at 5.6 percent in the first half of 2021, according to a new

World Bank assessment, but it faced major threats both within and outside

1.2 Vietnamese Steel Industry

The Covid-19 pandemic has hit many parts of the globe for a long time, the domestic steel industry continues to face challenges due to the stagnation of manufacturing industries

Trang 6

using steel for construction industry, infrastructure, automobiles, motorbikes and competitive

pressure from increasing domestic supply

However, in 2020, despite facing many difficulties due to complicated developments

of the Covid-19 epidemic, the steel industry still recorded good growth In addition, in the face

of opportunities from integration, especially the implementation of trade agreements, the removal of a series of tariffs will help Vietnamese steel enterprises expand the export market Besides, the import of raw materials from countries in the bloc that have signed FTAs will also help Vietnam benefit in price Facing opportunities from international economic integration, especially the implementation of new agreements, the steel industry is expected to have more conditions to attract investment, promote production and export to new markets However, at present, the steel industry still has to compete fiercely with imported steel penetrating strongly into the Vietnamese market

CHAPTER 2: THE VIETNAMESE STEEL INDUSTRY’S GROWTH 2.1, Value Chain Analysis

The typical value chain in steel industry includes the production of hot rolled coil

(HRC) from iron ore, as known from the raw materials Iron ore, coal and lime are smelted into pig iron From smelted cast iron to Steel slab, from rolled billet to hot rolled coil, then continue

the cold rolling process to achieve the required thickness and hardness, the product is cold rolled steel (CRC) From cold rolled steel, people use it to galvanize, cold galvanize (GI/GL)

to use or continue to color it into color coated corrugated iron (PPGI)

Figure 2.1.1

Steel production process

Page 6 of 25

Trang 7

at

Currently, Vietnam's steel industry is lacking in two production stages in the steel industry value chain, which is the production of slabs (slab) and hot rolled coil (HRC) leads Vietnam have to import 100%,

Domestic companies have not yet made any noticeable move to invest in HRC production plants, the reason why investing in this industry requires large capital investment and high-tech workforce Investment capital in a hot rolled steel factory with a capacity of 1.2 million tons per year, produced from slab billets will cost about $ 400 million

In this value chain, Vietnam only owns 40%, may not meet the regulations on the proportion of domestically produced goods according to the rules of origin in the TPP: this ratio can fluctuate from 35-55 % depends on the specific industry Therefore, after applying TPP, Japan has the advantage of supplying HRC to Vietnam Because if using Japan's HRC, Vietnam's coated steel products will reach the origin of nearly 100% of domestic production in the TPP

Figure 2.1.2

Vietnam value chain in steel industry

Trang 8

Scrap

Công nghệ

(Steelmaking )

Công nghệ lò cao uyện thép từ quặng sắt: Tisco

= —=———_- Plate

Billet a (HRC

[Hot strip mill Nhập khẩu 100% HRC

In the next few years, Formosa HT has the advantage of supplying HRC steel The year

2020 is a lucky year for Vietnam's steel sector, particularly the galvanized steel industry No one could have predicted such a significant comeback in galvanized steel demand, especially

in the third quarter of 2020, from both the local and foreign markets For three years in a row, the output of galvanized steel sheet manufacture has remained steady 4.4 million tons in 2018,

4.2 million tons in 2019, and 4.4 million tons in 2020

In addition, Vietnam's galvanized steel products have a prominent international presence, with annual exports of 1.4-1.75 million tons earning over one billion dollars and helping to the reduction of the iron trade deficit Every year, around 5 billion dollars are spent

on steel

Page 8 of 25

Trang 9

2.2 Economic Factors

Vietnam's economy has been overgrowing for several years The increasing development of steel demand has enticed numerous steel companies to invest in new production facilities in Vietnam

Figure 2.2.1:

Vietnam GDP growth rate in 2016-2020

TONG SAN PHAM TRONG NƯỚC

giai đoạn 2016-2020 (%) giai đoạn 2016-2020 (%)

Moreover, Vietnam has low-interest rates in 2020 reported at 6,2729 Vietnam's steel

consumption per capita is at 149.7kg/person in 2010 By 2019, the average steel consumption per capita has increased to 241kg, ranking 4th among the countries ASEAN countries

Trang 10

Figure 2.2.2:

Vietnam's per capita crude steel consumption ranks in four in ASIAN (2018)

ANNUAL STEEL CONSUMPTION PER CAPITA

Source: South East Asian lron and Steel Institute

news/metals/1011 19-analysis-aseans-20 19-2020-scrap-needs-to-grow-amid-steel-glut- concerns

Balanced development Vietnam's steel industry in recent years has developed relatively quickly Vietnam has high potential for export growth Despite the COVID-19 pandemic, Vietnam exported 9.86 million tons of steel worth $5.26 billion in 2020, up 47.9% over the same period last year

In the 2016-2020 period, Vietnam's economy has always maintained macroeconomic stability, average inflation increased by 3.15%/year, lower than the 4% target set by the National Assembly Inflation pressure will cool down from August to December 2021 thanks

to a decrease in the CPI of the food group and keeping the forecast of the average CPI in 2021 increasing by 2.9% over the same period In particular, construction steel price carried an uptrend in the context of the price of input materials such as iron ore, steel billet, scrap, and transportation costs continued to increase

Page 10 of 25

Trang 11

2.3 Production Situation

Although the unexpected pandemic made the situation difficult for the steel industry, the case has been improving as the government's control of the health crisis and the prime minister's drastic directions sped up public investment Steel production of all kinds hit 2.45 million tons in November, rising 4.34 percent month over month and 15.6 percent year over

year In addition, sales were 2.45 million tons, a significant rise of 36.9% over October In

2020, Vietnam's steel industry has risen to 14th place in the world This is a very good step forward on the world steel industry map, Vietnam's crude steel production has reached a very high level of 19.5 million tons/year

Figure 2.3.1

Steel production in 2020

Note Adapted from: https://vir.com.vn/support-recovery-for-the-steel-sector-8 1622 html

In terms of crude steel, steel companies in Vietnam produced 3,192,000 tons during this time, up 28% from the same period in 2020 Consumption increased by 35% year on year

to 3,126,000 tons When it comes to construction steel, both manufacturing output and consumption have declined since January 2021 and the same period in 2020 but this increased somewhat in the first two months of 2021 compared to the same period last year

Trang 12

The Covid-19 pandemic has had a minor influence on Vietnam's steel output Still, it has had a considerable impact on other nations, providing the opportunity for Vietnamese

manufacturers to extend their market share, especially in the EU, China and Thailand

Figure 2.3.2

Vietnam's steel export volume, by country (tons)

Note Adapted from: https://hanoitimes-vn.translate.goog/vietnam-steel-export-in-202 |-set-to- grow-further-3 16030.html? x tr sch=http& x tr sl=en&_x tr tl=vi&_x tr hl=vi&_x tr Then, in the export field, according to the General Department of Vietnam Customs, Vietnam exported 9.86 million tons of steel and received $5.26 billion in 2020, representing a growth of 47.9% and 25% year over year Furthermore, according to World Steel, 1.65 billion tons of crude steel will be produced this year, with production rising by 3.8% to 1.71 billion tons in 2021

Figure 2.3.3

Steel export growth, by segment

Page 12 of 25

Trang 13

Note Adapted from: _ http://m.hanoitimes.vn/vietnam-steel-export-in-202 | -set-to-grow- further-3 16030.html

On the other hand, the total amount of iron and steel imported into Vietnam in 2020

was approximately 13.26 million tons, worth nearly $ 8.1 billion; the average price per ton was

608.4 USD Its volume, turnover, and price have all decreased by 8.9%, 15.2%, and 6.9%,

respectively, when compared to 2019

2.3 Main Businesses

In the first half of 2020, due to the impact of the Covid-19 pandemic Having many members of the Vietnam Steel Association (VSA) experienced a decrease in revenue However, the market started to have positive changes in the second half of 2020 that prominent businesses gain profit back

First of all to mention is Formosa Ha Tinh Steel Corporation The company's total sales

in the first quarter of 2021 were 1,094 million dollars, up 56 percent over the same period in

2020 Sheet billet, large plate billet, and small plate billet output totaled 1,627 thousand tons,

an increase of 17% over the same year

Trang 14

Secondly, Hoa Phat Group is one of Vietnam's leading industrial manufacturing conglomerates Hoa Phat Group is Vietnam's most significant construction steel and steel pipe maker, with market shares of 32.5 percent and 31.7 percent, respectively, with a capacity of over 8 million tons of steel of all kinds

Last but not least, Hoa Sen Group Joint Stock Company was the first private company

in Vietnam to develop a cold-rolled steel plant Hoa Sen Group expects to sell 1.8 million tons

of steel of all kinds in 2021, up 11% from the previous year

CHAPTER 3: COMPETITIVE ADVANTAGES OF STEEL INDUSTRY 3.1 Factor of Production

3.1.1 Steel Production

The general technology level of Vietnam's steel industry is not high but most steel factories in our coutry perform the final stage of rolling steel as pushing the advantage Some enterprises with geographical advantages such as Thai Nguyen exploit ore and produce steel

by blast furnace technology Some enterprises established in recent years scrap steel and use electric arc furnace to produce billet and steel Although the highest furnace in Vietnam is only

500 m3 like Thai Nguyen steel, this still produce the suitable amount of production to meet the

demands

In Vietnam, most of the scrap steel 1s used to produce billets and completely square billets to make construction steel Domestic production of square billet can meet about 50% of steel rolling demand, the remaining 50% is from imported sources So, domestic steel prices

do not fluctuate too much with the world billet prices

Page 14 of 25

Ngày đăng: 08/08/2024, 21:53

TÀI LIỆU CÙNG NGƯỜI DÙNG

TÀI LIỆU LIÊN QUAN