CCNA1 SKILL BASED EXAMINATION - Number 3 doc

Full name: _________________________________ Class: _____________ CCNA1 SKILL BASED EXAMINATION Duration: 80 minutes No documents allowed Configuration requirements: (8 marks) 1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 3. Perform Basic Router Configurations all Routers. 4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol. Challenge questions: (2 marks) 1 Number 3 1. How many bits need to be borrowed if the Classfull subneting technique is used ? _________ Subnet 1: ___________________________________ Subnet 2: ___________________________________ Subnet 3: ___________________________________ 2. How many addresses for hosts will the network 124.12.4.0/23 provide? A. 510 B. 512 C. 1022 D. 1024 E. 2046 F. 2048 2 . Full name: _________________________________ Class: _____________ CCNA1 SKILL BASED EXAMINATION Duration: 80 minutes No documents allowed Configuration requirements: (8 marks) 1. Calculating. address for PC2. 3. Perform Basic Router Configurations all Routers. 4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol. Challenge questions: (2 marks) 1 Number 3 1. How many. 2: ___________________________________ Subnet 3: ___________________________________ 2. How many addresses for hosts will the network 124.12.4.0/ 23 provide? A. 510 B. 512 C. 1022 D. 1024 E. 2046 F.