Machining of High Strength Steels With Emphasis on Surface Integrity by air force machinability data center_13 doc

Kops, L. Gould, M. and Mizrach, M. Improved Analysis of the Workpiece Accuracy in Turning, based on the Emer- ging Diameter. ASME Pub., J. of Engg. for Ind., Vol. 115, 253–257, Aug. 1997. Koster, W.P., Field, M., Fritz, L.J., Gatto, L.R. and Kahles, J.F. Surface Integrity of Machined Structural Compo- nents. Airforce Matls. Lab. Tech. Report: AFML-TR-70- 11, mmP Project No. 721-8, Metcut Research Associates Inc., Cincinnati (Ohio), March, 1970. Kramer, B.M. Tribilogical Aspects of Metal Cutting. Proc. of ASME, PED-Vol.54/TRIB-Vol.2, 1991. Kumar, S. and Hoeer, B. Simulated Action [FEA Model- ling of Machining]. Cutting Tool Engg., 44–49, March, 1999. Lamb, A.D. Some Aspects of the Character of Machined Sur- faces. Metals and Matls., 75–79, March, 1987. Lee, E.H. and Shaer, B.W. e eory of Plasticity Applied to a Problem of Machining. J. Appl. Mech., Vol. 18 (4), 405, 1951. Lombardi, G.G. Kinematics and Dynamics. [Internet ad- dress can be found as follows]: www.drphyscis.com/syl- labus/kinematics/kinematcis.htl Lorenz, G. Measurement of Machinability … A Survey of Testing Methods. IAAE Journal 70–81, June 1966. Marusich, T.D. and Ortiz, M. Modeling and Simulation of High-speed Machining. Int. J. Num. Met. Eng’g., Vol. 38, 3675–3694, 1995. Mechant, M.E. Mechanics of the Metal Cutting Process. J. Appl. Phys., Vol. 16 (5), 267 (a), (6) 318 and 324(b), 1945. Merchant, M.E. and Zlatin, N. In: Mech. Eng’g., Vol. 67, 737, 1945. Obikawa, T., Sasahara, H., Shirakashi, T. and Usui, E. Ap- plication of Computational Machining Method to Dis- continuous Chip Formation. J. of Manufact. Science and Engg., Vol. 119, 667–674, 1997. Pahitzsch, G. and Semmler, D. Z. fur wirtschalich Ferti- gung. In: Vol. 55, 242, 1960; Vol. 56, 148, 1961; and Vol. 57, 45, 1962. Painter, P.R., Smith, G.T. and Hope, A.D. Performance Eval- uation of a Machining Centre using Laser Interferometry and Artifact-based Techniques. Proc. of FAIM’96, CRC Press, Inc. (NY), 962–974, 1992. Pawar, K., Forrester, P. and Glazzard, J. Value Analysis: Inte- grating Product/Process Design. Integrated Manuf. Sys- tems, Vol. 4(3), 14–21, 1993. Pekelharing, A.J. and Hovinga, H.J. Wear at the End Cut- ting Edge of Carbide Tools in Finish and Rough Turning. Proc. of 8 th Mach. Tool Des. Res. Conf., 6430651, Sept. 1967. Pekelharing, A.J. Built-up Edge (BUE): Is the Mechanism Understood? Annals of the CIRP, Vol. 23(3), 207–211, 1974. Pontius, K. Split Personality [Machining Dissimilar Metals]. Cutting Tool Engg., 41–43, Feb., 2002. Pugh, H.D. Mechanics of the Cutting Process. Proc. of IME Conf. Tech. Eng’g. Manufact. (London), 237, 1958. Rakhit, A.k., Sankar, T.S. and Osman, M.O.M. e Inu- ence of Metal Cutting Forces on the Formation of Surface Texture in Turning. Int. J. of Mach. Tool Des. Res., Vol. 16, 281–292, 1976. Shainin, D. Better than Taguchi Orthogonal Tables. ANSQC Quality Congress Trans., Anaheim, USA, concerning: e Fundamentals and Future of Quality, 446–451, 1986. Shiraishi, M. and Sato, S. Dimensional and Surface Rough- ness controls in a Turning Operation. Trans. of ASME, Vol. 112, 78–83, 1990. Smith, G.T. Surface Integrity Aspects of Machinability of Fe- C-Cu Powder Metallurgy Components. Powder Metal- lurgy, Vol. 33(2), 157–164, 1990. Smith, G.T. e Surface Integrity of Turned Ferrous Powder Metallurgy Components. Powder Metallurgy, Vol. 33(2), 155–165, 1990. Smith, G.T. Secondary Machining Operations and the Re- sulting Surface Integrity: An Overview. Surface Topogra- phy, Vol. 3, 25–42, 1990. Smith, G.T. Some Aspects in the Surface Integrity and Tool Wear Associated with Turning Powder Metallurgy Com- pacts. WEAR, Vol. 151, 289–302, 1991. Smith, G.T., Hope, A.D., Painter, P.R. and Blackshaw, D.M.S. e Assessment of Machining and Turning Centres, using Artifact-based Techniques. Proc. of Lamdamap I, Com- putational Mechanics, 275–286, 1993. Smith, G.T. What is Machinability and How Can it be As- sessed? Int. Conf. on Industrial Tooling, Shirley Press (Southampton, UK), 105–114, Sept. 1995. Smith. G.T. Inspection of Components Manufactured on a Machining Centre, by On- and O-line Techniques. Proc. of FAIM’96, Begell House, Inc. (NY), 216–224, 1996. Smith, G.T. Ternary Manufacturing Envelopes (TME’s): A New Approach to Describing Machined Surfaces. Int. J. of Mach. Tools and Manufact., Vol. 40(2), 295–305, 2000. Smith, G.T. Fight to the Finish [Tool Geometry and its Af- fect on both: Roundness/Surface Texture]. Metalwork- ing Production, 49–52, June, 2001. Spur, G., Pöllmann, A. and Kirchheim, A. Kombi-Sensorik beim Scherschneiden, Zeitschri für wirtschaliche Ferti- gung und Automatisierung. In: Zwf, Vol. 90, 1–2, 1995. Stefanov, Y.P., Makarov, P.V., Burkov, P.V. and Matveev, V.S. Dynamic Simulation of Chip Generation and Formation in Metal Cutting. eoret. and Appl. Fracture Mechan- ics, Vol. 28, 117–124, 1997. Stout, K., How Smooth is Smooth? Surface Measurements and their Relevance in Manufacturing. Production Engr., 17–22, May 1980. Machinability and Surface Integrity 377 Strenkowski, J.S, and Athavele, S.M. A Partially Constrained Eulerian Orthogonal Cutting Model for Chip Control Tools. J. of Manuf. Science, Vol. 119, 681–688, 1997. Tay, A.A.O. A Review of Methods of Calculating Machin- ing Temperature. J. of Matls. Processing Tech., Vol. 36, 225–257, 1993. Taylor, F.W. On the Art of Cutting Metals. Trans. of ASME, Vol. 28, 31, 1907. omsen, E.G., Application of the Mechanics of Plastic De- formation to Metal Cutting. Annals of the CIRP, Vol. 14, 113–123, 1966. Tlusty, J. and Polacek, M., e Stability of Machine Tool against Self-excited Vibrations in Machining. ASME Prod. Res. Conf. (Pittsburgh), 454–465, 1963. Tönsho, H.K. Eigenspannungen und plastische Verformun- gen im Werkstück durch spanned Bearbeitung. Dr Ing. Dissertation, TH Hannover, 1965. Turley, D.M., Doyle, E.D. and Samuels, L.E. A Structure of the Damaged Layer on Metals. Proc. of the Int. Conf. on Prod. Engg., Tokyo, Japanese Society of Prec. Engrs.: Part 2, 1974. Vajpayee, S. Analytical Study os Surface Roughness in Turn- ing. WEAR, Vol. 70, 165–175, 1981. Wallace, P.W. and Boothroyd, G. Tool Forces and Tool-chip Friction in Orthogonal Machining. J. Mech. Eng’g. Sci., Vol. 6 (1), 74, 1964. Watson, D.W. and Murphy, M.C. e Eect of Machining on Surface Integrity. e Metallurgist and Matls. Technol., 199–204, April, 1979. Wells, J. Material Matters [Optimisation of Workpiece Matls]. Cutting Tool Engg., 58–64, June 2005. Williams, J.E., Smart, E.F. and Milner, D.R. e Metallurgy of Machining, Part 1: Basic Considerations and the Cut- ting of Pure Metals. Metallurgia, 3–10, Jan., 1970. Williams, J.E., Smart, E.F. and Milner, D.R. e Metallurgy of Machining, Part 2: e Cutting of Single-phase, Two- phase and some Free Machining Alloys. Metallurgia, 51–59, Feb., 1970. Whitehouse, D.J. Beta Functions for Surface Topologie? An- nals of the CIRP, Vol. 27, 491–497, 1978. Whitehouse, D.J. Conditioning of the Manufacturing Process using Surface Finish. Proc. of Lamdamap III, Computa- tional Mechanics, 3–20, 1997. Whitehouse, D.J. Surface Measurement Fidelity. Proc. of Lamdamap IV, WIT Press, 267–276, 1999. Young, H.T. An Experimental Investigation of Temperatures in Chip Formation. Proc. of 29 th Int. Matador Conf. (Manchester), e Macmillan Press Ltd., 559–565, April 1992. Zorev, N.N. Interrelation between Shear Processes Occurring along Tool Face and on Shear Plane in Metal Cutting. Int. Res. in Prod. Eng’g., 42, 1963 (Presented at Int. Prod. Eng’g. Res. Conf., Pittsburgh, 1963). Books, Booklets and Guides Akao, Y. Quality Function Deployment (QFD) – Integrating Customer Requirements into Product Design. Productiv- ity Press (Portland, Oregon), 1988. American National Standard (ANS) B211.1 – Surface In- tegrity. 1986. Amontons, G. Histoire de l’Académie Royale des Sciences avec les Mémoires de Mathématique et de Physique. Paris, 1699. Armarego, E.J.A. and Brown, R.H. e Machining of Metals. Prentice-Hall Pub., 1969. Avner, S.H. Introduction to Physical Metallurgy (2 nd Ed.). McGraw-Hill Int. Book Co., 1974. Arvill, J. Mechanical Engineer’s Data Handbook. Butter- worth-Heinemann, 1997. Bajpai, A.C., Calus, I.M. and Fairly, J.A. Statistical Methods for Engineers and Scientists. John Wiley Pub., 1979. Bedford, a. and Fowler, W. Engineering Mechanics – Statics and Dynamics (3 rd Ed.). Prentice-Hall, Inc., 2002. Bell, S. A Beginner’s Guide to Uncertainty of Measurement – Measurement Good Practice Guide. NPL Pub. No. 11, Aug. 1999. Bhattacharyya, G.K. and Johnson, R.A. Statistical Concepts and Methods. John Wiley Pub., 1977. Birch, K. Estimating Uncertainties in Testing – Measurement Good Practice Guide. NPL Pub. No. 36, March 2001. Bird, J. Engineering Mathematics. Newnes – Elsevier Sci- ence Pub., 2003. Boulger, F.W. Machining – eory and Practice. ASM (Cleveland, OH), 1950. Boothroyd, G. Fundamentals of Metal Machining and Ma- chine Tools. McGraw-Hill, New York, 1975. Bowman, K. Mechanical Behavior of Materials. John Wiley & Sons, Inc., 2004. Bowden, F.P. and Tabor, D. Frictionand Lubrication of Sol- ids. Oxford University Press (London), 1954. Brammertz, P.H. Ursachen für Form und Massfehler an Fein- bearbeiten Werkstüchken. Dissertation (T.H. Achen), 1960. Carvil, J. Mechanical Engineer’s Data Handbook. Butter- worth-Heinemann, 1994. Childs, T.H.C., Maekawa, K., Obikawa, T. and Yamane, Y. Metal Machining – eory and Applications. Arnold Pub., 2000. Collett, C.V. and Hope, A.D. Engineering Measurements. Pitman Pub. Ltd., 1979. Coullomb, C.A. Mémoires de Mathématique et de Physique de l’Académie Royale des Sciences. Paris, 1785. Cross, N. Engineering Design Methods – Strategies for Prod- uct Design (3 rd Ed.). John Wiley & Sons Ltd., Nov. 2003. 378 Chapter 7 Cutting Tool Materials. American Soc. of Metals (OH), 1981. Dagnall, H. Let’s Talk Roundness. Taylor Hobson Ltd. Pub., Nov. 1996. Dagnall, H. Exploring Surface Texture (3 rd Ed.). Taylor Hob- son Ltd. Pub., March 1998. Degarmo, E.P, Black, J.T and Kosher, R.A. Materials and Processes in Manufacturing (9 th Ed.). John Wiley & Sons, Inc., 2003. Dowson, G. Powder Metallurgy – e Process and its Prod- ucts. Adam Hilger – IOP Pub. Ltd., 1990. Ernst, H. Physics of Metal Cutting. ASM (Cleveland, OH), 1938. Griths, B. Manufacturing Surface Technology – Surface In- tegrity and Functional Performance. Penton Press, 2001. Höganäs AB Pub. Machining Guidelines – Book 5. Sept., 1998. Higgins, R.A. Properties of Engineering Materials. Hodder and Stoughton Educ., 1979. Inuence of Metallurgy on Hole Making Operations. Ameri- can Soc. of Metals (Ohio), 1978. Inuence of Metallurgy on Machinability. American Soc. of Metals (Ohio), 1975. Preliminary Study of Variations in Machinability of Carbon Steel. PERA Pub. No. 179, April 1968. Kaczmarek, J. Principles of Machining by Cutting, Abrasion and Erosion. Peter Peregrinus Pub. (Warsaw, Poland), 1976. Kalpakjian, S. Manufacturing Processes for Engineering Ma- terials (3 rd Ed.). Addison Wesley Longman, Inc., 1997. Komanduri, R. Symposium on US Contributors to Machin- ing and Grinding Research in the 20 th Century. American Soc. for Mech. Engrs.: Applied Mechanics Reviews, Vol. 46(3), March 1993. Kronenberg, M. Machining Science and Application. Per- gamon Press (NY/London), 1966. Kruszynski, B.W. and Cuttervelt, C.W. Plastic Deformation in the Surface Layer aer Cutting. Advanced Manufac- turing Engineering, Vol. 1, 1989. Mills, B. and Redford, A.H. Machinability of Engineering Materials. Applied Science Pub., 1983. Modern Metal Cutting – Part 12: Machining Economics. Sandvik Coromant Pub., 1981. Mummery, L. Surface Texture Analysis – e Handbook. Hommelwerke GmbH Pub., 1990. Ramsey, D.C. Engineering Instrumentation and Control. Stanley ornes Pub. Ltd., 1981. Reason, R.E. e Measurement of Surface Texture. Cleaver- Hume Press Lt., 1960. Roller Burnishing, Sandvik Coromant Pub., No.: HV-5300:012-ENG. Rowe, G.W. An Introduction to the Principles of Metalwork- ing. Edward Arnold (Pub.) Ltd, 1968. Sander, M. A Practical Guide to the Assessment of Surface Texture. Feinprüf GmbH Pub. (Göttingen), 1991. Sandvik Coromant Pub. e Cutting Process. No.: CMSP 900–038 ENG, 1989. Schaer, J.P, Saxena, A., Antlovich, S.D., Sanders, Jr., T.H. and Warner, S.B. e Science of Engineering Materials (2 nd Ed.). McGraw-Hill Comp. Inc., 1999. Shaw, M.C. and Cook, N.H. Metal Cutting Principles. MIT Pub. 3 rd Ed., Chapter 4, 1954. Shaw, M.C. Metal Cutting Principles. Clarendon Press (Ox- ford), 1984. Smith, G.T. Advanced Machining – e Handbook of Cut- ting Technology, IFS Pub./Springer Verlag, 1989. Smith G.T. CNC Machining Technology, Springer Verlag, 1993. Smith, G.T. Industrial Metrology – Surfaces and Roundness. Springer Verlag, 2002. Sokolowski, A.P. Prazision in der Metallbearbeitung. VEB Verlag Technik, Berlin, 1955. Stout, K. Quality Control in Automation. Kogan Page Ltd., 1985. Surface Technology – Wear Protection. Verlag Moderne In- dustrie AG & Co., 1990. Swanson, R.C. Quality Improvement Handbook – Team Guide to Tools and Techniques. Kogan Page Ltd., 1995. omas, T.R. Rough Surfaces (2 nd Ed.). Imperial College Press, 1999. Trent. E.M. Metal Cutting (2 nd Ed.). Butterworths & Co (Pub.) Ltd., 1984. Taguchi, G., Experimental Designs (3 rd Ed.). Vol. 1, Maru- zen Pub., 1976. Valentino, J.V. and Goldenberg, J. Introduction to Computer Numerical Control (CNC) (2 nd Ed.). Prentice Hall Int., 2000. Vickerman, J.C. Surface Analysis – e Principal Tech- niques. John Wiley and Sons Ltd., 2000. Vieregge, G. Zerspanung der Eisenwerkstoe [Machining of Ferrous Metals], Vol. 16 of Stahleisenbücher [Iron and Steel Series – 2 nd Ed.], Verlag Stahliesen (Düsseldorf, 1970. Whitehouse, D. Surfaces and their Measurement. Hermes Penton Science., 2002. Zorev, N.N. Metal Cutting Mechanics. Pergamon Press (Oxfrod), 1966. Machinability and Surface Integrity 379 . As- sessed? Int. Conf. on Industrial Tooling, Shirley Press (Southampton, UK), 105–114, Sept. 1995. Smith. G.T. Inspection of Components Manufactured on a Machining Centre, by On- and O-line. American Soc. of Metals (Ohio), 1975. Preliminary Study of Variations in Machinability of Carbon Steel. PERA Pub. No. 179, April 1968. Kaczmarek, J. Principles of Machining by Cutting, Abrasion and. Surface Rough- ness controls in a Turning Operation. Trans. of ASME, Vol. 112, 78–83, 1990. Smith, G.T. Surface Integrity Aspects of Machinability of Fe- C-Cu Powder Metallurgy Components. Powder