Tài liệu hướng dẫn sửa chữa xe Nissan x trail t32 esm huong dan sua chua phan 3 . Cung cấp các thông tin cần thiết cho kỹ thuật viên tiến hành chẩn đoán, sửa chữa nhanh chóng, chính xác, hiệu quả, hợp lý
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY SECTION DLK DOOR & LOCK A B C D CONTENTS TYPE COMPONENT PARTS 29 HOW TO USE THIS MANUAL 22 DOOR LOCK SYSTEM 29 DOOR LOCK SYSTEM : Component Parts Location 29 DOOR LOCK SYSTEM : Automatic Back Door Close Switch 32 DOOR LOCK SYSTEM : Automatic Back Door Control Unit 32 DOOR LOCK SYSTEM : Automatic Back Door Main Switch .32 DOOR LOCK SYSTEM : Automatic Back Door Switch 33 DOOR LOCK SYSTEM : Automatic Back Door Warning Buzzer .33 DOOR LOCK SYSTEM : Back Door Lock Assembly 34 DOOR LOCK SYSTEM : Back Door Opener Switch Assembly .34 DOOR LOCK SYSTEM : Door Lock Assembly .35 DOOR LOCK SYSTEM : Door Lock and Unlock Switch 35 DOOR LOCK SYSTEM : Door Request Switch 35 DOOR LOCK SYSTEM : Door Switch .36 DOOR LOCK SYSTEM : Hands Free Sensor 36 DOOR LOCK SYSTEM : Inside Key Antenna 37 DOOR LOCK SYSTEM : Intelligent Key Warning Buzzer .37 DOOR LOCK SYSTEM : Outside Key Antenna 37 DOOR LOCK SYSTEM : Spindle Unit .38 DOOR LOCK SYSTEM : Touch Sensor 38 APPLICATION NOTICE .22 Information 22 PRECAUTION 23 PRECAUTIONS 23 EXCEPT FOR MEXICO AND LATIN AMERICA 23 EXCEPT FOR MEXICO AND LATIN AMERICA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" 23 EXCEPT FOR MEXICO AND LATIN AMERICA : Precaution Necessary for Steering Wheel Rotation After Battery Disconnect 23 EXCEPT FOR MEXICO AND LATIN AMERICA : Precaution for Procedure without Cowl Top Cover 24 EXCEPT FOR MEXICO AND LATIN AMERICA : Precautions for Removing Battery Terminal 24 EXCEPT FOR MEXICO AND LATIN AMERICA : Work 25 FOR MEXICO AND LATIN AMERICA 25 FOR MEXICO AND LATIN AMERICA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" 25 FOR MEXICO AND LATIN AMERICA : Precaution for Procedure without Cowl Top Cover 25 FOR MEXICO AND LATIN AMERICA : Precautions for Removing Battery Terminal 26 FOR MEXICO AND LATIN AMERICA : Work 27 PREPARATION 28 PREPARATION 28 Special Service Tools 28 SYSTEM DESCRIPTION 29 E F G H I J DLK L M N O SYSTEM (POWER DOOR LOCK SYSTEM) 39 System Description 39 Circuit Diagram 41 SYSTEM (INTELLIGENT KEY SYSTEM) 43 INTELLIGENT KEY SYSTEM 43 INTELLIGENT KEY SYSTEM : System Description 43 DLK-1 P INTELLIGENT KEY SYSTEM : Circuit Diagram 45 DOOR LOCK FUNCTION 48 DOOR LOCK FUNCTION : System Description 49 BACK DOOR OPEN FUNCTION 52 BACK DOOR OPEN FUNCTION : System Description 52 REMOTE KEYLESS ENTRY FUNCTION 53 REMOTE KEYLESS ENTRY FUNCTION : System Description 53 KEY REMINDER FUNCTION 55 KEY REMINDER FUNCTION : System Description 56 INFORMATION DISPLAY (COMBINATION METER) 56 INFORMATION DISPLAY (COMBINATION METER) : Door Open Warning 56 INFORMATION DISPLAY (COMBINATION METER) : Engine Start Information 57 INFORMATION DISPLAY (COMBINATION METER) : Intelligent Key Low Battery Warning 59 INFORMATION DISPLAY (COMBINATION METER) : Intelligent Key System Malfunction 60 INFORMATION DISPLAY (COMBINATION METER) : Key ID Verification Information 62 INFORMATION DISPLAY (COMBINATION METER) : Key ID Warning 63 INFORMATION DISPLAY (COMBINATION METER) : P Position Warning (Information Display) 64 INFORMATION DISPLAY (COMBINATION METER) : Steering Lock Information 65 INFORMATION DISPLAY (COMBINATION METER) : Take Away Warning (Information Display) 66 WARNING/INDICATOR/CHIME LIST 67 WARNING/INDICATOR/CHIME LIST : Warning Lamp/Indicator (Information Display) 67 WARNING/INDICATOR/CHIME LIST : Warning Chime 68 SYSTEM (BACK DOOR OPENER SYSTEM) 69 DOOR LOCK : CONSULT Function (BCM DOOR LOCK) (Except for South Africa and General Areas With Intelligent Key System) 85 INTELLIGENT KEY 86 INTELLIGENT KEY : CONSULT Function (BCM INTELLIGENT KEY) (Except for South Africa and General Areas With Intelligent Key System) 86 TRUNK 91 TRUNK : CONSULT Function (BCM - TRUNK) (Except for South Africa and General Areas With Intelligent Key System) 91 DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT) 93 CONSULT Function (AUTOMATIC BACK DOOR CONTROL UNIT) 93 ECU DIAGNOSIS INFORMATION 95 BCM 95 List of ECU Reference 95 AUTOMATIC BACK DOOR CONTROL UNIT 96 Reference Value 96 Fail-safe 100 DTC Inspection Priority Chart 101 DTC Index 101 WIRING DIAGRAM 103 DOOR & LOCK SYSTEM 103 Wiring Diagram 103 AUTOMATIC BACK DOOR SYSTEM 130 Wiring Diagram 130 BASIC INSPECTION 139 DIAGNOSIS AND REPAIR WORK FLOW 139 Work Flow 139 ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL 142 Description 142 Work Procedure 142 System Description 69 Circuit Diagram 70 ADDITIONAL SERVICE WHEN REPLACING AUTOMATIC BACK DOOR CONTROL UNIT 143 SYSTEM (AUTOMATIC BACK DOOR SYSTEM) 71 Description 143 Work Procedure 143 System Description 71 Circuit Diagram 82 CALIBRATION OF AUTOMATIC BACK DOOR POSITION INFORMATION 144 DIAGNOSIS SYSTEM (BCM) 84 Description 144 Work Procedure 144 COMMON ITEM 84 COMMON ITEM : CONSULT Function (BCM COMMON ITEM) 84 DTC/CIRCUIT DIAGNOSIS 145 DOOR LOCK 85 DTC Description 145 B2401 IGNITION POWER SUPPLY CIRCUIT 145 DLK-2 Diagnosis Procedure 145 U1000 CAN COMM CIRCUIT 183 B2409 HALF LATCH SWITCH 147 DTC Description 183 Diagnosis Procedure 183 DTC Description 147 Diagnosis Procedure 147 U1010 CONTROL UNIT (CAN) 184 B2416 TOUCH SENSOR RH 150 DTC Description 184 Diagnosis Procedure 184 DTC Description 150 Diagnosis Procedure 150 Component Inspection 152 B2417 TOUCH SENSOR LH 153 DTC Description 153 Diagnosis Procedure 153 Component Inspection 155 B2419 OPEN SWITCH 156 DTC Description 156 Diagnosis Procedure 156 B2420 CLOSE SWITCH 159 DTC Description 159 Diagnosis Procedure 159 B2422 BACK DOOR STATE 161 DTC Description 161 Diagnosis Procedure 161 B2423 AUTOMATIC BACK DOOR MOTOR OPERATION TIME 164 DTC Description 164 Diagnosis Procedure 164 B2426 ENCODER 166 DTC Description 166 Diagnosis Procedure 166 B2427 ENCODER 169 DTC Description 169 Diagnosis Procedure 169 B2428 AUTOMATIC BACK DOOR CONTROL UNIT 172 DTC Description 172 Diagnosis Procedure 172 B242A CLOSURE CONDITION 173 DTC Description 173 Diagnosis Procedure 173 B242B HANDS FREE DETECT SENSOR 176 DTC Description 176 Diagnosis Procedure 176 B2621 INSIDE ANTENNA 177 DTC Description 177 Diagnosis Procedure 177 B2622 INSIDE ANTENNA 180 DTC Description 180 Diagnosis Procedure 180 A B AUTOMATIC BACK DOOR CLOSE SWITCH 185 C Component Function Check 185 Diagnosis Procedure 185 Component Inspection 186 D AUTOMATIC BACK DOOR SWITCH 187 Component Function Check 187 Diagnosis Procedure 187 Component Inspection 188 AUTOMATIC DOOR MAIN SWITCH 189 Component Function Check 189 Diagnosis Procedure 189 Component Inspection 190 E F G AUTOMATIC BACK DOOR WARNING BUZZER 191 Diagnosis Procedure 191 Component Inspection 191 H BACK DOOR CLOSURE MOTOR 193 Diagnosis Procedure 193 I BACK DOOR SWITCH 194 WITHOUT AUTOMATIC BACK DOOR 194 WITHOUT AUTOMATIC BACK DOOR : Component Function Check 194 WITHOUT AUTOMATIC BACK DOOR : Diagnosis Procedure 194 WITHOUT AUTOMATIC BACK DOOR : Component Inspection 195 WITH AUTOMATIC BACK DOOR 195 WITH AUTOMATIC BACK DOOR : Component Function Check 195 WITH AUTOMATIC BACK DOOR : Diagnosis Procedure 195 WITH AUTOMATIC BACK DOOR : Component Inspection 196 J DLK L M N BACK DOOR OPENER ACTUATOR 198 Diagnosis Procedure 198 O BACK DOOR OPENER SWITCH 199 Component Function Check 199 Diagnosis Procedure 199 Component Inspection 200 BACK DOOR REQUEST SWITCH 201 Description 201 Component Function Check 201 Diagnosis Procedure 201 Component Inspection 202 DLK-3 P CLOSE SWITCH 203 INTELLIGENT KEY BATTERY 228 Component Function Check 203 Diagnosis Procedure .203 Component Inspection 228 COMBINATION METER BUZZER 205 Component Function Check 205 Diagnosis Procedure .205 DOOR LOCK ACTUATOR 206 DRIVER SIDE 206 DRIVER SIDE : Component Function Check .206 DRIVER SIDE : Diagnosis Procedure 206 PASSENGER SIDE 207 PASSENGER SIDE : Component Function Check 207 PASSENGER SIDE : Diagnosis Procedure 207 REAR LH 209 REAR LH : Component Function Check 209 REAR LH : Diagnosis Procedure 209 INTELLIGENT KEY WARNING BUZZER 229 Component Function Check 229 Diagnosis Procedure 229 OPEN SWITCH 231 Component Function Check 231 Diagnosis Procedure 231 OUTSIDE KEY ANTENNA 233 DRIVER SIDE 233 DRIVER SIDE : Diagnosis Procedure 233 PASSENGER SIDE 235 PASSENGER SIDE : Diagnosis Procedure 235 REAR BUMPER 238 REAR BUMPER : Diagnosis Procedure 238 POWER SUPPLY AND GROUND CIRCUIT 241 REAR RH 210 REAR RH : Component Function Check .210 REAR RH : Diagnosis Procedure 210 FRONT DOOR LOCK 241 FRONT DOOR LOCK : Diagnosis Procedure 241 DOOR LOCK AND UNLOCK SWITCH 213 REAR DOOR LOCK 241 REAR DOOR LOCK : Diagnosis Procedure 241 DRIVER SIDE 213 DRIVER SIDE : Component Function Check .213 DRIVER SIDE : Diagnosis Procedure 213 PASSENGER SIDE 214 PASSENGER SIDE : Component Function Check 214 PASSENGER SIDE : Diagnosis Procedure 214 DOOR REQUEST SWITCH 216 Component Function Check 216 Diagnosis Procedure .216 Component Inspection 217 DOOR SWITCH 219 Component Function Check 219 Diagnosis Procedure .219 Component Inspection 220 HALF LATCH SWITCH 221 Component Function Check 221 Diagnosis Procedure .221 HANDS FREE SENSOR 223 Component Function Check 223 Diagnosis Procedure .223 HAZARD FUNCTION 226 Component Function Check 226 Diagnosis Procedure .226 INFORMATION DISPLAY 227 Component Function Check 227 Diagnosis Procedure .227 AUTOMATIC BACK DOOR CONTROL UNIT 242 AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure 242 TOUCH SENSOR 244 RH 244 RH : Component Function Check 244 RH : Diagnosis Procedure 244 RH : Component Inspection 245 LH 245 LH : Component Function Check 245 LH : Diagnosis Procedure 246 LH : Component Inspection 247 SPINDLE MOTOR 248 RH 248 RH : Diagnosis Procedure 248 LH 249 LH : Diagnosis Procedure 249 UNLOCK SENSOR 251 Diagnosis Procedure 251 Component Inspection 252 SYMPTOM DIAGNOSIS 253 AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE 253 ALL SWITCHES 253 DLK-4 ALL SWITCHES : Description 253 ALL SWITCHES : Diagnosis Procedure 253 AUTOMATIC BACK DOOR SWITCH 254 AUTOMATIC BACK DOOR SWITCH : Description 254 AUTOMATIC BACK DOOR SWITCH : Diagnosis Procedure 254 AUTOMATIC BACK DOOR CLOSE SWITCH 254 AUTOMATIC BACK DOOR CLOSE SWITCH : Description 254 AUTOMATIC BACK DOOR CLOSE SWITCH : Diagnosis Procedure 254 INTELLIGENT KEY 254 INTELLIGENT KEY : Description 255 INTELLIGENT KEY : Diagnosis Procedure 255 BACK DOOR OPENER SWITCH 255 BACK DOOR OPENER SWITCH : Description 255 BACK DOOR OPENER SWITCH : Diagnosis Procedure 255 AUTOMATIC BACK DOOR HANDS FREE FUNCTION DOES NOT OPERATE 257 CLOSURE FUNCTION : Diagnosis Procedure 263 DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH 264 ALL DOOR 264 ALL DOOR : Description 264 ALL DOOR : Diagnosis Procedure 264 FRONT DOOR 264 FRONT DOOR : Description 264 FRONT DOOR : Diagnosis Procedure 264 A B C D REAR DOOR 265 REAR DOOR : Description 265 REAR DOOR : Diagnosis Procedure 265 E DRIVER SIDE 265 DRIVER SIDE : Description 265 DRIVER SIDE : Diagnosis Procedure 265 F PASSENGER SIDE 265 PASSENGER SIDE : Description 266 PASSENGER SIDE : Diagnosis Procedure 266 G REAR LH 266 REAR LH : Description 266 REAR LH : Diagnosis Procedure 266 H REAR RH 266 REAR RH : Description 266 REAR RH : Diagnosis Procedure 266 I DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH 268 J HAZARD WARNING LAMP 258 HAZARD WARNING LAMP : Description 258 HAZARD WARNING LAMP : Diagnosis Procedure 258 ALL DOOR REQUEST SWITCHES 268 ALL DOOR REQUEST SWITCHES : Description 268 ALL DOOR REQUEST SWITCHES : Diagnosis Procedure 268 DLK AUTOMATIC BACK DOOR FUNCTIONS DO NOT CANCEL 259 DRIVER SIDE DOOR REQUEST SWITCH 268 DRIVER SIDE DOOR REQUEST SWITCH : Description 269 DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure 269 Diagnosis Procedure 257 AUTOMATIC BACK DOOR WARNING DOES NOT OPERATE 258 BUZZER 258 BUZZER : Description 258 BUZZER : Diagnosis Procedure 258 Diagnosis Procedure 259 AUTOMATIC BACK DOOR ANTI-PINCH FUNCTION DOES NOT OPERATE 260 Diagnosis Procedure 260 Diagnosis Procedure 261 PASSENGER SIDE DOOR REQUEST SWITCH 269 PASSENGER SIDE DOOR REQUEST SWITCH : Description 269 PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure 269 BACK DOOR AUTO CLOSURE FUNCTION DOES NOT OPERATE 262 DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY 270 AUTO DOOR LOCK OPERATION DOES NOT OPERATE 261 Diagnosis Procedure 270 OPEN/CLOSURE FUNCTION 262 OPEN/CLOSURE FUNCTION : Description 262 OPEN/CLOSURE FUNCTION : Diagnosis Procedure 262 DOOR LOCK OPERATION WARNING DOES NOT OPERATE 272 CLOSURE FUNCTION 263 CLOSURE FUNCTION : Description 263 INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE 273 Diagnosis Procedure 272 DLK-5 L M N O P Diagnosis Procedure .273 Exploded View 293 IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE 274 HOOD ASSEMBLY 293 HOOD ASSEMBLY : Removal and Installation 293 HOOD ASSEMBLY : Inspection 294 HOOD ASSEMBLY : Adjustment 294 Diagnosis Procedure .274 IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE 275 Diagnosis Procedure .275 KEY ID WARNING DOES NOT OPERATE 276 Diagnosis Procedure .276 KEY REMINDER FUNCTION DOES NOT OPERATE 277 HOOD HINGE 296 HOOD HINGE : Removal and Installation 297 HOOD SUPPORT ROD 297 HOOD SUPPORT ROD : Removal and Installation 297 Diagnosis Procedure .277 RADIATOR CORE SEAL 297 RADIATOR CORE SEAL : Removal and Installation 297 OFF POSITION WARNING DOES NOT OPERATE 278 HOOD INSULATOR 298 HOOD INSULATOR : Removal and Installation 298 Diagnosis Procedure .278 P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPERATE 279 Diagnosis Procedure .279 P POSITION WARNING DOES NOT OPERATE 280 Diagnosis Procedure .280 REMINDER FUNCTION DOES NOT OPERATE 281 DOOR REQUEST SWITCH .281 DOOR REQUEST SWITCH : Description .281 DOOR REQUEST SWITCH : Diagnosis Procedure .281 INTELLIGENT KEY 282 INTELLIGENT KEY : Description 282 INTELLIGENT KEY : Diagnosis Procedure 282 SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE 284 RADIATOR CORE SUPPORT 299 MR20DD 299 MR20DD : Exploded View 299 MR20DD : Removal and Installation 300 QR25DE 301 QR25DE : Exploded View 302 QR25DE : Removal and Installation 303 R9M 304 R9M : Exploded View 305 R9M : Removal and Installation 305 FRONT FENDER 308 Exploded View 308 FRONT FENDER 308 FRONT FENDER : Removal and Installation 308 FENDER COVER 309 FENDER COVER : Removal and Installation 309 FRONT DOOR 310 Diagnosis Procedure .284 Exploded View 310 TAKE AWAY WARNING DOES NOT OPERATE 285 DOOR ASSEMBLY 311 DOOR ASSEMBLY : Removal and Installation 311 DOOR ASSEMBLY : Inspection 312 DOOR ASSEMBLY : Adjustment 312 Diagnosis Procedure .285 VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE 286 Diagnosis Procedure .286 DOOR STRIKER 314 DOOR STRIKER : Removal and Installation 314 SQUEAK AND RATTLE TROUBLE DIAGNOSES 287 DOOR HINGE 314 DOOR HINGE : Removal and Installation 314 Work Flow 287 Inspection Procedure .289 Diagnostic Worksheet 291 DOOR CHECK LINK 315 DOOR CHECK LINK : Removal and Installation 315 REMOVAL AND INSTALLATION 293 DOOR WEATHER-STRIP 315 DOOR WEATHER-STRIP : Removal and Installation 315 HOOD 293 DLK-6 REAR DOOR 318 FRONT DOOR LOCK 341 Exploded View 318 Exploded View 341 A DOOR ASSEMBLY 319 DOOR ASSEMBLY : Removal and Installation 319 DOOR ASSEMBLY : Inspection 320 DOOR ASSEMBLY : Adjustment 320 DOOR LOCK 341 DOOR LOCK : Removal and Installation 341 DOOR LOCK : Inspection 342 B INSIDE HANDLE 342 INSIDE HANDLE : Removal and Installation 342 C DOOR STRIKER 322 DOOR STRIKER : Removal and Installation 322 DOOR HINGE 322 DOOR HINGE : Removal and Installation 322 DOOR CHECK LINK 323 DOOR CHECK LINK : Removal and Installation 323 DOOR WEATHER-STRIP 323 DOOR WEATHER-STRIP : Removal and Installation 323 BACK DOOR 326 Exploded View 326 BACK DOOR ASSEMBLY 326 BACK DOOR ASSEMBLY : Removal and Installation 326 BACK DOOR ASSEMBLY : Inspection 328 BACK DOOR ASSEMBLY : Adjustment 329 OUTSIDE HANDLE 343 OUTSIDE HANDLE : Removal and Installation 343 REAR DOOR LOCK 346 D Exploded View 346 DOOR LOCK 346 DOOR LOCK : Removal and Installation 346 DOOR LOCK : Inspection 347 INSIDE HANDLE 347 INSIDE HANDLE : Removal and Installation 347 OUTSIDE HANDLE 347 OUTSIDE HANDLE : Removal and Installation 348 BACK DOOR LOCK 350 E F G Exploded View 350 H BACK DOOR STRIKER 331 BACK DOOR STRIKER : Removal and Installation 331 DOOR LOCK 351 DOOR LOCK : Removal and Installation 351 DOOR LOCK : Inspection 352 DOOR LOCK : Unlock procedures 352 I BACK DOOR HINGE 331 BACK DOOR HINGE : Removal and Installation 331 SPINDLE UNIT 353 SPINDLE UNIT : Removal and Installation 353 BACK DOOR STAY 331 BACK DOOR STAY : Removal and Installation 332 BACK DOOR STAY : Disposal 332 TOUCH SENSOR 354 TOUCH SENSOR : Removal and Installation 354 BACK DOOR WEATHER-STRIP 332 BACK DOOR WEATHER-STRIP : Removal and Installation 333 Exploded View 356 HOOD LOCK 334 Exploded View 334 HOOD LOCK 335 HOOD LOCK : Removal and Installation 335 HOOD LOCK : Inspection 336 HOOD LOCK CONTROL HANDLE 338 HOOD LOCK CONTROL HANDLE : Removal and Installation 338 HOOD LOCK CONTROL CABLE 339 HOOD LOCK CONTROL CABLE : Removal and Installation 339 HOOD LOCK BELL CRANK 340 HOOD LOCK BELL CRANK : Removal and Installation 340 J DLK FUEL FILLER LID OPENER 356 FUEL FILLER LID 357 FUEL FILLER LID : Removal and Installation 357 FUEL FILLER LID LOCK 358 FUEL FILLER LID LOCK : Removal and Installation 358 FUEL FILLER OPENER CABLE 359 FUEL FILLER OPENER CABLE : Removal and Installation 359 L M N O DOOR SWITCH 361 Removal and Installation 361 INSIDE KEY ANTENNA 362 INSTRUMENT CENTER 362 INSTRUMENT CENTER : Removal and Installation 362 LUGGAGE ROOM 362 LUGGAGE ROOM : Removal and Installation 362 DLK-7 P OUTSIDE KEY ANTENNA 364 FRONT DOOR 364 FRONT DOOR : Removal and Installation 364 REAR BUMPER .364 REAR BUMPER : Removal and Installation 364 INTELLIGENT KEY WARNING BUZZER 365 Removal and Installation .365 INTELLIGENT KEY BATTERY 366 Removal and Installation .366 BACK DOOR OPENER SWITCH ASSEMBLY 367 Removal and Installation .367 AUTOMATIC BACK DOOR CONTROL UNIT 368 Removal and Installation .368 AUTOMATIC BACK DOOR MAIN SWITCH 369 Removal and Installation .369 AUTOMATIC BACK DOOR SWITCH 370 Removal and Installation .370 AUTOMATIC BACK DOOR CLOSE SWITCH 371 Removal and Installation .371 AUTOMATIC BACK DOOR WARNING BUZZER 372 Removal and Installation .372 Back Door Opener Switch Assembly 379 Door Lock Assembly 379 Door Lock and Unlock Switch 380 Door Switch 380 Ignition Key Cylinder 380 SYSTEM 381 POWER DOOR LOCK SYSTEM 381 POWER DOOR LOCK SYSTEM : System Description 381 POWER DOOR LOCK SYSTEM : Circuit Diagram 383 REMOTE KEYLESS ENTRY SYSTEM 384 REMOTE KEYLESS ENTRY SYSTEM : System Description 385 REMOTE KEYLESS ENTRY SYSTEM : Circuit Diagram 387 BACK DOOR OPENER SYSTEM 388 BACK DOOR OPENER SYSTEM : System Description 389 BACK DOOR OPENER SYSTEM : Circuit Diagram 390 INFORMATION DISPLAY (COMBINATION METER) 390 INFORMATION DISPLAY (COMBINATION METER) : Door Open Warning 390 INFORMATION DISPLAY (COMBINATION METER) : Key System Malfunction 391 HOW TO USE THIS MANUAL 374 WARNING/INDICATOR/CHIME LIST 392 WARNING/INDICATOR/CHIME LIST : Warning Lamp/Indicator (Information Display) 392 WARNING/INDICATOR/CHIME LIST : Warning Chime 392 APPLICATION NOTICE 374 DIAGNOSIS SYSTEM (BCM) 393 Information .374 COMMON ITEM 393 COMMON ITEM : CONSULT Function (BCM COMMON ITEM) 393 HANDS FREE SENSOR 373 Removal and Installation .373 TYPE PRECAUTION 375 PRECAUTIONS 375 Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" 375 Precaution for Procedure without Cowl Top Cover 375 Precautions for Removing Battery Terminal 375 Work 376 PREPARATION 377 PREPARATION 377 Commercial Service Tools .377 SYSTEM DESCRIPTION 378 COMPONENT PARTS 378 Component Parts Location 378 Back Door Lock Assembly .379 DOOR LOCK 394 DOOR LOCK : CONSULT Function (BCM DOOR LOCK) (Except for South Africa and General Areas Without Intelligent Key System) 394 MULTI REMOTE ENT 395 MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT) (Except for South Africa and General Areas Without Intelligent Key System) 395 TRUNK 397 TRUNK : CONSULT Function (BCM - TRUNK) (Except for South Africa and General Areas Without Intelligent Key System) 397 ECU DIAGNOSIS INFORMATION 398 DLK-8 BCM 398 List of ECU Reference 398 Diagnosis Procedure 445 Component Inspection 446 WIRING DIAGRAM 399 HAZARD FUNCTION 447 DOOR & LOCK SYSTEM 399 Component Function Check 447 Diagnosis Procedure 447 Wiring Diagram 399 BASIC INSPECTION 426 DIAGNOSIS AND REPAIR WORK FLOW 426 Work Flow 426 KEYFOB ID REGISTRATION 429 Description 429 DTC/CIRCUIT DIAGNOSIS 430 Component Function Check 448 Diagnosis Procedure 448 Component Inspection 449 C KEYFOB BATTERY 450 D Component Inspection 450 POWER SUPPLY AND GROUND CIRCUIT 451 FRONT DOOR LOCK 451 FRONT DOOR LOCK : Diagnosis Procedure 451 Component Function Check 430 Diagnosis Procedure 430 Component Inspection 431 REAR DOOR LOCK 451 REAR DOOR LOCK : Diagnosis Procedure 451 BACK DOOR OPENER ACTUATOR 432 UNLOCK SENSOR 453 BACK DOOR OPENER SWITCH 433 SYMPTOM DIAGNOSIS 455 DOOR LOCK ACTUATOR 435 Diagnosis Procedure 455 DRIVER SIDE 435 DRIVER SIDE : Component Function Check 435 DRIVER SIDE : Diagnosis Procedure 435 BACK DOOR DOES NOT OPEN 456 REAR LH 438 REAR LH : Component Function Check 438 REAR LH : Diagnosis Procedure 438 REAR RH 439 REAR RH : Component Function Check 439 REAR RH : Diagnosis Procedure 439 DOOR LOCK AND UNLOCK SWITCH 442 DRIVER SIDE 442 DRIVER SIDE : Component Function Check 442 DRIVER SIDE : Diagnosis Procedure 442 PASSENGER SIDE 443 PASSENGER SIDE : Component Function Check 443 PASSENGER SIDE : Diagnosis Procedure 443 DOOR SWITCH 445 Component Function Check 445 E F G Diagnosis Procedure 453 Component Inspection 454 Component Function Check 433 Diagnosis Procedure 433 Component Inspection 434 PASSENGER SIDE 436 PASSENGER SIDE : Component Function Check 436 PASSENGER SIDE : Diagnosis Procedure 436 B KEY SWITCH 448 BACK DOOR SWITCH 430 Diagnosis Procedure 432 A AUTO DOOR LOCK OPERATION DOES NOT OPERATE 455 Diagnosis Procedure 456 H I J DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH 457 DLK ALL DOOR 457 ALL DOOR : Description 457 ALL DOOR : Diagnosis Procedure 457 L FRONT DOOR 457 FRONT DOOR : Description 457 FRONT DOOR : Diagnosis Procedure 457 M REAR DOOR 458 REAR DOOR : Description 458 REAR DOOR : Diagnosis Procedure 458 N DRIVER SIDE 458 DRIVER SIDE : Description 458 DRIVER SIDE : Diagnosis Procedure 458 O PASSENGER SIDE 458 PASSENGER SIDE : Description 459 PASSENGER SIDE : Diagnosis Procedure 459 P REAR LH 459 REAR LH : Description 459 REAR LH : Diagnosis Procedure 459 REAR RH 459 DLK-9 REAR RH : Description 459 REAR RH : Diagnosis Procedure 459 DOOR DOES NOT LOCK/UNLOCK WITH KEYFOB 461 Diagnosis Procedure .461 IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE 462 MR20DD 480 MR20DD : Exploded View 480 MR20DD : Removal and Installation 481 QR25DE 482 QR25DE : Exploded View 483 QR25DE : Removal and Installation 484 Diagnosis Procedure .462 R9M 485 R9M : Exploded View 486 R9M : Removal and Installation 486 KEY OUT INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE 463 FRONT FENDER 489 Diagnosis Procedure .463 Exploded View 489 KEY REMINDER FUNCTION DOES NOT OPERATE 464 FRONT FENDER 489 FRONT FENDER : Removal and Installation 489 Diagnosis Procedure .464 FENDER COVER 490 FENDER COVER : Removal and Installation 490 REMINDER FUNCTION DOES NOT OPERATE 465 FRONT DOOR 491 Diagnosis Procedure .465 Exploded View 491 SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE 466 DOOR ASSEMBLY 492 DOOR ASSEMBLY : Removal and Installation 492 DOOR ASSEMBLY : Inspection 493 DOOR ASSEMBLY : Adjustment 493 Diagnosis Procedure .466 VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE 467 Diagnosis Procedure .467 DOOR STRIKER 495 DOOR STRIKER : Removal and Installation 495 SQUEAK AND RATTLE TROUBLE DIAGNOSES 468 DOOR HINGE 495 DOOR HINGE : Removal and Installation 495 Work Flow 468 Inspection Procedure .470 Diagnostic Worksheet 472 DOOR CHECK LINK 496 DOOR CHECK LINK : Removal and Installation 496 REMOVAL AND INSTALLATION 474 DOOR WEATHER-STRIP 496 DOOR WEATHER-STRIP : Removal and Installation 496 HOOD 474 Exploded View .474 HOOD ASSEMBLY 474 HOOD ASSEMBLY : Removal and Installation .474 HOOD ASSEMBLY : Inspection 475 HOOD ASSEMBLY : Adjustment 475 HOOD HINGE 477 HOOD HINGE : Removal and Installation .478 HOOD SUPPORT ROD 478 HOOD SUPPORT ROD : Removal and Installation 478 RADIATOR CORE SEAL 478 RADIATOR CORE SEAL : Removal and Installation 478 REAR DOOR 499 Exploded View 499 DOOR ASSEMBLY 500 DOOR ASSEMBLY : Removal and Installation 500 DOOR ASSEMBLY : Inspection 501 DOOR ASSEMBLY : Adjustment 501 DOOR STRIKER 503 DOOR STRIKER : Removal and Installation 503 DOOR HINGE 503 DOOR HINGE : Removal and Installation 503 DOOR CHECK LINK 504 DOOR CHECK LINK : Removal and Installation 504 HOOD INSULATOR 479 HOOD INSULATOR : Removal and Installation 479 DOOR WEATHER-STRIP 504 DOOR WEATHER-STRIP : Removal and Installation 504 RADIATOR CORE SUPPORT 480 BACK DOOR 326 DLK-10 COMPONENT PARTS [ECO MODE] < SYSTEM DESCRIPTION > ECO Mode Switch INFOID:0000000010580327 A • The ECO mode switch is installed to the instrument lower panel • When the ECO mode indicator lamp on the combination meter is OFF and the ECO mode switch is pressed, the ECO mode is active and the ECO mode indicator lamp is ON • When the ECO mode indicator lamp on the combination meter is ON and the ECO mode switch is pressed, the ECO mode is cancelled and the ECO mode indicator lamp is OFF B C D JSOIA0767ZZ E F G H I J K L M N DMS P DMS-5 SYSTEM [ECO MODE] < SYSTEM DESCRIPTION > SYSTEM ECO MODE CONTROL ECO MODE CONTROL : System Description INFOID:0000000010580329 SYSTEM DIAGRAM JSOIA0679GB SYSTEM DISCRIPTION • TCM receives ECO mode switch signal (ON/OFF) from combination meter via CAN communication TCM transmits ECO mode signal to ECM via CAN communication according to the signal • ECM transmits ECO mode indicator signal to combination meter via CAN communication Combination meter displays ECO mode indicator according to the signal NOTE: • When the ignition switch is turned OFF while the ECO mode indicator stays ON, the ECO mode indicator automatically turns ON at the next ignition switch ON • The ECO mode system cannot be turned off while the accelerator pedal is depressed even if the ECO mode switch is pushed to OFF (ECO mode indicator turns OFF.) Release the accelerator pedal to turn off the ECO mode system ECU Control • For TCM control, refer to TM-286, "ECO MODE SYSTEM : System Description" (RE0F10D), or TM-503, "CVT CONTROL SYSTEM : Component Parts Location" (RE0F10G) • For ECM control, refer to EC-66, "ECO MODE SYSTEM : System Description" (MR20DD), EC-487, "ECO MODE CONTROL : System Description" (QR25DE), or EC-888, "ECO MODE SYSTEM : System Description" (R9M) DMS-6 SYSTEM [ECO MODE] < SYSTEM DESCRIPTION > ECO MODE CONTROL : Circuit Diagram INFOID:0000000010580330 A GASOLINE ENGINE MODELS B C D E F G H JSOIA1565GB I DIESEL ENGINE MODELS J K L M N DMS P JSOIA1749GB INFORMATION DISPLAY (COMBINATION METER) DMS-7 SYSTEM [ECO MODE] < SYSTEM DESCRIPTION > INFORMATION DISPLAY (COMBINATION METER) : ECO Mode Indicator INFOID:0000000010621366 DESIGN/PURPOSE The ECO mode indicator informs the driver that the vehicle is in ECO mode JPNIA1941ZZ OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL For actions on CAN communications blackout in the combination meter, refer to MWI-111, "Fail-Safe" SYSTEM DIAGRAM JSDIA5610GB SIGNAL PATH • TCM receives ECO mode switch signal (ON/OFF) from combination meter via CAN communication Based on the signal, TCM transmits ECO mode signal to ECM via CAN communication • ECM transmits ECO mode indicator signal to combination meter via CAN communication Based on the signal, combination meter illuminates ECO mode indicator LIGHTING CONDITION When all of the following conditions are satisfied • Ignition switch: ON • The ECO mode switch is pressed when the ECO mode indicator is OFF NOTE: When the ignition switch is turned OFF while the ECO mode indicator stays ON, the ECO mode indicator automatically turns ON at the next ignition switch ON SHUTOFF CONDITION When any of the condition listed below is satisfied • Ignition switch: Other than ON • The ECO mode switch is pressed when the ECO mode indicator is ON DMS-8 SYSTEM [ECO MODE] < SYSTEM DESCRIPTION > TIMING CHART A B C D E JSDIA5609GB WARNING/INDICATOR/CHIME LIST WARNING/INDICATOR/CHIME LIST : Warning Lamp/Indicator Lamp Name Design F INFOID:0000000010621368 G Arrangement/Function Regarding the arrangement Refer to MWI-10, "METER SYSTEM : Design" ECO mode indicator lamp Regarding the function Refer to MWI-33, "WARNING LAMPS/INDICATOR LAMPS : ECO Mode Indicator Lamp" WARNING/INDICATOR/CHIME LIST : Warning/Indicator (On Information Display) INFOID:0000000010621376 Item ECO mode indicator Reference H I J Refer to DMS-8, "INFORMATION DISPLAY (COMBINATION METER) : ECO Mode Indicator" K L M N DMS P DMS-9 ECO MODE [ECO MODE] < ECU DIAGNOSIS INFORMATION > ECU DIAGNOSIS INFORMATION ECO MODE List of ECU Reference INFOID:0000000010580331 ECU Reference TM-296, "Reference Value" TM-303, "Fail-safe" RE0F10D TM-306, "DTC Inspection Priority Chart" TM-307, "DTC Index" TCM TM-547, "Reference Value" TM-554, "Fail-safe" RE0F10G TM-560, "DTC Inspection Priority Chart" TM-561, "DTC Index" EC-89, "Reference Value" EC-103, "Fail-safe" MR20DD EC-107, "DTC Inspection Priority Chart" EC-109, "DTC Index" EC-510, "Reference Value" ECM EC-522, "Fail Safe" QR25DE EC-525, "DTC Inspection Priority Chart" EC-526, "DTC Index" EC-913, "Reference Value" EC-925, "Fail-safe" R9M EC-932, "DTC Inspection Priority Chart" EC-934, "DTC Index" MWI-100, "Reference Value" MWI-111, "Fail-Safe" Combination meter MWI-112, "DTC Inspection Priority Chart" MWI-112, "DTC Index" DMS-10 ECO MODE SYSTEM [ECO MODE] < WIRING DIAGRAM > WIRING DIAGRAM A ECO MODE SYSTEM Wiring Diagram INFOID:0000000010580332 B C D E F G H I J K L M N DMS P JROWD1383GB DMS-11 ECO MODE SYSTEM [ECO MODE] < WIRING DIAGRAM > JROWD1384GB DMS-12 ECO MODE SYSTEM [ECO MODE] < WIRING DIAGRAM > A B C D E F G H I J K L M N DMS JROWD1385GB P DMS-13 DIAGNOSIS AND REPAIR WORK FLOW [ECO MODE] < BASIC INSPECTION > BASIC INSPECTION DIAGNOSIS AND REPAIR WORK FLOW Work Flow INFOID:0000000010580333 DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurs >> GO TO 2.CHECK SYMPTOM • Check the symptom based on the information obtained from the customer • Check if any other malfunctions are present >> GO TO 3.DTC/SYSTEM DIGANOSIS Perform a DTC/system diagnosis and repair or replace any malfunctioning part >> GO TO 4.FINAL CHECK Check that the ECO mode functions normally Does it operation normally? YES >> INSPECTION END NO >> GO TO DMS-14 ECO MODE SWITCH [ECO MODE] < DTC/CIRCUIT DIAGNOSIS > DTC/CIRCUIT DIAGNOSIS A ECO MODE SWITCH Component Function Check INFOID:0000000010580334 B CHECK ECO MODE SWITCH OPERATION Turn ignition switch ON Check ECO mode indicator turns ON/OFF on combination meter when turn ECO mode switch ON/OFF Is the inspection result normal? YES >> INSPECTION END NO >> Go to DMS-15, "Diagnosis Procedure" Diagnosis Procedure INFOID:0000000010580335 C D E 1.DETECT MALFUNCTIONING ITEMS What is malfunction item? ECO mode switch illumination does not turn ON>>GO TO ECO mode indicator does not turn ON>>GO TO 2.CHECK ECO MODE SWITCH ILLUMINATION POWER SUPPLY (PART 1) Turn OFF the headlamp Turn ignition switch OFF Disconnect ECO mode switch harness connector Turn ignition switch ON Turn ON the headlamp Check the voltage between ECO mode switch harness connector terminals ECO mode switch + Connector – Voltage (Approx.) 12 V F G H I J Terminal M9 Is the inspection result normal? YES >> GO TO NO >> GO TO K L 3.CHECK INTERMITTENT INCIDENT Refer to GI-55, "Intermittent Incident" Is the inspection result normal? YES >> Replace ECO mode switch Refer to DMS-19, "Removal and Installation" NO >> Replace the fuse after repair the applicable circuit M N 4.CHECK ECO MODE SWITCH ILLUMINATION POWER SUPPLY (PART 2) Check the voltage between ECO mode switch harness connector and ground DMS + ECO mode switch Connector Terminal M9 − Voltage (Approx.) Ground 12 V Is the inspection result normal? YES >> GO TO NO >> GO TO DMS-15 P ECO MODE SWITCH [ECO MODE] < DTC/CIRCUIT DIAGNOSIS > 5.CHECK CIRCUIT BETWEEN COMBINATION METER AND ECO MODE SWITCH Disconnect combination meter connector M42 Check the continuity between combination meter harness connector terminal and ECO mode switch harness connector terminal Combination meter ECO mode switch Connector Terminal Connector Terminal M42 43 M9 Continuity Existed Also check harness for short to ground Is the inspection result normal? YES >> GO TO 11 NO >> Repair or replace malfunctioning parts 6.CHECK GROUND CIRCUIT Turn OFF the headlamp Turn ignition switch OFF Check continuity between ECO mode switch harness connector terminal and ground ECO mode switch Connector Terminal M9 — Continuity Ground Existed Is the inspection result normal? YES >> Check intermittent incident Refer to GI-55, "Intermittent Incident" NO >> Repair or replace malfunctioning parts 7.CHECK ECO MODE SWITCH CIRCUIT Turn ignition switch OFF Disconnect ECO mode switch connector Turn ignition switch ON Check voltage between ECO mode switch harness connector terminals ECO mode switch Connector M9 + − Voltage (Approx.) 10 V Terminal Is the inspection result normal? YES >> GO TO 12 NO >> GO TO 8.CHECK GROUND CIRCUIT Turn ignition switch OFF Check the continuity between ECO mode switch harness connector and ground ECO mode switch Connector Terminal M9 — Continuity Ground Existed Is the inspection result normal? YES >> GO TO NO >> Repair or replace malfunctioning parts 9.CHECK CIRCUIT BETWEEN COMBINATION METER AND ECO MODE SWITCH (PART 1) Disconnect combination meter harness connector M34 DMS-16 ECO MODE SWITCH [ECO MODE] < DTC/CIRCUIT DIAGNOSIS > Check continuity between combination meter harness connector terminal and ECO mode switch harness connector terminal Combination meter ECO mode switch Connector Terminal Connector Terminal M34 M9 Continuity A B Existed Is the inspection result normal? YES >> GO TO 10 NO >> Repair or replace malfunctioning parts C 10.CHECK CIRCUIT BETWEEN COMBINATION METER AND ECO MODE SWITCH (PART 2) D Check continuity between combination meter harness connector terminal and ground E Combination meter Connector Terminal M34 — Continuity Ground Not existed F Is the inspection result normal? YES >> GO TO 11 NO >> Repair or replace malfunctioning parts G 11.CHECK COMBINATION METER INPUT/OUTPUT SIGNAL Connect all of disconnected connectors Check input/output signal of combination meter Refer to MWI-100, "Reference Value" Is the inspection result normal? YES >> Check intermittent incident Refer to GI-55, "Intermittent Incident" NO >> Replace combination meter Refer to MWI-162, "Removal and Installation" H I 12.CHECK ECO MODE SWITCH J Check ECO mode switch Refer to DMS-17, "Component Inspection" Is the inspection result normal? YES >> Check intermittent incident Refer to GI-55, "Intermittent Incident" NO >> Replace ECO mode switch Refer to DMS-19, "Removal and Installation" Component Inspection K INFOID:0000000010580336 L 1.CHECK ECO MODE SWITCH Check continuity between ECO mode switch connector terminals M ECO mode switch Terminal 1–2 Condition Continuity ECO mode switch is depressed Existed ECO mode switch is released N Not existed Is the inspection result normal? YES >> INSPECTION END NO >> Replace ECO mode switch Refer to DMS-19, "Removal and Installation" DMS P DMS-17 THE ECO MODE INDICATOR DOES NOT TURN ON [ECO MODE] < SYMPTOM DIAGNOSIS > SYMPTOM DIAGNOSIS THE ECO MODE INDICATOR DOES NOT TURN ON Description INFOID:0000000010580337 The ECO mode indicator does not turn ON when the ECO mode switch is operated Diagnosis Procedure INFOID:0000000010580338 1.PERFORM COMBINATION METER ON BOARD DIAGNOSIS Perform combination meter on board diagnosis and check ECO mode indicator is turns ON Refer to MWI-91, "On Board Diagnosis Function" Is the check result normal? YES >> GO TO NO >> Replace combination meter Refer to MWI-162, "Removal and Installation" 2.CHECK DTC (TCM) With CONSULT Start the engine Check “Self Diagnostic Results” in “TRANSMISSION” Is any DTC detected? YES >> Check DTC detected item Refer to TM-307, "DTC Index" (RE0F10D), or TM-561, "DTC Index" (RE0F10G) NO >> GO TO 3.CHECK DTC (ECM) With CONSULT Check “Self Diagnostic Results” in “ENGINE” Is any DTC detected? YES >> Check DTC detected item Refer to EC-109, "DTC Index" (MR20DD), EC-526, "DTC Index" (QR25DE), or EC-934, "DTC Index" (R9M) NO >> GO TO 4.CHECK DTC (COMBINATION METER) With CONSULT Check “Self Diagnostic Results” in “METER/M&A” Is any DTC detected? YES >> Check DTC detected item Refer to MWI-112, "DTC Index" NO >> GO TO 5.CHECK COMBINATION METER INPUT/OUTPUT SIGNAL With CONSULT Select “Data Monitor” in “METER/M&A” Select “ECO MODE IND” Check that “ECO MODE IND” turns ON/OFF when ECO mode switch is operated Refer to MWI-100, "Reference Value" Is any DTC detected? YES >> Replace combination meter Refer to MWI-162, "Removal and Installation" NO >> GO TO 6.CHECK ECO MODE SWITCH CIRCUIT Check ECO mode switch circuit Refer to DMS-15, "Diagnosis Procedure" Is the check result normal? YES >> INSPECTION END NO >> Repair or replace malfunctioning parts DMS-18 ECO MODE SWITCH [ECO MODE] < REMOVAL AND INSTALLATION > REMOVAL AND INSTALLATION A ECO MODE SWITCH Removal and Installation INFOID:0000000010580339 B Remove instrument lower panel LH (for China) or instrument lower panel RH (except for China) Refer to IP-15, "Removal and Installation" (For China), IP-47, "Removal and Installation" (except for China) Remove switch bracket from instrument lower panel Remove ECO mode switch from switch bracket NOTE: For design of ECO mode switch, refer to DMS-5, "ECO Mode Switch" C REMOVAL D E F JSOIA1375ZZ G INSTALLATION Install in the reverse order of removal H I J K L M N DMS P DMS-19