HỆ THỐNG NGOẠI THẤT TRÊN XE MATIZ ĐỜI 2000-2013
DAEWOO M-150 BL2 SECTION 9M EXTERIOR TRIM TABLE OF CONTENTS Description and Operation 9M-2. . . . . . . . . . . . . . . . . . Emblems and Lettering 9M-2. . . . . . . . . . . . . . . . . . . . . Mud Guards 9M-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repair Instructions 9M-3. . . . . . . . . . . . . . . . . . . . . . . . . On-Vehicle Service 9M-3. . . . . . . . . . . . . . . . . . . . . . . . . . Roof Molding 9M-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Spoiler 9M-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Bumper Spacer 9M-4. . . . . . . . . . . . . . . . . . . . . . Tailgate Handle 9M-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 9M –2 EXTERIOR TRIM DAEWOO M-150 BL2 DESCRIPTION AND OPERATION EMBLEMS AND LETTERING The emblems and lettering on the vehicle are attached by adhesive. The company emblem appears on the hood. The lettering, which appears in several places on the body of the vehicle, features the model, the grade, and the company name. MUD GUARDS Front and rear mud guards are optional equipment on all models. Mud guards will help prevent an excessive buildup of mud on the body. EXTERIOR TRIM 9M–3 DAEWOO M-150 BL2 REPAIR INSTRUCTIONS ON–VEHICLE SERVICE D109E586 ROOF MOLDING Removal Procedure 1. Remove the roof molding from the plastic clips (1). D109E587 Installation Procedure 1. Press the roof molding onto the plastic clips. D19E588A REAR SPOILER Removal Procedure 1. Open the tailgate. 2. Remove the spoiler seals. 9M – 4 EXTERIOR TRIM DAEWOO M-150 BL2 D19E589A 3. Remove the rear spoiler from the tailgate. D Remove the nuts (1). D Remove the rear spoiler (2). D19E590A Installation Procedure 1. Install the rear spoiler on the tailgate with the nuts. 2. Install the spoiler seals. D209B109 FRONT BUMPER SPACER Removal Procedure 1. Support the hood suitably. 2. Disconnect the negative battery cable. 3. Remove the front bumper spacer. D Remove the bolts (1). D Remove the front bumper spacer from the bumper fascia (2). 4. Remove the turn signal lamps. Refer to Section 9B, Lighting Systems. D209B110 Installation Procedure 1. Install the turn signal lamps. Refer to Section 9B, Lighting Systems. 2. Install the front bumper spacer with the bolts. 3. Connect the negative battery cable. EXTERIOR TRIM 9M–5 DAEWOO M-150 BL2 D209B111 TAILGATE HANDLE Removal Procedure 1. Disconnect the negative battery cable. 2. Open the tailgate. 3. Remove the tailgate lock cylinder. Refer to Section 9P, Doors. 4. Remove the license plate lamps. Refer to Section 9B, Lighting Systems. 5. Remove the tailgate handle. D Remove the screws (1). D Remove the tailgate handle (2). D209B112 Installation Procedure 1. Install the tailgate handle with the screws. 2. Install the license plate lamps. Refer to Section 9B, Lighting Systems. 3. Remove the tailgate lock cylinder. Refer to Section 9P, Doors. 4. Connect the negative battery cable. . DAEWOO M-150 BL2 SECTION 9M EXTERIOR TRIM TABLE OF CONTENTS Description and Operation 9M-2. . . . . . . . . . . . . . . . . . Emblems and Lettering 9M-2. . . . . . . . . . . . . . . . . . . . . . . . . Tailgate Handle 9M-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 9M –2 EXTERIOR TRIM DAEWOO M-150 BL2 DESCRIPTION AND OPERATION EMBLEMS AND LETTERING The. . Mud Guards 9M-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repair Instructions 9M-3. . . . . . . . . . . . . . . . . . . . . . . . . On-Vehicle Service 9M-3. . . . . . .