INTERNATIONAL STANDARD IEC 60454 3 12 Second edition 2006 01 Pressure sensitive adhesive tapes for electrical purposes – Part 3 Specifications for individual materials – Sheet 12 Requirements for poly[.]
INTERNATIONAL STANDARD IEC 60454-3-12 Second edition 2006-01 Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive Reference number IEC 60454-3-12:2006(E) Copyright International Electrotechnical Commission Publication num bering As from January 1997 all IEC publications are issued with a designation in the 60000 series For example, IEC 34-1 is now referred to as IEC 60034-1 C onsolidated editions The IEC is now publishing consolidated versions of its publications For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment and the base publication incorporating amendments and Further inform ation on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: • IE C W eb Site (w w w iec.ch) • C atalogue of IE C publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda • IE C Just P ublished This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email Please contact the Customer Service Centre (see below) for further information • C ustom er S ervice C entre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserv@iec.ch Copyright International Electrotechnical Commission Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 60454-3-12 Second edition 2006-01 Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch Commission Electrotechnique Internationale International Electrotechnical Commission Международная Электротехническая Комиссия Copyright International Electrotechnical Commission PRICE CODE J For price, see current catalogue – – 60454-3-12 IEC:2006(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES – Part 3: Specifications for individual materials – Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive FOREWORD 1) The International Electrotec hnical Comm ission (IEC) is a worldwide organization for standardization com prisin g all national electrotechnical comm ittees (IEC National Comm ittees) The object of IEC is to prom ote international co-operation on all questions c oncerning standardization in the electrical and electronic fields To this end and in addition t o other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s )”) Their preparat ion is entrusted to technical comm ittees; any IEC National Comm ittee interested in the subject dealt with m ay participate in this preparatory work International, governm ental and non- governm ental organizations liaising with the IEC also participate in this preparation IEC collaborates closel y with the International Organization for Standardization (ISO) in accordanc e with conditions determ ined by agreem ent between the two organizations 2) The form al decisions or agreem ents of IEC on technical m atters express, as nearly as possible, an international consensus of opinion on the relevant subjects since eac h technical com m ittee has representation from all interested IEC National Com m ittees 3) IEC Publications have the form of recom m endations for int ernational use and are accepted by IEC National Com m ittees in that sense W hile all reasonable efforts are m ade to ensure that the tec hnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for an y m isinterpretation by any end user 4) In order to prom ote international uniform ity, IEC National Com m ittees undertake t o apply IEC Publications transparently to the m axim um extent possible in their national and regional publications Any divergenc e between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter 5) IEC provides no m arking procedure to indicate its approval and cannot be rendered responsible for any equipm ent declared to be in conform ity with an IEC Publication 6) All users should ensure that they have the latest edition of this publication 7) No liabilit y shall attach to IEC or its directors, em ployees, servants or agents including individual experts and m em bers of its technical c omm ittees and IEC National Com m ittees for any personal injury, property dam age o r other dam age of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) a nd expenses arising out of the publication, use of, or reliance upon, this IEC P ublication or any other IE C Publications 8) Attention is drawn to the Norm ative references cited in this publication Use of the referenced publications is indispensable for the correct application of this public ation 9) Attention is drawn to the poss ibility that som e of the elem ents of this IEC Publication m ay be the subject of patent rights IEC shall not be held responsible for identifying any or all such patent rights International Standard IEC 60454-3-12 has been prepared by IEC technical committee 15: Insulating materials This second edition of IEC 60454-3-12 replaces the first edition, published in 1998, as well as IEC 60454-3-18, published in 2003 It constitutes a technical revision This edition replaces the previous second edition and includes its consolidation with the texts of IEC 604 4-3-18 (2003) The text of this standard is based on the following documents: FDIS Report on voting 15/261/FDIS 15/288/RV D Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table Copyright International Electrotechnical Commission 60454-3-12 IEC:2006(E) – – This publication has been drafted in accordance with the ISO/IEC Directives, Part The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication At this date, the publication will be • reconfirmed; • withdrawn; • replaced by a revised edition, or • amended A bilingual version of this publication may be issued at a later date Copyright International Electrotechnical Commission – – 60454-3-12 IEC:2006(E) INTRODUTION This International Standard is one of a series, which deals with pressure-sensitive adhesive tapes, intended primarily for electrical purposes The series consists of three parts: Part 1: General requirements (IEC 60454-1) Part 2: Methods of test (IEC 60454-2) Part 3: Specifications for individual materials (IEC 60454-3) This standard contains one of the sheets comprising part as follows: Sheet 12: Polyethylene and polypropylene film tapes pressure sensitive adhesives SAFETY W ARNING It is the responsibility of the user of the methods contained or referred to in this standard to ensure that they are used in a safe manner Copyright International Electrotechnical Commission 60454-3-12 IEC:2006(E) – – PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES – Part 3: Specifications for individual materials – Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive Scope This sheet of IEC 60454-3 contains requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesives Materials which conform to this specification meet established levels of performance However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials IEC 60454-1:1992, Specifications for pressure-sensitive adhesive tapes for electrical pressure-sensitive adhesive tapes for electrical purposes – Part 1: General requirements IEC 60454-2:1994, Specifications for purposes – Part 2: Methods of test Terms and definitions For the purposes of this document, the definitions of IEC 60454-1 apply Classification and designation 4.1 Polyethylene film tapes with pressure sensitive adhesive 4.1.1 The products supplied according to this specification shall be classified as follows: Type 1: Products having a thermal index of 90 and a minimum temperature rating of –10 °C Type 2: Products having a thermal index of 90 and a minimum temperature rating of –18 °C Type 3: Products having a thermal index of 90 and a minimum temperature rating of –33 °C Type 4: Products having a thermal index of 75 and a minimum temperature rating of –10 °C Type 5: Products having a thermal index of 75 and a minimum temperature rating of –18 °C Type 6: Products having a thermal index of 75 and a minimum temperature rating of –33 °C Copyright International Electrotechnical Commission – – IEC:2006(E) The products shall be designated for ordering purposes as follows: 4.1.2 Type 1: IEC 60454-3-12-1/F-PE/90 Type 2: IEC 60454-3-12-2/F-PE/90 Type 3: IEC 60454-3-12-3/F-PE/90 Type 4: IEC 60454-3-12-4/F-PE/75 Type 5: IEC 60454-3-12-5/F-PE/75 Type 6: IEC 60454-3-12-6/F-PE/75 NOTE 60454-3-12 The nature of the adhesive is not classified, since several classes of adhesive m ay satisfy the perform ance requirem ents of this specification Adhesive types m ay be based on agreem ent between purchaser and supplier 4.2 Polyprop ylene film tapes with p ressure sensitive adhesive 4.2.1 The products supplied according to this specification shall be classified as follows: Type 1: Products having properties characteristic of a biaxially oriented polypropylene film with a thermal index of 105 with an acrylic crosslinked adhesive Type 2: Products having properties characteristic of a biaxially oriented polypropylene film with a thermal index of 105 with a rubber thermosetting adhesive Type 3: Products having properties characteristic of a biaxially oriented polypropylene film with a thermal index of 105 with an acrylic thermoplastic adhesive 4.2.2 The products supplied according to this specification shall be classified as follows: Type 1: IEC 60454-3-12-1/F-PP/105/A-Tx Type 2: IEC 60454-3-12-2/ F-PP/105/R-Tc Type 3: IEC 60454-3-12-3/ F-PP/105/A-Tp Requirements All applicable requirements of IEC 60454-1 shall apply to material furnished under this specification The electric and other physical properties of products supplied according to this specification shall be within the limits listed in Tables and when tested in accordance with the test methods listed therein 5.1 Thermal endurance 5.1.1 Polyethylene film tapes with pressure sensitive adhesiv es W hen required by the purchaser, the manufacturer shall provide evidence that when tested in accordance with Clause 21 of IEC 60454-2, the product has a temperature index of not less than 90 for Types 1, 2, and 3; and not less than 75 for Types 4, 5, and The exposure temperatures shall be 100 °C, 110 °C and 120 °C for Types 1, 2, and 3; and 90 °C, 100 °C and 110 °C for T ypes 4, 5, and The end-point criterion used shall be: – for breakdown voltage: 2,5 kV (metal foil electrode) Copyright International Electrotechnical Commission 60454-3-12 IEC:2006(E) 5.1.2 –7– Polypropylene film tapes with pressure sensitive adhesives When required by the purchaser, the manufacturer shall provide evidence that when tested in accordance with Clause 21 of IEC 60454-2, the product has a temperature index of not less than 105 The exposure temperatures shall be 120 °C, 140 °C and 160 °C The end-point criterion used shall be: – for breakdown voltage: 1,0 kV (metal foil electrode) 5.2 Low tem perature performance 5.2.1 Polyethylene film tapes with pressure sensitive adhesiv es When required by the purchaser, the manufacturer shall provide evidence of the low temperature performance when tested in accordance with the conditions specified in Table 3; the tape shall have a minimum temperature rating as follows: Types 1, 4: –10 °C Types 2, 5: –18 °C Types 3, 6: –33 °C Test methods All tests shall be conducted in accordance with the appropriate clauses and subclauses of IEC 60454-2 Marking, labelling and packaging Unless otherwise specified, all marking, labelling and packaging shall be in accordance with the requirements of IEC 60454-1 Table – Requirements for all types Propert y Claus e or sub claus e Units Requirement s of IEC 60 45 4-2 Thickness mm Width Length Electrolytic corrosion -Insulation resistance after 24 h at (23±2) °C and (93±2) % relative humidity or -Visual method mm m 7.5 Thermal endurance 21 Copyright International Electrotechnical Commission 7.6 Ω /25 mm width None Nominal value per manufacturer ±0,025 mm or ±20 % whichever is greater 7.2.1 of IEC 60454-1 7.3 of IEC 60454-1 x 1010 minimum Grade shall be at least as good as A 1,4 (see Table of IEC 60426) See 5.3 _ ni m 04 ni m 04 _ _ _ ni m 54 ni m 54 _ _ _ n i m 54 n i m 54 _ _ - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 - ni m 0,1 ni m 04 ni m 03 ni m 5,1 ni m 01 mm mm /Vk mm /Vk htdiw m m01 /N N 71 81 21 31 stinU r o e s ua lC es ualcbus fo 2- 45 406 C E I 2.5 51 rep s A 51 htdiw m m01 /N 11 1.5 51 rep s A - e py T ni m 5,1 - e py T ni m 5,1 - e py T ni m 5,1 mm e py T ni m 5,1 - e py T ni m 5,1 - e py T ni m 5,1 - e py T ni m 2,2 - 11 n o i sr e m m i r etaw r e tf a g n i k c a b ot noise hda r aeh S ) s er u t ar e p m e t t s e t r of elb aT ees( er u t ar e p m e t wo l ta gnikcab ot n oisehdA gnin oitidnoc d i m u h r e tf a er u t ar e p m e t m o or t a egatlov n w o d k a er B gnikcab ot n oisehdA er u t ar e p m e t m o or t a er u t ar e p m e t g n ir u c t a tse t gniggalF leets ot n oisehdA k a er b ta noitagnolE - htdiw m m 01/N h t g n er t s elisneT - % m u m ix a m ni m 6,2 htdiw m m 01/N m u m ix a m ni m 8,1 ni m 05 ni m 05 ni m 051 ni m 051 ni m 051 ni m 051 ni m 051 ni m 051 ssenkciht ssenkciht ssenkciht ssenkciht s sen k c ih t ssenkciht ssenkciht ssenkciht epat fo m m rep epa t fo m m epa t fo m m epa t fo m m epa t fo m m epat fo m m epa t fo mm epa t fo m m ni m 005 rep ni m 005 rep ni m 001 rep ni m 001 rep ni m 001 rep ni m 001 rep ni m 001 rep ni m 001 m u m ix a m ni m 05 ssenkciht epat fo m m rep ni m 005 e py T e n e ly h t ey l o P y tr e p or P e py T e n e ly p o r py l o P s e p y t s u o i r a v r of s t n e m e r i u q e R – e l b a T Copyright International Electrotechnical Commission 60454-3-12 IEC:2006(E) –8– 60454-3-12 IEC:2006(E) – – Table – Low temperature performance Low temperature rating Temperature for Clause Temperature for clause 12 of IEC 60454-2 of IEC 60454-2 –10 ° C (–18 ± 1) ° C (–10 ± 1) ° C –18 ° C (–26 ± 1) ° C (–18 ± 1) ° C –33 ° C (–40 ± 1) ° C (–18 ± 1) ° C Copyright International Electrotechnical Commission Standards Survey The IEC w ould like to offer you the bestquality standards possible.To m ake sure thatw e continue to m eetyour needs,your feedback is essential.W ould you please take a m inute to answ er the questions overleafand fax them to us at+41 22 919 03 00 or m ailthem to the address below Thank you! Customer Service Centre (CSC) InternationalElectrotechnicalC om m ission 3, rue de Varembé 1211 Genève 20 Switzerland or Fax to: IEC /CSC at +41 22 919 03 00 Thank you for your contribution to the standards-making process Nicht frankieren Ne pas affranchir A Prioritaire Non affrancare No stamp required RÉPO NSE PAYÉE SU ISSE Customer Service Centre (CSC) InternationalElectrotechnicalC om m ission 3, rue de Varembé 1211 GENEVA 20 Switzerland Copyright International Electrotechnical Commission Q1 O N E STA N D A R D and O N E STA N D A R D O N LY Enter the exact Please report on Q6 If you ticked NOT AT ALL in Question the reason is: (tick all that apply) number of the standard: (e.g 60601-1-1) standard is out of date Q2 standard is incomplete standard is too academic Please tell us in what capacity(ies) you standard is too superficial bought the standard (tick all that apply) title is misleading I am the/a: I made the wrong choice other purchasing agent librarian researcher design engineer safety engineer Q7 Please assess the standard in the following categories, using testing engineer the numbers: marketing specialist (1) unacceptable, (2) below average, other (3) average, (4) above average, Q3 (5) exceptional, I work for/in/as a: (6) not applicable (tick all that apply) timeliness manufacturing quality of writing consultant technical contents government logic of arrangement of contents test/certification facility tables, charts, graphs, figures public utility other education military other Q4 Q8 I read/use the: (tick one) This standard will be used for: French text only (tick all that apply) English text only both English and French texts general reference product research product design/development specifications tenders quality assessment certification Q9 Please share any comment on any aspect of the IEC that you would like us to know: technical documentation thesis manufacturing other Q5 This standard meets my needs: (tick one) not at all nearly fairly well exactly Copyright International Electrotechnical Commission ISBN 2-8318-8482-9 -:HSMINB=]]Y]WU: ICS 29.035.20 Typeset and printed by the IEC Central Office GENEVA, SWITZERLAND Copyright International Electrotechnical Commission