NORME INTERNATIONALE INTERNATIONAL STANDARD CEI IEC 60191-2 AMENDEMENT AMENDMENT 2002-04 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Amendement Normalisation mécanique des dispositifs semiconducteurs – Partie 2: Dimensions Amendment Mechanical standardization of semiconductor devices – Part 2: Dimensions Les feuilles de cet amendement sont insérer dans la Publication 60191-2 The sheets contained in this amendment are to be inserted in Publication 60191-2 CODE PRIX PRICE CODE S Pour prix, voir catalogue en vigueur For price, see current catalogue LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU 60191-2 Amend © CEI/IEC:2002 INSTRUCTIONS FOR THE INSERTION OF NEW PAGES IN IEC 60191-2 Remplacer la page de titre existante par la nouvelle page de titre Replace the existing title page with the new title page Retirer la page 60191 IEC I existante contenant la préface et la remplacer par la nouvelle page 60191 IEC I contenant la préface l'amendment (2002) Remove the existing page 60191 IEC I containing the preface and insert in its place the new page 60191 IEC I containing the preface to Amendment (2002) Chapitre I: Chapter I: Ajouter les nouvelles feuilles suivantes: Add the following new sheets: 60191 IEC I-157E - a/b/c/d/e/f/g/h/i/j/k/l/m/ n/o/p/q/r/s 60191 IEC I-158E - a/b/c/d/e/f/g/h/i/j/k/l/m/ n/o/p 60191 IEC I-163E – a/b 60191 IEC I-157E - a/b/c/d/e/f/g/h/i/j/k/l/m/ n/o/p/q/r/s 60191 IEC I-158E - a/b/c/d/e/f/g/h/i/j/k/l/m/ n/o/p 60191 IEC I-163E – a/b LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU INSTRUCTIONS POUR L’INSERTION DES NOUVELLES PAGES DANS LA CEI 60191-2 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU NORME INTERNATIONALE INTERNATIONAL STANDARD CEI IEC 60191-2 Première édition First edition 1966 Normalisation mécanique des dispositifs semiconducteurs – Partie 2: Dimensions Mechanical standardization of semiconductor devices – Part 2: Dimensions IEC 2002 Droits de reproduction réservés Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch Com m ission Electrotechnique Internationale International Electrotechnical Comm ission Международная Электротехническая Комиссия LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Modifiée selon les Compléments: Amended in accordance with Supplement: A (1967), B (1969), C (1970), D (1971), E (1974), F (1976), G (1978), H (1978), J (1980), K (1981), L (1982), M (1983), N (1987), P (1988), Q (1990), R (1995), S (1995), T(1995), U(1997), V(1998), W(1999), X(1999), Y(2000), Z(2000) et/and Amendement/Amendment (2001), 2(2001), 3(2001), 4(2001), 5(2002), 6(2002) LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL COMMISSION PUBLICATION 191-2 PUBLICATION 191-2 NORMALISATION MÉCANIQUE DES DISPOSITIFS À SEMICONDUCTEURS MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES DEUXIÈME PARTIE: DIMENSIONS PART 2: DIMENSIONS SOMMAIRE CONTENTS FOREWORD PRÉFACE PREFACE CONCEPTION DE LA NORMALISATION MÉCANIQUE PHILOSOPHY OF MECHANICAL STANChapitre 00 VALEURS RECOMMANDÉES POUR CER- DARDIZATION Chapter 00 RECOMMENDED VALUES FOR CERTAIN TAINES DIMENSIONS DE DESSINS DE DIMENSIONS OF DRAWINGS OF SEMI- DISPOSITIFS À SEMICONDUCTEURS Chapitre CONDUCTOR DEVICES Chapter DESSINS D'ENCOMBREMENTS Chapitre I DEVICE OUTLINE DRAWINGS Chapter I TYPES DE DISPOSITIFS À SEMICONDUC- TYPES OF SEMICONDUCTOR DEVICES TEURS GÉNÉRALEMENT MONTÉS GENERALLY MOUNTED IN THE DANS LES BTIERS DU CHAPITRE I PACKAGES OF CHAPTER I DESSINS D'EMBASES Chapitre II BASE DRAWINGS Chapter II DESSINS DE BTIERS Chapitre III CASE OUTLINE DRAWINGS Chapter III DESSINS DE CALIBRES Chapitre IV GAUGE DRAWINGS Chapter IV TABLEAUX MONTRANT LES ASSOCIA- TABLES SHOWING ASSOCIATIONS BE- TIONS ENTRE LES BTIERS ET LES EMBASES TWEEN CASE OUTLINES AND BASES DESSINS OBSOLÈTES OBSOLETE DRAWINGS COMPLÉMENTS AUX LISTES DE CODES ADDITIONS TO THE LISTS OF NATIONAUX FIGURANT SUR LES NATIONAL CODES APPEARING ON FEUILLES DES NORMES DE THE STANDARD SHEETS OF LA PUBLICATION 191-2 DE LA CEI IEC PUBLICATION 191-2 SUPPRESSIONS DANS LES LISTES DELETIONS TO THE LISTS OF DE CODES NATIONAUX FIGURANT NATIONAL CODES APPEARING ON SUR LES FEUILLES DE NORMES DE THE STANDARD SHEETS OF LA PUBLICATION 191-2 DE LA CEI IEC PUBLICATION 191-2 Publication CEI 191-2 Date: 1987 Chapter V Chapitre V IEC Publication 191-2 Date: 1987 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU PRÉAMBULE 60191-2 amend © CEI/IEC:2002 COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE _ Amendement (2002) la CEI 60191-2 (1966) NORMALISATION MÉCANIQUE DES DISPOSITIFS À SEMICONDUCTEURS – Partie 2: Dimensions AVANT-PROPOS 2) Les décisions ou accords officiels de la CEI concernant les questions techniques représentent, dans la mesure du possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux intéressés sont représentés dans chaque comité d’études 3) Les documents produits se présentent sous la forme de recommandations internationales Ils sont publiés comme normes, spécifications techniques, rapports techniques ou guides et agréés comme tels par les Comités nationaux 4) Dans le but d'encourager l'unification internationale, les Comités nationaux de la CEI s'engagent appliquer de faỗon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes nationales et régionales Toute divergence entre la norme de la CEI et la norme nationale ou régionale correspondante doit être indiquée en termes clairs dans cette dernière 5) La CEI n’a fixé aucune procédure concernant le marquage comme indication d’approbation et sa responsabilité n’est pas engagée quand un matériel est déclaré conforme l’une de ses normes 6) L’attention est attirée sur le fait que certains des éléments de la présente Norme internationale peuvent faire l’objet de droits de propriété intellectuelle ou de droits analogues La CEI ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence PRÉFACE À L'AMENDEMENT (2002) Le présent amendement a été établi par le sous-comité 47D: Normalisation mécanique des dispositifs semiconducteurs du comité d'études 47 de la CEI: Dispositifs semiconducteurs Le texte de cette norme est issu des documents suivants: FDIS Rapport de vote 47D/480/FDIS 47D/481/FDIS 47D/491/RVD 47D/492/RVD Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant abouti l'approbation de cette norme Date: 2002 60191-2 IEC I Publication IEC 60191-2 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU 1) La CEI (Commission Électrotechnique Internationale) est une organisation mondiale de normalisation composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI) La CEI a pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de l'électricité et de l'électronique A cet effet, la CEI, entre autres activités, publie des Normes internationales Leur élaboration est confiée des comités d'études, aux travaux desquels tout Comité national intéressé par le sujet traité peut participer Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent également aux travaux La CEI collabore étroitement avec l'Organisation Internationale de Normalisation (ISO), selon des conditions fixées par accord entre les deux organisations 60191-2 Amend © CEI/IEC:2002 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ Amendment (2002) to IEC 60191-2 (1966) MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES – Part 2: Dimensions FOREWORD 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights The IEC shall not be held responsible for identifying any or all such patent rights PREFACE TO AMENDMENT (2002) This amendment has been prepared by subcommittee 47D: Mechanical standardization of semiconductor devices of IEC technical committee 47: Semiconductor devices The text of this standard is based on the following documents: FDIS Report on voting 47D/480/FDIS 47D/481/FDIS 47D/491/RVD 47D/492/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table Date: 2002 60191-2 IEC I Publication IEC 60191-2 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees) The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields To this end and in addition to other activities, the IEC publishes International Standards Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU 60191-2 Amend © IEC:2002 158E021 Serial Number Reference Symbol nom 158E024 max nom 9.0 9.0 9.0 9.0 9.0 1.2 1.2 1.7 84 84 96 96 nD 10 10 10 10 nE 10 10 10 10 Fig.11 Fig.11 Fig.12 Fig.12 ZD [0.9] [0.9] [0.9] [0.9] ZE [0.9] [0.9] [0.9] [0.9] SD 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E025 158E026 158E027 158E028 nom max nom max nom D 9.0 9.0 10.0 E 9.0 9.0 10.0 1.2 1.7 max nom 10.0 10.0 1.2 1.7 n 100 100 72 72 nD 10 10 11 11 10 Ball layout 10 11 11 Fig.13 Fig.13 ZD [0.9] [0.9] [1] [1] ZE [0.9] [0.9] [1] [1] SD 0.4 0.4 0 Fig.14 Fig.14 SE 0.4 0.4 0 b3 0.63 0.63 0.63 0.63 158E029 158E030 158E031 158E032 Serial Number Reference Symbol nom max nom max nom D 10.0 10.0 10.0 E 10.0 10.0 10.0 A 1.7 1.2 max nom 10.0 1.2 1.7 96 96 112 112 nD 11 11 11 11 nE 11 11 11 11 Ball layout Fig.15 Fig.16 Fig.16 ZD [1] [1] [1] [1] ZE [1] [1] [1] [1] SD 0 0 SE 0 0 b3 0.63 0.63 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-f max 10.0 n Fig.15 max Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE max 1.7 n nE Group nom 9.0 A Group 9.0 Reference Symbol Group 158E023 max 9.0 Serial Number Group nom E Ball layout Group D A Group 158E022 max 60191-2 Amend © IEC:2002 158E033 Serial Number Reference Symbol nom 158E036 max nom 11.0 11.0 10.0 11.0 11.0 1.2 1.7 1.2 120 120 80 80 nD 11 11 12 12 nE 11 11 12 Fig.17 Fig.17 12 Fig.18 Fig.18 ZD [1] [1] [1.1] [1.1] ZE [1] [1] [1.1] [1.1] SD 0 0 0 0 b3 0.63 0.63 0.63 0.63 158E037 158E038 158E039 158E040 nom max nom max nom 11.0 11.0 11.0 E 11.0 11.0 11.0 1.7 1.2 max nom 11.0 11.0 1.7 1.2 n 108 108 128 128 nD 12 12 12 12 nE 12 12 12 12 Fig.19 Fig.19 Fig.20 Fig.20 ZD [1.1] [1.1] [1.1] [1.1] ZE [1.1] [1.1] [1.1] [1.1] SD 0 0 SE 0 0 b3 0.63 0.63 0.63 0.63 158E043 158E044 158E041 Serial Number Reference Symbol nom 158E042 max nom max nom D 11.0 11.0 12.0 E 11.0 11.0 12.0 A 1.2 max nom 12.0 1.7 n 140 140 96 96 nD 12 12 14 14 nE 12 12 14 14 Ball layout Fig.21 Fig.21 Fig.22 Fig.22 ZD [1.1] [1.1] [0.8] [0.8] ZE [1.1] [1.1] [0.8] [0.8] SD 0 0.4 0.4 SE 0 0.4 0.4 b3 0.63 0.63 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-g max 12.0 1.2 1.7 max Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE D max 1.7 n Ball layout Group nom 10.0 A Group 10.0 Reference Symbol Group 158E035 max 10.0 Serial Number Group nom E Ball layout Group D A Group 158E034 max 60191-2 Amend © IEC:2002 158E045 Serial Number Reference Symbol nom 12.0 12.0 12.0 1.7 1.2 158E048 max nom 12.0 1.2 1.7 132 132 160 160 nD 14 14 14 14 nE 14 14 14 14 Fig.23 Fig.23 Fig.24 Fig.24 ZD [0.8] [0.8] [0.8] [0.8] ZE [0.8] [0.8] [0.8] [0.8] SD 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E049 nom D 12.0 E 12.0 158E050 max nom 158E051 max 12.0 nom 13.0 12.0 nom 13.0 1.2 1.7 n 180 180 104 104 nD 14 14 15 15 nE 14 14 15 15 Fig.25 Fig.25 Fig.26 Fig.26 ZD [0.8] [0.8] [0.9] [0.9] ZE [0.8] [0.8] [0.9] [0.9] SD 0.4 0.4 0 SE 0.4 0.4 0 b3 0.63 0.63 0.63 0.63 158E053 Serial Number Reference Symbol nom 158E054 max nom D 13.0 13.0 E 13.0 13.0 A 1.2 158E055 max nom 158E056 max nom 13.0 13.0 1.7 1.2 n 144 144 176 176 nD 15 15 15 15 nE 15 15 15 Ball layout 15 Fig.27 Fig.27 Fig.28 Fig.28 ZD [0.9] [0.9] [0.9] [0.9] ZE [0.9] [0.9] [0.9] [0.9] SD 0 0 SE 0 0 b3 0.63 0.63 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-h max 13.0 13.0 1.7 max 13.0 13.0 1.7 1.2 158E052 max Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE max 12.0 n Ball layout Group nom 12.0 A Group 12.0 Serial Number Group 158E047 max 12.0 Reference Symbol Group nom E Ball layout Group D A Group 158E046 max 60191-2 Amend © IEC:2002 158E057 Serial Number Reference Symbol nom D 13.0 E 13.0 A Group nom max 14.0 13.0 14.0 1.7 nom 14.0 1.2 1.7 112 nD 15 15 16 16 nE 15 15 16 16 Fig.29 Fig.29 Fig.30 ZD [0.9] [0.9] [1] ZE [0.9] [0.9] [1] [1] SD 0 0.4 0.4 Fig.30 [1] 0 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E061 158E062 158E063 158E064 nom max nom max nom 14.0 14.0 14.0 E 14.0 14.0 14.0 1.2 1.7 max nom 14.0 14.0 1.2 1.7 n 156 156 192 192 nD 16 16 16 16 nE 16 16 16 16 Fig.31 ZD Fig.31 [1] Fig.32 [1] Fig.32 [1] [1] ZE [1] [1] [1] [1] SD 0.4 0.4 0.4 0.4 SE 0.4 0.4 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E067 158E068 158E065 Serial Number Reference Symbol nom 158E066 max nom max nom D 14.0 14.0 15.0 E 14.0 14.0 15.0 A 1.2 1.7 max nom 15.0 1.2 1.7 220 220 120 120 nD 16 16 17 17 nE 16 16 17 Ball layout Fig.33 Fig.33 Fig.34 Fig.34 ZD [1] [1] [1.1] [1.1] ZE [1] [1] [1.1] [1.1] SD 0.4 0.4 0 17 SE 0.4 0.4 0 b3 0.63 0.63 0.63 0.63 60191 IEC I – 158E-i max 15.0 n P-L&TFBGA 0.8mm pitch OUTLINE FAMILY max Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE D max 14.0 112 Ball layout Group max 13.0 200 A Group nom 158E060 200 Reference Symbol Group 158E059 n Serial Number Group max 1.2 Ball layout Group 158E058 60191-2 Amend © IEC:2002 158E069 Serial Number Reference Symbol nom Group nom 158E072 max nom 15.0 15.0 15.0 15.0 15.0 15.0 1.7 1.2 1.2 168 168 208 208 nD 17 17 17 17 nE 17 17 17 17 Ball layout Fig.35 Fig.35 Fig.36 Fig.36 ZD [1.1] [1.1] [1.1] [1.1] ZE [1.1] [1.1] [1.1] [1.1] SD 0 0 0 0 b3 0.63 0.63 0.63 0.63 158E073 158E074 158E075 nom 15.0 E 15.0 max nom max 15.0 max 1.7 1.2 n 240 240 136 136 nD 17 17 19 19 nE 17 17 19 19 Ball layout Fig.37 Fig.37 Fig.38 Fig.38 ZD [1.1] [1.1] [1] [1] ZE [1.1] [1.1] [1] [1] SD 0 0 SE 0 0 b3 0.63 0.63 0.63 0.63 158E077 Reference Symbol D E nom 158E078 max nom 16.0 16.0 16.0 16.0 A 158E079 max nom 158E080 max 16.0 nom 16.0 1.2 1.7 n 192 192 240 240 nD 19 19 19 19 nE 19 19 19 19 Ball layout Fig.39 Fig.39 Fig.40 Fig.40 ZD [1] [1] [1] [1] ZE [1] [1] [1] [1] SD 0 0 SE 0 0 b3 0.63 0.63 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-j max 16.0 16.0 1.7 1.2 max 16.0 16.0 1.7 nom 16.0 16.0 15.0 1.2 nom 158E076 Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE D max 1.7 n Serial Number Group 15.0 A Group 158E071 max 15.0 Reference Symbol Group nom E Serial Number Group D A Group 158E070 max 60191-2 Amend © IEC:2002 158E081 Serial Number Reference Symbol nom Group nom 16.0 17.0 16.0 17.0 1.7 1.2 158E084 max nom 17.0 1.2 1.7 280 280 144 144 nD 19 19 20 20 nE 19 19 20 20 Ball layout Fig.41 Fig.41 Fig.42 Fig.42 ZD [1] [1] [0.9] [0.9] ZE [1] [1] [0.9] [0.9] SD 0 0.4 0.4 0 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E085 158E086 158E087 158E088 nom 17.0 E 17.0 max nom max 17.0 max 1.7 1.2 n 204 204 256 256 nD 20 20 20 20 nE 20 20 20 20 Ball layout Fig.43 Fig.43 Fig.44 Fig.44 ZD [0.9] [0.9] [0.9] [0.9] ZE [0.9] [0.9] [0.9] [0.9] SD 0.4 0.4 0.4 0.4 SE 0.4 0.4 0.4 0.4 b3 0.63 0.63 0.63 0.63 158E089 158E090 158E091 158E092 Reference Symbol nom D 17.0 E 17.0 A max nom max 17.0 nom max 18.0 17.0 nom 18.0 1.2 1.7 n 300 300 152 152 nD 20 20 21 21 nE 20 20 21 21 Ball layout Fig.45 Fig.45 Fig.46 Fig.46 ZD [0.9] [0.9] [0.8] [0.8] ZE [0.9] [0.9] [0.8] [0.8] SD 0.4 0.4 0 SE 0.4 0.4 0 b3 0.63 0.63 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-k max 18.0 18.0 1.7 1.2 max 17.0 17.0 1.7 nom 17.0 17.0 17.0 1.2 nom Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE D max 17.0 n Serial Number Group 16.0 A Group 158E083 max 16.0 Reference Symbol Group nom E Serial Number Group D A Group 158E082 max 60191-2 Amend © IEC:2002 158E093 Serial Number Reference Symbol nom Group 158E095 max nom 158E096 max nom 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 1.7 1.2 1.2 216 216 272 272 nD 21 21 21 21 nE 21 21 21 21 Ball layout Fig.47 Fig.47 Fig.48 Fig.48 ZD [0.8] [0.8] [0.8] [0.8] ZE [0.8] [0.8] [0.8] [0.8] SD 0 0 0 0 b3 0.63 0.63 0.63 0.63 nom D 18.0 E 18.0 A 158E098 max nom max 18.0 18.0 1.2 1.7 n 320 320 nD 21 21 nE 21 21 Ball layout Fig.49 Fig.49 ZD [0.8] [0.8] ZE [0.8] [0.8] SD 0 SE 0 b3 0.63 0.63 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-l Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU SE 158E097 max 1.7 n Reference Symbol Group nom E Serial Number Group D A Group 158E094 max 60191-2 Amend © IEC:2002 Fig.3 Fig Fig.10 Fig.2 Fig Fig.7 Fig.11 Fig Fig.8 Fig.12 Fig.9 Fig.13 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-m Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Fig.1 60191-2 Amend © IEC:2002 Fig.18 Fig.22 Fig.26 Fig.15 Fig.19 Fig.23 Fig.27 Fig.16 Fig.20 Fig.24 Fig.28 Fig.17 Fig.21 Fig.25 Fig.29 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-n Date: 2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Fig.14 60191-2 Amend © IEC:2002 Fig.34 Fig.38 Fig.31 Fig.35 Fig.39 Fig.32 Fig.33 Fig.36 Fig.37 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-o LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Fig.30 Fig.40 Fig.41 Date: 2002 60191-2 Amend © IEC:2002 Fig.46 Fig.43 Fig.47 Fig.44 Fig.48 Fig.45 Fig.49 P-L&TFBGA 0.8mm pitch OUTLINE FAMILY 60191 IEC I – 158E-p LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Fig.42 Date: 2002 60191-2 Amend © CEI/IEC:2002 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Note ( ) ( 2) (1) Seating plane (2) Base plane (3) Specifies the vertical shift of the flat part of each terminal from the seating plane (4) Shows the allowable position of the index mark, which must be included in the shaded area entirely SOJ (Small Outline J-lead package) 0.80 mm pitch 60191 IEC I-163E-a Date: 2002 60191-2 Amend © CEI/IEC:2002 163E01 Ref E MIN 10.00 NOM 10.15 D 18.25 A 3.25 3.50 A1 0.64 0.90 A2 2.05 163E02 MAX 10.30 MIN 10.00 NOM 10.15 18.80 20.40 3.75 3.25 3.50 0.64 0.90 163E03 MAX 10.30 MIN 10.00 NOM 10.15 21.40 28.45 3.75 3.25 3.50 0.64 0.90 29.00 3.75 2.05 2.05 0.50* 0.50* 0.50* e 0.80(*) 0.80(*) 0.80(*) 1.27 1.27 1.27 0.89 0.89 d2 0.89 Lp 1.45 1.75 1.45 1.75 1.45 1.75 b 0.25 0.40 0.25 0.40 0.25 0.40 b1 0.43 0.47 0.51 0.43 0.47 0.51 0.43 0.47 0.51 b2 0.25 0.30 0.35 0.25 0.30 0.35 0.25 0.30 0.35 c 0.15 0.25 0.15 0.25 0.15 c1 0.15 0.22 0.15 0.22 0.15 0.20 0.20 0.22 0.17 0.17 0.17 t 0.20 0.25 x 0.15 0.15 0.15 y 0.10 0.10 0.10 HE 11.05 11.20 11.30 11.05 11.20 11.30 11.05 11.20 eE 9.40* 9.40* 9.40* n 44 50 70 SOJ (Small Outline J-lead package) 0.80 mm pitch 60191 IEC I-163E-b Date: 2002 11.30 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU A3 d1 MAX 10.30 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU ISBN 2-8318-6101-2 -:HSMINB=][VUVW: ICS 31.080.01 Typeset and printed by the IEC Central Office GENEVA, SWITZERLAND