Bsi bs en 61995 2 2009

Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 BSI Standards Publication Devices for the connection of luminaires for household and similar purposes — Part 2: Standard sheets for DCL NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide™ BRITISH STANDARD Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 National foreword This British Standard is the UK implementation of EN 61995-2:2009 It is identical to IEC 61995-2:2009 The UK participation in its preparation was entrusted to Technical Committee PEL/23, Electrical accessories A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © BSI 2010 ISBN 978 580 57058 ICS 29.120.20; 29.140.40 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010 Amendments issued since publication Amd No Date 标准分享网 www.bzfxw.com 免费下载 Text affected Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 EUROPEAN STANDARD EN 61995-2 NORME EUROPÉENNE May 2009 EUROPÄISCHE NORM ICS 29.120.20; 29.140.40 English version Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL (IEC 61995-2:2009) Dispositifs de connexion pour luminaires pour usage domestique et analogue Partie 2: Feuilles de norme pour DCL (CEI 61995-2:2009) Betriebsmittel für den Anschluss von Leuchten für Haushalt und ähnliche Zwecke Teil 2: Normblätter für Betriebsmittel zum Anschluss einer Leuchte (IEC 61995-2:2009) ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ This European Standard was approved by CENELEC on 2009-04-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brussels © 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 61995-2:2009 E Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 EN 61995-2:2009 –2– Foreword The text of document 23B/919/FDIS, future edition of IEC 61995-2, prepared by SC 23B, Plugs, socket-outlets and switches, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61995-2 on 2009-04-01 This European Standard is to be read in conjunction with EN 61995-1 The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-01-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2019-04-01 Annexes ZA and ZB have been added by CENELEC Endorsement notice The text of the International Standard IEC 61995-2:2009 was approved by CENELEC as a European Standard without any modification ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ 标准分享网 www.bzfxw.com 免费下载 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 –3– EN 61995-2:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies Publication Year Title EN/HD Year IEC 61995-1 (mod) 2005 Devices for the connection of luminaires for household and similar purposes Part 1: General requirements EN 61995-1 2008 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 EN 61995-2:2009 –4– Annex ZB (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g climatic conditions, electrical earthing conditions NOTE If it affects harmonization, it forms part of the European Standard For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative Clause Special national condition Finland Figure DCL outlets shall be provided with a hook ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ 标准分享网 www.bzfxw.com 免费下载 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 –2– 61995-2 © IEC:2009 CONTENTS Scope .5 Normative references .5 Requirements and tests Standard sheets .5 Figure – Example of use of a DCL socket and a DCL plug inserted in a flush type box in a ceiling 11 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 61995-2 © IEC:2009 –5– DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES – Part 2: Standard sheets for DCL Scope This part of IEC 61995, which is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, A a.c intended for household and similar purposes, for the electrical connection to final circuits rated not more than 16 A, without providing mechanical support for the luminaire Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 61995-1:2005, Devices for the connection of luminaires for household and similar purposes – Part 1: General requirements ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ Requirements and tests Devices for the connection of luminaires shall comply with all the relevant requirements of Part (IEC 61995-1) In particular, – devices for the connection of luminaires classified according to 7.1 a) in Part shall comply with the relevant standard sheets of this Part 2; – these devices require provision of information in accordance with Subclause 8.3 of Part 1; – these devices shall comply with Clause 20 of Part with the following modification Replacement of the last two paragraphs in Clause 20 of Part by the following new paragraph: In no single movement shall the force required to insert or withdraw the plug exceed 50 N nor shall it be less than 10 N Standard sheets This part contains the following Standard Sheets: Standard Sheet 1-1: DCL outlet, A 250 V a.c P + E Standard Sheet 1-2: DCL plug, A 250 V a.c P + E Standard Sheet 1-3: DCL plug, A 250 V a.c P Standard sheet 1-4: Gauge for testing DCL plug functions This part of IEC 61995 contains also an example of the use of the above DCL inserted in a flush type box in a ceiling (see Figure 1) 标准分享网 www.bzfxw.com 免费下载 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 –6– 61995-2 © IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-1 DCL OUTLET A 250 V a.c P + Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ IEC Radius without dimensions: 0,5 mm max This dimension concerns only the flush type DCL outlet The overall dimension of the DCL outlet shall be less than or equal to 40 mm Entry holes slightly rounded or sloped to ensure an easy introduction of the pins of the DCL plug Angle 0,5° +0,5° concerns also chamfers 0° 136/09 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 61995-2 © IEC:2009 –7– DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-2 DCL PLUG A 250 V a.c P + Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ IEC 137/09 Radius without dimensions: 0,5 mm This part shall be resilient The section of the pins of the DCL plug shall have the same dimensions The retention means shall be designed by the DCL plug manufacturer to ensure the withdrawal force according to Clause The DCL plug shall enter without undue force into the gauge, representing the smallest possible entry hole The pins of the DCL plug shall be slightly rounded or sloped to ensure their easy introduction in the entry holes of the DCL outlet This dimension shall be kept within mm from the reference face C 标准分享网 www.bzfxw.com 免费下载 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 –8– 61995-2 © IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-3 DCL PLUG A 250 V a.c P Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ IEC 138/09 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 61995-2 © IEC:2009 –9– Radius without dimensions : 0,5 mm This part shall be resilient The section of the pins of the DCL plug shall have the same dimensions The retention means shall be designed by the DCL plug manufacturer to ensure the withdrawal force according to Clause The DCL plug shall enter without undue force into the gauge, representing the smallest possible entry hole The pins of the DCL plug shall be slightly rounded or sloped to ensure their easy introduction in the entry holes of the DCL outlet This dimension shall be kept within mm from the reference face C This dummy pin shall be of insulating material These dimensions apply to L and N pins ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ 标准分享网 www.bzfxw.com 免费下载 61995-2 © IEC:2009 – 10 – DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-4 Gauge for testing DCL plug functions Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability SECTION: A-A SECTION:B-B 0,5° ±0,03° 0,5 ° ° ± ,0 ±0,1 x 30° D 0,5° ±0,03° 0,5° ±0,03° 6,35 -0,02 C 24,3 +0,02 F 10 15,2 -0,02 7,8 +0,02 C C 9,25 +0,01 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ entry hole 1,05 +0,02 +0,01 0,01 C A B 3,35 -0,01 B entry hole 0,01 C A B 7,5 7,5 30,3 ±0,01 SECTION: C-C 0,01 A DETAIL: D DETAIL: F A 4,5 ±0,01 A 1.25 +0.02 +0 ±0.1 chamfers 30° R 0,5 in the edges +0,1° chamfers 0,5° +- 0,03° conic +0,05 B 10,5 ±0,01 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 A 0,01 C 0,01 C 12,9 ±0,01 B 0,1 max chamfered or rounded IEC 139/09 PURPOSE: To check compliance of the outside dimensions of the DCL plug, flexibility and snap-in function of the retaining means, the withdrawal force of the DCL plug caused by the retaining mean, position and alignment of the pins of the DCL plug TESTING: described in the requirements Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI BS EN 61995-2:2009 61995-2 © IEC:2009 – 11 – ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ Figure – Example of use of a DCL socket and a DCL plug inserted in a flush type box in a ceiling _ 标准分享网 www.bzfxw.com 免费下载 IEC 140/09 Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ This page deliberately left blank Licensed Copy: athen reading, Reading University Library, 23/01/2010 05:50, Uncontrolled Copy, (c) BSI British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions Information on standards British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI provides a wide range of information on national, European and international standards through its Knowledge Centre BSI offers Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: knowledgecentre@bsigroup.com Various BSI electronic information services are also available which give details on all its products and services Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: plus@bsigroup.com Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website www.bsigroup.com/shop In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at www.bsigroup.com/standards Copyright Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright & Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards raising standards worldwide™ 标准分享网 www.bzfxw.com 免费下载