BS EN 62325-451-5:2015 BSI Standards Publication Framework for energy market communications Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market BRITISH STANDARD BS EN 62325-451-5:2015 National foreword This British Standard is the UK implementation of EN 62325-451-5:2015 It is identical to IEC 62325-451-5:2015 The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2015 Published by BSI Standards Limited 2015 ISBN 978 580 85016 ICS 33.200 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2015 Amendments/corrigenda issued since publication Date Text affected BS EN 62325-451-5:2015 EUROPEAN STANDARD EN 62325-451-5 NORME EUROPÉENNE EUROPÄISCHE NORM April 2015 ICS 33.200 English Version Framework for energy market communications - Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market (IEC 62325-451-5:2015) Cadre pour les communications pour le marché de l'énergie - Partie 451-5: Processus métier d'énoncé de problème et de demande de position, modèles contextuels et modèles d'assemblage pour le marché européen (IEC 62325-451-5:2015) Kommunikation im Energiemarkt - Teil 451-5: Problemstellungs- und Status-AnfragenGeschäftsprozesse, kontextbezogene Modelle und Einbindungsmodelle für den europäischen Markt (IEC 62325-451-5:2015) This European Standard was approved by CENELEC on 2015-03-24 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members Ref No EN 62325-451-5:2015 E BS EN 62325-451-5:2015 EN 62325-451-5:2015 -2- Foreword The text of document 57/1518/FDIS, future edition of IEC 62325-451-5, prepared by IEC/TC 57 "Power systems management and associated information exchange" was submitted to the IECCENELEC parallel vote and approved by CENELEC as EN 62325-451-5:2015 The following dates are fixed: – latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-12-24 – latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-03-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights Endorsement notice The text of the International Standard IEC 62325-451-5:2015 was approved by CENELEC as a European Standard without any modification In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61968-11 NOTE Harmonized as EN 61968-11 IEC 61970-301 NOTE Harmonized as EN 61970-301 IEC 62325-451-2 NOTE Harmonized as EN 62325-451-2 IEC 62325-451-3 NOTE Harmonized as EN 62325-451-3 BS EN 62325-451-5:2015 EN 62325-451-5:2015 -3- Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies NOTE Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC TS 61970-2 - - - IEC 62325-301 - EN 62325-301 - IEC 62325-351 - EN 62325-351 - IEC 62325-450 - EN 62325-450 - IEC 62325-451-1 - EN 62325-451-1 - IEC 62361-100 - Energy management system application program interface (EMS-API) Part 2: Glossary Framework for energy market communications -Part 301: Common Information Model (CIM) extensions for markets Framework for energy market communications -Part 351: CIM European market model exchange profile Framework for energy market communications -Part 450: Profile and context modelling rules Framework for energy market communications -Part 451-1: Acknowledgement business process and contextual model for CIM European market Power systems managment and associated information exchange Interoperability in the long term -Part 100: CIM profiles to XML schema mapping - - –2– BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 CONTENTS INTRODUCTION Scope Normative references Terms and definitions 10 Document contextual model and message assembly model basic concepts 11 4.1 4.2 4.3 4.4 4.5 The Overview 11 European style market package structure 12 From the European style market profile to the document contextual model 14 From the document contextual model to the message assembly model 14 From the assembly model to the XML schema 14 problem statement and status request business process 14 5.1 Business context for the problem statement process 14 5.2 Business context for the status request process 15 5.2.1 Overview of the status request process 15 5.2.2 Use case for the status request process 15 5.2.3 Sequence diagrams for the status request process 16 5.3 Business rules 18 5.3.1 General 18 5.3.2 Business rules for the problem statement process 18 5.3.3 Business rules for the status request process 18 Contextual and assembly models 18 6.1 Problem statement contextual model 18 6.1.1 Overview of the model 18 6.1.2 IsBasedOn relationships from the European style market profile 19 6.1.3 Detailed Problem statement contextual model 19 6.2 Problem statement assembly model 25 6.2.1 Overview of the model 25 6.2.2 IsBasedOn relationships from the European style market profile 25 6.2.3 Detailed Problem statement assembly model 25 6.2.4 Datatypes 28 6.2.5 Enumerations 32 6.3 Status request contextual model 32 6.3.1 Overview of the model 32 6.3.2 IsBasedOn relationships from the European style market profile 33 6.3.3 Detailed Status request contextual model 33 6.4 Status request assembly model 36 6.4.1 Overview of the model 36 6.4.2 IsBasedOn relationships from the European style market profile 36 6.4.3 Detailed Status request assembly model 36 6.4.4 Datatypes 38 6.4.5 Enumerations 40 XML schema 41 7.1 7.2 XML schema URN namespace rules 41 Code list URN namespace rules 41 BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 –3– 7.3 URI rules for model documentation 41 7.3.1 Datatype 41 7.3.2 Class 42 7.3.3 Attribute 42 7.3.4 Association end role name 42 7.4 ProblemStatement_MarketDocument schema 43 7.4.1 Schema Structure 43 7.4.2 Schema description 44 7.5 StatusRequest_MarketDocument schema 47 7.5.1 Schema Structure 47 7.5.2 Schema description 48 Bibliography 50 Figure – IEC 62325-450 modelling framework 12 Figure – Overview of European style market profile dependency 13 Figure – Problem statement business case 14 Figure – Status request business case 16 Figure – Status request scenario 17 Figure – Status request scenario 17 Figure – Problem statement contextual model 19 Figure – Problem statement assembly model 25 Figure – Status request contextual model 33 Figure 10 – Status request assembly model 36 Figure 11 – ProblemStatement_MarketDocument XML schema structure 43 Figure 12 – StatusRequest_MarketDocument XML schema structure 47 Table – IsBasedOn dependency 19 Table – Attributes of Problem statement contextual model::ProblemStatement_MarketDocument 20 Table – Association ends of Problem statement contextual model::ProblemStatement_MarketDocument with other classes 20 Table – Attributes of Problem statement contextual model::Delivery_MarketDocument 21 Table – Attributes of Problem statement contextual model::Domain 21 Table – Attributes of Problem statement contextual model::MarketDocument 22 Table – Association ends of Problem statement contextual model::MarketDocument with other classes 22 Table – Attributes of Problem statement contextual model::MarketParticipant 22 Table – Association ends of Problem statement contextual model::MarketParticipant with other classes 23 Table 10 – Attributes of Problem statement contextual model::MarketRole 23 Table 11 – Attributes of Problem statement contextual model::Process 23 Table 12 – Attributes of Problem statement contextual model::Reason 24 Table 13 – Attributes of Problem statement contextual model::Time_Period 24 Table 14 – IsBasedOn dependency 25 –4– BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 Table 15 – Attributes of Problem statement assembly model::ProblemStatement_MarketDocument 26 Table 16 – Association ends of Problem statement assembly model::ProblemStatement_MarketDocument with other classes 27 Table 17 – Attributes of Problem statement assembly model::Reason 27 Table 18 – Attributes of ESMPDataTypes::ESMP_DateTimeInterval 28 Table 19 – Attributes of ESMPDataTypes::AreaID_String 28 Table 20 – Restrictions of attributes for ESMPDataTypes::AreaID_String 28 Table 21 – Attributes of ESMPDataTypes::ESMP_DateTime 28 Table 22 – Restrictions of attributes for ESMPDataTypes::ESMP_DateTime 29 Table 23 – Attributes of ESMPDataTypes::ESMPVersion_String 29 Table 24 – Restrictions of attributes for ESMPDataTypes::ESMPVersion_String 29 Table 25 – Attributes of ESMPDataTypes::ID_String 30 Table 26 – Restrictions of attributes for ESMPDataTypes::ID_String 30 Table 27 – Attributes of ESMPDataTypes::MarketRoleKind_String 30 Table 28 – Attributes of ESMPDataTypes::MessageKind_String 30 Table 29 – Attributes of ESMPDataTypes::PartyID_String 31 Table 30 – Restrictions of attributes for ESMPDataTypes::PartyID_String 31 Table 31 – Attributes of ESMPDataTypes::ProcessKind_String 31 Table 32 – Attributes of ESMPDataTypes::ReasonCode_String 31 Table 33 – Attributes of ESMPDataTypes::ReasonText_String 31 Table 34 – Restrictions of attributes for ESMPDataTypes::ReasonText_String 32 Table 35 – Attributes of ESMPDataTypes::YMDHM_DateTime 32 Table 36 – Restrictions of attributes for ESMPDataTypes::YMDHM_DateTime 32 Table 37 – IsBasedOn dependency 33 Table 38 – Attributes of Status request contextual model::StatusRequest_MarketDocument 33 Table 39 – Association ends of Status request contextual model::StatusRequest_MarketDocument with other classes 34 Table 40 – Attributes of Status request contextual model::AttributeInstanceComponent 34 Table 41 – Attributes of Status request contextual model::MarketParticipant 35 Table 42 – Association ends of Status request contextual model::MarketParticipant with other classes 35 Table 43 – Attributes of Status request contextual model::MarketRole 35 Table 44 – IsBasedOn dependency 36 Table 45 – Attributes of Status request assembly model::StatusRequest_MarketDocument 37 Table 46 – Association ends of Status request assembly model::StatusRequest_MarketDocument with other classes 37 Table 47 – Attributes of Status request assembly model::AttributeInstanceComponent 38 Table 48 – Attributes of ESMPDataTypes::AttributeValue_String 38 Table 49 – Restrictions of attributes for ESMPDataTypes::AttributeValue_String 38 Table 50 – Attributes of ESMPDataTypes::ESMP_DateTime 38 Table 51 – Restrictions of attributes for ESMPDataTypes::ESMP_DateTime 39 Table 52 – Attributes of ESMPDataTypes::ID_String 39 BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 –5– Table 53 – Restrictions of attributes for ESMPDataTypes::ID_String 39 Table 54 – Attributes of ESMPDataTypes::MarketRoleKind_String 40 Table 55 – Attributes of ESMPDataTypes::MessageKind_String 40 Table 56 – Attributes of ESMPDataTypes::PartyID_String 40 Table 57 – Restrictions of attributes for ESMPDataTypes::PartyID_String 40 –8– BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 INTRODUCTION This standard is one of the IEC 62325 series which define protocols for deregulated energy market communications The principal objective of the IEC 62325 series of standards is to produce standards which facilitate the integration of market application software developed independently by different vendors into a market management system, between market management systems and market participant systems This is accomplished by defining message exchanges to enable these applications or systems access to public data and exchange information independent of how such information is represented internally The common information model (CIM) specifies the basis for the semantics for this message exchange The European style market profile is based on different parts of the CIM IEC standard The CIM is defined through a series of standards, i.e IEC 62325-301, IEC 61970-301 and IEC 61968-11 standards This document provides for the European style market profile the problem statement and status request business processes that can be used throughout a European style market This standard was originally based upon the work of the European Transmission System Operators (ETSO) Task Force EDI (Electronic Data Interchange) and then on the work of the European Network of Transmission System Operators (ENTSO-E) Working Group EDI BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 38 – Table 47 – Attributes of Status request assembly model::AttributeInstanceComponent mult Attribute name Attribute type Description [1 1] attribute String The requested attribute identifies the significance of the content of the requested attribute value It is a string value that represents a copy of the elementTag of the electronic document for which the status is being requested In addition the following reserved names may be used RequestedReturnDocumentType; Identification of a particular document that is expected as a reply, for example the merit order list document DateAndOrTime; The requests can be made for a specific date, and or Date Time, for example, it can be used for the outage document The identification of an attribute for a given request component [1 1] attributeValue AttributeValue_String Each requested attribute component has associated with it a value that is identified in the requested attribute value attribute The value of a given component 6.4.4 Datatypes 6.4.4.1 AttributeValue_String datatype The coded identification of a given component Table 48 shows all attributes of AttributeValue_String Table 48 – Attributes of ESMPDataTypes::AttributeValue_String mult Attribute name Attribute type Description [0 1] codingScheme CodingSchemeTypeList DomainQualification [1 1] value String Main Core value Space Table 49 shows all restrictions applied to the attributes of AttributeValue_String Table 49 – Restrictions of attributes for ESMPDataTypes::AttributeValue_String Name value 6.4.4.2 Constraint maxLength Type OCL Expression of constraint inv: self->MaxLength(150) ESMP_DateTime datatype In ESMP, the dateTime shall be expressed in UTC as YYYY-MM-DDThh:mm:ssZ Table 50 shows all attributes of ESMP_DateTime Table 50 – Attributes of ESMPDataTypes::ESMP_DateTime mult [1 1] Attribute name value Attribute type DateTime Description Main Core value Space BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 39 – Table 51 shows all restrictions applied to the attributes of ESMP_DateTime Table 51 – Restrictions of attributes for ESMPDataTypes::ESMP_DateTime Name value 6.4.4.3 Constraint pattern Type OCL Expression of constraint inv: self->Pattern(((([0-9]{4})[\-](0[13578]|1[02])[\](0[1-9]|[12][0-9]|3[01])|([0-9]{4})[\]((0[469])|(11))[\-](0[1-9]|[12][0-9]|30))T(([01][09]|2[0-3]):[0-5][0-9]:[0-5][09])Z)|(([13579][26][02468][048]|[13579][01345789] (0)[48]|[13579][01345789][2468][048]|[02468][048] [02468][048]|[02468][1235679](0)[48]|[02468][123 5679][2468][048]|[0-9][0-9][13579][26])[\-](02)[\](0[1-9]|1[0-9]|2[0-9])T(([01][0-9]|2[0-3]):[0-5][09]:[0-5][09])Z)|(([13579][26][02468][1235679]|[13579][01345 789](0)[01235679]|[13579][01345789][2468][12356 79]|[02468][048][02468][1235679]|[02468][123567 9](0)[01235679]|[02468][1235679][2468][1235679] |[0-9][0-9][13579][01345789])[\-](02)[\-](0[1-9]|1[09]|2[0-8])T(([01][0-9]|2[0-3]):[0-5][0-9]:[0-5][09])Z)) ID_String datatype A code to uniquely distinguish one occurrence of an entity from another In the ESMP context, the code is defined either by: – an authorized issuing office that provides an agreed identification coding scheme for market participant, domain, measurement point, resources (generator, lines, substations, etc.) identification – an emitting company that provides an agreed identification unique within a business context such as capacity auction identification, market agreement identification, etc – a party (originator of the exchange) that provides a unique identification in the framework of a business exchange such as document identification, time series identification, bid identification, Table 52 shows all attributes of ID_String Table 52 – Attributes of ESMPDataTypes::ID_String mult [1 1] Attribute name value Attribute type String Description Main Core value Space Table 53 shows all restrictions applied to the attributes of ID_String Table 53 – Restrictions of attributes for ESMPDataTypes::ID_String Name value 6.4.4.4 Constraint maxLength Type OCL Expression of constraint inv: self->MaxLength(35) MarketRoleKind_String datatype The identification of the role played by a party Table 54 shows all attributes of MarketRoleKind_String BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 40 – Table 54 – Attributes of ESMPDataTypes::MarketRoleKind_String mult [1 1] 6.4.4.5 Attribute name value Attribute type RoleTypeList Description Main Core value Space MessageKind_String datatype The coded type of a document Table 55 shows all attributes of MessageKind_String Table 55 – Attributes of ESMPDataTypes::MessageKind_String mult [1 1] 6.4.4.6 Attribute name value Attribute type MessageTypeList Description Main Core value Space PartyID_String datatype The identification of an actor in the energy market In the ESMP context, it is an authorized issuing office that provides an agreed identification coding scheme for market participant identification Table 56 shows all attributes of PartyID_String Table 56 – Attributes of ESMPDataTypes::PartyID_String mult Attribute name Attribute type Description [1 1] codingScheme CodingSchemeTypeList DomainQualification [1 1] value String Main Core value Space Table 57 shows all restrictions applied to the attributes of PartyID_String Table 57 – Restrictions of attributes for ESMPDataTypes::PartyID_String Name value 6.4.5 Constraint maxLength Type OCL Expression of constraint inv: self->MaxLength(16) Enumerations The list of enumerations used for the Status request assembly model is as follows: • CodingSchemeTypeList • MessageTypeList • RoleTypeList BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 41 – XML schema 7.1 XML schema URN namespace rules In order to provide a generic and stable means of declaring a URN for the European style market profile XML schemas, the namespace will be composed in the following manner: urn:iec62325.351:tc57wg16:::: where: • iec62325.351 shall be the stem of all European style market profile XML schema namespaces • tc57wg16 identifies the organisation or group of organisations within IEC that own the object being referenced In the case of TC57 this shall be the WG16 • identifies the specific process where the object is situated, e.g the part of the IEC 62325 standards in which the XML schema is defined, e.g 451-1, 451-2, 451-3, etc • identifies the electronic document schema • identifies the version of the document schema • identifies the release of the document schema Every XML schema representing an electronic document shall have a default namespace corresponding to the namespace that identifies the document and respects the above URI namespace construction Every XML schema representing an electronic document shall have a targetNamespace corresponding to the default namespace Every XML schema shall have an elementFormDefault as “qualified” Every XML schema shall have an attributeFormDefault as “unqualified” 7.2 Code list URN namespace rules In the case of the codelist library that shall be used for the European style market profile the URN shall be as follows urn:entsoe.eu:wgedi:codelists 7.3 URI rules for model documentation 7.3.1 Datatype All the datatypes are documented in IEC 62325-351 In the case of the base datatype library that shall be used for the European style market profile, the URI shall use the sawsdl:modelReference as follows: http://iec.ch/TC57//CIM-schema-#[datatype-name] where: • is the year of the released CIM version used for generating market profile • is the CIM version name • [datatype-name] is the name of the CIM datatype or primitive Examples: – 42 – BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 http://iec.ch/TC57/2012/CIM-schema-cim16#String http://iec.ch/TC57/2012/CIM-schema-cim16#Money 7.3.2 Class In the case of the base class library that shall be used for the European style market profile, the URI shall use the sawsdl:modelReference as follows: http://iec.ch/TC57//CIM-schema-#[class-name] where: • is the year of the released CIM version used for generating market profile • is the CIM version name • [class-name] is the name of the CIM class Example: http://iec.ch/TC57/2012/CIM-schema-cim16#TimeSeries 7.3.3 Attribute In the case of the base attribute library that shall be used for the European style market profile, the URI shall use the sawsdl:modelReference as follows: http://iec.ch/TC57//CIM-schema-#[class-name].[attributename] where: • is the year of the released CIM version used for generating market profile • is the CIM version name • [class-name] is the name of the CIM class • [attribute-name] is the name of a class attribute Example: http://iec.ch/TC57/2012/CIM-schema-cim16#TimeSeries.product 7.3.4 Association end role name In the case of the base association library that shall be used for the European style market profile, the URI shall use the sawsdl:modelReference as follows: http://iec.ch/TC57//CIM-schema-#[class-name].[associationend-role-name] where: • is the year of the released CIM version used for generating market profile • is the CIM version name • [class-name] is the name of the CIM class • [association-end-role-name] Example: http://iec.ch/TC57/2012/CIM-schema-cim16#MarketDocument.TimeSeries BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 7.4 7.4.1 – 43 – ProblemStatement_MarketDocument schema Schema Structure Figure 11 provides the structure of the schema IEC Figure 11 – ProblemStatement_MarketDocument XML schema structure – 44 – 7.4.2 BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 Schema description BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 45 – – 46 – BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 7.5 7.5.1 – 47 – StatusRequest_MarketDocument schema Schema Structure Figure 12 provides the structure of the schema IEC Figure 12 – StatusRequest_MarketDocument XML schema structure – 48 – 7.5.2 BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 Schema description BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 – 49 – – 50 – BS EN 62325-451-5:2015 IEC 62325-451-5:2015 © IEC 2015 Bibliography IEC 61968-11, Application integration at electric utilities – System interfaces for distribution management – Part 11: Common information model (CIM) extensions for distribution IEC 61970-301, Energy management system application program interface (EMS-API) – Part 301: Common information model (CIM) base IEC 62325-451-2, Framework for energy market communications – Part 451-2: Scheduling business process and contextual model for CIM European market IEC 62325-451-3, Framework for energy market communications – Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market ISO/TS 15000-5:2005, Electronic Business Extensible Markup Language (ebXML) – Part 5: ebXML Core Components Technical Specification, Version 2.01 (ebCCTS) UN/ECE Recommendation INTERNATIONAL TRADE 20, CODES FOR UNITS OF UN/CEFACT, Unified Context Methodology Technical Specification _ MEASURE USED IN This page deliberately left blank NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Institution (BSI) BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services BSI is incorporated by Royal Charter British Standards and other standardization products are published by BSI Standards Limited About us Revisions We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions Our British Standards and other publications are updated by amendment or revision The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process Organizations of all sizes and across all sectors choose standards to help them achieve their goals Information on standards We can provide you with the knowledge that your organization needs to succeed Find out more about British Standards by visiting our website at bsigroup.com/standards or contacting our Customer Services team or Knowledge Centre Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at bsigroup.com/shop, where hard copies can also be purchased If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team Subscriptions Our range of subscription services are designed to make using standards easier for you For further information on our subscription products go to bsigroup.com/subscriptions With British Standards Online (BSOL) you’ll have instant access to over 55,000 British and adopted European and international standards from your desktop It’s available 24/7 and is refreshed daily so you’ll always be up to date You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member PLUS is an updating service exclusive to BSI Subscribing Members You will automatically receive the latest hard copy of your standards when they’re revised or replaced To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit bsigroup.com/shop With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet Licences can cover as few or as many users as you wish With updates supplied as soon as they’re available, you can be sure your documentation is current For further information, email bsmusales@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK We continually improve the quality of our products and services to benefit your business If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI Details and advice can be obtained from the Copyright & Licensing Department Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions Tel: +44 845 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing Tel: +44 20 8996 7070 Email: copyright@bsigroup.com