Bsi bs en 61970 456 2013 + a1 2016

BS EN 6197B0S-4EN566:21091730+-4A516::22001136 BSI Standards Publication Energy management system application program interface (EMS-API) Part 456: Solved power system state profiles BS EN 61970-456:2013+A1:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 61970-456:2013+A1:2016 It is identical to IEC 61970-456:2013, incorporating amendment 1:2015 It supersedes BS EN 61970-456:2013 which is withdrawn The start and finish of text introduced or altered by amendment is indicated in the text by tags Tags indicating changes to IEC text carry the number of the IEC amendment For example, text altered by IEC amendment is indicated by  The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2016 Published by BSI Standards Limited 2016 ISBN 978 580 87710 ICS 33.200 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2013 Amendments/corrigenda issued since publication Date Text affected 29 February 2016 Implementation of IEC amendment 1:2015 with CENELEC endorsement A1:2016 EUROPEAN STANDARD BS EN 61970-456:2013 NORME EUROPÉENNE EUROPÄISCHE NORM EN 61970-456:2013+A1 ICS 33.200 JAaunguuasrty22001136 English version Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles (IEC 61970-456:2013) Interface de programmation d'application Schnittstelle für Anwendungsprogramme pour système de gestion d'énergie für Netzführungssysteme (EMS-API) - (EMS-API) - Teil 456: Globale Stabilitätsbeurteilung Partie 456: Profils d'état de réseaux (IEC 61970-456:2013) électriques résolus (CEI 61970-456:2013) This European Standard was approved by CENELEC on 2013-06-11 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels © 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 61970-456:2013 E BENS E61N967109-47506-4:25061:23013 - - BENS E61N967109-47506-4:25061:23013+A1:2016 - - EN 61970-456:2013+A1:2016 – – EN 61970-456:2013/A1:2016 Foreword FFoorerewwoordrd The text of document 57/1327/FDIS, fEutuurreoepdeitaionn f1ooref wIEoCr6d1970-456, prepared by IEC TC 57 "Power sTyhsetetmexst omf adnoacguemmeennt t57a/n1d32a7s/FsoDcISia,tefudtuirnefoermditaiotinon1 eoxfcIhEaCng6e1"97w0a-4s56s,upbrmeipttaerdedtobythIEeCIETCC-C57EN"PEoLwEeCr psTyahsreatellmteelsxvtomtoeaf andnaodgceaumpmpeernontvtead5n7db/y1a5Cs9sE1oN/cFEiDaLtIeESdC, fainusftouErmeNa6et1ido9int7io0en-x4c51h6a:o2nf0g1eI3E".Cw6a1s97s0u-b4m56itt:e2d01t3o/At1h,e pIrEeCpa-CreEdNEbLyEC pIEaCra/TlleCl v5o7te"Paonwdearpspyrsotveemdsbmy aCnEaNgEemLEeCntaasnEdNas6s1o9c7ia0t-e4d56in:2fo0r1m3a tion exchange" was submitted to the TIEhCe-CfoElloNwEinLgECdapteasraallreel vfioxteeda: nd approved by CENELEC as EN 61970-456:2013/A1:2016 The following dates are fixed: (dop) 2014-03-11 T• helfaotleloswt dinagtedbaytews haircehftixhedd:ocument has • tlaotebset idmaptelembyewntheidchathneatdioncaulmleevnet lhbays (dop) 2014-03-11 – ptlaoutebselict iadmtaipotelnemboyfeawnntheidcdheanthtniecaatdilonncaautlimolenevanelt lhbays to be implemented at (dop) 2016-08-03 spntuaabtniolidcnaaartldioleonvreoblfybaeynnpiduoebrnlsitceicamatiloennatotifoannalidentical national • lsattaensdtadradteorbbyywehnicdhortsheemneantitonal (dow) 2016-06-11 • slattaensdtadradtsecboynwflihcticinhgthweithnathtieonal (dow) 2016-06-11 – dslatotaecnsudtmadreadntset chboaynvweflihctoticinbhgethwweitithnhadthtrieaownanl standards conflicting with (dow) 2018-11-03 dthoecudmoceunmt heantvehatovebteowbiethwdritahwdnrawn Attention is drawn to the possibility that some of the elements of this document may be the subject of Apattteennttiornighistsd rCaEwNn EtoLEthCe[apnods/soibr iClitEyNth] asthsaollmneot obfethheeldeleremsepnotnssiobflethfiosr didoecnutmifyeintg manay obreatlhl esuscuhbpjeacttenotf prAigatthteetnsnt.tiornighistsd.rCawEnNEtoLtEhCe p[aonsds/iobriliCtyEtNha] tsshoamll enootfbteheheelledmreesnptsonosfibthleisfdoor ciduemnetinfytinmgaaynbyeotrheallsusubcjehctpoaftent patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such rights patent rights This document has been prepared under a mandate given to CENELEC by the European Commission TanhdisthdeocEuumroepnet ahnasFrbeeeeTnrapdrepAasresdocuiantdioenr a mandate given to CENELEC by the European Commission and the European Free Trade Association EEnnddoorsrseemmeennt tnontoictiece Endorsement notice The text of the International Standard IEC 61970-456:2013 was approved by CENELEC as a European SThtaendteaxrtdowf itheouItnatenrynamtioodniafilcaSttiaond ard IEC 61970-456:2013 was approved by CENELEC as a European SThtaentdeaxrtdowf itthheouInt taenrnyamtioondaiflicSattaionnd.ard IEC 61970-456:2013/A1:2015 was approved by CENELEC as a IEnutrhoepeoaffnicSiatlavnedrasirodnw, fitohroBuitbalinoygrmapohdyif,icthateiofno.llowing notes have to be added for the standards indicated: IEnNth6e1o9fIEf7icC0ia-64l195v7e60r:-s12io0n1,3f/oAr 1B:iN2bOl0ioT1gE6raHpahrmy,otnhiseedfoalsloEwNin61g9n70o-t1e.s have to be added for the standards indicated: IIEECC/T61S967109-170-2 NNOOTTEE HHaarrmmoonniisseedd aass ECNLC6/1T9S7601-19.70-2 EN 61970-456:2013/A1:2016 IIEECC/T61S967109-37001-2 NNOOTTEE HHaarrmmoonniisseedd aass ECNLC6/1T9S7601-390710.-2 EN 61970-456:2013/A1:2016 IIEECC 6611997700 530011 NNOOTTEE HHaarrmmooEnniissueeddroaasspEEeNNa66n119977fo00 r5300e11w ord The texIEt Co6f19d70o-c5u01ment 57N/O1T5E91H/FaDrmISoEn,isuefudrotauspreEeNae6nd19it7fioo0-nr50e11w oofrdIEC 61970-456:2013/A1, prepared by IEC/TC 57 "Power systems management and associated information exchange" was submitted to the ITEhCe-CteExNtEoLfECdopcaurmalelenltvo5t7e/1a5n9dF1a/oFppDrreIoSwEv,euodfurbotduypreCteoEaeNnadEimtfLiooEenrCne1wdasmooEfreNdInE6tC19A671109-47506-4:25061:230/A131/:A2011, 6p repared by TIEhCe/TtCex5t7o"fPodwoecur msyesntet m5s7/m15a9n1a/gFeDmISe,ntfuatnudreasesdoictiioanted1inofofrmIEaCtio6n19e7xc0h-4a5n6g:e2"0w13a/sA1su, bpmreitpteadretdo thbey TIIEEhCCe-/TCfoCElloN5wE7inL"gEPCodwapteearsrasalylresetlevfmioxtesedma: nadnaagpepmroevnetdabnydCaEssNoEcLiaEteCdaisnfEorNm6a1ti9o7n0e-4xc5h6a:2n0g1e3"/Aw1a:s20s1u6b.mitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61970-456:2013/A1:2016 T–helfaotleloswt dinagtedbaytews haircehftixheedd:ocument has to be implemented at (dop) 2016-08-03 Thenfoaltlioownainlgledvaetlebsyapreubfilxiceadti:on of an identical national (dop) 2016-08-03 – slattaensdtadradteorbbyywehnicdhortsheemdeonctument has to be implemented at – lnaatetisotndaal tleevbeyl bwyhpicuhbtlihceatdiooncuomf aenntidheanstitcoabl enaimtiopnleaml ented at (dop) 2016-08-03 – lnsatataetnisodtnadaraldtleovrbebylybweyhnpicduhobrtlsihceeamtnioeanntitoonf aalnstidaenndtaicrdasl ncaotnioflnicatling with (dow) 2018-11-03 tshtaenddoacrudmoer nbtyheanvdeotrosebme ewnithdrawn (dow) 2018-11-03 – latest date by which the national standards conflicting with – ltahteesdtodcautmeebnyt whahvicehttohbeenawtiitohndaral swtnandards conflicting with (dow) 2018-11-03 the document have to be withdrawn Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such pAattteennttioringhistsd.rawn to the possibility that some of the elements of this document may be the subject of Apattteennttiornigihstsd.raCwEnNtEoLtEheC p[oasnsdi/boilrityCEthNa]t ssohmalel noof tthbeeehleemldernetsspoofntshiibsledofcour mideennttimfyainygbaentyheorsuablljescut cohf ppaatteenntt rriigghhttss CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights Endorsement notice Endorsement notice Endorsement notice The text of the International Standard IEC 61970-456:2013/A1:2015 was approved by CENELEC as a European Standard without any modification T2he text of the International Standard IEC 61970-456:2013/A1:2015 was approved by CENELEC as a TEhuerotpeexat nofStthaendInatredrnwaittihoonuatl aSntaynmdoadrdifiIcEaCtio6n1 970-456:2013/A1:2015 was approved by CENELEC as a European Standard without any modification – – BS EN 61B97S0E-4N566:12907103-+4A516::22001163 - - EN 61970-456:2013+A1:2016 EN 61970-456:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies Publication Year Title EN/HD Year IEC 61970-452 - EN 61970-452 - Energy Management System Application IEC 61970-453 - Program Interface (EMS-API) - EN 61970-453 - IEC 61970-552 - Part 452: CIM static transmission network EN 61970-552 - model profiles Energy Management System Application Program Interface (EMS-API) - Part 453: Diagram Layout Profile Energy Management System Application Program Interface (EMS-API) - Part 552: CIM XML Model Exchange Format BS EN 61970-456:2013+A1:2016 – – 61970-456 © IEC:2013+A1:2015 BS EN 61970-456:2013 – – 61970-456 © IEC:2013 CON–T2E–NTS BS EN 61970-456:2013 61970-456 © IEC:2013 INTRODUCTION Scope C O N T E N T S I2NT RNOoDrmUaCtiTvIeOrNef.e r e.n c e s 76 13 SPcroofpilee in f.o r.m a t.i.o n 78 24 NOovremrvaietiwve r.e f.e r e.n c e s 78 35 PUrsoeficleasinefsor.m a t.i.o n 89 O5.v1ervGieewn.e r.a l .98 U5.s2e caEsMeSs s t.a t.e e s.t.i.m a t.i.o n 5.13 GENenTeSrOal-.E P r.o c e s s.: D a y.- a h.e a d c o n g e s.t.i.o n f.o r.e c a s.t .1.90 5.24 ESMysStesmtaptelaensntiinmgastitound.i.e s p r.o c e s s 1.91 5.35 EHNarTmSoOn-iEzaPtiroonceosf sp:laDnanyin-aghaenadd ocpoenrgaetsiotinosnmfoordeeclass.t 120 5A.r4chiteScytsutreem p l.a n n in g s t.u d i.e s p r.o c e s s 121 56.51 HGaernmeroanli.z.a t.i.o n o f p l.a n.n i.n g a n d o p e r.a t.i.o.n s m o d e ls 12 A6.r2chitePcrtoufrilee a r.c.h i.t.e c t.u r.e 12 6.13 GPreonfielerasl a n d d a t.a s e ts f.o r E M S n e t.w o r.k a n a l.y.s i.s 152 6.24 Profilesaarcnhditdeactuarseet.s i.n a p l.a n n.i.n g p o w e r f.lo w 162 6.35 PMroodfielel sauatnhdorditaytasseetstsafnodr EinMstSannceetwleovrekladnaatlaysmisod u l.a r.i.z a t.io n 157 6.4 P6.r5o.f1ilesGaenndedratl a s e.t.s i.n a p l.a n n.i.n g p o w e r f.lo w 176 6.5 M6.o5d.2el aEuMthSorintystsaentcseamndodinusltaarnizcaetiloenv.e l d a t.a m o d u l.a r.i.z a t.io n 17 6.5.13 GPleannenrianlg i.n s.t.a n c e m o d u.l.a r.i.z a t.i.o n 178 6.6 6P.r5in.2cipleEsMoSf instance modularization 179 Applyi6n.g5.t3he sPtalanndnairndg tionsbtuasnicneesmsopdruolbalreizmasti.o n 1281 67.61 PErMinScinpeletws oorfkinasntalnycseisminotdeuglraartizoantiwonith e x t.e r.n a l c o.n s u m e r.s 1291 A7.p2plyiPnglanthneinsgtannedtwarodrktoabnuaslyinsiessisntpergorbalteiomns w i.t.h e.x t.e r.n a l c o n s.u m e r.s 213 7D.a1ta mEoMdSelnweittwhoCrkIMaXnMalLyseisxainmtepglerast.i.o n w it.h e x t.e r.n a l c o n.s u m e r.s 214 78.21 PMleaansnuinregmnentwt oinrtkearfnaacleyssi2s ainntdeg3r.a t.io n w i.t.h e.x t.e r.n a l c o n s.u m e r.s 243 D8.a2ta mTodpeolowgiythinCteIMrfXacMeL4e x.a m p l.e s 24 8.13 MSteaatesuvraermiaebnlet sinitnetrefrafcaecses25aandan3d 5.b s t.a t.e e s t.im a t.i.o n 246 8T.o2poloTgoypoplroogfiylei.n t.e r.f.a c.e 3204 89.31 SGteante rvaal r ia b l.e s i.n t.e.r f.a c.e s a a n d 5.b s t.a t.e e s t.i.m a t.i.o n 2360 T9.o2poloCgoynpcroefteilec.l.a s s e s 30 9.1 G9.e2n.1eralT e.r m in a l 30 9.2 C9.o2n.2cretTeocplaoslosgeisca l.N o d.e 301 9.39A.b2s.31tractTNcealrmamseisne�a�s�l��.–�.�.�.I�.d�.�.e�.�.n�.�.t�.i�.f�.ie�.�.d�.�.O�.�.�.b� �j.�e.�.�c.�t.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�310 10 StateV9a.2ri.a42blesTNoappmroefloiTlegyip.c.ea l.�N.�.�.o�.�.d�.�e.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�321 91.03.1 AGbesnteraraclt.c l.a s s.e s – I.d e n t.i.f.ie d O b j.e c.t 312 10 S10ta.2teVCaorniacbrleetse pcrlaosfislee.s 32 10.1 G10e.n2e.1ralT o.p o l.o g i.c a.l.I.s l.a n d 32 10.2 C10o.n2c.2retSevcIlnajsescetiso.n 32 10.2.13 TSovPpoolwogeircFalolIwsl.a n d 323 10.2.24 SvISnhjeocrtCioinrc.u i.t 323 10.2.35 SvPSohuwnetrCFolomwp e.n s a t.o r.S e c t.i.o n s 33 10.2.46 SvTSahpoSrttCeiprc u i.t 334 10.2.57 SvSVhoultangtCeo m p e.n s a t.o r.S e c t.i.o n s 334 10.2.6 SvTapStep 34 10.2.7 SvVoltage 345 10.2.8 TopologicalNode����������������������������������������������������������������������������������������35 – – BS EN 61970-456:2013+A1:2016 – – 61970-456 © IEC:2013+A1:2015 BS EN 61970-456:2013 61970-456 © IEC:2013 10.3 Abstract classes 345 10.3.1 StateVariable 345 10.3.2 ActivePower.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�345 10.3.3 AngleDReagdeiaenss�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�35 10.3.4 ApparentPower.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�356 10.3.5 ReactivePower�.�.�.�.�.�.�.�.�.�.�.�.� �.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�356 10.3.6 Voltage.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�.�356 Bibliography 367 Figure – TSO sends a case to be merged with the overall model .11 Figure – Profile relationships 13 Figure – Instance example of the CIM connectivity model 14 Figure – EMS datasets by CIM profiles 15 Figure – Planning power flow datasets by CIM profile 16 Figure – State estimation case sequence 17 Figure – Instance modularization applied in an EMS 18 Figure – Instance modularization applied to planning power flow models 19 Figure – Model merge process 20 Figure 10 – EMS datasets to an external client 21 Figure 11 – EMS boundary dataset example 22 Figure 12 – Bus-branch Integration architecture 23 Figure 13 – Bus-branch modeling of bus coupler and line transfer 23 Figure 14 – CIM topology model 24 Figure 15 – Topology solution interface 25 Figure 16 – CIM state variable solution model .27 Figure 17 – State solution interface example 29 Table – Profiles defined in this document BS EN 61970-456:2013+A1:2016 – – 61970-456 © IEC:2013+A1:2015 – – BS EN 61970-456:2013 61970-456 © IEC:2013 INTRODUCTION This standard is one of several parts of the IEC 61970 series that defines common information model (CIM) datasets exchanged between application programs in energy management systems (EMS) The IEC 61970-3xx series of documents specify the common information model (CIM) The CIM is an abstract model that represents the objects in an electric utility enterprise typically needed to model the operational aspects of a utility This standard is one of the IEC 61970-4xx series of component interface standards that specify the semantic structure of data exchanged between components (or applications) and/or made publicly available data by a component This standard describes the payload that would be carried if applications are communicating via a messaging system, but the standard does not include the method of exchange, and therefore is applicable to a variety of exchange implementations This standard assumes and recommends that the exchanged data is formatted in XML based on the resource description framework (RDF) schema as specified in 61970-552 CIM XML model exchange standard IEC 61970-456 specifies the profiles (or subsets) of the CIM required to describe a steady- state solution of a power system case, such as is produced by power flow or state estimation applications It describes the solution with reference to a power system model that conforms to IEC 61970-452 in this series of related standards (Thus solution data does not repeat the power system model information.) IEC 61970-456 is made up of several component profiles that describe: topology derived from switch positions, measurement input (in the case of state estimation), and the solution itself – – BS EN 61970-456:2013+A1:2016 – – 61970-456 © IEC:2013+A1:2015 BS EN 61970-456:2013 61970-456 © IEC:2013 ENERGY MANAGEMENT SYSTEM APPLICATION PROGRAM INTERFACE (EMS-API) – Part 456: Solved power system state profiles Scope This part of IEC 61970 belongs to the IEC 61970-450 to IEC 61970-499 series that, taken as a whole, defines at an abstract level the content and exchange mechanisms used for data transmitted between control centers and/or control center components The purpose of this part of IEC 61970 is to rigorously define the subset of classes, class attributes, and roles from the CIM necessary to describe the result of state estimation, power flow and other similar applications that produce a steady-state solution of a power network, under a set of use cases which are included informatively in this standard This standard is intended for two distinct audiences, data producers and data recipients, and may be read from those two perspectives From the standpoint of model export software used by a data producer, the standard describes how a producer may describe an instance of a network case in order to make it available to some other program From the standpoint of a consumer, the standard describes what that importing software must be able to interpret in order to consume solution cases There are many different use cases for which use of this standard is expected and they differ in the way that the standard will be applied in each case Implementers should consider what use cases they wish to cover in order to know the extent of different options they must cover As an example, this standard will be used in some cases to exchange starting conditions rather than solved conditions, so if this is an important use case, it means that a consumer application needs to be able to handle an unsolved state as well as one which has met some solution criteria Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 61970-452, Energy Management System Application Program Interface (EMS-API) – Part 452: CIM Static Transmission Network Model Profiles1 IEC 61970-453, Energy Management System Application Program Interface (EMS-API) – Part 453: Diagram Layout Profile IEC 61970-552, Energy Management System Application Program Interface (EMS-API) – Part 552: CIM XML Model Exchange Format2 ————————— To be published To be published BS EN 61970-456:2013+A1:2016 – – BS EN 61970-456:2013 61970-456 © IEC:2013+A1:2015 – – BS EN 61970-456:2013 – – 61970-456 © IEC:2013 61970-456 © IEC:2013 33IEC PP61rroo97ffii0llee-4ii5nn6ff:oo20rrmm13aa/AttiiMoonnD1:2015 – – © IEC 2015 The profiles defined in this document are based on the UML version CIM14v14 T3hePprroofiillees idneffoinremdaitniothnis document are based on the UMUL MveLrsvieornsiConIMC1I4Mv1154v.33 The profiles are listed in Table TRheeplparcoef,ileins tahreefilrissttepdairnagTraabplhe,1“.UML version CIM14v14” by “UML version CIM15v33” Table – Profiles defined in this document Replace the existing TabTleab1leby1 t–hePrfoolfloilwesindgenfeinwedTainbleth1is document  Name Version URI Revision Name Name Version Version URIURI ReRviesdviaiostneiodnate TSotpaoteloVgayriables http://iech.ctthp://T/iCec5.7ch/2/T0C1517/6/611997700 445566//STtoapteoVloagriya/bCleIsM/C1I5M/214/1 date StateVariables http://iec.ch/TC57/61970-456/StateVariables/CIM14/1 22001110 0039 2049 STtaotpeoVloagriyables http://iech.ctthp://T/iCec5.7ch/2/T0C1517/6/611997700 445566//TSotapoteloVgayr/CiaIbMle14s//1CIM15/2 2010-03-24 Topology http://iec.ch/TC57/61970-456/Topology/CIM14/1 22001110 0039 2049  2010-03-24 Topology profile Overview Overview 9.1 General This document describes an interface standard in which CIM/XML payloads are used to tTRrhaeinmssofdevorecruemstuehlnetst dcerseseacctroeibndedsduarpinnagrinattgyerprafiapccahel: sstet“aaPndrdoyaf-isrldetatien nnwaehmtiwcehosrpkCacIaMen:/aXlyMshListtppp:a/r/yoilecocea.sdcshse/TsaCr(e5e7.ug/6s 1es9dt7a0ttoe- et4rs5at6nim/sTfaeotrpioornleosgouryl/tpCsoIMwcre1er4a/tf1elo#dw”.dsuorliuntgiontysp).icMalajsotrearedqy-usirtaetmeennetst/woobrjkecatinvaeslysdirsivpinrgoctehsesedses(ieg.ng.ofsttahties setsatnimdaatridonincolrudpeo:wer flow solutions) Major requirements/objectives driving the design of this standard include: 9.2.2 TopologicalNode • Power flow solution algorithms and output are virtually the same whether run in operations • oProwplearnfnloinwg scoolunttieoxntsa.lgSotraitthemesstaimndatoourtpouuttpauret svhiratureasllyathceomsammoenwchoertehewritrhunpoinwoepr efrlaotwio nAs Addotrheplafonlnloinwgingcornotwexatst thSetaetned eosfttimheattoarbloeu“tNpuattivsehamreesmbaercso”m: mon core with power flow A single standard is desired so as to minimize software development and enable use cases tshinagt lcerosstasnbdeatrwdeiesndeensvirierodnsmoenatss.to minimize software development and enable use cases ContnheacttivcitryoNsosdebCeotnwtaeienenr e1n.v.1iroCnomnneencttisv.ityNodeContainer The connectivity node container to which the • While some users of this standard might only be toinptoelorgeiscatel ndodine btheleonogus.tput state, the more • gWehnieleraslomsiteuautsioenrs iosf tthhiast sutasnedrsardcomntiginhuteontloy bpeerifnotremresfotelldowin-otnheaonuatlpyuset ssta(ete.g, thveomltaogree gsteanbeilriatyl ) saintudarteioqnuiries btohtaht thueseinrspuct oonntiwnuheichtothepesroflourtmionfowlaloswb-oansedanaanldystehse o(uet.pgu t vroelstualgt.e stability) and require both the input on which the solution was based and the output result R• emRoevael tlihfee afinrsatlyrotiwca“ldpersoccreipstsioens”offrtoemn itnhveotlaveblea “sIenrhieesritoefdsmoleumtiobnesrsi”n which most of the input • dRaetaal rleifme aainnaslythticeasl apmroecefrsosmesonoeftesnoliuntvioonlvteoathseernieesxto, fasnodluthtieonsstainndwarhdicmh umsot sstuopfpothret tihnepsuet AddpdtrahoteacefroseslmleoaswininsgatnhweeawsyaStmhuaebtcfldraooumesseosnnoe9t.2sreo.3plueatianotdnd9tao.t2at.h4uenannfteeecxretS,sausbnacdrillatyhu.esest9a.n2d.2a:rd must support these processes in a way that does not repeat data unnecessarily In order to meet these requirements, this standard depends on modularizing the potentially 9vIno.2lou.3rmdienNroautoms emoveeertaltlhienspeutreaqnudiroeumtpeunttsd,atthaisinstotasnudbasredtsdethpaetnwdsouoldn emaocdhublaerirzeinagliztehde apsostemnatilalellry, sveopluamrainteouCsIMov/XerMaLll ipnapyultoaadnsd oAuntpiuntsdtaantaceinotof osnuebsoeftsththesaet wsouublsdeetsacish rbeeferrereadlizteodhaesresimn aalslera, sCeopraerpaateckCaIgMe/XML payloads An instance of one of these subsets is referred to herein as a ‘dataset’ ‘dataset’ The Name class provides the means to define any number of human readable names for an TTobwwjooecttt.yyppAeessnaoomff eppaairrsttiittiinooonntiinntggo ibneto udsaetdasfeotrs daaerreefiniuunttgiilliizzieenddte r-IIonnbjttehhceet ffriierrsslatt,,tiotthhneeshddipaastt.aa Fiissor mminootddeuur-llaaorrbiizzjeeecddt into datasets areclcaotirodninsghiptos iwnshtaetakdinudseotfhdeaotabjeisctpirdoednutcifeicdat(iownhi'cmhRgIDen'.erally corresponds with what kind of aapccpolircdaitniogntoprwohdautceksindthoef ddaattaa).isCpIrMod‘upcreodfile(ws’hi(cshubgseentesraolfly tchoerrceosmpopnledtse wCitIhM)whdaetfikniendthoef calpapslsiceastioanndpraotdtruibcuetsesthtehadt amtaa)k eCuIMp o‘pf roefailcehs’ k(insudbsoef tsmoodfultahreizactoiomnp leTthee CsIeMc)onddefitnyepethoef pcNlaartstiisvtieeosnminaengmdisbaebtrtysrib‘muotedselthaautthmoraitkyeseutp’ (oMfAeSa)c, hwhkiicnhd doivfidmeosddualatarizinattoiosne tsThoef osbejceocnt dinstytapneceosf apcacrtoitridoinnigngtois wbhyic‘mh oudteillitayuothroerintytitsyeti’n(ManASin),tewrhcoicnhndecivtiidoens isdarteasipnotonssiebtles ofof robthjeectdiantsat.anTcheiss panacacmrtoietridoinnigngtoocwcuhrischatutthilei1ty.i.n1ostranecnetsittlryeinvgienl aanndinptreordcuocnensecmtAiuonlyntifprielsee tdreeaxsttapthsoaenttsnsiabgmloeevs eftohrenr eotbdhjeebcytd tahtea.saTmhies ppraorftiitleionthinagt occocmurbsinaet tthoe fionrsmtanthcee lecovemlpalentdepsroedt uocfesdamtaultfioprletdhaattasperotsfilgeo vUernndeedrsbtayntdhiengsatmhee pIdreonfitliefiedtOhabjtecct ombine to 1f.o.1rm theIdecnotimfiepdlOebtejecst et of datIadenftoifriedthoabtjecptrtohfaitleth.isUnnamdeerdsetsaingndaintegs the partitioning approach is critical to understanding how to use this standard to implement a ppaarrttiitciuolnairngbuaspinpersosacshceinsacriroit.ical to understanding how to use this standard to implement a pNaarmtiecTuylpaer business scena1.r.i1o NameType Type of this name This standard is flexible and designed to satisfy a wide range of analytical scenarios in the 9pT.lha2in.s4nsintaNgnaadmnaderdToyipspeefrlaetxinibglebuasnidnedsessiegnnveidrontomseanttiss.fyWae weixdpeecrat nthgaet owf haenraelyptaicratilesscaernearuiosisnginitthtoe cpolallnanbionrgataendinopseormaetinbgubsuinseinsessspreoncveisros,nmtheonstse pWaertieexspewciltl thoafttenwhweraentpatortiecsreaartee uasdindgitioitntaol cCoolrlaebpoarackteagien some bthuastindeessscrpibroeceasnsy, rtehsotrsiectiopnasrtieasndwcilul sotoftmeinzawtioannst toof tchreeastteanaddadridtiothnaatl business agreements abruesidneeessmeadgrneeecmeesnstasrythfaotr dtheesicrripbreocaensys.reInstmricotsiot ncsasaensd, cthuesstoemaidzadtitioionnsaloaf gthreeemstaenntdsarwdillthbaet laTorycepaedl eaoegfmreeendmamennet.csePassonasdrsywibiflloel rnotvhtaebluierepsIEroCfcoeirnsdsau.tstIrtnirbyumsteotasnt'ndcaaamrsdess'., atrheesiemapdledmitieonntaaltiaognredeempentdsewntill bbuet lsotacanldagrdrepermofeilnetss manady wspillenciofyt btyepIeEsC Ainnduesnttreyrpsrtiasnedmaradys.have multiple IT systems each having its own local name for the same object, e.g a planning system may have different names from an EMS An object may also have different names within the same IT system, e.g localName and aliasName as defined in CIM version 14 Their definitions from CIM14 are as follows: