Bsi bs en 61182 2 2 2012

BS EN 61182-2-2:2012 BSI Standards Publication Printed board assembly products — Manufacturing description data and transfer methodology Part 2-2: Sectional requirements for implementation of printed board fabrication data description NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide™ BRITISH STANDARD BS EN 61182-2-2:2012 National foreword This British Standard is the UK implementation of EN 61182-2-2:2012 It is identical to IEC 61182-2-2:2012 The UK participation in its preparation was entrusted to Technical Committee EPL/501, Electronic assembly technology & Printed Electronics A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2012 Published by BSI Standards Limited 2012 ISBN 978 580 70189 ICS 31.180 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2012 Amendments issued since publication Amd No Date Text affected BS EN 61182-2-2:2012 EUROPEAN STANDARD EN 61182-2-2 NORME EUROPÉENNE June 2012 EUROPÄISCHE NORM ICS 31.180 English version Printed board assembly products Manufacturing description data and transfer methodology Part 2-2: Sectional requirements for implementation of printed board fabrication data description (IEC 61182-2-2:2012) Produits pour cartes imprimées équipées Données descriptives de fabrication et méthodologie de transfert Partie 2-2: Exigences intermédiaires pour la mise en oeuvre de cartes imprimées Description des données de fabrication (CEI 61182-2-2:2012) Leiterplatten Beschreibung und Transfer von Daten Teil 2-2: Anforderungen für die Anwendung von Dokumentationsdaten der Leiterplattenfertigung (IEC 61182-2-2:2012) This European Standard was approved by CENELEC on 2012-06-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels © 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 61182-2-2:2012 E BS EN 61182-2-2:2012 EN 61182-2-2:2012 -2- Foreword The text of document 91/1025/FDIS, future edition of IEC 61182-2-2, prepared by IEC/TC 91 "Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61182-2-2:2012 The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-03-01 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-06-01 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights Endorsement notice The text of the International Standard IEC 61182-2-2:2012 was approved by CENELEC as a European Standard without any modification In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61188-5-1 NOTE Harmonised as EN 61188-5-1 IEC 61188-5-2 NOTE Harmonised as EN 61188-5-2 IEC 61188-5-3 NOTE Harmonised as EN 61188-5-3 IEC 61188-5-4 NOTE Harmonised as EN 61188-5-4 IEC 61188-5-5 NOTE Harmonised as EN 61188-5-5 IEC 61188-5-6 NOTE Harmonised as EN 61188-5-6 IEC 61188-5-8 NOTE Harmonised as EN 61188-5-8 ISO 10303-210 NOTE Harmonised as EN ISO 10303-210 BS EN 61182-2-2:2012 EN 61182-2-2:2012 -3- Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies Publication Year Title EN/HD Year IEC 60194 - Printed board design, manufacture and assembly - Terms and definitions EN 60194 - IEC 61182-2 - Printed board assembly products Manufacturing description data and transfer methodology Part 2: Generic requirements - –2– BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 CONTENTS Scope Normative references Terms and definitions General principles 4.1 Requirements 4.2 Interpretation 4.3 Categories and content General rules 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 Overview File content descriptions 10 Logistic descriptions 10 File history descriptions 10 5.4.1 General 10 5.4.2 HistoryRecord use case – Initial design release 11 5.4.3 Supply chain modifications 12 5.4.4 OEM reviews modifications – HistoryRecord update 14 BOM (board fabrication materials) 14 AVL (board material suppliers) 16 Documentation layers 16 5.7.1 General 16 5.7.2 Documentation layer restrictions 16 5.7.3 Reference to documentation 17 5.7.4 Step usage 18 5.7.5 Set 19 Design for excellence (Dfx) analysis 19 5.8.1 General 19 5.8.2 DfxMeasurement 19 Miscellaneous image layers 19 5.9.1 General 19 5.9.2 Step usage 20 Packages and land patterns 20 5.10.1 General 20 5.10.2 Step usage for component packages and land patterns 20 5.10.3 Land pattern details 21 Solder mask and legend layers 21 5.11.1 General 21 5.11.2 Solder mask details 21 5.11.3 Legend details 21 5.11.4 Step usage for solder mask and legend layers 22 Drilling and routing (tooling) layers 22 5.12.1 General 22 5.12.2 Drilling details 22 5.12.3 Routing details 22 5.12.4 Step usage for drilling and routing 23 Net list 23 BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 –3– 5.13.1 General 23 5.13.2 Step usage for net list 24 5.14 Outer conductive layers 24 5.14.1 General 24 5.14.2 Outer conductive layer details 24 5.14.3 Step usage for outer conductive layers 24 5.15 Inner conductive layers 25 5.15.1 Requirement 25 5.15.2 Inner conductive layer details 25 5.15.3 Step usage for inner conductive layers 25 5.16 Board construction 25 5.16.1 Requirement 25 5.16.2 Board construction details 26 5.16.3 Step usage for board construction 26 Modeling 26 6.1 General 26 6.2 Information models 27 Report generators 28 7.1 IEC 61182-2-2 format 28 7.2 Hole usage report 29 7.3 Pad usage report 29 7.4 Conductor usage report 29 Glossary 29 Annex A (normative) Printed board fabrication schema 30 Bibliography 42 Figure – Board fabrication data relationship Figure – HistoryRecord use case 11 Figure – Documentation package grade requirements 18 Figure – Fabrication steps data model example 27 Figure – IPC-2584 UML data model 28 Table – Function relationship of an IEC 61182-2-2 fabrication file Table – Bom restrictions 15 Table – Recommended reference designators for printed board material 15 Table – Avl restrictions 16 Table – Documentation layer restrictions 17 Table – General descriptions of documentation layer functions 17 Table – Relationship to documentation standard 18 Table – Miscellaneous layer restrictions 20 –6– BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 PRINTED BOARD ASSEMBLY PRODUCTS – MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY – Part 2-2: Sectional requirements for implementation of printed board fabrication data description Scope This part of IEC 61182 provides the information on the manufacturing requirements used for fabricating printed boards This standard determines the XML schema details, defined in the generic standard IEC 61182-2 and some of the sectional standards that are required to accomplish the focused tasks When other standards are invoked, their requirements become a mandatory part of the fabrication details as defined in the IEC 61182-2 The IEC 61182-2 contains all the requirements necessary to build an electronic product The cardinality indicated in the IEC 61182-2 may be superseded by a restriction of an attribute (enumerated string ID) or indication of a requirement that is noted as being optional in the generic standard However, this standard renders the requirement mandatory based on the supply chain communication need In order to assist the users of this standard, all the applicable XML schema elements that apply to the board fabrication function are listed in Annex A The list is grouped by topics and shows the absolute path for the elements that pertain to the focus of this standard If the parent element is not present no children are considered in the implementation either However, all attributes identified for a particular element follow the cardinality of the IEC 61182-2, unless a restriction is stated in this standard Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 60194, Printed board design, manufacture and assembly – Terms and definitions IEC 61182-2, Printed board assembly products – Manufacturing description data and transfer methodology – Part 2: Generic requirements Terms and definitions For the purposes of this document, the terms and definitions of IEC 60194 as well as the following apply 3.1 data intelligent information that may be used directly by machine in order to accomplish a particular manufacturing event BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 –7– 3.2 drawings hard copy or un-intelligent documentation (e.g PDF) to which all formatting criteria apply 3.3 printed circuit board PCB composite of organic and inorganic material with external and internal wiring allowing electronic components to be mechanically supported and electrically connected 3.4 supplier organization or company responsible for providing the goods and/or services required to produce an electronic product which includes physical items as well as intellectual/software characteristics and is documented as either user procurement, supplier data or contractual agreements 3.5 user individual, organization, company or agency responsible for the procurement of electrical/electronic hardware, and having the authority to define the class of equipment and any variation or restrictions (i.e., the originator/custodian of the contract detailing these requirements) 3.6 via opening in the dielectric layer(s) through which a conductor passes upwards or downwards to subsequent chip or package conductive layers for electrical interconnections or for heat transfer 4.1 General principles Requirements The requirements of IEC 61182-2 are a mandatory part of this standard The generic details specifically provide data related to design, printed board manufacturing, assembly and test The XML schema of the IEC 61182-2 consists of four major functions each of which have several children who then become new parent elements Several of these major elements and their associated new parents are defined in other sectional specifications, thus the requirements of those standards are also a mandatory part of the board fabrication standard to the extent of their description and any restrictions contained in this standard Each of the standards and the elements defined therein has a specific function or task respectively, and although they may at times be used independently, they become an important addition to the requirements of the board fabrication descriptions As such the following paragraphs provide the total requirements for the three types of board fabrication files that are supported by the principles of the IEC 61182-2 Accordingly, the information interchange for the specific purpose of printed board fabrication is only possible if all the XML instances have been properly prepared for such a purpose 4.2 Interpretation "Shall", the emphatic form of the verb, is used throughout this standard whenever a requirement is intended to express a provision that is mandatory Deviation from a "shall" requirement is not permitted, and compliance testing is required in order to demonstrate that the XML instances are correct according to the W3C directives and this standard The XML –8– BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 schema shall be the method to check syntax and semantics Any appropriate software tool that prompts the user, to correct the ambiguity or to insert missing information, may be used for this purpose The words "should" and "may" are used whenever it is necessary to express non-mandatory provisions "Will" is used to express a declaration of purpose 4.3 Categories and content Table provides the major functions that shall be addressed by this standard The descriptions relate to the appropriate printed board fabrication processes There are fifteen (15) unique functions that can be defined by the use of the XML elements and the resulting XML instances Table indicates the relationships of the requirements for various elements and topics within the descriptions for a particular process Table – Function relationship of an IEC 61182-2-2 fabrication file Name Fabrication Comment and standard reference File content descriptions Logistic descriptions File history descriptions M M O M M M M M M Elements indicated in IEC 61182-2 according to their cardinality and restrictions of this standard BOM AVL M – M M M M Elements indicated in IEC 61182-2 according to their cardinality and restrictions of this standard Miscellaneous image layers Documentation layers Design for excellence (Dfx) analysis – O O O M O O M O Elements indicated in IEC 61182-2 according to their cardinality and restrictions of this standard Component packages a Land patterns a Soldermask, legend layers Drilling and Routing (tooling) layers Net list (soft tooling) a Outer conductive layers Inner conductive layers Board construction Abbreviations: BOM Board fabrication materials AVL Board material suppliers Dfx Design for eXcellence – – M M O M M M – – M M M M M M O O M M M M M M Elements indicated in this sectional standard, according to cardinality of IEC 61182-2 and any restrictions contained in the following paragraphs of this standard Key: M O – Mandadory Optional (may or may not be pertinent to the particular file or data interchange) Extraneous section (not necessary) Although software tools used to parse the file will permit the extraneous data, it is recommended that only the requirements identified as mandatory or optional are included in the file in order to reduce file size transfer a Component packages and land patterns will be further defined in future IEC 61182-2-3 1, and net lists in future IEC 61182-2-4 , their XML schemas are repeated in this standard ————————— Under consideration – 32 – IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Location 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Butterfly 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Circle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Cutout 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Diamond 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Donut 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Ellipse 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Hexagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Moire 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Octagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Oval 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/RectCenter 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/RectCham 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/RectCorner 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/RectRound 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Thermal 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/Triangle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/BadBoardMark/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Location 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Butterfly 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Circle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Cutout 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Diamond 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Donut 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Ellipse 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Hexagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Moire 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Octagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Oval 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/RectCenter 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/RectCham 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/RectCorner 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/RectRound 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Thermal 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/Triangle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GlobalFiducial/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Location 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Butterfly 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Circle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Cutout 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyStepCurve BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC – 33 – 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Diamond 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Donut 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Ellipse 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Hexagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Moire 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Octagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Oval 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/RectCenter 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/RectCham 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/RectCorner 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/RectRound 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Thermal 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/Triangle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/GoodPanelMark/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Location 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Butterfly 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Circle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Cutout 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Diamond 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Donut 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Ellipse 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Hexagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Moire 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Octagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Oval 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/RectCenter 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/RectCham 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/RectCorner 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/RectRound 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Thermal 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/Triangle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LocalFiducial/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Hole 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Arc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Arc/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Arc/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Line 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Line/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Line/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Outline/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Slot/Polyline/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Location 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Butterfly 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Circle – 34 – IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Cutout 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Diamond 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Donut 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Ellipse 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Hexagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Moire 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Octagon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Oval 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/RectCenter 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/RectCham 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/RectCorner 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/RectRound 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Thermal 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Triangle 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Arc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Arc/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Arc/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Line 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Line/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Line/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/Polygon 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Outline/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline/PolyBegin 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline/PolyStepCurve 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline/PolyStepSegment 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Polyline/LineDescRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text/Xform 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text/BoundingBox 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text/FontRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text/Color 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/Text/ColorRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/UserSpecial 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Features/UserPrimitiveRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/Color 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/ColorRef 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LineDesc 61182-2/Ecad/CadData/Step/Route/LayerFeature/Set/LineDescRef 61182-2/Ecad/CadData/Step/Datum 61182-2/Ecad/CadData/Step/Profile 61182-2/Ecad/CadData/Step/Profile/Polygon 61182-2/Ecad/CadData/Step/Profile/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Profile/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Profile/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Profile/Cutout 61182-2/Ecad/CadData/Step/Profile/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Profile/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Profile/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/StepRepeat 61182-2/Ecad/CadData/Step/Package 61182-2/Ecad/CadData/Step/Package/Outline 61182-2/Ecad/CadData/Step/Package/Outline/Polygon 61182-2/Ecad/CadData/Step/Package/Outline/Polygon/PolyBegin BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC – 35 – 61182-2/Ecad/CadData/Step/Package/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/Outline/LineDesc 61182-2/Ecad/CadData/Step/Package/Outline/LineDescRef 61182-2/Ecad/CadData/Step/Package/LandPattern 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Xform 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Location 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Butterfly 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Circle 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Polygon 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Cutout 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Diamond 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Donut 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Ellipse 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Hexagon 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Moire 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Octagon 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Oval 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/RectCenter 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/RectCham 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/RectCorner 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/RectRound 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Thermal 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/Triangle 61182-2/Ecad/CadData/Step/Package/LandPattern/Pad/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Package/LandPattern/Target 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Xform 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Location 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Butterfly 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Circle 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Polygon 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Cutout 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Diamond 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Donut 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Ellipse 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Hexagon 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Moire 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Octagon 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Oval 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/RectCenter 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/RectCham 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/RectCorner 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/RectRound 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Thermal 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/Triangle 61182-2/Ecad/CadData/Step/Package/LandPattern/Target/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Package/SilkScreen 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/Polygon 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/LineDesc 61182-2/Ecad/CadData/Step/Package/SilkScreen/Outline/LineDescRef – 36 – IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text/Xform 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text/BoundingBox 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text/FontRef 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text/Color 61182-2/Ecad/CadData/Step/Package/SilkScreen/Text/ColorRef 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Xform 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Location 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Butterfly 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Circle 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Polygon 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Cutout 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Diamond 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Donut 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Ellipse 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Hexagon 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Moire 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Octagon 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Oval 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/RectCenter 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/RectCham 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/RectCorner 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/RectRound 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Thermal 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/Triangle 61182-2/Ecad/CadData/Step/Package/SilkScreen/Target/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/Polygon 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/LineDesc 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Outline/LineDescRef 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text/Xform 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text/BoundingBox 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text/FontRef 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text/Color 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Text/ColorRef 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Xform 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Location 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Butterfly 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Circle 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Polygon 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Cutout 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Diamond 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Donut 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Ellipse 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Hexagon 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Moire 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Octagon 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Oval BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC – 37 – 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/RectCenter 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/RectCham 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/RectCorner 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/RectRound 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Thermal 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/Triangle 61182-2/Ecad/CadData/Step/Package/AssemblyDrawing/Target/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/Package/Pin 61182-2/Ecad/CadData/Step/Package/Pin/Xform 61182-2/Ecad/CadData/Step/Package/Pin/Location 61182-2/Ecad/CadData/Step/Package/Pin/Outline 61182-2/Ecad/CadData/Step/Package/Pin/Outline/Polygon 61182-2/Ecad/CadData/Step/Package/Pin/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/Package/Pin/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/Package/Pin/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/Package/Pin/Outline/LineDesc 61182-2/Ecad/CadData/Step/Package/Pin/Outline/LineDescRef 61182-2/Ecad/CadData/Step/Component 61182-2/Ecad/CadData/Step/Component/BooleanAttribute 61182-2/Ecad/CadData/Step/Component/DoubleAttribute 61182-2/Ecad/CadData/Step/Component/IntegerAttribute 61182-2/Ecad/CadData/Step/Component/NonstandardAttribute 61182-2/Ecad/CadData/Step/Component/OptionAttribute 61182-2/Ecad/CadData/Step/Component/TextAttribute 61182-2/Ecad/CadData/Step/Component/Xform 61182-2/Ecad/CadData/Step/Component/Location 61182-2/Ecad/CadData/Step/VplPackage 61182-2/Ecad/CadData/Step/VplPackage/Outline 61182-2/Ecad/CadData/Step/VplPackage/Outline/Polygon 61182-2/Ecad/CadData/Step/VplPackage/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/VplPackage/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/VplPackage/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/VplPackage/Outline/LineDesc 61182-2/Ecad/CadData/Step/VplPackage/Outline/LineDescRef 61182-2/Ecad/CadData/Step/VplPackage/Pin 61182-2/Ecad/CadData/Step/VplPackage/Pin/Xform 61182-2/Ecad/CadData/Step/VplPackage/Pin/Location 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/Polygon 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/LineDesc 61182-2/Ecad/CadData/Step/VplPackage/Pin/Outline/LineDescRef 61182-2/Ecad/CadData/Step/VplComponent 61182-2/Ecad/CadData/Step/VplComponent/CadVmpn 61182-2/Ecad/CadData/Step/LogicalNet 61182-2/Ecad/CadData/Step/LogicalNet/BooleanAttribute 61182-2/Ecad/CadData/Step/LogicalNet/DoubleAttribute 61182-2/Ecad/CadData/Step/LogicalNet/IntegerAttribute 61182-2/Ecad/CadData/Step/LogicalNet/NonstandardAttribute 61182-2/Ecad/CadData/Step/LogicalNet/OptionAttribute 61182-2/Ecad/CadData/Step/LogicalNet/TextAttribute 61182-2/Ecad/CadData/Step/LogicalNet/LogicalNetPin 61182-2/Ecad/CadData/Step/PhyNetGroup 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Butterfly 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Circle 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Polygon 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Cutout 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Diamond – 38 – IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Donut 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Ellipse 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Hexagon 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Moire 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Octagon 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Oval 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/RectCenter 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/RectCham 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/RectCorner 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/RectRound 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Thermal 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/Triangle 61182-2/Ecad/CadData/Step/PhyNetGroup/PhyNet/PhyNetPoint/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature 61182-2/Ecad/CadData/Step/LayerFeature/Set 61182-2/Ecad/CadData/Step/LayerFeature/Set/BooleanAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/DoubleAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/IntegerAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/NonstandardAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/OptionAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/TextAttribute 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Circle 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Octagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/RectRound 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/Pad/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Circle 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Octagon BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC – 39 – 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/RectRound 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/BadBoardMark/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Circle 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Octagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/RectRound 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/GlobalFiducial/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Circle 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Octagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/RectRound 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/GoodPanelMark/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Circle – 40 – IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Octagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/RectRound 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/LocalFiducial/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Hole 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Arc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Arc/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Arc/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Line 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Line/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Line/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Outline/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Slot/Polyline/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Location 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Butterfly 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Circle 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Cutout 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Cutout/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Cutout/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Contour/Cutout/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Diamond 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Donut 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Ellipse 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Hexagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Moire 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Octagon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Oval 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/RectCenter 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/RectCham 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/RectCorner 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/RectRound BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC – 41 – 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Thermal 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Triangle 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/StandardPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Arc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Arc/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Arc/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Line 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Line/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Line/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/Polygon 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Outline/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline/PolyBegin 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline/PolyStepCurve 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline/PolyStepSegment 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Polyline/LineDescRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text/Xform 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text/BoundingBox 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text/FontRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text/Color 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/Text/ColorRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/UserSpecial 61182-2/Ecad/CadData/Step/LayerFeature/Set/Features/UserPrimitiveRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/Color 61182-2/Ecad/CadData/Step/LayerFeature/Set/ColorRef 61182-2/Ecad/CadData/Step/LayerFeature/Set/LineDesc 61182-2/Ecad/CadData/Step/LayerFeature/Set/LineDescRef 61182-2/Ecad/CadData/Step/DfxMeasurementList 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Arc 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Arc/LineDesc 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Arc/LineDescRef 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Line 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Line/LineDesc 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Line/LineDescRef 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/Polygon 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/Polygon/PolyBegin 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/Polygon/PolyStepCurve 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/Polygon/PolyStepSegment 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/LineDesc 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Outline/LineDescRef 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline/PolyBegin 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline/PolyStepCurve 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline/PolyStepSegment 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline/LineDesc 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/Polyline/LineDescRef 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/FeatureDescription 61182-2/Ecad/CadData/Step/DfxMeasurementList/DfxMeasurement/FeatureDescription/Location – 42 – BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 Bibliography IEC 61182-2-1, Printed board assembly products – Manufacturing description data and transfer methodology – Part 2-1: Sectional requirements for implementation of printed board design data description IEC 61182-2-3, Printed board assembly products – Manufacturing description data and transfer methodology – Part 2-3: Sectional requirements for implementation of printed board assembly data description IEC 61182-2-4, Printed board assembly products – Manufacturing description data and transfer methodology – Part 2-4: Sectional requirements for implementation of printed board test data description IEC 61188-5-1, Printed boards and printed board assemblies – Design and use – Part 5-1: Attachment (land/joint) considerations – Generic requirements IEC 61188-5-2, Printed boards and printed board assemblies – Design and use – Part 5-2: Attachment (land/joint) considerations – Discrete components IEC 61188-5-3, Printed boards and printed board assemblies – Design and use – Part 5-3: Attachment (land/joint) considerations – Components with gull-wing leads on two sides IEC 61188-5-4, Printed boards and printed board assemblies – Design and use – Part 5-4: Attachment (land/joint) considerations – Components with J leads on two sides IEC 61188-5-5, Printed boards and printed board assemblies – Design and use – Part 5-5: Attachment (land/joint) considerations – Components with gull-wing leads on four sides IEC 61188-5-6, Printed boards and printed board assemblies – Design and use – Part 5-6: Attachment (land/joint) considerations – Chip carriers with J-leads on four sides IEC 61188-5-8, Printed boards and printed board assemblies – Design and use – Part 5-8: Attachment (land/joint) considerations – Area array components (BGA, FBGA, CGA, LGA) IPC-T-50, Terms and Definitions for Interconnecting and Packaging Electronic Circuits IPC-D-310, Circuits Guidelines for Artwork Generation and Measurement Techniques for Printed IPC-D-325, Drawings Documentation Requirements for Printed Boards, Assemblies and Support IPC-2221, IPC-2501, Design Standard for Rigid Printed Boards and Rigid Printed Board Assemblies Definition for Web-Based Exchange of XML Data IPC-2511, Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer XML Schema Methodology IPC-2581, Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology IPC-2582, Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description BS EN 61182-2-2:2012 61182-2-2 © IEC:2012 IPC-2583, Sectional Requirements Manufacturing Data Description – 43 – for Implementation of Drawing Methods for IPC-2584, Sectional Requirements for Implementation of Printed Board Fabrication Data Description IPC-2588, Sectional Requirements for Implementation of Part List Product Data Description IPC-2614, Sectional Requirements for Board Fabrication Documentation IPC-2615, Printed Board Dimensions and Tolerances IPC-7351, Generic Requirements for Surface Mount Design and Land Pattern Standard ANSI X3/TR-1-77, American National Dictionary for Information Processing ANSI X3.12, Subroutine Record Format Standardization ANSI Y14.5, Dimensioning and Tolerancing for Engineering Drawing ANSI Y32.1, Logic Diagram Standards ANSI Y32.16, Electrical and Electrical Reference Designators ANSI Z210.1, Metric Practice Guide (ASTM 380-72) DoD-STD-100, EDIF 0, Engineering Drawings Electronic Data Interchange Format ISO 10303-210, lndustrial automation systems and integration – Product data representation and exchange – Part 210: Application protocol: Electronic assembly, interconnect, and packaging design ISO 10303-212, lndustrial automation systems and integration – Product data representation and exchange – Part 212: Electrotechnical design and installation AP220, Process Planning, Manufacturing, and Assembly of Layered Electronic Products AP221, Process Plant Functional Data & Schematic Representation _ This page deliberately left blank This page deliberately left blank British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services It presents the UK view on standards in Europe and at the international level BSI is incorporated by Royal Charter British Standards and other standardisation products are published by BSI Standards Limited Revisions Information on standards British Standards and PASs are periodically updated by amendment or revision Users of British Standards and PASs should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Similary for PASs, please notify BSI Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI provides a wide range of information on national, European and international standards through its Knowledge Centre BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: plus@bsigroup.com Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website www.bsigroup.com/shop In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: knowledgecentre@bsigroup.com BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards and PASs via British Standards Online can be found at www.bsigroup.com/BSOL Further information about British Standards is available on the BSI website at www.bsi-group.com/standards Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright & Licensing Department Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com BSI 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards raising standards worldwide™