BRITISH STANDARD BS EN 60335 2 56 2003 +A1 2008 Household and similar electrical appliances — Safety — Part 2 56 Particular requirements for projectors and similar appliances ICS 37 060 10; 97 180 BS[.]
BRITISH STANDARD Household and similar electrical appliances — Safety — Part 2-56: Particular requirements for projectors and similar appliances ICS 37.060.10; 97.180 BS EN EN 60335-2-56:2003 60335-2-56:2003 +A2:2014 +A1:2008 BS EN 60335-2-56:2003+A2:2014 National foreword This British Standard is the UK implementation of EN 60335-2-56:2003+A2:2014 It is identical to IEC 60335-2-56:2002, incorporating amendment 1:2008 and amendment 2:2014 It supersedes BS EN 60335-2-56:2003+A1:2008, which will be withdrawn on 16 September 2017 The start and finish of text introduced or altered by amendment is indicated in the text by tags Tags indicating changes to IEC text carry the number of the IEC amendment For example, text altered by IEC amendment is indicated by The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/1, Motorized appliance group A list of organizations represented on this subcommittee can be obtained on request to its secretary The publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 July 2003 © The British Standards Institution 2014 Published by BSI Standards Limited 2014 ISBN 978 580 85790 Amendments/corrigenda issued since publication Date Comments 30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008 30 November 2014 Implementation of IEC amendment 2:2014 with CENELEC endorsement A2:2014 EUROPEAN STANDARD EN 60335-2-56:2003+A2 60335-2-56:2003+A1 NORME EUROPÉENNE EUROPÄISCHE NORM November July 20082014 ICS 13.120; 37.060.10; 97.180 Supersedes EN 60335-2-56:1997 English version Household and similar electrical appliances Safety Part 2-56: Particular requirements for projectors and similar appliances (IEC 60335-2-56:2002) Appareils électrodomestiques et analogues Sécurité Partie 2-56: Règles particulières pour les projecteurs d'images et appareils analogues (CEI 60335-2-56:2002) Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke Teil 2-56: Besondere Anforderungen für Projektoren und ähnliche Geräte (IEC 60335-2-56:2002) This European Standard was approved by CENELEC on 2003-03-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels © 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 60335-2-56:2003 E Page Page 22 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Foreword The text of the International Standard IEC 60335-2-56:2002 (61/2171/FDIS), prepared by the IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-56 on 2003-03-01 This European Standard replaces EN 60335-2-56:1997 The following dates are applicable: - - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-03-01 date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 This part has to be used in conjunction with EN 60335-1, Household and similar electrical appliances – Safety – Part 1: General requirements It was established on the basis of the 2002 edition of that standard Amendments and revisions of Part have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part This part supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric projectors and similar appliances When a particular subclause of Part is not mentioned in this part 2, that subclause applies as far as is reasonable When this standard states "addition", "modification" or "replacement", the relevant text of Part is to be adapted accordingly NOTE The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z NOTE The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type Words in bold in the text are defined in Clause When a definition concerns an adjective, the adjective and the associated noun are also in bold There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1 There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1 _ BS Page 33 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive Endorsement notice The text of the International Standard IEC 60335-2-56:2002 was approved by CENELEC as a European Standard without any modification Foreword to amendment A1 The text of document 61/3557/FDIS, future amendment to IEC 60335-2-56:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-56:2003 on 2008-05-01 The following dates are applicable: - - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-56:2003 There are no special national conditions causing a deviation from this amendment There are no national deviations from this amendment Endorsement notice The text of amendment 1:2008 to the International Standard IEC 60335-2-56:2002 was approved by CENELEC as an amendment to the European Standard without any modification In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified) Page Page 44 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 EN 60335-2-56:2003/A2:2014 -2- ForewordForeword to amendment A2 The text of document 61/4683/CDV, future IEC 60335-2-56:2002/A2, prepared by IEC/TC 61 “Safety of household and similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60335-2-56:2003/A2:2014 The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-09-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60335-2-56:2002/A2:2014 was approved by CENELEC as a European Standard without any modification In the Bibliography of EN 60335-2-56:2003, replace the first sentence by “The Bibliography of EN 60335-1:2002 is applicable” and delete the following note for the standard indicated: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified) BS Page 55 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 CONTENTS INTRODUCTION Scope .7 Normative references .8 Terms and definitions Definitions General requirement .10 General conditions for the tests 10 Classification 11 Marking and instructions 11 Protection against access to live parts 11 Starting of motor-operated appliances 11 10 Power input and current 11 11 Heating 11 12 Void 12 13 Leakage current and electric strength at operating temperature 12 14 Transient overvoltages 12 15 Moisture resistance 12 16 Leakage current and electric strength 12 17 Overload protection of transformers and associated circuits 12 18 Endurance 12 19 Abnormal operation 13 20 Stability and mechanical hazards 13 21 Mechanical strength 14 22 Construction 14 23 Internal wiring 14 24 Components 14 25 Supply connection and external flexible cords 14 26 Terminals for external conductors 15 27 Provision for earthing 15 28 Screws and connections 15 29 Clearances, creepage distances and solid insulation 15 30 Resistance to heat and fire 15 31 Resistance to rusting 15 32 Radiation, toxicity and similar hazards 15 Annexes 16 Bibliography 16 Table 101 – Temperature rise limits 12 Page Page 66 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains However, national wiring rules may differ If an appliance within the scope of this standard also incorporates functions that are covered by another Part of IEC 60335, the relevant Part is applied to each function separately, as far as is reasonable If applicable, the influence of one function on the other is taken into account When a Part standard does not include additional requirements to cover hazards dealt with in Part 1, Part applies NOTE This means that the technical committees responsible for the Part standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject NOTE Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part or P art standards An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard BS Page 77 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY – Part 2-56: Particular requirements for projectors and similar appliances Scope This clause of Part is replaced by the following This International Standard deals with the safety of electric projectors and similar appliances for household and similar purposes, their rated voltage being not more than 250 V NOTE 101 – Examples of appliances that are within the scope of this standard are effects projectors; – film-strip projectors; – film viewers; – microscope projectors; – motion-picture projectors; – opaque projectors (episcopes); – opaque-transparency projectors (epidiascopes); – overhead projectors; – photographic enlargers; – photo-reproduction appliances; – slide projectors (diascopes); – slide-sorting appliances – still viewers Appliances may incorporate sound amplifiers Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended for use by laymen in schools, offices, shops and similar locations are within the scope of this standard As far as practicable, this standard deals with the common hazards presented by appliances which are encountered by all persons in and around the home However, in general, it does not take into account !– persons (including children) whose • physical, sensory or mental capabilities; or • lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; – children playing with the appliance " NOTES 102 Attention is drawn to the fact that – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; – in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, and similar authorities – IEC 60598-1 is applicable as far as is reasonable Page Page 88 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 NOTE 103 This standard does not apply to: – LCD and video projectors (IEC 60065); – micrographic office equipment (IEC 60950); – motion picture projectors for films having a width exceeding 16 mm; – appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); – appliances for medical purposes (IEC 60601) Normative references This clause of Part is applicable 3 Terms and definitions Definitions This clause of Part is applicable except as follows 3.1.9 Replacement: normal operation operation of the appliance as in normal use under the following conditions Semi-automatic slide projectors are operated with the slide carrier filled and with the slide changing mechanism operated every 10 s Fully-automatic slide projectors are operated with the slide carrier filled and with the control for the slide changing mechanism adjusted for the most unfavourable speed If necessary, the projector is reloaded with slides as quickly as possible Semi-automatic film-strip projectors are operated with the longest film that can be accommodated and with the frame changing mechanism operated every 10 s Fully-automatic film-strip projectors are operated with the longest film that can be accommodated and with the control adjusted to give the most unfavourable period for viewing the frames If necessary, the projector is reloaded with film strips as quickly as possible Motion-picture projectors and film viewers are operated in cycles using the longest film that can be accommodated Each cycle consists of a period during which the film is projected, followed by a period during which the film is fully rewound Fans are not manually switched off Photographic enlargers, with a film strip in position, and photo-reproduction appliances are operated in cycles Each cycle consists of a period of operation of followed by a rest period of Opaque projectors are operated with a neutral grey card of a sufficient size to completely cover the object field NOTE 101 The neutral grey card is made of mm thick cardboard having a grey side with 18 % reflectance and a white side with 90 % reflectance Other appliances are operated with the appropriate visual media in position BS Page 99 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Audio amplifiers are operated in accordance with the conditions of normal operation specified in subclause 4.2.6 of IEC 60065 Manually-switched motors for adjusting the lens are operated for the time necessary to move the lens from one extreme position to the other This operation is carried out once every for manually-operated projectors and after each 18 frames have been projected for other projectors 3.101 slide projector appliance for the still projection of slides 3.102 manually-operated slide projector slide projector in which the slides are changed by hand 3.103 semi-automatic slide projector slide projector in which the slides are changed automatically, each operation being initiated manually 3.104 fully-automatic slide projector slide projector in which the slides are changed automatically, each operation being initiated by a timer, tape recorder or other automatic means 3.105 overhead projector appliance with a large object field intended for the still projection of positive transparencies 3.106 opaque projector appliance for the still projection of non-transparent positives 3.107 opaque-transparency projector combination of a slide projector and an opaque projector 3.108 microscope projector appliance that projects microscope slides 3.109 effects projector appliance for generating optical effects NOTE Optical effects may be produced by projecting film loops, rotating disks or other means 3.110 still viewer appliance for directly viewing an image from a slide or film strip Page Page 10 10 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 3.111 film viewer appliance for viewing motion picture film on an integral screen 3.112 motion-picture projector appliance for the diascopic projection of motion picture film 3.113 photo-reproduction appliance appliance for photographing drawings, transparencies, printed matter and other objects 3.114 photographic enlarger appliance for producing enlarged photographic prints 3.115 film-strip projector appliance for the sequential or random projection of individual frames in a film strip or loop 3.116 manually-operated film-strip projector film-strip projector in which the individual frames are selected by manual action 3.117 semi-automatic film-strip projector film-strip projector in which individual frames are selected automatically, each operation being initiated manually 3.118 fully-automatic film-strip projector film-strip projector in which individual frames are selected automatically, each operation being initiated by a timer, tape recorder or other automatic means 3.119 slide-sorting appliance appliance for manual selection of transparencies that are illuminated from the rear by artificial light General requirement This clause of Part is applicable General conditions for the tests This clause of Part is applicable except as follows 5.6 Addition: Lamp intensities are adjusted to the highest setting 5.101 Appliances are tested as motor-operated appliances BS Page 11 11 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Classification This clause of Part is applicable Marking and instructions This clause of Part is applicable except as follows 7.1 Addition: Appliances shall be marked on or near the lampholder with the power input of replaceable projection lamps as follows: lamp W The word “lamp” may be replaced by symbol !IEC 60417-5012 (2002-10)" The rated voltage of the lamp shall also be marked 7.12 Addition: The instructions shall state that ventilation openings are not to be obstructed during operation of the appliance The instructions shall state the rated voltage, rated power input and model or type reference of replaceable lamps They shall include the substance of the following: – disconnect from the supply before changing the lamp; – allow the appliance to cool before touching the lamp or parts of the optical system 7.15 Addition: The marking related to replaceable projection lamps shall be visible during replacement of the lamp Protection against access to live parts This clause of Part is applicable Starting of motor-operated appliances This clause of Part is not applicable 10 Power input and current This clause of Part is applicable 11 Heating This clause of Part is applicable except as follows Page Page 12 12 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 11.7 Replacement: Appliances are operated until steady conditions are established 11.8 Addition: Temperatures rises shall not exceed the values shown in Table 101 Table 101 – Temperature rise limits Part Temperature rise K Accessible ventilation grilles – – of metal other material 80 100 Neutral grey card 150 a Accessible lens of overhead projectors 120 b a The temperature rise is measured on the white side of the card, the grey side facing the lamp b The temperature rise shall not exceed 100 K when the lamp has been switched off for 12 Void 13 Leakage current and electric strength at operating temperature This clause of Part is applicable 14 Transient overvoltages This clause of Part is applicable 15 Moisture resistance This clause of Part is applicable 16 Leakage current and electric strength This clause of Part is applicable 17 Overload protection of transformers and associated circuits This clause of Part is applicable except as follows NOTE 101 Lamps without filaments are not considered to cause short circuits 18 Endurance This clause of Part is not applicable BS Page 13 13 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 19 Abnormal operation This clause of Part is applicable except as follows 19.1 Modification: Instead of the tests specified, compliance is checked by the tests of 19.7, 19.10 to 19.12 and 19.101 19.7 Addition: The following appliances are operated for min: – film viewers; – manually-operated film-strip projectors; – manually-operated slide projectors; – microscope projectors; – overhead projectors; – opaque projectors; – photographic enlargers; – photo-reproduction appliances; – semi-automatic film-strip projectors; – semi-automatic slide projectors; – slide-sorting appliances; – still viewers 19.101 The appliance is supplied at rated voltage and operated under normal operation Any fault condition that can be expected during normal use is applied one at a time During the test, the temperature of the windings shall not exceed the values shown in Table NOTE Examples of fault conditions are – breakage of fan belts The test is continued until steady conditions are established even if the lamp fails; – covering of ventilation openings that are likely to be covered simultaneously on one side In general, tests are limited to the fault conditions that may be expected to give the most unfavourable results 20 Stability and mechanical hazards This clause of Part is applicable except as follows 20.1 Addition: Motion-picture projectors are loaded with the longest film that can be wound on the most unfavourable reel Slide projectors are loaded with slides Page Page 14 14 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 Page 14 EN 60335-2-56:2003+A2:2014 BS EN 60335-2-56:2003+A1:2008 21 Mechanical strength 21 Mechanical strength This clause of Part is applicable except as follows This clause of Part is applicable except as follows ! 21.1 Addition:" ! 21.1 Addition:" Remote control units that are held in the hand in normal use, other than those operating at safety extra-low voltage, are also subjected to the test of 21.101 Remote control units that are held in the hand in normal use, other than those operating at safety extra-low voltage, are also subjected to the test of 21.101 21.101 unit unit is subjected to the – procedure2,2, of of 21.101 The The remote remotecontrol control is subjected to test the free-fall free-fallrepeated test, procedure IEC 60068-2-32, lengthofof100 100mm mm.The The number of falls IEC 60068‑2-31 any , anycord cordbeing being cut cut to a length number of falls is is 21.101 The remote control unit is subjected to the free-fall test, procedure 2, of IEC100, 60068-2-32, anyofcord being cut not to aexceed length of 100 – if the mass the unit does 250 g; mm The number of falls is – – 50, other units 100,for if the mass of the unit does not exceed 250 g; – 50,the for test, otherthe units After unit shall not be damaged to such an extent that compliance with this standard is impaired After the test, the unit shall not be damaged to such an extent that compliance with this standard is impaired The height of the fall is 500 mm. 22 Construction 22 Construction This clause of Part is applicable except as follows This clause of Part is applicable except as follows 22.101 Appliances having tungsten-halogen lamps be constructed so that glass particles are not ejected 22.101 Appliances having tungsten-halogen lamps be constructed so that glass particles are not ejected Compliance is checked by inspection or high-pressure discharge lamps shall from the appliance if the lamp fractures or high-pressure discharge lamps shall from the appliance if the lamp fractures Compliance is checked by inspection 23 Internal wiring 23 Internal wiring This clause of Part is applicable This clause of Part is applicable 24 Components 24 Components This clause of Part is applicable except as follows This clause of Part is applicable except as follows 24.2 Modification: 24.2 Modification: Switches in flexible cords are allowed if the length of cord between the switch and the appliance does not exceed 500 mm Switches in flexible cords are allowed if the length of cord between the switch and the appliance does not exceed 500 mm 25 Supply connection and external flexible cords 25 Supply connection and external flexible cords This clause of Part is applicable except as follows This clause of Part is applicable except as follows 25.23 Addition: 25.23requirement Addition: does not apply to interconnection cords supplied at safety extra-low The voltage The requirement does not apply to interconnection cords supplied at safety extra-low voltage BS 26 Terminals for external conductors This clause of Part is applicable 27 Provision for earthing This clause of Part is applicable 28 Screws and connections This clause of Part is applicable 29 Clearances, creepage distances and solid insulation This clause of Part is applicable 30 Resistance to heat and fire This clause of Part is applicable except as follows 30.2 Addition: For the following appliances, 30.2.2 is applicable: – film viewers; – manually-operated film-strip projectors; – manually-operated slide projectors; – microscope projectors; – overhead projectors; – opaque projectors; – photographic enlargers; – photo-reproduction appliances; – semi-automatic film-strip projectors; – semi-automatic slide projectors; – slide-sorting appliances; – still viewers For other appliances, 30.2.3 is applicable 31 Resistance to rusting This clause of Part is applicable 32 Radiation, toxicity and similar hazards This clause of Part is applicable Page 15 15 Page BS EN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Page Page 16 16 BS BSEN60335-2-56:2003+A2:2014 EN 60335-2-56:2003+A1:2008 EN 60335-2-56:2003+A2:2014 Annexes The annexes of Part are applicable Bibliography The Part is1 applicable The bibliography bibliographyofof Part is applicable except as follows Text deleted Addition: !ISO 13732-1, Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces " _ blank BS EN 60335-2-56:2003 60335-3-56:2003 +A1:2008 +A2:2014 British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com You may also buy directly using a debit/credit card from the BSI Shop on the Website http://www.bsigroup.com/shop In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact the Information Centre Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at http://www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at http://www.bsigroup.com Copyright BSI Group Headquarters 389 Chiswick High Road, London W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright & Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com