ASME Boiler and Pressure Vessel Code SECTION VIII 2 INTERPRETATIONS Volume 57 Interpretations of the Code are distributed annually in July with the issuance of the edition and subsequent addenda Inter[.]
ASME Boiler and Pressure Vessel Code SECTION VIII-2 INTERPRETATIONS Volume 57 Interpretations of the Code are distributed annually in July with the issuance of the edition and subsequent addenda Interpretations posted in January at www.cstools.asme.org/interpretations are included in the July distribution Interpretations of Section III, Divisions and 2, are part of the update service to Section III, Subsection NCA ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Interpretations Volumes 54 through 56 were included with the update service to the 2004 Edition of the Code; Volume 57 is the first Interpretations volume to be included with the update service to the 2007 Edition Section I II-A II-B II-C II-D (Customary) II-D (Metric) III-NCA III-3 IV V VI VII VIII-1 VIII-2 VIII-3 IX X XI XII Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Vol 57 Vol 58 /07 /07 /07 /07 /07 /07 /07 /07 /07 /07 /07 /07 Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT Vol 59 Copyright © 2007 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT SECTION VIII-2 — INTERPRETATIONS VOL 57 INTERPRETATIONS VOLUME 57 — SECTION VIII-2 Replies to Technical Inquiries January 1, 2006 Through December 31, 2006 FOREWORD General Information ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code A contents is also included which lists subjects specific to the interpretations covered in the individual volume These interpretations are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity In some instances, a review of the interpretation revealed a need for corrections of a technical nature In these cases, a revised interpretation is presented bearing the original interpretation number with the suffix R and the original file number with an asterisk Following these revised interpretations, new interpretations and revisions to them issued during the indicated dates are assigned interpretation numbers in chronological order Interpretations applying to more than one Code Section appear with the interpretations for each affected Section ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee As stated in the Statement of Policy in the Code documents, ASME does not “approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity An interpretation applies either to the Edition and Addenda in effect on the date of issuance of the interpretation or the Edition and Addenda stated in the interpretation Subsequent revisions to the Code may supersede the interpretation For detailed instructions on preparation of technical inquiries to the ASME Boiler and Pressure Vessel Committee, refer to Appendix 21 Subject and Numerical Indexes Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code They cover interpretations issued from Volume 12 up to and including the present volume, and will be updated with each volume 269 Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT SECTION VIII-2 — INTERPRETATIONS VOL 57 SECTION VIII-2 Subject Interpretation BC04-650 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - AD-100(c) VIII-2-04-12 File No 270 Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT SECTION VIII-2 — INTERPRETATIONS VOL 57 Interpretation: VIII-2-04-12 Subject: Section VIII, Division (2001 Edition, 2003 Addenda); AD-100(c) Date Issued: June 15, 2006 File: BC04-650 Question (1): Do the provisions of AD-100(c) permit the Designer to use stress analysis instead of any of the provisions in Articles D-1 and D-4? Reply (1): No, except as provided for in AD-101 and AD-420 Question (2): Do the provisions of AD-100(c) permit the Designer to use stress analysis in accordance with the requirements of Appendices and in lieu of the rules in AD-210 for transition sections? Reply (2): Yes Question (3): Do the provisions of AD-100(c) permit the Designer to use stress analysis in accordance with the requirements of Appendices and in lieu of the rules in Article D-5 for nozzles and other connections? Reply (3): Yes Question (4): Do the provisions of AD-100(c) permit the Designer to use stress analysis in accordance with the requirements of Appendices and in lieu of the rules in Article D-7 for flat heads and bolted and studded connections? Reply (4): Yes Question (5): Do the provisions of AD-100(c) permit the Designer to use stress analysis in accordance with the requirements of Appendices and in lieu of the rules in Articles D-8, D-9, or D-10? Reply (5): No, except for AD-911, AD-912, and AD-940 271 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - 272 Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT SECTION VIII-2 — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 NUMERICAL INDEX Location Table ABM-1 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Table ABM-1.2 Table ACS-1 Table ACS-2 AD-100 AD-100(b) AD-100(c) AD-102 AD-110(a) AD-132.2 AD-140 AD-140.1 Table AD-150.1 AD-151.1 AD-160 AD-160.2 AD-200 AD-204 AD-210 AD-340 AD-400 AD-451 AD-510(c) AD-520 Fig AD-540.1 AD-540.1(b) AD-540.2(a) AD-550 AD-550(f) Fig AD-610.1 Fig AD-613.1 Fig AD-701.1 sketch (b) AD-702 AD-900 AD-900(c)(1) AD-912 AD-1101(b) AF-111 Interpretation File No Page No VIII-81-49R VIII-2-83-08 VIII-2-83-29 VIII-2-83-19 VIII-2-83-19 VIII-2-86-17 VIII-2-89-01 VIII-2-04-12 VIII-2-95-03 VIII-2-83-18 VIII-2-83-22 VIII-2-83-15 VIII-2-83-35R VIII-2-83-35R-2 VIII-2-83-26 VIII-2-98-02 VIII-2-01-12 VIII-2-04-07 VIII-2-83-35R VIII-2-83-35R-2 VIII-2-83-38 VIII-2-89-02 VIII-2-92-12 VIII-2-83-20 VIII-2-98-02 VIII-2-83-33 VIII-2-89-05 VIII-2-83-15 VIII-2-86-18 VIII-2-89-17 VIII-2-92-11 VIII-2-83-39 VIII-2-92-13 VIII-2-89-07 VIII-2-83-39 VIII-2-83-39 VIII-2-83-09 VIII-2-83-33 VIII-2-98-05 VIII-2-86-06 BC80-725* BC80-725 BC83-385 BC83-135 BC83-135 BC87-427 BC87-198 BC04-650 BC94-617 BC82-652 BC83-245 BC82-296 BC83-653* BC83-653** BC83-221 BC97-511 BC01-822 BC04-1553 BC83-653* BC83-653** BC83-644 BC87-298 BC93-347 BC83-169 BC97-511 BC80-606 BC89-008 BC82-296 BC88-079 BC90-654 BC92-384 BC84-138 BC93-416 BC89-227 BC84-138 BC84-138 BC82-861 BC80-606 BC98-051 BC86-377 13 28 23 23 85 91 271 165 23 25 16 45 45 27 202 243 267 45 45 38 91 147 24 202 35 97 16 85 115 147 39 153 103 39 39 13 35 207 71 AF-112.1 AF-135(a) AF-140.1 AF-145(a) AF-200(b) VIII-2-89-14 VIII-2-04-01 VIII-2-83-14 VIII-2-04-03 VIII-2-89-16 VIII-2-89-16R VIII-2-89-13 BC90-436 BC03-1249 BC82-208 BC04-271 BC90-533 BC90-533* BC90-344 110 259 16 263 115 121 110 AG-110 AG-120(a) AG-120(a)(3) AG-121(a)(1) AG-121(c) AG-121(e) AG-121.1 Location AF-210 AF-210.1(b)(2) AF-220 AF-221.2 AF-222.3 AF-223.2 Table AF-226.1 AF-229.1 AF-234 Table AF-241.1 AF-320 AF-334 AF-402 Table AF-402.1 AF-402.2 AF-415(e) AF-420 AF-540 AF-551 AF-552 AF-563 AF-572.2 AF-605 AF-630 AF-635 AF-805.1(a)(2) Fig AF-810.1 AF-810.20(b) AF-810.20(d) AF-815.1 AF-820 (a) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT Interpretation VIII-2-83-06 VIII-2-92-06 VIII-2-92-09 VIII-2-92-03 VIII-2-83-30 VIII-2-83-30R VIII-2-89-12 VIII-2-92-17 VIII-2-98-01 VIII-2-98-07 VIII-2-98-07 VIII-2-98-06 VIII-2-95-11 VIII-2-83-34 VIII-2-83-36 VIII-2-83-03 VIII-2-89-04 VIII-2-01-11 VIII-2-83-31 VIII-2-01-07 VIII-2-92-18 VIII-2-83-24 VIII-2-83-43 VIII-2-83-06 VIII-2-83-30 VIII-2-83-30R VIII-2-83-28 VIII-2-83-28 VIII-2-89-10 VIII-2-86-10 VIII-2-95-05 VIII-2-83-31 VIII-2-89-03 VIII-2-92-10 VIII-2-04-02 VIII-2-86-02 VIII-2-04-02 VIII-2-04-05 VIII-2-83-31 VIII-2-83-45 VIII-2-89-18 VIII-2-83-26 VIII-2-86-11 VIII-2-98-13 VIII-2-89-19 VIII-2-04-04 VIII-2-98-14 VIII-2-01-10 File No Page No BC81-656 BC92-150 BC92-349 BC91-465 BC83-540 BC83-540* BC88-426C BC94-107 BC97-264 BC98-228 BC98-228 BC98-053 BC94-422 BC83-652A BC83-683 BC82-513 BC88-213 BC01-792 BC83-341 BC01-316 BC94-278 BC82-736 BC84-371 BC81-656 BC83-540 BC83-540* BC81-531 BC81-531 BC89-399 BC87-066 BC95-049 BC83-341 BC88-126 BC92-109 BC03-1646 BC85-330 BC03-1646 BC04-060 BC83-341 BC84-003 BC90-729 BC83-221 BC86-073 BC99-275 BC90-652 BC03-1277 BC99-273 BC01-404 136 141 130 29 51 109 159 201 213 213 208 189 36 37 92 243 35 237 160 26 52 29 51 28 28 109 72 171 35 91 142 259 59 259 263 35 53 116 27 73 220 121 263 225 243 SECTION VIII-2 — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Location Interpretation File No Page No AG-130 VIII-2-83-04 VIII-2-89-21 VIII-2-86-04 VIII-2-89-09 VIII-2-01-14 VIII-2-98-08 VIII-2-86-03 VIII-2-83-04 VIII-2-98-16 VIII-2-92-14 VIII-2-86-05 VIII-2-92-14 VIII-2-95-15 VIII-2-98-17 VIII-2-83-27 VIII-2-86-12 VIII-2-98-05 VIII-2-92-18 VIII-2-83-37 VIII-2-86-09 VIII-2-86-10 VIII-2-89-11 VIII-2-98-04 VIII-2-01-06 VIII-2-83-41 VIII-2-83-01 VIII-2-86-03 VIII-2-83-10 VIII-2-83-10 VIII-2-83-34 VIII-2-98-11 VIII-2-98-18 VIII-2-95-15 VIII-2-83-09 VIII-2-95-04 VIII-2-01-04 VIII-2-01-08 VIII-2-83-07 VIII-2-83-38 VIII-2-04-10 VIII-2-83-35R VIII-2-83-35R-2 VIII-2-83-13 VIII-2-83-16 VIII-2-86-15 VIII-2-83-35 VIII-2-04-09 VIII-2-01-05 VIII-2-04-06 VIII-2-86-01 VIII-2-86-01R VIII-2-01-04 VIII-2-83-07 VIII-2-98-10 BC82-548 BC90-775 BC86-201 BC89-356 BC02-3285 BC98-229 BC85-145 BC82-548 BC99-496 BC93-590 BC86-230 BC93-590 BC96-306 BC00-288 BC83-266 BC87-026 BC98-051 BC94-278 BC83-687A BC87-065 BC87-066 BC89-412 BC98-052 BC01-217 BC84-339 BC81-362 BC85-145 BC83-072 BC83-072 BC83-652A BC98-086 BC98-366 BC96-306 BC82-861 BC94-502 BC01-195 BC01-380 BC82-680 BC83-644 BC05-680 BC83-653* BC83-653** BC81-717 BC82-584 BC85-288 BC83-653 BC05-678 BC01-206 BC03-773 BC85-218 BC85-218* BC01-195 BC82-680 BC98-049 122 66 103 251 213 65 231 153 66 153 190 231 27 79 207 160 38 72 72 109 207 237 46 65 14 14 36 219 231 190 13 171 236 238 38 268 45 45 15 16 80 36 267 236 264 59 65 236 214 AG-140 AG-301.1 AG-301.2 AG-303 Table AHA-1 AI-101 AI-101(b)(6) AI-102(b)(12) AI-110 AM-100 AM-101 AM-105.1(a) AM-201.4 AM-201.4(c) AM-202 AM-203.2 AM-203.2(b)(2) AM-204 AM-213 Table AM-214.1 Table AM-214.2 Fig AM-218.1 AM-218.2(a)(2) AM-311.2 AM-600 Table AMG-1 Appendix I, Table I-220 Appendix 3, 3-320 Appendix 4, 4-112 Appendix 4, 4-112(a) Appendix 4, 4-112(m) Appendix 4, Table 4-120.1 Appendix 4, Fig 4-130.1 Appendix 4, 4-134 Appendix 4, 4-136.7 Appendix 4, 4-136.7(a) Appendix 4, 4-136.7(b) Appendix 4, 4-140 Appendix 5, 5-110.3(a) Appendix 8, 8-120(b) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Location Appendix 9, 9-103 Appendix 9, 9-320 Appendix 11 Appendix 18 Appendix 20, 20-230 Table AQT-1 AR-200(b) AR-230(d) Article 4-3 Article D-11 Article F-8 Article T AS-100 AS-110 AS-120 AS-130 AS-130(a) AS-201 AS-204 AS-310(a) AS-320(a) AT-112 AT-113 AT-115.1 AT-200(b) AT-201(a), (b) AT-202(a) AT-202(b) AT-202.3(b) AT-203 AT-203(a) AT-203(b) AT-300 AT-355 AT-510 Code Case 1961 Code Case 1986-2 Code Case 2211 Code Case 2235 Foreword Interpretation statement (b) Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT Interpretation VIII-2-83-02 VIII-2-89-24 VIII-2-83-44R VIII-2-86-07 VIII-2-83-25 VIII-2-92-16 VIII-2-98-12 VIII-2-86-06 VIII-2-86-08 VIII-2-83-23 VIII-2-83-12 VIII-2-95-08 VIII-2-83-11 VIII-2-83-42 VIII-2-83-32 VIII-2-83-34 VIII-2-04-08 VIII-2-95-02 VIII-2-95-16 VIII-2-95-16 VIII-2-95-02 VIII-2-95-12 VIII-2-95-13 VIII-2-95-13R VIII-2-92-16 VIII-2-92-08 VIII-2-01-02 VIII-2-86-16 VIII-2-92-18 VIII-2-95-07 VIII-2-95-06 VIII-2-01-03 VIII-2-95-10 VIII-2-83-34 VIII-2-89-22 VIII-2-01-01 VIII-2-01-03 VIII-2-89-08 VIII-2-92-04 VIII-2-92-17 VIII-2-89-20 VIII-2-92-07 VIII-2-92-15 VIII-2-83-10 VIII-2-92-02 VIII-2-01-15 VIII-2-95-14 VIII-2-86-14 VIII-2-89-06 VIII-2-01-13 VIII-2-98-09 VIII-2-95-04 VIII-2-95-17 File No Page No BC82-409 BC91-106 BC77-701* BC86-082 BC82-754B BC94-059 BC98-307 BC86-377 BC86-376 BC81-576 BC81-583 BC91-445 BC80-526 BC84-334 BC83-641 BC83-652A BC03-1819 BC92-382A BC96-537 BC96-537 BC92-382A BC95-465B BC96-128 BC96-128* BC94-059 BC92-295 BC01-102 BC86-105 BC94-278 BC95-316 BC95-217 BC01-190 BC96-127 BC83-652A BC90-341 BC01-097 BC01-190 BC89-288 BC92-050 BC94-107 BC90-862 BC92-221 BC93-629 BC83-072 BC91-514 BC01-774 BC96-377 BC87-195 BC89-112 BC99-084 BC98-327 BC94-502 BC96-134 123 53 71 26 159 219 71 71 25 15 183 14 51 35 36 267 165 195 195 165 189 189 201 159 141 235 85 160 177 177 235 184 36 122 235 235 103 135 159 122 141 154 14 129 255 190 79 97 247 213 171 201 SECTION VIII-2 — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - SUBJECT INDEX Subject Attachments Supports closures cylindrical shell lifting lugs structural attachments Authorized Inspection multiple authorized inspection agencies Authorized Inspector Bolting materials stresses Interpretation File No Page No VIII-2-04-01 VIII-2-04-03 VIII-2-83-14 VIII-2-83-01 BC03-1249 BC04-271 BC82-208 BC81-362 259 263 16 VIII-2-86-05 BC86-230 66 VIII-2-98-08 VIII-2-98-16 BC98-229 BC99-496 213 231 VIII-2-83-10 VIII-81-49R VIII-2-83-08 VIII-2-83-10 BC83-072 BC80-725* BC80-725 BC83-072 14 13 14 VIII-2-95-09 VIII-2-95-12 VIII-2-95-13 VIII-2-01-14 VIII-2-01-11 BC95-465A BC95-465B BC96-128 BC02-3285 BC03-1819 183 189 189 251 268 VIII-2-92-08 VIII-2-92-14 BC92-295 BC93-590 141 153 VIII-2-04-09 VIII-2-04-12 VIII-2-86-17 VIII-2-86-18 VIII-2-83-38 VIII-2-83-39 BC05-678 BC04-650 BC87-427 BC88-079 BC83-644 BC84-138 267 271 85 85 38 39 VIII-2-86-15 VIII-2-83-20 VIII-2-89-09 BC85-288 BC83-169 BC89-356 80 24 103 VIII-2-95-04 VIII-2-01-09 BC94-502 BC01-570 171 239 VIII-2-86-01 VIII-2-86-01R BC85-218 BC85-218* 59 65 VIII-2-89-21 VIII-2-95-13R BC90-775 BC96-128* 122 201 Subject Flanges proprietary bolts reverse stresses Data Reports Design analysis openings operating pressure cycles reinforcement limits stresses (see separate listing) thermal expansion of piping transition shell sections User’s Specification Elastic-Plastic Analysis value of Sa Field Sites 220 110 13 91 Forgings VIII-2-83-37 VIII-2-86-12 VIII-2-89-11 VIII-2-98-04 BC83-687A BC87-026 BC89-412 BC98-052 38 79 109 207 Heads VIII-2-89-13 VIII-2-89-23 VIII-2-95-03 VIII-2-92-06 VIII-2-92-12 BC90-344 BC91-175 BC94-617 BC92-150 BC93-347 110 123 165 136 147 VIII-2-95-05 VIII-2-01-01 BC95-049 BC01-097 171 235 VIII-2-04-07 VIII-2-95-01 VIII-2-92-02 VIII-2-83-10 VIII-2-83-40 BC04-1553 BC94-409 BC91-514 BC83-072 BC83-308 267 165 129 14 46 VIII-2-83-32 VIII-2-95-10 VIII-2-98-18 VIII-2-86-03 VIII-2-89-08 VIII-2-89-20 VIII-2-92-04 VIII-2-92-07 VIII-2-92-15 VIII-2-95-06 VIII-2-83-34 VIII-2-89-22 VIII-2-98-11 BC83-641 BC96-127 BC98-366 BC85-145 BC89-288 BC90-862 BC92-050 BC92-221 BC93-629 BC95-217 BC83-652A BC90-341 BC98-086 35 184 231 65 103 122 135 141 154 177 36 122 219 Interpretation Statement VIII-2-95-17 BC96-134 201 Layered Construction VIII-2-89-16 VIII-2-89-16R VIII-2-89-18 BC90-533 BC90-533* BC90-729 115 121 116 formed Hydrostatic Testing allowable stress applied coating bolted connections bolting stresses of interconnected vessels Impact Testing exemptions specimens temperature test plates welds with welding consumables (c) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Page No BC99-275 BC90-436 BC80-725* BC80-725 BC87-198 welding procedures Edition of Code File No VIII-2-98-13 VIII-2-89-14 VIII-81-49R VIII-2-83-08 VIII-2-89-01 Heat Treatment Certification Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT SECTION VIII-2 — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Interpretation Layered Construction (Cont’d) VIII-2-92-10 VIII-2-04-05 File No Page No BC92-109 BC04-060 142 263 BC82-409 Magnetic Particle Examination VIII-2-83-02 Manways VIII-2-92-17 BC94-107 159 Marking VIII-2-04-08 BC03-1819 267 Materials certification classification hardness testing manufacturer non-Code pressure vessels for human occupancy repair SA-105 SA-203 SA-350 SA-516 SA-533 SA-540 SA-553 SA-723 stock thickness use of Division material VIII-2-98-17 VIII-2-83-09 VIII-2-86-16 VIII-2-92-01 VIII-2-83-44R VIII-2-86-07 BC00-288 BC82-861 BC86-105 BC91-301 BC77-701* BC86-082 231 13 85 129 53 71 VIII-2-83-06 VIII-2-83-19 VIII-2-83-31 VIII-2-83-31 VIII-2-98-15 VIII-2-83-31 VIII-2-83-29 VIII-2-98-03 VIII-2-89-03 VIII-2-95-15 VIII-2-89-06 VIII-2-89-15 BC81-656 BC83-135 BC83-341 BC83-341 BC99-477 BC83-341 BC83-385 BC97-317 BC88-126 BC96-306 BC89-112 BC90-525 23 35 35 225 35 28 207 91 190 97 115 VIII-2-83-27 BC83-266 27 Multilayered Vessels impact testing postweld heat treatment shell thickness calculations spirally wound design thickness VIII-2-83-32 VIII-2-83-45 VIII-2-83-18 VIII-2-86-04 VIII-2-83-42 BC83-641 BC84-003 BC82-652 BC86-201 BC84-334 35 53 23 66 51 Nameplate VIII-2-95-02 BC92-382A 165 VIII-2-83-02 VIII-2-83-25 VIII-2-83-02 BC82-409 BC82-754B BC82-409 26 VIII-2-98-01 VIII-2-83-03 VIII-2-83-25 VIII-2-86-02 VIII-2-04-02 BC97-264 BC82-513 BC82-754B BC85-330 BC03-1646 201 26 59 259 VIII-2-98-05 VIII-2-98-06 BC98-051 BC98-053 207 208 Miscellaneous Pressure Parts Nondestructive Examination acceptance standards certification of personnel linear discontinuities methods (see separate listings) postweld heat treatment record keeping SNT-TC-1A welded layers Nozzles fabrication Subject File No Page No Nozzles (Cont’d) integral reinforced location weld categories VIII-2-95-11 VIII-2-83-15 VIII-2-83-33 BC94-422 BC82-296 BC80-606 189 16 35 Overpressure Protection VIII-2-01-13 BC99-084 247 Peening VIII-2-83-36 VIII-2-89-25 BC83-683 BC91-116 37 123 VIII-2-83-43 VIII-2-92-18 VIII-2-83-31 VIII-2-92-03 VIII-2-92-18 VIII-2-83-45 VIII-2-83-21 VIII-2-83-24 VIII-2-83-28 VIII-2-01-07 BC84-371 BC94-278 BC83-341 BC91-465 BC94-278 BC84-003 BC83-197 BC82-736 BC81-531 BC01-316 52 160 35 130 160 53 24 26 28 237 VIII-2-83-12 BC81-583 15 VIII-2-83-25 VIII-2-92-16 VIII-2-98-12 BC82-754B BC94-059 BC98-307 26 159 219 VIII-2-98-10 VIII-2-83-05 VIII-2-83-03 BC98-049 BC81-685B BC82-513 214 VIII-2-86-11 BC86-073 73 VIII-2-01-02 BC01-102 235 VIII-2-89-17 VIII-2-89-07 VIII-2-92-11 VIII-2-92-13 BC90-654 BC89-227 BC92-384 BC93-416 115 103 147 153 VIII-2-95-08 BC91-445 183 hyperbaric vessels pressure limits proprietary connections VIII-2-98-14 VIII-2-01-10 VIII-2-04-04 VIII-2-83-44R VIII-2-83-26 VIII-2-98-13 BC99-273 BC01-404 BC03-1277 BC77-701* BC83-221 BC99-275 225 243 263 53 27 220 Service Restrictions lethal service VIII-2-83-46 BC85-194 54 Postweld Heat Treatment cooling rate exemptions heating rate layered construction nozzle connections P-No material tubesheets Pressure Relief Valves spring setting Quality Control System multilocation organizations Radiographic Examination acceptance criteria penetrameters ultrasonic examinations in lieu of vessel boundaries Record Retention Reinforcement calculations limits Safety Relief Scope exemptions (d) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Subject SECTION VIII-2 — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Stamping use of ASME marking Interpretation File No Page No VIII-2-92-05 VIII-2-95-16 VIII-2-83-04 VIII-2-86-13 BC92-152 BC96-537 BC82-548 BC87-199 135 195 79 VIII-2-83-26 VIII-2-83-16 VIII-2-83-09 VIII-2-86-01R VIII-2-86-14 VIII-2-89-02 VIII-2-89-05 VIII-2-98-02 VIII-2-01-04 VIII-2-01-12 VIII-2-83-22 VIII-2-83-35R VIII-2-83-35R-2 VIII-2-04-06 BC83-221 BC82-584 BC82-861 BC85-218 BC87-195 BC87-298 BC89-008 BC97-511 BC01-195 BC01-822 BC83-245 BC83-653* BC83-653** BC03-773 27 16 13 65 79 91 97 202 236 243 25 45 45 264 VIII-2-83-07 BC82-680 VIII-2-83-13 VIII-2-83-26 VIII-2-83-35R VIII-2-83-35R-2 VIII-2-01-08 VIII-2-04-10 VIII-2-83-11 VIII-2-01-05 BC81-717 BC83-221 BC83-653* BC83-653** BC01-380 BC05-680 BC80-526 BC01-206 15 27 45 45 238 268 14 236 Test Gages Calibration VIII-2-95-14 BC96-377 190 Testing Requirements VIII-2-95-07 BC95-316 177 Ultrasonic Examination angle beam VIII-2-83-37 BC83-687A field fabrication restamping ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Stresses categories design stress intensity limits thermal bending stress Stress Theory, Maximum Shear operating loads primary plus secondary principal stresses Subject Page No BC84-339 BC87-065 BC87-066 BC89-412 BC86-376 BC01-217 BC82-513 BC98-327 BC86-377 46 72 72 109 71 237 213 71 Vessel Boundary VIII-2-89-19 BC90-652 121 Volumetric Examination VIII-2-89-24 BC91-106 123 Weld Categories VIII-2-83-33 BC80-606 35 VIII-2-83-21 VIII-2-83-14 VIII-2-83-30R VIII-2-83-17 VIII-2-01-15 VIII-2-83-46 VIII-2-83-34 VIII-2-89-10 VIII-2-92-09 VIII-2-92-10 VIII-2-92-17 VIII-2-01-03 VIII-2-83-06 VIII-2-83-23 VIII-2-89-12 VIII-2-89-04 VIII-2-98-07 VIII-2-01-11 VIII-2-83-30R VIII-2-83-34 BC83-197 BC82-208 BC83-540* BC80-038C BC01-774 BC85-194 BC83-652A BC89-399 BC92-349 BC92-109 BC94-107 BC01-190 BC81-656 BC81-576 BC88-426C BC88-213 BC98-228 BC01-792 BC83-540* BC83-652 repair strength of weld metal testing tube-to-tubesheet joints weld overlay 38 (e) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS File No Ultrasonic Examination (Cont’d) VIII-2-83-41 VIII-2-86-09 VIII-2-86-10 VIII-2-89-11 flame cut flat heads VIII-2-86-08 forgings VIII-2-01-06 in lieu of radiography VIII-2-83-03 VIII-2-98-09 straight beam VIII-2-86-06 Welding buttering continuous electroslag equipment calibration nozzles packed joints procedures Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT 24 16 51 17 255 54 36 109 141 142 159 235 25 109 92 213 243 51 36 (f) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:30:44 MDT