SUMMARY OF CHANGES The 2007 Edition of this Code contains revisions in addition to the 2004 Edition with 2005 and 2006 Addenda The revisions are identified with the designation 07 in the margin and, a[.]
SUMMARY OF CHANGES The 2007 Edition of this Code contains revisions in addition to the 2004 Edition with 2005 and 2006 Addenda The revisions are identified with the designation 07 in the margin and, as described in the Foreword, become mandatory six months after the publication date of the 2007 Edition To invoke these revisions before their mandatory date, use the designation “2007 Edition” in documentation required by this Code If you choose not to invoke these revisions before their mandatory date, use the designation “2004 Edition through the 2006 Addenda” in documentation required by this Code The BC numbers listed below are explained in more detail in “List of Changes in BC Order” following this Summary of Changes Page Location Change (BC Number) KG-104.2(b) Revised in its entirety (BC05-617) Table KG-141 Revised (BC05-617) KG-311.7 Revised (BC05-1601) KG-311.12(h)(1) Added (BC05-617) KG-311.12(h)(2) Added (BC05-617) 14 KM-100 Subparagraphs (d) and (e) corrected by errata (06-1380) 17 KM-211.3(b) Revised (BC06-662) 26–28 Table KCS-1 Revised (BC03-1132, BC05-836) 29–31 Table KCS-1M Corrected by errata (BC02-115, BC05-836) 32–34 Table KHA-1 Revised (BC00-433, BC03-1132) 35–37 Table KHA-1M Revised (BC00-433, BC03-1132) 40 Notes to Tables KCS-1, KHA-1, and KNF-1 Note (21) added (BC03-1132) 42 KD-104 Added (BC05-1244) 43 KD-121(e) Reference revised (BC03-1134) KD-141 (1) In subpara (a), first sentence revised (BC06-407) (2) In subpara (c), first sentence revised (BC06-407) 44–48, 50, 51 KD-200 (1) Subparagraphs (a) through (d) added (BC03-1134) (2) Last para redesignated subpara (e) (BC03-1134) (3) Subarticles KD-220 through KD-260 redesignated (BC03-1134) (4) Subarticle KD-230 revised (BC97-161) (5) Table KD-230 revised (BC06-980) (6) Subarticle KD-241 added (BC03-1134) 53 KD-312.2 Penultimate sentence revised (BC05-1152) KD-312.3 Penultimate sentence revised (BC03-1134) KD-312.4(a) Revised (BC04-795) 54 KD-322(b) First sentence revised (BC04-795) 56 Figure KD-320.1 Notes revised (BC04-795) xxxi Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:34:09 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Changes given below are identified on the pages by a margin note, 07, placed next to the affected area ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Page Location Change (BC Number) 57 Table KD-320.1 Revised (BC04-795) 59 Figure KD-320.1M Notes revised (BC04-795) 60 Table KD-320.1M Revised (BC04-795) 62 Figure KD-320.2 Revised (BC04-795) 63 Figure KD-320.2M Revised (BC04-795) 74 KD-401(a) Revised (BC05-1071) 75 KD-412.2(a) Reference revised (BC03-1134) 77 KD-502 Definition for F1 added (BC06-1401) 80, 81 Article KD-6 Title revised (BC00-201) KD-600 (1) Revised (BC00-201) (2) Title and subparagraphs revised for Subarticle KD-601 (BC00-201) (3) Subarticles KD-620 through KD-629 revised and redesignated (BC00-201) 82 KD-640 First paragraph revised (BC03-1134) 83 KD-661 Revised (BC03-1134) 85 KD-740(b) Revised (BC03-1134) 88 KD-810(c) Revised (BC03-1134) 90 KD-823 Last sentence revised (BC03-1134) 96 Figure KD-850 Sketches (a) and (b) revised (BC05-794) 99 KD-922 Figure references updated (BC03-1134) KD-931(b)(1) Last sentence added (BC06-407) 102 Article KD-10 Added (BC05-617) 118 KD-1270(a)(2) Figure reference revised (BC03-1134) 171 Table KE-101M Revised (BC05-1067) 193 KS-132(c) Added (BC05-460) 198–202 1-100 Definitions for F, K, Pb, PD, PL, Pm, Q, Rm, Y, k, t, and revised (BC03-1134) 260, 262 H-110 Corrected by errata (BC05-1438) H-120(a) Nomenclature revised (BC03-1134) Index Updated (BC03-1134) 272–277 NOTE: Volume 57 of the Interpretations to Section VIII, Division of the ASME Boiler and Pressure Vessel Code follows the last page of this Edition xxxii Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:34:09 MDT LIST OF CHANGES IN BC ORDER BC Number Change BC97-161 BC00-201 BC00-433 This modifies the strain limits in KD-240 This revises, restructures, and renumbers paragraphs in KD-6 Revised Sections I, II, III, VIII, IX, and XII; and Code Cases 21-217-1, 2224-1, N-201-4, and N-253 to change references to SA-336 for stainless steel forgings to SA-965 SA-736, Grade A, Classes 1, 2, and Plate Materials are added to Table KCS-1 Note (21) is added to Tables KCS-1, KCS-1M, KHA-1, and KHA-1M regarding environmental cracking of ferrous materials having a measured yield strength of 135 ksi (930 MPa) or higher This revises, restructures, and renumbers paragraphs in KD-2 KD-312.4(a) and KD-322(b) are revised to include nonwelded parts made of forged carbon or low alloy steels with an ultimate tensile strength less than 90 ksi GENERAL NOTE (d) of Fig KD-320.1 and KD-320.1M deleted Tables KD-320.1 and KD-320.1M are revised by adding the number of design cycles for welded parts made of carbon or low alloy steels with ultimate tensile strengths in the range of 115 ksi to 130 ksi (793 MPa to 896 MPa) GENERAL NOTE (d) of Tables KD-320.1 and KD-320.1M are revised by adding equations for the number of design cycles for welded parts with UTSp155–130 ksi (UTSp793-896 MPa) Figures KD-320.2 and KD-320.2M are revised by adding SC VIII-2 Design Fatigue Curves for carbon and low alloy steels having an ultimate tensile strength in the range of 115 ksi to 130 ksi (793 MPa to 896 MPa) GENERAL NOTE (b) of Figs KD-320.2 and KD-320.2M are revised by adding “to interpolate for UTSp 80–115 ksi (UTSp552–793 MPa)” Table KE-101M is revised by converting fractional US to metric equivalents KD-401(a) is modified by adding “crack.” KD-312.2 is revised to clarify that salt ij is a positive number New KD-104 added Errata corrects the characters in H-110 In KG-311.7(a), the phrase “including environmental induced cracking” is deleted; and new subpara (c) is added New Article KD-10 is added to include Special Requirements for Vessels in High Pressure Hydrogen Service Figure KD-850, sketches (a) and (b), are revised by removing the arrow pointing to non-Code welds and adding additional arrows pointing to attachment to vessel welds Tables KCS-1 and KCS-1M are revised to correct the P-Nos listed for SA-336, F3V and F22; SA-387, 22; and SA-832, 21V from to 5C and 5A; 5A; and 5C, respectively KS-132 is revised to allow for the descriptions of the nameplate data to be added either to the nameplate or directly on the surface of the vessel with characters 1⁄8 in (3.2 mm) or larger Errata corrects reference to Table Y-3 to Y-1 KD-502 is revised to add definition of F1 KD-141 and KD-931 are modified to clarify leak-before-burst requirements for shrink fit layered vessels and wire wound vessels KM-211.3(b) is revised KD-240 is updated to replace the strain limit of 5% at the collapse load with a strain limit that is based on the material and triaxial (hydrostatic) stress KD-240 is renumbered as KD-230 BC02-115 BC03-1132 BC03-1134 BC04-795 BC05-1067 BC05-1071 BC05-1152 BC05-1244 BC05-1438 BC05-1601 BC05-617 BC05-794 BC05-836 BC06-1036 BC06-1380 BC06-1401 BC06-407 BC06-662 BC06-980 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS xxxiii Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:34:09 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - xxxiv Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:34:09 MDT