BS EN 3373 010 2009 ICS 49 060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Aerospace series — Terminal lugs and in line splices for crimping on electric con[.]
BRITISH STANDARD Aerospace series — Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series — Product standard ICS 49.060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 3373-010:2009 BS EN 3373-010:2009 National foreword This British Standard is the UK implementation of EN 3373-010:2009 The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009 © BSI 2009 ISBN 978 580 62406 Amendments/corrigenda issued since publication Date Comments BS EN 3373-010:2009 EN 3373-010 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM February 2009 ICS 49.060 English Version Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurss électriques - Partie 010: Cosses, rondes, étamées pour sertissage sur conducteurs en cuivre, température jusqu'à 150 °C pour bornages filetés en mériques et en pouces - Norme de produit Luft- und Raumfahrt - Kabelschuhe und Verlängerungen für das Crimpen auf elektrische Leiter - Teil 010: Kabelschuhe, ringförmig, (verzinnt) für das Crimpen auf Kupferleitungen, Betriebstemperatur bis 150 °C für metrische und zöllige Gewindebolzen - Produktnorm This European Standard was approved by CEN on 11 July 2008 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the respons bility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref No EN 3373-010:2009: E BS EN 3373-010:2009 EN 3373-010:2009 (E) Contents Page Foreword Scope Normative references Terms and definitions 4 Characteristics .4 Dimensions and mass Designation Quality assurance 8 8.1 8.2 Details of assembly tooling Crimping tools Die dimensions 9 Marking 10 Packaging .9 BS EN 3373-010:2009 EN 3373-010:2009 (E) Foreword This document (EN 3373-010:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN) After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom BS EN 3373-010:2009 EN 3373-010:2009 (E) Scope This standard defines the characteristics of tin plated copper ring shaped terminals for crimping on copper conductors They are for use on both metric and inch dimension studs at temperatures up to 150 °C maximum This standard should be used in conjunction with EN 3373-001 Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies EN 2424, Aerospace series — Marking of aerospace products EN 2591-*, Aerospace series — Elements of electrical and optical connection — Test methods EN 3373-001, Aerospace series — Terminal lugs and in-line splices for crimping on electric conductors — Part 001: Technical specification SAE-AS 20659, Terminal, lug crimp style, copper, uninsulated, ring tongue, type I, class I, for 175 °C total conductor temperature1) MIL-DTL-22520, Crimping tools, wire termination, general specification for 2) MS25441, Crimping tool, terminal, hydraulic operated, wire size thru 4/0 2) 3) MS90485, Dies, crimping tool, for use with MS20659 uninsulated wire terminals (for wire sizes through 4/0) 2) Terms and definitions For the purposes of this document, the terms and definitions given in EN 3373-001 apply Characteristics The operational range for tin plated terminal lugs shall be − 65 °C to 150 °C When split barrel construction is used the split shall be permanently sealed and shall not open as a result of crimping All surfaces shall be smooth and free from burrs and sharp edges Dimensions and mass For dimensions and mass, see Table and Figure These dimensions are based upon metric conversions of SAE-AS 20659 * All parts quoted in this standard 1) Published by: Society of Automotive Engineering (SAE), 400 Commonwealth Drive, Warrendale, PA 15096, USA 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C 20301 USA 3) Inactive for new design EN 3373-010:2009 (E) Table — Crimp lug dimensions Dimensions in millimetres Code Wire size Stud size 001 2,18 (2) 002 2,84 (4) 003 004 005 004 - 010 (22-18) A B C rad max min ∅E D max ∅F 2,92 22,61 3,17 3,50 (6) 4,83 (10) 24,59 7,92 (5/16) 30,15 6,35 4,37 3,56 1,14 1,85 0,58 7,21 ∅G ∅J max 2,49 2,29 3,10 2,90 3,86 3,61 5,16 4,90 8,58 8,20 W max 6,60 4,52 5,84 3,05 8,13 7,75 13,72 11,43 006 9,52 (3/8) 33,22 8,33 10,16 9,78 13,72 13,21 007 12,70 (1/2) 38,86 9,60 13,34 12,95 18,62 17,86 008 0,284 (4) 24,05 3,17 3,10 2,90 6,76 5,94 24,26 4,37 3,86 3,61 8,31 7,54 6,76 5,94 5,15 4,90 8,31 7,54 8,58 8,20 10,16 9,78 009 010 011 3,50 (6) 012 - 020 (16 - 14) 23,97 2,92 4,12 3,17 24,26 7,92 (5/16) 31,72 7,21 013 9,52 (3/8) 32,77 8,33 014 12,70 (1/2) 40,46 9,60 13,33 12,95 18,62 17,86 015 3,50 (6) 24,26 5,13 4,52 3,61 8,05 7,37 4,83 (10) 24,4 4,37 5,16 4,90 9,93 9,27 7,92 (5/16) 29,36 8,58 8,20 13,89 12,32 016 017 018 030 - 050 (12 - 10) 6,35 4,37 7,52 9,52 (3/8) 29,77 8,33 019 12,70 (1/2) 43,64 9,60 020 4,17 (8) 021 4,83 (10) 29,10 5,94 022 023 090 (8) 6,35 (1/4) 7,92 (5/16) 024 9,52 (3/8) 025 12,70 (1/2) 30,96 32,94 39,24 8,00 6,73 7,52 8,33 11,18 1,35 2,41 4,83 (10) 012 6,35 1,32 0,74 3,68 5,84 2,03 3,53 0,96 5,33 6,91 2,13 2,06 3,28 4,72 0,96 6,60 4,47 3,89 13,72 11,53 13,61 10,16 9,78 15,19 13,61 13,33 12,95 18,62 17,86 4,52 4,27 5,16 4,90 10,90 9,80 6,99 6,60 12,14 11,05 8,58 8,20 10,16 9,78 14,97 13,89 13,33 12,95 21,16 17,27 N/A continued EN 3373-010:2009 (E) Table — Crimp lug dimensions (continued) Code Wire size Stud size 026 4,83 (10) 027 6,35 (1/4) 028 029 140 (6) 7,92 (5/16) 9,52 (3/8) 030 12,70 (1/2) 031 4,83 (10) 032 6,35 (1/4) 033 034 220 (4) 035 7,92 (5/16) 9,52 (3/8) 12,70 (1/2) 036 4,83 (10) 037 6,35 (1/4) 038 039 340 (2) 7,92 (5/16) 11,1 (7/16) 041 12,70 (1/2) 042 6,35 (1/4) 044 045 420 (1) 7,92 (5/16) 12,70 (1/2) 047 6,35 (1/4) 049 050 051 530 (0) C rad max min 36,50 7,92 (5/16) 11,1 (7/16) 12,70 (1/2) 9,52 7,75 35,56 7,01 11,10 8,03 2,13 7,8232 7,49 9,65 2,44 8,71 12,83 48,13 2,77 50,29 3,17 9,27 12,83 14,68 3,17 11,51 12,01 9,017 10,11 1,78 10,62 16,00 7,11 13,39 11,51 51,94 9,27 11,43 9,73 14,35 7,37 1,37 11,51 46,86 5,64 1,19 11,176 43,99 5,89 1,09 8,3312 43,71 53,14 ∅F 8,33 11,18 9,52 (3/8) max 6,73 42,57 48,01 ∅E D 6,05 33,32 9,52 (3/8) 11,1 (7/16) 046 048 B 9,52 (3/8) 040 043 A 9,85 11,63 1,78 14,17 11,12 ∅G ∅J max 5,16 4,90 6,98 6,60 8,58 8,20 10,16 9,78 13,33 12,95 5,16 4,90 6,98 6,60 8,58 8,20 10,16 9,78 13,33 12,95 5,16 4,90 6,98 6,60 8,58 8,20 10,16 9,78 11,76 11,38 13,33 12,9 6,98 6,60 8,58 8,20 10,16 9,779 11,76 11,38 13,33 12,95 6,98 6,60 8,58 8,20 10,16 9,779 11,76 11,38 13,33 12,95 W max 12,78 11,68 15,82 14,73 21,16 17,78 15,95 12,19 16,46 15,37 21,16 18,03 18,06 16,97 20,42 18,80 19,89 18,80 22,51 18,80 21,67 20,57 22,94 21,84 N/A continued EN 3373-010:2009 (E) Table — Crimp lug dimensions (concluded) Code Wire size 052 9,52 (3/8) 11,1 (7/16) 056 12,70 (1/2) 057 7,92 (5/16) 059 850 (000) 9,52 (3/8) 11,1 (7/16) 060 12,70 (1/2) 061 7,92 (5/16) 062 9,52 (3/8) 063 064 B C rad max min ∅E D max 11,1 (7/16) 107 (0000) 17,78 12,01 3,28 18,14 18,24 13,03 3,56 19,91 065 (5/8) 066 (3/4) 75,06 067 (7/8) 75,46 14,66 14,15 16,38 14,22 18,64 12,70 (1/2) 12,7 2,16 17,53 69,98 13,21 1,90 15,75 62,36 3,81 2,41 19,30 19,43 ∅G max 16,26 58,93 ∅F 7,92 (5/16) 680 (00) 055 058 A 6,35 (1/4) 053 054 Stud size 15,8 ∅J 6,98 6,60 8,58 8,20 10,16 9,779 11,76 11,38 13,33 12,95 8,58 8,20 10,16 9,779 11,76 11,38 13,33 12,95 8,58 8,20 10,16 9,78 11,76 11,38 13,33 12,95 16,92 16,53 19,94 19,56 23,11 22,73 W max 24,28 23,65 26,75 25,6 29,16 27,81 32,21 30,48 N/A BS EN 3373-010:2009 EN 3373-010:2009 (E) Terminals for conductor sizes 004 - 020 Terminals for conductor sizes 030 - 107 Key Inspection hole required Figure Designation EXAMPLE Description block TERMINAL LUG Reference of this standard Item code (see Tables and 2) Quality assurance Quality assurance shall be in accordance with EN 3373-001 Identity block EN3373-010-XXX-001 BS EN 3373-010:2009 EN 3373-010:2009 (E) Table Designation of the test Details EN 2591-101 Visual examination Applicable EN 2591-102 Examination of dimensions and mass Applicable EN 2591-206 Measurement of insulation resistance Not applicable EN 2591-217 Voltage drop under specified current for terminal lugs and in-line splices Applicable EN 2591-218 Ageing of terminal lugs and in-line splices by temperature and current cycling 500 cycles - Temperature 150 °C a EN 2591-219 Voltage strength for insulated terminal lugs and in-line splices Not applicable EN 2591-301 Endurance at temperature 120 hours at 165 °C EN 2591-305 Rapid change of temperature EN 2591-101 and EN 2591-217 EN 2591-307 Salt mist Applicable EN 2591-314 Immersion at low air pressure Not applicable EN 2591-315 Fluid resistance Not applicable EN 2591-403 Sinusoidal and random vibration Applicable EN 2591-417 Tensile strength (crimped connection) Applicable EN 3373-001 Crimping at low temperature Applicable EN 3373-001 Sleeve strength Not applicable EN 3373-001 Flammability Not applicable a 8.1 The current and application time used to achieve the specified upper temperature during the first cycle is to be used for all subsequent cycles Details of assembly tooling Crimping tools Crimping tools shall conform to the requirements of MIL-DTL-22520 For conductors up to size 050 the crimping tool used shall be M22520/5-01 and, for conductor sizes from 090 and above, tools conforming to MS25441 8.2 Die dimensions For conductor sizes up to 050 the dimensions of the dies shall conform to the dimensions size 090 and larger shall conform to MS90485 Marking The item code as per Table and the manufacturer's monogram shall be embossed in the marking area shown in Figure in accordance with EN 2424 Style F 10 Packaging The packaging shall be marked with the EN designation, manufacturer's name, part number, quantity in the package, date of manufacturer and batch number BS EN 3373-010:2009 BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com You may also buy directly using a debit/credit card from the BSI Shop on the Website http://www.bsigroup.com/shop In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact Information Centre Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at http://www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at http:// www.bsigroup.com Copyright BSI Group Headquarters 389 Chiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/ standards Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright and Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com