raising standards worldwide™ NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS EN 3660 010 2010 Aerospace series — Cable outlet accessories for circul[.]
BS EN 3660-010:2010 BSI Standards Publication `,,```,,,,````-`-`,,`,,`,`,,` - Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot — Product standard NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide™ Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 3660-010:2010 The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © BSI 2010 ISBN 978 580 53265 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2010 Amendments issued since publication Text affected `,,```,,,,````-`-`,,`,,`,`,,` - Date Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM June 2010 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot - Product standard Luft- und Ramfahrt - Endgehäuse für Elektrische und optische rund- und rechtecksteckverbinder - Teil 010: Endgehäuse, Bauform K, gerade, Ausfürung, Schirmanschluß, abgedichtet, für wärmeschrumpfende Bauteile - Produktnorm Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 010: Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable - Norme de produit This European Standard was approved by CEN on 19 May 2010 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale Ref No EN 3660-010:2010: E BS EN 3660-010:2010 EN 3660-010:2010 (E) Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 4 4 Characteristics .4 5 Identification 15 6 Marking 15 7 Technical specification 15 `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Foreword This document (EN 3660-010:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN) After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Scope This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat shrinkable boots, for use under the following conditions Associated electrical connector(s) : EN 3660-002 Temperature range Class N : − 65 °C to 200 °C Class W : − 65 °C to 175 °C Class K : − 65 °C to 260 °C Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 033: Band — Product standard 1) SAE AS85049, Connector accessories, electrical general specification 2) Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply Characteristics 4.1 Dimensions and mass 4.1.1 General For interface dimensions see 4.2 * All parts quoted in this standard 1) In preparation at the date of publication of this standard 2) Published by: Society of Automotive Engineers (SAE), (www.sae.org) `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) 4.1.2 Cable outlet variant A For screen attachment with banding band, see EN 3660-033 Classes N, W and K For dimensions and mass, see Figure and Tables 1, and Key Thread A Knurl style, manufacturer’s option Three equally spaced holes for max 0,51 safety wire Manufacturer’s mark and part number NOTE On both variants, coupling nut to be captive on cable outlet body but free to rotate `,,```,,,,````-`-`,,`,,`,`,,` - Figure Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) 4.1.3 Cable outlet variant B Screen pre-terminated by manufacturer Classes N and W only For dimensions and mass, see Figure and Tables 1, and Key Thread A Manufacturer's mark and part number Knurl style, manufacturer’s option Screen/shield Screen termination device Three equally spaced holes for max 0,51 safety wire Figure `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Table — Dimensions common to both variants Dimensions in millimetres ∅B C inches − 1,14 − 0,56 08 0.500-20 UNF 15,67 10 0.625-24 UNEF 18,64 12 0.750-20 UNEF 21,79 14 0.875-20 UNEF 24,99 16 1.000-20 UNEF 28,24 18 1.063-18 UNEF 30,94 20 1.188-18 UNEF 34,16 22 1.312-18 UNEF 37,29 24 1.438-18 UNEF 40,46 28 1.750-18 UNS 50,01 A Shell size Thread — Class 2B 7,75 Table — Maximum cable entry codes and mass for variant A cable outlets Shell size Cable entry code Mass Classes N and W max 08 B 7,5 19,5 10 D 9,5 26,0 12 F 11,5 31,0 14 G — — 16 J — — 18 K 16,0 43,5 20 M 21,0 58,0 22 P 23,5 64,5 24 R 26,50 72,5 28 T — — `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Class K g max Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Table — Cable entry dimensions for variant A cable outlet Dimensions in millimetres Cable entry code D E F ± 0,51 ± 0,51 max A 4,75 7,92 11,10 B 6,35 9,52 12,70 C 7,92 11,12 14,30 D 9,52 12,70 15,88 E 11,12 14,30 17,50 F 12,70 15,88 19,05 G 14,30 17,50 20,65 H 15,88 19,05 22,23 J 17,50 20,65 23,80 K 19,05 22,23 25,40 L 20,65 23,83 27,00 M 22,23 25,40 30,16 N 23,83 27,00 31,75 P 25,40 28,58 33,34 R 28,85 31,75 36,51 S 31,75 34,93 42,84 T 34,93 38,10 46,02 Table — Maximum cable entry codes and mass for variant B cable outlet Cable entry code Mass a Classes N and W max g max 08 B 6,5 10 D 8,5 12 F 10,5 14 G 11,75 16 J 13,5 18 K 15,0 20 M 19,5 22 P 21,75 24 R 26,0 28 T 45,5 Shell size `,,```,,,,````-`-`,,`,,`,`,,` - a The mass quoted includes the device used for securing the screen to the cable outlet plus the specified length of screen and is for the maximum entry size Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Table — Cable entry dimensions for variant B cable outlet Cable entry code ∅D ∅E ± 0,51 ± 0,51 A 9,58 4,75 B 14,22 6,35 C 16,00 7,92 D 17,53 9,52 E 19,05 11,12 F 20,83 12,70 G 22,61 14,30 H 24,13 15,88 J 25,91 17,50 K 28,45 19,05 L 30,48 20,65 M 32,26 22,23 N 32,00 23,83 P 34,80 25,40 R 37,34 28,58 S 40,64 31,75 T 43,43 34,93 4.2 Interface dimensions 4.2.1 Associated connection `,,```,,,,````-`-`,,`,,`,`,,` - Dimensions in millimetres See EN 3660-002 4.2.2 Standard AS 85049 interface For classes N and W See Figure and Table Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Key 4,95 mm penetration of Z diameter measured from front of teeth N number of teeth, see Table Figure Table — For standard AS85049 interface Dimensions in millimetres W X Y Z N + 0,64 0 − 0,38 + 0,38 0 − 0,25 Number of teeth 08 12,74 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 15 12 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 24 16 25,40 21,84 20,29 18,03 30 18 26,97 23,27 22,07 20,04 33 20 30,18 26,44 25,25 23,22 36 22 33,32 29,62 28,42 26,39 39 24 36,53 32,79 31,60 29,31 42 28 44,45 38,40 37,31 35,28 54 Shell size 4.2.3 Modified AS85049 interface For class K only See Figure and Table 10 `,,```,,,,````-`-`,,`,,`,`,,` - Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Figure Table — For modified AS85049 interface Dimensions in millimetres F G H J N Ref + 0,13 + 0,18 0 − 0,25 Number of teeth 08 11,10 9,17 6,68 6,86 12 10 14,53 11,10 9,35 9,53 15 12 17,45 14,83 12,62 12,80 21 14 20,62 17,22 15,98 14,86 24 16 23,80 20,55 17,73 17,93 30 18 25,20 22,48 21,46 20,04 33 20 28,37 25,53 25,02 23,22 36 22 31,55 29,01 27,61 26,39 39 24 34,72 32,46 31,62 29,31 42 28 42,75 38,91 37,97 35,28 54 Shell size 4.3 Material and finish Material/finish Class N : Aluminium/electroless nickel plated Material/finish Class W : Aluminium/olive drab cadmium plated Material/finish Class K : Stainless steel/passivated These descriptions not apply to EN 3660-033 For screens see Table 11 `,,```,,,,````-`-`,,`,,`,`,,` - 11 Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) 4.4 Assembly torque These torque values are intended for installation use only Table Torque Nm ± 0,5 Shell size 08 10 12 4,5 14 16 18 20 9,0 22 24 28 4.5 10,0 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table Table Shell size Torque Nm ± 0,5 08 10 12 5,5 14 16 18 20 22 11,0 24 28 12,0 `,,```,,,,````-`-`,,`,,`,`,,` - 12 Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) 4.6 Tests Test details to be in accordance with Table 10, EN 3660-001 and EN 2591-100 Qualification to be in accordance with EN 3660-001 Table 10 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 101 Visual examination X — 102 Examination of dimensions and mass X See 4.1 205 Housing (shell) electrical continuity X Class F: < 2,5 mΩ; Class W: < mΩ; Class K: < 10 mΩ 212 Surface transfer impedance (from 100 MHz to GHz) a X Method Frequency Minimum attenuation Classes F, W and K MHz dB 100 90/80 200 88/75 300 88/75 400 87/71 800 85/66 000 301 Endurance at temperature X 85/65 Classes N and W only Class K, see b 305 Rapid change of temperature X TA +5 °C TB −5 °C N 200 − 65 30 W 175 − 65 30 K 260 − 65 30 Classes T1 continued `,,```,,,,````-`-`,,`,,`,`,,` - 13 Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale BS EN 3660-010:2010 EN 3660-010:2010 (E) Table (concluded) Designation of the test Not applicable Applicable see EN 3660-001 Details 306 Mould growth X See EN 3660-001, 10.2.3 307 Salt mist X Duration: Class N Class W Class K 48 h 500 h 500 h 308 Sand and dust X — 314 Immersion at low air pressure X — 315 Fluid resistance X — 316 Ozone resistance X — 317 Flammability X — 318 Fire-resistance X — 402 Shock X Method A Severity: 300 No of shocks: One in each direction in perpendicular axis Visual examination only No visual damage 403 Vibration X Method B Figure and Table Level J Duration: hours at ambient temperature Visual examination only No visual damage 406 Mechanical endurance — 30 cycles 408 Mating and unmating 420 Mechanical strength of rear accessories X 422 Locking wire hole strength X 513 Magnetic permeability X X — Phase A only Torque as specified in Table — Not fitted to a connector max values Classes N and W : 2,0 Class K : 2,5 a GHz to 10 GHz under consideration b Class K to be subjected to Test EN 2591-301 only where non-metallic components are used 14 Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale `,,```,,,,````-`-`,,`,,`,`,,` - EN 2591- BS EN 3660-010:2010 EN 3660-010:2010 (E) Identification EXAMPLE Description block Identity block CABLE OUTLET EN3660-010XXXXX Number of this standard Material/Finish For variant B, see Table 11 For variant A, see 4.3 Shell size Entry size (see Tables and 5) Screen type for variant B only (see Table 12) EXAMPLE EN3660-010C08AN Cable outlet, style K, straight, shielded, sealed, aluminium, olive drab cadmium, cable outlet variant B, shell size 08, entry code A with a pre-terminated nickel plated copper screen Table 11 — Identification code for material, finish and screen type for variant B only `,,```,,,,````-`-`,,`,,`,`,,` - Code Class a Screen code b A N T B N N C W T D W N a See 4.3 b See Table 12 Table 12 — Identification code of screen type for variant B only Code Screen and plating T Tin plated copper N Nickel plated copper Marking See Figures and and EN 3660-001 Technical specification See EN 3660-001 15 Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale `,,```,,,,````-`-`,,`,,`,`,,` - This page deliberately left blank Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale `,,```,,,,````-`-`,,`,,`,`,,` - This page deliberately left blank Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions Information on standards British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI provides a wide range of information on national, European and international standards through its Knowledge Centre BSI offers Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: plus@bsigroup.com Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website www.bsigroup.com/shop In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: knowledgecentre@bsigroup.com Various BSI electronic information services are also available which give details on all its products and services Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at www.bsigroup.com/standards Copyright Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright & Licensing Manager `,,```,,,,````-`-`,,`,,`,`,,` - Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards raising standards worldwide™ Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale