THÔNG TIN TÀI LIỆU
Product Information 137 DANIEL PRODUCTS CO.: DISPERSE-AYD Multi-Functional Pigment Dispersing Agents: DISPERSE-AYDS are blends of several surface active materials working synergistically to wet and deflocculate pigments and to stabilize the finished dispersions Each DISPERSE-AYD, properly used, will much more than any single surfactant DISPERSE-AYDS provide: Rapid pigment wetting Good flow at high pigment loading Increased mill output Maximum tinting strength development Full chroma development Minimum floating, flooding and rub-up Compatibility in a broad range f coatings Long term viscosity stability Optimum initial gloss with stab lity on aging 10 Freedom from hard settling DISPERSE-AYD W-22 and W-28: For Water-Thinned Coatings Both DISPERSE-AYD W-22 and W-28 are effective with a wide range of pigments Composition: Blends of anionic and non-ionic surface active materials DISPERSE-AYD W-22: Active Ingredients: 35.0% Viscosity (Gardner-Holdt): R to V Color (Gardner): to Wt./Gal (Sp Gr.): 8.8 Lbs (1.06) pH of 10% Aqueous Solution: 8.5-9.5 Surface Tension of 0.1% Solution: 43.3 dynesfcm Surface Tension of 1.0% Solution: 36.4 dynesfcm Flash Point: 225Fj107C DISPERSE-AYD W-28: Active Ingredients: 55.0% Viscosity (Gardner-Holdt): G to J Color (Gardner): to Wt./Gal (Sp Gr.): 8.7 Lbs (1.04) pH of 10% Aqueous Solution: 10.5-1 1.5 Surface Tension of 0.1% Solution: 39.6 dynesfcm Surface Tension of 1.0% Solution: 35.0 dynesfcm Flash Point: 225F/107C 138 Industrial Sugacianis DANIEL PRODUCTS CO.: DISPERSE-AYD Multi-Functional Pigment Dispersing Agents (Continued): DISPERSE-AYD 15: For high performance solvent-thinned coatings DISPERSE-AYD is a pigment dispersing vehicle that can be used without modification to prepare concentrated dispersions of most pigments for use in a wide range of high performance, solvent-thinned coatings Composition: Modified thermoplastic acrylic in propylene glycol monomethyl ether acetate (PM Acetate) Suggested Use: DISPERSE-AYD should be used to make highly concentrated pigment dispersions which can either be let down directly into finished coatings or converted into stable, nonflaking tinting pastes for both in-plant and machine tinting Specifications: Solids: 65.0% Solvent: PM Acetate Flash Point: O8F/43C Wt./Gal (Sp Gr.): 8.7 Lbs ( ) Viscosity (Gardner-Holdt): V-2 Color (Gardner): Max DISPERSE-AYD 9100 Powdered Dispersing Resin: For high performance non-aqueous coatings DISPERSE-AYD 0 is a solvent-free pigment dispersing resin in powder form It is soluble in a wide variety of solvents, monomers and reactive diluents and compatible with most solvent-thinned and many solvent-free coating vehicles It can be used as the sole dispersing resin to prepare highly concentrated dispersions of both organic and inorganic pigments It also will function as an additive to improve the dispersing characteristics of many vehicles with poor pigment wetting properties Composition: Modified thermoplastic acrylic Use as a Dispersing Additive: DISPERSE-AYD 0 can significantly improve the pigment dispersing properties of formulas based on nitrocellulose, high solids polyester, vinyls, epoxies and other poor wetting vehicles Use as a Dispersing Resin: DISPERSE-AYD 0 should first be put into solution at approximately % solids The solution should then be used to make highly concentrated pigment dispersions which can either be let down directly into finished coatings or converted into stable, non-flaking tinting pastes for both in-plant and machine tinting Specifications: Solids: 100% Form: Powder Color: White to Pale Yellow Wt./Gal (Sp.Gr.): 8.85 lbs ( ) Acid Number: (2 Product Information 139 DANIEL PRODUCTS CO.: DISPERSE-AYD Multi-Functional Pigment Dispersing Agents (Continued): DISPERSE-AYD Broad Spectrum Dispersing Agent: For solvent-thinned coatings DISPERSE-AYD is a versatile wetting, dispersing and stabilizing aid for solvent thinned coatings It efficiently wets and deflocculates most organic and inorganic pigments and then stabilizes the finished dispersion to prevent both hard setting and reagglomeration Composition: A proprietary reaction product of high molecular weight surface active materials with a long oil alkyd The alkyd portion acts as an auxiliary film former to minimize or prevent the detrimental side effects often associated with surfactants Suggested Use: Effective at all usage levels Pigment dispersions in many of the vehicles listed above can be substantially improved by replacing vehicle solids with 5% to 10% DISPERSE-AYD Specifications: Solids: 75.0% Solvent: Mineral Spirits (65 Surface tension at 25C: (dyneslcm): 1.0% in H20: 23.0+-1 TEGOPREN 58 51 : Polyether-polymethylsiloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 75/25 Viscosity at 25C (centistokes): 450+-120 Specific gravity at 25C: 1.05+-0.01 Cloud point in % water solution (C): Active substance: 100% Liquid, colorless Refractive index 20C: 1.450+-0.005 Flash point C (closed cup): >65 Surface tension at 25C: (dyneslcm) 1.0% in H20: approx 30 TEGOPREN 5852: Polyether-polymethylsiloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 20180 Viscosity at 25C (centistokes): 300+-80 Specific gravity at 25C: 1.01+-0.01 Cloud point in % water solution (C): 65 Surface tension at 25C (dynes/cm) 1.0% in H20: 28+-1 TEGOPREN 5863: Polyether-polymethylsiloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 40160 Viscosity at 25C (centistokes): 2,700+-700 Specific gravity at 25C: 1.04+-0.01 Cloud point in % water solution (C): 42+-2 Active substance: 100% Liquid, pale yellow Refractive index 20C: 1.450+-0.005 Flash point C (closed cup): >65 Surface tension at 25C: (dynes/cm) % in H20: 30.5+-1 TEGOPREN 5873: Polyether-polymethylsiloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 35/65 Viscosity at 25C (centistokes): 450+-100 Specific gravity at 25C: 1.03+-0.01 Cloud point in % water solution (C): 30 Active substance: 100% Liquid, colorless Refractive index 20C: 1.449+-0.005 Flash point C (closed cup): >65 Surface tension at 25C: (dynes/cm) % in H20: 27+-1 TEGOPREN 5878: Polyether-polymethylsiloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 0 / Viscosity at 25C (centistokes): approx 25 Specific gravity at 20C: 1.01+-0.01 Cloud point in % water solution (C): l o Surface tension at 25C: [dynes/cm) 1.00% in H20: 20 Product Information GOLDSCHIIIJX CBEnICAL CORP.: (Continued): TEGOPREN Silicone Surfactants TEGOPREN 8 : Polysiloxane-polyether-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 77/23 Viscosity at 25C (centistokes): 10,000+-2,000 Specific gravity at 25C: 1.04+-0.01 Cloud point in % water solution ( C ) : 71+-3 Active substance: 0 % Liquid, light yellow Refractive index (25C): 1.440+-0.005 Flash point C (closed cup): >65 TEGOPREN 8 - : Polysiloxane-polyether-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EO/PO in polyether: 77/23 Viscosity at 25C (centistokes): 95+- Specific gravity at 25C: 1.024+-0.01 Cloud point in 1% water solution (C) 71 +-3 Active substance: 35% Liquid, light yellow Refractive index 20C: 1.375+-0.005 Flash point C (closed cup): Not applicable TEGOPREN 0 : Alkyl-polymethylsiloxane copolymer Type: Organophilic Chemical and Physical Properties: Viscosity at 35C (centistokes): 20-30 Specific gravity at 20C: 0.85+-0.01 Active substance: 100% Waxy liquid, colorless Refractive index 20C: 1.442 Flash point C (closed cup): >52 209 210 Industrial Surfactants GOLDSCHnIDT CJiEMICAL CORP.: (Continued): TEGOPREN Silicone Surfactants TEGOPREN 6801 : Alkyl-polymethylsiloxane copolymer Type: Organophilic Chemical and Physical Properties: Viscosity at 25C (centistokes): - Specific gravity at 20C: 0.86+-0.01 Active substance: 0 % Liquid, colorless Refractive index 20C: Flash point C (closed cup): > Pour point ( C ) : - Surface tension at 25C: (dynes/cm) % in paraffin oil: 31 TEGOPREN 681 4: Alkyl-polymethylsiloxane copolymer Type: Organophilic Chemical and Physical Properties: Viscosity at 25C (centstokes): + - 0 Density at 25C (g/ml): 0.90+-0.02 Active substance: 0 % Clear liquid/slightly yellow Pourpoint ( C ) : ( Flashpoint C (closed cup): , 0 TEGOPREN 681 5: Acetoxypropyl-polymethyl-siloxane-copolymer Type: Organophilic Chemical and Physical Properties: Viscosity at 25C (centistokes): l o o + - Specific gravity at 25C: Active Substance: 0 % Liquid, colorless to slightly yellow, clear Refractive index 25C: + - 0 Flash point C (closed cup): > Surface tension at 25C: (dynes/cm) % in DOP: TEGOPREN 6846: Alkyl-polymethylsiloxane copolymer Type: Organophilic Chemical and Physical Properties: Viscosity at 70C (centistokes): approx 250 Density at 70C (g/ml): approx 0.84 Active content: 0 % Waxy, white Flash point C (closed cup): > 0 Melting point C (closed cup): approx 60 Product Information GOLDSCHMIDT CIIEMICAL CORP.: (Continued): TEGOPREN Silicone Surfactants TEGOPREN 6920: Diquaternary Polydimethylsiloxanes Type: Cationic Chemical and Physical Properties: Viscosity at 25C (centistokes): 350+-100 Surface tension at 25C (dyneslcm): 31.5+-2 Specific gravity at 25C: 1.01+-0.01 Active matter: 50% Liquid, amber Flash point C (closed cup): >65 pH-value at 25C (30% in H20): 7.2+-1 Refractive index (25C): 1.443+-0.005 Solvent: Propylene glycol Weight % quat Nitrogen: 0.8 TEGOPREN 6922: Diquaternary Polydimethylsiloxanes Type; Cationic Chemica, and Physical Properties: Viscosity at 25C (centistokes): 750+-200 Surface tension at 25C (dyneslcm): 44+-2 Specific gravity at 25C: 1.00+-0.01 Active matter: 50% Liquid, amber Flash point C (closed cup): >65 pH-value at 25C (30% in H20): 7.2+-1 Refractive index (25C): 1.429+-0.005 Solvent: Propylene glycol Weight % quat Nitrogen: TEGOPREN 6950: Organobetain-polymethyl-siloxane-copolymer Ionic Nature: Amphoteric Chemical and Physical Properties: Viscosity at 25C (centistokes): 45-100 Specific gravity at 20C: 1.08+-0.01 Active substance: 30% Liquid, clear yellow NaCl content ( % I : 3.3-3.8 pH-value (30% in water at 25C): 5-7 Flash point C (closed cup): >lo0 Surface tension at 25C: (dynes/cm): 1.00% in H20: 25 Solvent: Propylene glycol/water (ratio 60:40) TEGOPREN 0 : Polyether-alkyl-polymethyl-siloxane-copolymer Ionic Nature: Non-ionic Chemical and Physical Properties: Weight % EOIPO in polyether: 60140 Viscosity at 25C (centistokes): 900+-200 Specific gravity at 20C: 0.93+-0.01 Active substance: 100% Liquid, colorless to pale yellow Refractive index 20C: 1.438+-0.002 Flash point C (closed cup): >lo0 211 212 Industrial Surfuctarits W.R GRACE & C0.-CONN.: IIAMPOSYL Acids: HAMPSHIRE HAMPOSYL Surfactants: HAMPOSYL L: Lauroyl Sarcosine Active Ingredient: 94% Free Fatty Acid: 6% max Color, Gardner: max Appearance @ 25C: White waxy solid Specific Gravity @ 25C: -97 99 Softening Point: 34-37C Molecular Weight of Active Ingredient: 270 HAMPOSYL C: Cocoyl Sarcosine Active Ingredient: 94% Free Fatty Acid: 6% max Color, Gardner: max Appearance @ 25C: Pale yellow liquid Specific Gravity @ 25C: 97 99 Softening Point: 18-22C Molecular Weight of Active Ingredient: 280 HAMPOSYL M: Myristoyl Sarcosine Active Ingredient: 94% Free Fatty Acid: 6% max Color, Gardner: max Appearance @ 25C: White waxy solid Specific Gravity @ 25C: 97 99 Softening Point: 48-53C Molecular Wt of Active Ingredient: 298 HAMPOSYL 0: Oleoyl Sarcosine Active Ingredient: 94% Free Fatty Acid: 6% max Color, Gardner: max Appearance @ 25C: Yellow liquid Specific Gravity @ 25C: 95-.97 Molecular Wt of Active Ingredient: 349 HAMPOSYL S: Stearoyl Sarcosine Active Ingredient: 94% Free Fatty Acid: 6% max Color, Gardner: max Appearance @ 25C: White waxy solid Specific Gravity @ 25C: 96-.98 Softening Point: 53-58C Molecular Wt of Active Ingredient: 338 Product Information W.R GRACE & C0.-CONN.: HAMWSYL Salts: HAMPSHIRE HAWPOSYL Surfactants: HAMPOSYL L-30: Sodium Lauroyl Sarcosinate Solution Active Ingredient: 30%+-1% pH, 10% solution: 7.5-8.5 Sodium Soap: 2% max Color, APHA, as is: 60 max Appearance: colorless liquid Specific Gravity @ 25C: 1.02-1.03 Freezing Point: -lC Molecular Wt of Active Ingredient: 292 HAMPOSYL L-95: Sodium Lauroyl Sarcosinate Powder Active Ingredient: 94% pH, 10% solution: 7.5-8.5 Sodium Soap: 4% max Color, APHA, as is: 80 max Appearance: Dry white powder Specific Gravity @ 25C: 25 lbs./cu.ft Molecular Wt of Active Ingredient: 292 HAMPOSYL C-30: Sodium Cocoyl Sarcosinate Solution Active Ingredient: 30%+-1% pH, 10% solution: 7.5-8.5 Sodium Soap: 2% max Color, APHA, as is: 100 max (30% sol.) Appearance: Colorless to very pale yellow liquid Specific Gravity @ 25C: 1.02-1.03 Freezing Point: -lC Molecular Wt of Active Ingredient: 301 HAMPOSYL M-30: Sodium Myristoyl Sarcosinate Solution Active Ingredient: 30%+-1% pH, 10% solution: 7.5-8.5 Sodium Soap: 2% max Color, APHA, as is: 100 max Appearance: Colorless liquid Specific Gravity @ 25C: 1.02-1.03 Freezing Point: -lC Molecular Wt of Active Ingredient: 320 213
Ngày đăng: 06/04/2023, 20:24
Xem thêm: