INTERNATIONAL STANDARD ISO 788641993 TECHNICAL CORRIGENDUM 1 Published 1995 11 01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJYHAPOnHAR OPI AHM3ALW l IO CTAHJIAPTL43ALWl ORGANISATION INTERNAT[.]
INTERNATIONAL STANDARD ISO 788641993 TECHNICAL CORRIGENDUM Published INTERNATIONAL ORGANIZATION FOR STANDARDIZATION Sterile hypodermic l MEXJYHAPOnHAR 1995-11-01 OPI-AHM3ALW l-IO CTAHJIAPTL43ALWl ORGANISATION INTERNATIONALE DE NORMALISATION syringes for Single use - Part 1: Syringes for manual use TECHNICAL CORRIGENDUM Seringues hypodermiques steriles, non r&tilisables Partie 7: Seringues pour utilisation - manuelle RECTIFICATIF TECHNIQUE Technical corrigendum to International Standard ISO 7886-1:1993 was prepared by Technical Committee devices for injections, Su bcommittee SC 1, Syringes, needles and intravascular catheters for Single use ISO/rC 84, Medical Page Delete the existing figure and replace with the following new figure (in the 1993 edition, arrow 5, indicating the fiducial line, Points to the end of the Piston nearest to the finger grips, whereas it should indicate the line on the Piston nearest to the Syringe nozzle, as in the new figure 1) Ics 11.04020 Descriptors: labelling medical equipment, ISO1995 Printed in Switzerland Ref No ISO 7886-1:1993/Cor.l:1995(E) sterile equipment, disposable equipment, syringes, specifications, dimensions, tests, packaging, ISO 7886~1:1993/Cor.l:1995(E) / n/ 10 / LIs\ 11 10 I k - +ml / $-;iL -l / I / / Zero graduation line Graduation lines Nominal capacity graduation line Total graduated capacity line Schematic 12 10 11 12 13 14 Fiducial line Finger grips Nozzle cap Nozzle lumen Nozzle NOTE - The drawing is intended to be illustrative of components construction and may or may not incorporate more than one Seal Figure - \ of a Syringe The piston/plunger representation of hypodermic Barrel Piston Seal Plunger Push-button assembly may or may not be of integral Syringe for Single use