Revit modeling advice 2 0 For Measurement Estimating Purposes

Revit modeling advice 2 0 For Measurement Estimating Purposes Revit modeling advice 2 0 For Measurement Estimating Purposes Revit modeling advice 2 0 For Measurement Estimating Purposes Revit modeling advice 2 0 For Measurement Estimating Purposes Revit modeling advice 2 0 For Measurement Estimating Purposes

Revit Modeling Advice 2.0 For Measurement & Estimating Purposes General Principle Supported Version  Support importing RVT files from Revit 2013~2020  Supported Format: *.rvt Floor Structure  All levels in RVT will RVT be imported in TIO no matter the corresponding floor plane is generated or not * The levels in both black and blue will be imported into TIO TIO Floor Structure  If a project is consisting RVT RVT of multiple RVT files, or a RVT file is linked with multiple RVT files, the RVT files of the same project must be consistent in terms of number of floors, floor height and bottom elevation of each floor Project Project Project Unit  Both metric and TIO imperial measurement units in RVT could be resolved accordingly in TIO RVT Base Point Elevation  It is recommended to enter for the value for Elev in Revit If not, the display of floor height will be influenced after import For example, enter 112mm for Elev, and then the actual bottom elevation will be the elevation displayed + 0.112 If the elevation displayed is 101.912, the actual bottom elevation will be 101.912+0.112 RVT Naming  In RVT, the entities are named in the format of Family: Type After importing into TIO, the name format is Family: Type by default  If there are requirements special for naming, you can enter name values in Mark When importing them into TIO, you can use Match Attributes to get the name values RVT TIO Concrete Grade RVT  In RVT, if you want to mark concrete grade values, It is recommended to enter them in Material or Type Name The format is C+number, for example, C15 Naming Rule for Attributes  In RVT, it it suggested that the name of the same attribute should be used only once They are not case-sensitive For example, Description and DESCRTION are taken as the same attribute It is not suggested to use them as two different attributes Raft Foundation  In RVT, if you think the element should be classified as Raft Foundation, please use Slab in the Foundation group on the Structure tab RVT TIO Material Item Element Raft Foundation Condition (Given ) Name elements with material of RVT Remarks No matter what material it is used in —— —— Revit, it will be imported as In-situ Concrete Raft Foundation in TIO Pad Foundation Pad Foundation  In RVT, if you think the element should be classified as Pad Foundation, please use Isolated in the Foundation group on the Structure tab, and its value for Type Name should contain Pad Foundation RVT TIO Material Item Element Condition (Given ) Name elements with material of RVT Remarks Manage to name elements by Precast Pad Foundation Precast choosing these materials in Revit In this way, they could be matched with materials in TIO Brick Pad Foundation 10 Brick automatically after import If you choose other materials Pad Foundation rather than these materials, in TIO, they will be matched with the default material used when Rubble Pad Foundation Rubble creating elements, that it, In-situ Concrete Pad Foundation You need to check and modify them in Element Settings Room Room  The RVT room will be matched with Room in TIO after import RVT TIO Room  In RVT, if you want to lay out Room, please fill in Name, Ceiling Finish, Wall Finish and Floor Finish for room correctly RVT Opening Opening RVT  In RVT, when drawing openings, avoid to detach them from the main entity  Unless specially required, avoid to draw openings with Vertical Window RVT  The window should be attached to the wall If it is attached to other element type, such as the floors, the information will be lost after being imported into TAS TIO Window  The window should be attached to the parent wall If the window is drawn without parent in Revit, after being imported into TAS, the window entities will also be lost Component Component  Avoid to draw elements with Component specially required, If not group elements and draw them altogether RVT ...General Principle Supported Version  Support importing RVT files from Revit 20 13 ~ 20 20  Supported Format: *.rvt Floor Structure  All levels in RVT will RVT be imported in TIO no matter... import For example, enter 112mm for Elev, and then the actual bottom elevation will be the elevation displayed + 0. 1 12 If the elevation displayed is 101 .9 12, the actual bottom elevation will be 101 .9 12+ 0. 1 12. .. 101 .9 12+ 0. 1 12 RVT Naming  In RVT, the entities are named in the format of Family: Type After importing into TIO, the name format is Family: Type by default  If there are requirements special for