Break Internet Bandwidth Limits Higher Speed Extreme Reliability Reduced Cost © 2012 Peplink © Peplink All Rights Reserved Unauthorized Reproduction Prohibited Presentation Agenda • Peplink Balance • Pepwave MAX • Features • Concepts • Scenario • WAN Settings • LAN Settings • Drop-in Mode • Drop-in VS NAT • Complete VPN Solution ã SpeedFusion VPN ã PPTP Server â 2012 Peplink Presentation Agenda • Outbound Policy • Inbound Access • Inbound Load Balancing • DNS Settings • One-to-One NAT Mapping • NAT Pool • QoS • WLAN Controller • Hardware High Availability • LAN Bypass • Bandwidth Usage Monitoring • Additional Capabilities â 2012 Peplink Presentation Agenda ã Contact Support • Diagnostic Report • Additional Support Information • Question and Answer ã Contact Us â 2012 Peplink Peplink Balance â 2012 Peplink Balance Series Specifications Model Balance 20/30 Balance 210/310 Balance 380/580 Balance 710/1350 Target User Power User/ Home Office Small Business Mid-Size Business Large Enterprise 1-25 25-50 50-500 300-1000 500-2000+ 1000-5000+ Throughput 100Mbps 100Mbps 200Mbps 400Mbps 800Mbps 1500Mbps WAN Ports 2/3 2/3 3/5 7/13 1 1 Add-on Yes Yes Yes VPN Throughput N/A 30Mbps 60Mbps 80Mbps 160Mbps 350Mbps AP Controller Support No No 50 100 250 500 Recommended Users USB WAN Support Peplink VPN Bonding © 2012 Peplink Pepwave MAX © 2012 Peplink MAX Series Specifications © 2012 Peplink Features • Internet Link Load Balancing & Failover ã Session based for Inbound and Outbound â 2012 Peplink Proprietary and Confidential Features • WAN Bonding • Packet based load balancing • Single TCP/IP session can utilize all WAN links ã Using SpeedFusion VPN proprietary technology â 2012 Peplink Proprietary and Confidential Hardware High Availability • In the event of Active unit fails: • The Stand-by unit becomes Active • New Active unit re-establishes Internet connections • Outage is minimized â 2012 Peplink Hardware High Availability ã Each unit has their own LAN IP address and use a same Virtual IP • For non-drop-in mode, the VIP will be the default gateway of LAN hosts • For Drop-in mode, WAN1’s default gateway will be the default gateway of LAN hosts 192.168.1.3 Configuring HA for Slave unit 192.168.1.2 © 2012 Peplink LAN Bypass • Available in Peplink Balance 580/710/1350 • LAN Bypass is a fault-tolerance feature that protects you in the event of power outage • When used with Drop-in Mode, such failure would be completely transparent to the network • In the following example, WAN1 and LAN1 ports are bridged together when the power runs out © 2012 Peplink Bandwidth Usage Monitoring • Show the bandwidth usage statistics • Three periods of statistics: Real-Time, Daily, Monthly • Usage will not be shown at the time when device had been switched OFF • Real-Time • Click Show Details to view the usage of different WAN or type of traffic â 2012 Peplink Bandwidth Usage Monitoring ã Daily ã Detailed usage statistics of ALL WAN with IP Address can be shown by clicking corresponding Date • A selected WAN usage can be shown in billing cycle when the bandwidth allowance monitor of that WAN is enabled © 2012 Peplink Bandwidth Usage Monitoring • Monthly • Detailed usage statistics of ALL WAN with IP Address can be shown by clicking the first two Month rows • A selected WAN usage can be shown in billing cycle when the bandwidth allowance monitor of that WAN is enabled © 2012 Peplink Additional Capabilities • E-mail notification: • Send email to user for any WAN up/down event, Site-to-Site VPN, HA status © 2012 Peplink Additional Capabilities • Rule-based stateful Firewall: • Support for an unlimited number of rules • Drag and drop user interface â 2012 Peplink Additional Capabilities ã Reporting Service â 2012 Peplink Contact Support • Detail description of the issue • Network Diagram with detail IP address scheme • Troubleshooting steps that you performed • Diagnostic Report of related units • Remote Assistance of related units • Send email to priority.support@peplink.com â 2012 Peplink Proprietary and Confidential Diagnostic Report ã Obtain Diagnostic Report via “Status > Device” © 2012 Peplink Proprietary and Confidential Additional Support Information • Support Information Page contains • LAN/WAN Ethernet details • Remote Assistance • Network Capture • Realtime information of WAN Health Check • To access Support Information page, from the Brower URL, change the link ã http:///cgi-bin/MANGA/index.cgi â 2012 Peplink Proprietary and Confidential Additional Support Information • Support Information Page contains • LAN/WAN Ethernet details • Remote Assistance • Network Capture • Realtime information of WAN Health Check • To access Support Information page, from the Brower URL, change the link • http:///cgi-bin/MANGA/support.cgi © 2012 Peplink Proprietary and Confidential Questions and Answers © 2012 Peplink Contact Us • Peplink United States Office • 800 West El Camino Real Mountain View, CA 94040 United States Tel: Fax: • Tel: +27 12 665 5829 Peplink Hong Kong Office Tel: Fax: +852 2990 7600 +852 3007 0588 Peplink Italy Office Via Sismondi 50/3 20133 Milan Italy Tel: • Unit 24, Cambridge Office Park, Bauhinia Street, Highveld, Centurion, South Africa +1 (866) 463 0129 +1 (866) 625 4664 17/F, Park Building 476 Castle Peak Road Cheung Sha Wan Hong Kong • Peplink South Africa Office +39 02 8986 6852 Peplink Saudi Arabia Office Queen’s Tower 24th Floor, Jeddah Saudi Arabia Tel: © 2012 Peplink +966 504336952 • Sales: http://www.peplink.com/contact/sales/ • Support: http://www.peplink.com/contact/support/ ... Capabilities â 2012 Peplink Presentation Agenda ã Contact Support ã Diagnostic Report • Additional Support Information • Question and Answer • Contact Us © 2012 Peplink Peplink Balance © 2012 Peplink Balance... 50 100 250 500 Recommended Users USB WAN Support Peplink VPN Bonding © 2012 Peplink Pepwave MAX © 2012 Peplink MAX Series Specifications © 2012 Peplink Features • Internet Link Load Balancing... Mbps + Mbps + Mbps © 2012 Peplink Scenario • Failover (One WAN Down): • A Peplink Balance unit • Three Mbps Internet Links • One link down: ISP A Local Area Network • Peplink Balance re-directs