Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 663 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
663
Dung lượng
28,64 MB
Nội dung
Karl Heinz Buchel
Hans-Heinrich Moretto
Peter Woditsch
Industrial
Inorganic Chemistry
Industrial
Karl Heinz Buchel
Hans-Heinrich Moretto
Peter Wodi
t
sc
h
Second, Completely
Revised Edition
inorganic
Translated by
C
hemi
s
trv
David R. Terrell
BWILEY-VCH
Weinheim
-
New York
Chichester
-
Brisbane
Singapore
-
Toronto
Professor Dr. Dr.
h.
c. mult. Karl Heinz Buchel
Member of the Board of Directors
of
Bayer
AG
D-5 I368 Leverkuaen
Professor Hans-Heinrich Moretto
Bayer
AG
Central Research
D-5 1368 Leverkusen
Professor Dr. Peter Woditsch
Bayer
AG
CH-BS
D-47829 Krefeld
This book was carefully produced. Nevertheless, authors, translator and publisher do not warrant the information
contained therein to be free of errors. Readers are advised to keep in mind that statements, data, illustrations, procedu-
ral details or other items may inadvertently be inaccurate.
First Edition 1989
Second, Completely Revised Edition
2000
First Reprint 2003
Library
of
Congress Card
No.:
Applied for.
British Library Cataloguing-in-Publication Data:
A
catalogue record for this book is available from the Britiah Library.
Deutsche Bibliothek Cataloguing-in-Publication Data:
A
catalogue record for this publication is available from Die Deutsche Bibliothek
0
WILEY-VCH Verlag CmbH. D-69469 Weinheim (Federal Republic of Germany), 2000
Printed on acid-free and chlorine-free paper.
All
rights reserved (including those of translation in other languages).
No
part
of
this book may be reproduced
in
any
form
-
by fotoprinting, microfilm, or any other means
-
nor transmitted or translated into a machine language without
written permission from :he publishers. Registered names, trademarks, etc. used in this book, even when not hpecifically
marked as such, are not to be considered unprotected by law.
Composition: Graphik
&
Text Studio, D-93 I64 Laaber-Waldetzenberg
Printing: Straws Offsetdruck, D-69509 Morlenbach
Bookbinding: Buchbinderei
J.
Schlffer, D-67269 Griinstadt
Printed in the Federal Republic of Germany
Preface to the Second English Edition
In the more than 10 years, since the publication of the first edition of the book “Industrial Inorganic
Chemistry”, the structure of inorganicindustrialchemistry has not changed fundamentally.
In most sectors the “state of the art” has been expanded and refined. This
is
addressed together
with the updating
of
the economic data in this new edition.
The pressure for change in the meantime was due in particular to globalization of the World
economy and the resulting pressure for cost reduction through new and optimalized processes and
to
an expanding knowledge
of
ecological requirements e.g. energy saving and new production and
development principles such
as
quality assurance and responsible care.
To the extent that it is discernible in the products and processes, appropriate aspects have been
incorporated in the revision, for example see membrane technology in the chloralkali and
hydrochloric acid electrolysis.
Expansion of the sections on the products of silicon chemistry, silanes, heavy duty ceramics and
photovoltaics reflects their increased importance.
Chapter
6
over the Nuclear Fuel Cycle has been updated
as
regards technical developments and
in
particular as regards its societal and political context.
In inorganicchemistry there have been important changes particularly in inorganic materials
such as new composite materials and so-called nano-materials, in the area of photovoltaics and in
catalysis. Since these have not yet been widely used industrially, they have not been covered
in
the
second edition of this book.
In the revision of this book numerous colleagues have assisted
us,
we particularly wish to thank:
Dr.
J.
Becker, Uranerzbergbau GmbH,
Dr. H D. Block, Bayer AG
Frau G. Blum, Bayer AG
Dr.
U.
Brekau, Bayer AG
Dip1 Ing. A. Bulan, Bayer AG
Dr. G. Buxbaum, Bayer AG
Dr. L. Puppe, Bayer AG
Dr.
F.
Gestermann, Bayer AG
Dr. Ch. Holzner, Bayer AG
Wesseling
Dr.
H.
Lange, Bayer AG
Dr.
J.
Liicke, CFI GmbH
&
Co.
KG, Rodenthal
Dr. R. Miinstedt, Bayer AG
Dr.
W.
Ohlendorf, Bayer AG
Dr.
K.
Tagder, Wirtschaftsverband
Frau Dr.
H.
Volker, Gottingen
Dr. G. Wagner, Bayer AG
Frau
M.
Wiegand, Bayer AG
Dr.
K.
Wussow, Bayer AG
Kernbrennstoff-Kreslauf e.V., Bonn
We also thank Wiley-VCH for their patience and understanding in the production of the new
edition and its excellent presentation.
Leverkusen. Autumn
1999
The Authors
VI
Preface
Preface to the First English Edition
“Industrial Inorganic Chemistry” was first published in German
in
1984. The book was well
received by students and teachers alike, leading to the publication of a second German edition
in
1986. The publishers, VCH Verlagsgesellschaft, were convinced that a wide circle of readers
would welcome the appearance of our book
in
the English language, and their encouragement has
led to the preparation of the present up-dated and revised edition in English.
The basic structure
of
the German Edition has been retained. Changes in the industrial importance
of some compounds and processes since the appearance of the German edition have been taken
into account and data relating to the
US
market have been emphasised. Thus the chapter on
potassium permanganate has been considerably abridged and that on the membrane process for the
manufacture of chlorine and sodium hydroxide expanded.
We are indebted to Dr Podesta and Dr Heine from Bayer AG for their assistance
in
the revision of
the German edition in addition to the institutions and colleagues mentioned
in
the preface to the
German edition.
The book was translated by Dr D.
R.
Terrell from Agfa-Gevaert
NV,
to whom we are particularly
grateful for the patience and care he devoted
to
this difficult task. We also wish to acknowledge the
contribution
of
VCH Verlagsgesellschaft in producing this edition.
Leverkusen. Autumn 1988
K.
H.
Buchel
Preface
VII
Preface to the First German Edition
The book “Industrielle Anorganische Chemie” will fill
a
long term need, which has become even
more apparent since the appearance of “Industrielle Organische Chemie” by Wessermel and Arpe*.
Although there are comprehensive chapters on this branch of chemistry in
a
number of
encyclopedias and handbooks, a single volume text is lacking that describes concisely the current
state of industrialinorganic chemistry.
The authors have been made aware of this need in discussions with students, young chemists,
colleagues in neighboring fields, teachers
and
university lecturers and willingly accepted the
suggestion of the publishers to write this text. Changes
in
the supply of raw materials and their
markets and economic and ecological requirements are responsible for the continual reshaping of
the inorganic chemical industry. As
a
result the treatment of industrial processes in the available
textbooks seldom keeps pace with these developments.
The inorganic chemical industry is an important branch of industry and its structure is particularly
diverse: including
a
large number of finished products (mineral fertilizers, construction materials,
glass, enamels and pigments to name but
a
few) and basic products for the organic chemical
industry such
as
mineral acids, alkalis, oxidizing agents and halogens. Modern developments in
other branches
of
industry, such
as
chips for microelectronics, video cassettes and optical fibers
have only been possible due to the continuous development of the inorganic chemical industry.
This book emphasises the manufacturing processes, economic importance and applications of
products. In the sections on production the pros and cons are considered in the context of the raw
material situation, economic and ecological considerations and energy consumption, the different
situations in different countries also being taken into account. Processes which are no longer
operated are at most briefly mentioned. The properties
of
the products are only considered to the
extent that they are relevant for production or applications.
It was necessary to restrict the material to avoid overextending the brief. Metallurgical processes
have not been included, except for the manufacture
of
“chemical” metals (e.g. alkali metals) which
is briefly described. Several borderline areas with organic chemistry are considered (e.g. organo-
phosphorus, -silicon and -fluoro products), others are deliberately excluded. A whole chapter is
devoted to the nuclear fuel cycle, since it involves
so
much industrial scale inorganicchemistry and
is currently
so
important.
The layout follows that of its sister book “Industrielle Organische Chemie” with the
main
text
being supplemented by marginal notes. These are essentially summaries of the main text and
enable the reader to obtain a rapid grasp of the most important facts. The equations are printed on a
gray background for the same reason.
At the end of each main section
a
generally subtitled list of references is provided. This should
enable the reader to obtain more detailed information on particular matters with the minimum of
effort. In addition to references to original papers and reviews, readers are referred to the important
VIII
Prejuce
handbooks: Ullmann, Winnacker-Kuchler and Kirk-Othmer. The Chemical Economic Handbook
of the Stanford Research Institute has frequently been used for economic data.
The documentation system at Bayer AG was invaluable in gathering the important facts for this
book. Numerous colleagues have assisted us:
Outside Bayer AG our thanks are due to Prof. P. Eyerer from Stuttgart University, Dr H. Grewe
from Krupp AG, Essen, Dr Ch. Hahn from Hutschenreuther AG, Selb, Dr G. Heymer from
Hoechst AG, Knapsack Works, Dr P. Kleinschmit from Degussa, Dr G. Konig from Martin
&
Pagenstecher GmbH, Krefeld, Dr R, Kroebel from the Kernforschungszentrum Karlsruhe, Dr G.
Kuhner from Degussa
AG,
Prof.
F.
W. Locher from the Forschungsinstitut der Zementindustrie,
Dusseldorf, H. Schmidt from the
Ziegeleiforschungsinstitut,
Essen, Dr
M.
Schwarzmann and his
colleagues from BASF AG and Dr E. Wege from Sigri Elektrographit GmbH, Meitingen, for
technical advice and critical perusal of sections of the manuscript.
Inside Bayer AG our thanks are due to Dr H P. Biermann, Dr G, Franz, Dr P. Kiemle, Dr M.
Mansmann, Dr H. H. Moretto and Dr
H.
Niederprum, who with many other colleagues have helped
with the technical realization of the text. In particular we would like to thank Dr Hanna Soll, who
with her many years of experience has substantially contributed to the editing of this book.
We also thank Verlag Chemie, which has assimilated the suggestions of the authors with much
understanding and has produced this book in such an excellent form.
Leverkusen, Spring
1984
K. H. Buchel
Contents
1
Primary Inorganic Materials
1
1.1
Water
1
1.1.1 Economic Importance
1
1.1.2 Production
of
Potable Water 2
1.1.2.1 Break-Point Chlorination and Ozonization
3
I.
1.2.2 Flocculation and Sedimentation 4
1
.I
.2.3 Filtration 5
1.1.2.4
1.1.2.5 Activated Charcoal Treatment 7
1.1.2.6 Safety Chlorination 8
1.1.2.7 Production of Soft or Deionized Water 8
1.1.3 Production of Freshwater from Seawater and Brackish Water
10
1.1.3.1 Production by Multistage Flash Evaporation
10
1.1.3.2
References for Chapter 1.1
:
Water 13
Removal of Dissolved Inorganic Impurities
5
Production using Reverse Osmosis
11
1.2
Hydrogen
14
I
.2.1 Economic Importance
I4
1.2.2 Hydrogen Manufacture
I5
1.2.2.
I
Petrochemical Processes and Coal Gasification 15
1.2.2.2 Electrolysis of Water 16
I
.2.2.3 Other Manufacturing Processes for Hydrogen
I7
I
.2.2.4
I
.2.3 Hydrogen Applications 18
References for Chapter 1.2: Hydrogen 19
Production of Hydrogen
as
a
Byproduct 18
1.3
1.3.1
1.3.
I.
I
1.3.1.2
1.3.1.3
1.3.2
1.3.2.1
1.3.2.2
I
.3.2.3
I
.3.2.4
I
.3.2.5
Hydrogen Peroxide and Inorganic Peroxo Compounds
20
Economic Importance 20
Hydrogen Peroxide 20
Sodium Perborate and Sodium Carbonate Perhydrate 20
Alkali Peroxodisulfates and Sodium Peroxide 2
1
Production 21
Hydrogen Peroxide 21
Sodium Perborate 24
Sodium Carbonate Perhydrate
25
Alkali Peroxodisulfate 26
Sodium Peroxide 26
X
Contents
1.3.3 Applications 27
1.3.3.1
1.3.3.2 Alkali Peroxodisulfates and Sodium Peroxide 28
References for Chapter 1.3: Hydrogen Peroxide and Inorganic Peroxo Compounds 28
Hydrogen Peroxide, Sodium Perborate and Sodium Carbonate Perhydrate 27
1.4
1.4.1 Ammonia 29
1.4.1.1 Economic Importance 29
1.4.1.2 Synthetic Ammonia Manufacture 29
1.4.1.2.1
General Information 29
1.4.1.2.2 Ammonia Synthesis Catalysts
30
1.4.1.2.3 Synthesis Gas Production 32
1.4.1.2.4
1.4.
I
.2.5
1.4.1.3 Ammonia Applications 43
References for Chapter
I
.4: Nitrogen and Nitrogen Compounds 43
1.4.2 Hydrazine 43
1.4.2.1 Economic Importance 43
1.4.2.2 Manufacture of Hydrazine 44
I
.4.2.2.1 Raschig Process 44
1.4.2.2.2 Urea Process 45
1.4.2.2.3 Bayer Process 46
1.4.2.2.4 H,Oz Process
47
1.4.2.3 Applications of Hydrazine 48
References for Chapter 1.4.2: Hydrazine 49
I
.4.3 Hydroxylamine
50
1.4.3.1
I
.4.3.2 Manufacture
50
1.4.3.2.1 Raschig Process 5
1
1.4.3.2.2
I
.4.3.2.3
References for Chapter 1.4.3: Hydroxylamine 53
1.4.4 Nitric Acid 53
1.4.4.1 Economic Importance 53
1.4.4.2 Manufacture 53
I
.4.4.2.
I
Fundamentals of Nitric Acid Manufacture 53
1.4.4.2.2 Plant Types 57
1.4.4.2.3 Process Description 58
1.4.4.2.4
1.4.4.2.5
Tail
Gases from Nitric Acid Manufacture 62
1.4.4.3 Nitric Acid Applications 64
References for Chapter 1.4.4: Nitric Acid 65
Nitrogen and Nitrogen Compounds
29
Conversion of Synthesis Gas
to
Ammonia 39
Integrated Ammonia Synthesis Plants
41
Economic Importance and Applications
50
Nitrogen(I1) Oxide Reduction Process
5
1
Nitrate Reduction Process (DSM/HPO-Stamicarbon) 52
Manufacture
of
Highly Concentrated Nitric Acid 59
1.5
1.5.1
1.5.1.
I
Raw Materials 65
Phosphorus and its Compounds
65
Phosphorus and Inorganic Phosphorus Compounds 65
[...]... Storage of Radioactive Waste 623 References for Chapter 6: Nuclear Fuel Cycle 624 Company Abbreviations Index 627 Subject Index 63 1 XXV Industrial inorganic Chemistry Karl Heinz Bbchel Hans-Heinrich Moretto & Peter Woditsch copyright0 WlLEY VCH Verldg GmbH, 2MlO 1 Primary Inorganic Materials 1.1 Water 1.1.1 Economic Importance Water is a raw material which is available on Earth in unlimited quantities... Applications 292 References for Chapter 3.5: Manganese Compounds and Manganese 293 3.5 4 Organo-Silicon Compounds 295 4.1 Industrially Important Organo-Silicon Compounds, Nomenclature 295 4.2 4.2.1 4.2.2 4.2.2.1 4.2.2.2 4.2.2.3 4.2.2.4 4.2.2.5 Industrially Important Silanes 296 Organohalosilanes 296 Industrial Important Silicon-functional Organo-Silanes 298 Organoalkoxysilanes 299 Acyloxysilanes 300 Oximino-... Silicon and its Inorganic Compounds 269 3.4 3.4.1 Elemental Silicon 269 3.4.1.1 General Information and Economic Importance 269 3.4.1.2 Manufacture 270 3.4.1.2.1 Ferrosilicon and Metallurgical Grade Silicon 270 3.4.1.2.2 Electronic Grade Silicon (Semiconductor Silicon) 272 3.4.1.3 Silicon Applications 278 3.4.2 Inorganic Silicon Compounds 279 References for Chapter 3.4: Silicon and its Inorganic Compounds... Importance 306 Linear and Cyclic Polyorganosiloxanes 307 Manufacture 307 Hydrolysis 307 Methanolysis 309 Cyclization 3 10 Polymerization 310 Polycondensation 3 I2 Industrial Realization of Polymerization 3 I3 Manufacture of Branched Polysiloxanes 3 14 4.4 Industrial Silicone Products 307 4.4.1 Silicone Oils 307 4.4.2 Products Manufactured from Silicone Oils 3 16 4.4.3 Silicone Rubbers 3 17 4.4.3.1 Room Temperature... 1.5.1.2 Products 67 1.5.1.2.1 Phosphoric Acid 67 1.5.1.2.2 Phosphoric Acid Salts 75 1.5.1.2.3 Phosphorus 80 Products Manufactures from Phosphorus 85 I 5 I 2.4 References for Chapter 1.5.1: Phosphorus and Inorganic Phosphorus Compounds 90 1.5.2 Organophosphorus Compounds 9 1 1.5.2.1 Neutral Phosphoric Acid Esters 9 1 1.5.2.2 Phosphoric Ester Acids 94 1.5.2.3 Dithiophosphoric Ester Acids 94 Neutral Esters... Rubbers 320 4.4.3.5 Properties of Silicone Rubber 322 4.4.4 Silicone Resins 322 4.4.5 Silicone Copolymers, Block Copolymers and Graft Copolymers 323 References for Chapters 4.3 and 4.4: Silicones 324 5 Inorganic Solids 325 5.1 Silicate Products 325 Glass 325 Economic Importance 325 Structure 32.5 Glass Composition 326 Glass Manufacture 329 Glass Raw Materials 329 Melting Process 33 I Melting Furnaces... 349 5.1.3.7.5 References for Chapter 5.1.3: Zeolites 350 5.2 5.2.1 5.2.1.1 5.2.1.2 5.2.1.3 5.2.1.4 5.2.1 5 5.2.2 5.2.2.1 5.2.2.2 5.2.2.3 5.2.3 5.2.3 I 5.2.3.2 5.2.3.3 5.2.4 5.2.5 5.2.5.1 5.2.5.2 5.2.5.3 Inorganic Fibers 351 Introduction 35 1 Definitions, Manufacture and Processing 35 1 Economic Importance 352 Properties 352 Classification and Applications 354 Physiological Aspects 354 Asbestos Fibers... 386 5.2.8 Ceramic Reinforcing Fibers 388 5.2.8.1 General information and Economic Importance 388 5.2.8.2 Oxide Fibers 389 5.2.8.3 Non-oxide Fibers 39 1 5.2.8.4 Whiskers 394 References for Section 5.2: Inorganic Fibers 395 5.3 5.3.1 5.3.2 5.3.2.1 5.3.2.2 5.3.2.3 5.3.2.4 5.3.2.4.1 5.3.2.4.2 5.3.2.4.3 5.3.2.5 5.3.2.6 5.3.3 5.3.3.1 5.3.3.2 5.3.3.3 5.3.3.3.1 5.3.3.3.2 5.3.3.3.3 5.3.3.3.4 5.3.3.4 5.3.3.5... Sulfates 544 Other Synthetic Fillers 545 5.8.4.5 5.8.5 Properties and Applications 545 References for Chapter 5.8: Fillers 546 5.9 5.9.1 5.9.2 5.9.2.1 5.9.2.2 5.9.2.2.1 5.9.2.2.2 5.9.2.2.3 5.9.2.2.4 5.9.2.3 Inorganic Pigments 548 General Information and Economic Importance 548 White Pigments 552 General Information 552 Titanium Dioxide Pigments 553 Economic Importance 553 Raw Materials for Ti02 Pigments 553... Pigments 581 5.9.5.3 Luminescent Pigments 581 5.9.6 Magnetic Pigments 582 5.9.7 General Information and Properties 582 5.9.7.1 5.9.7.2 Manufacture of Magnetic Pigments 584 References for Chapter 5.9: Inorganic Pigments 586 6 Nuclear Fuel Cycle 587 6.1 Economic Importance of Nuclear Energy 587 6.2 General Information about the Nuclear Fuel Cycle 591 6.3 Availability of Uranium 592 6.4 6.4.1 6.4.2 6.4.2.1 . Peter Woditsch Industrial Inorganic Chemistry Industrial Karl Heinz Buchel Hans-Heinrich Moretto Peter Wodi t sc h Second, Completely Revised Edition inorganic Translated by C hemi. Printed in the Federal Republic of Germany Preface to the Second English Edition In the more than 10 years, since the publication of the first edition of the book Industrial Inorganic Chemistry ,. Chemistry , the structure of inorganic industrial chemistry has not changed fundamentally. In most sectors the “state of the art” has been expanded and refined. This is addressed together with the