16/8/4 CH H.264 Multiplex DVR User Manual This symbol is intended to alert the user to the presence of unprotected “Dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural I VER.:1.0, P/N: 040179A resources For more detailed information about recycling of this product, please contact your local city office , your household waste disposal service or the shop where you purchased the product II All the safety and operating instructions must be read before the unit is operated • Make sure to switch the power off before you install the DVR • There is the danger of an electric shock if the DVR is opened by an unqualified service engineer or installer • Avoid using the DVR outside of the reference temperature and humidity indicated in the specification • Avoid exposing the DVR to violent movement or vibration • Do not use or store the DVR in direct sunlight or near to any source of heat • Do not place any object into the holes used for air circulation • Always use the DVR in a well ventilated location to prevent overheating • Risk of explosion if battery is replaced by an incorrect type • Dispose of used batteries according to the instructions • The recommended HDD types are Samsung Electronic, Western Digital and Seagate III TABLE OF CONTENTS Chapter Features Chapter Packing Detail Chapter Location and Control 3.1 Front Panel Controls .3 3.2 Real Panel Connectors 3.3 Remote Controller 3.4 Mouse Control Chapter Installation .10 4.1 TOTAL CONNECTION LAY-OUT 10 4.2 HDD INSTALLATION 11 4.3 MAIN DEVICES INSTALLATION 13 4.3.1 Camera .13 4.3.2 Audio .13 4.3.3 Monitor 14 4.4 SENSOR INPUT 17 4.4.1 Sensor Input Menu Setup 17 4.5 RS-485 18 4.5.1 RS-485 Menu Setup 18 4.5.2 PTZ Camera Installation 18 4.5.3 PTZ Camera Operation 19 4.5.4 PTZ Camera Preset Mode .19 4.6 Relay Output .20 Chapter Basic Operation and Menu Setup 22 5.1 Basic Operation 22 5.1.1 Power ON/OFF 22 5.1.2 Screen Display 22 5.1.3 System Status 23 5.1.4 Audio Control 24 5.1.5 PIP Mode 24 5.1.6 DIGITAL ZOOM .25 5.1.7 Menu Operation .25 5.2 SCREEN .26 5.2.1 AUTO SEQUENCE 26 5.2.2 DISPLAY 27 5.2.3 TITLE 28 5.2.4 COVERT 28 IV 5.2.5 SPOT .29 5.2.7 CAMERA 30 5.3 SYSTEM .30 5.3.1 HDD 30 5.3.2 CLOCK 31 5.3.3 VIDEO STANDARD 32 5.3.4 LANGUAGE 32 5.3.5 REMOTE CONTROL ID 32 5.3.6 KEY ECHO .32 5.3.7 ADVANCED SETUP 33 5.3.8 FIRMWARE UPGRADE 35 Chapter Record Operation and Menu Setup 36 6.1 Record Operation 36 6.2 QUICK SETUP 37 6.3 RECORD SETUP .39 6.4 EVENT SETUP 40 6.4.1 MOTION DETECTION 40 6.4.2 EVENT SCREEN MODE .41 6.4.3 EVENT MESSAGE 41 6.4.4 EVENT MESSAGE RESET 41 6.4.5 EVENT BUZZER 41 6.4.6 EVENT RECORD 41 6.5 OTHER RECORD SETUP 43 6.5.1 PREVIEW QUALITY .43 6.5.2 AUDIO RECORD 44 6.5.3 REPEAT RECORD 44 6.5.4 PLAY MODE 44 6.5.5 HOLIDAY .44 Chapter Search Operation and Menu Setup 46 7.1 CALENDAR SEARCH 46 7.2 SEARCH© .47 7.3 TIME SEARCH 47 7.4 EVENT SEARCH 48 7.5 BLOCK SEARCH 48 7.6 FILE SEARCH 49 7.7 BOOKMARK SEARCH 49 7.8 LOG FILE SEARCH 50 7.9 SEARCH BUTTON INFORMATION .50 Chapter Copy Operation and Menu Setup 53 V 8.1 COPY 53 8.1.1 Copy to USB Storage Device 53 8.1.2 Copy to DVD±RW 54 8.1.3 STOP COPY 54 8.1.4 CONTINUE COPY 54 8.2 COPY STATUS 55 8.3 FORMAT MEDIA 55 Chapter Network Setup and Operation 57 9.1 NETWORK SETUP 57 9.2 DVR-VIEWER INSTALLATION .59 9.2.1 System Requirement 59 9.2.2 Network Environment .59 9.2.3 Installation Steps .59 9.3 DVR-Viewer Control Panel Introduction 63 9.4 DVR-Viewer Operation 65 9.4.1 DVR-Viewer Software Password 65 9.4.2 DVR List 65 9.4.3 HDD Search .67 9.4.4 File Search 68 9.4.5 Arrange Windows .68 9.4.6 Viewer Option 69 9.4.7 Display 70 9.4.8 DVR Controller .71 9.4.9 PTZ Controller 71 9.4.10 SETUP 72 9.4.11 STATUS 75 9.4.12 PRINT .76 9.4.13 COPY 77 9.4.14 SEARCH 77 9.4.15 Record and Playback Control Buttons 77 Chapter 10 Additional Function Operation and Menu Setup 79 10.1 E-mail .79 Chapter 11 Specification 81 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information herein VI Chapter Features H.264 compression for DVR recording and web transmission Graphic OSD and mouse control(PS/2) Live display, record, backup, playback and network access as the same time DVD writer (optional) and USB device backup Remote view and manage through 16CH client software and IE browser Audio recording Motion detection with area selecting and sensitivity adjusting by each camera Remote controller Email notification Control all functions of PTZ camera TCP/IP, DHCP, DDNS, Dynamic IP network protocol System auto recovery after power reconnected Watermark proof Manual / event / schedule recording Multi-language OSD: English /Polish / Spanish / Russian / Traditional Chinese / French / Turkish / German / Italian / Portuguese Chapter Packing Detail DVR Client Viewer Software CD Power Cord User Manual Power Adapter CONTENTS DVR Client Viewer Software CD User Manual Remote Controller Power Cord Power Adapter Battery Remote Controller Battery Chapter Location and Control 3.1 Front Panel Controls 13 14 Item 15 16 17 19 18 20 10 11 12 25 21 22 23 24 Description DVD-RW A DVD-RW drive is installed in the front bay (sold separately) EJECT Press EJECT button to open/close the DVD-RW drive IR RECEIVER Infrared signal receiver for the IR remote controller Do not block the receiver as a clear line of sight is required for proper operation NUMERIC BUTTON / (a) CHANNEL SELECT screen (b) PLAY / PAUSE ( selects a specific channel number to be displayed in full ) / Z(-) enter the numeric password when prompted (c) number for audio function (a) Starts the playback of recorded data By default, the playback starts from the earliest recording (b) Toggles between playback and pause mode (c) Zoom out (PTZ mode) FAST ( ) /Z(+) (a) Fast forward Press this button repeatedly to toggle between 2X normal playback speed through 128X normal playback speed RECORD () (b) button starts and stops the recording mode Zoom in (PTZ mode) This STATUS LED Displays the status of the DVR (standby), HDD read/write and network transmission ALARM RESET / LEFT (a) resets the alarm buzzer DIRECTION BUTTON ( ) (b) left pans in PTZ mode (c) navigates left in the menu screen (d) moves the zoom box left in zoom mode 9.4.4 File Search Some users copy the DVR record data to DVD or USB storage device Then use File Search function to search and playback these data on PC Click on the File Search button, the following window appears: Select the desired search path through “Folder Select” After selecting the desired Search Time, the results will be shown in above list Select the desired file and click on “Play” to playback Click on “AVI Convert” button to convert the selected file to AVI format 9.4.5 Arrange Windows Arrange the windows opened by DVR-Viewer automatically * window * ~ windows *5 ~ windows *10~16 windows 68 Double click on one window in multi display mode to extend to full screen 9.4.6 Viewer Option 69 Display: - Channel Title: Show the Channel Title on the screen - Event: Show the event occured channel as Red on the screen - Date Time: Show the DVR date and time on the screen - Frame Rate: Show the Frame Rate on the screen Play Mode: - Frame Mode: It will playback images in frame mode which is useful for recorded images in high frame rate This may occurs moving artifact with recorded images in low frame rate - Field Mode: It will playback images in field mode This reduces the resolution, but is suitable for recorded images in low frame rate Dynamic IP Server: Set the IP address of Dynamic IP Server and Backup IP Server Warning Sound: Check “Event” means the warning sound will be enabled while event occurring Event Mode: Check “Pop Up Window” means the warning window will be poped up while event occurring WaterMark Check: To confirm the data correctness under LIVE mode or Playback mode File Split Mode: User can arrange the order of channels on demand when use FILE SEARCH User Management: To Add/Change/Delete the users and their rights of DVR-Viewer 9.4.7 Display a Signal Display Mode: Click on the desired channel button to display as Signal Display Mode 70 b Multi Display Mode Click on “MULTI” button to display as Multi Display Mode Click on “MULTI” again to return to Signal Display Mode c Auto Sequence Mode Click on “AUTO” button to display as Auto Sequence Mode, and you can also set the sequence time 9.4.8 DVR Controller Press “Controller” button, a control panel similar to DVR front panel will appears 9.4.9 PTZ Controller Use the PTZ Controller to control PTZ camera through internet AF: AutoFocus Adjustment Zoom: PTZ camera Zoom in/Zoom out control 71 Focus: PTZ camera Focus adjustment Preset You can preset the desired PTZ camera position and save as a Preset Point DVR provides 16 Preset Points for your setting Adjust all PTZ camera settings and then click on any of the 16 buttons in Set line to save as Preset Point You can also apply the Preset Point to any PTZ camera Select the desired channel and click on any of the 16 buttons in Move line, then the PTZ camera will move to the preset position 9.4.10 SETUP Click on “SETUP” button and input the DVR ADMIN password, you can enter to the DVR muen setup Save To File: Save the DVR menu settings to a file Read From File: Read the DVR menu settings from a file Load From DVR: Load the real time settings from DVR to PC Update to DVR: Update the menu settings in PC to DVR QUICK SETUP Please refer to 6.2 QUICK SETUP SCREEN You can generate a channel title as a Bitmap file and load to DVR in the SCREEN-TITLE page Input the desired words in below box, adjust the Font type and position, then click on “Make Bitmap” 72 button to generate a Bitmap file Click on “Download” button to load the Bitmap file to DVR Change the Channel Title Mode to BITMAP, then you can see the new title in Bitmap mode on DVR For the rest settings, please refer to 5.1.2 SCREEN RECORD To set the Schedule Record, please click on an hour block and then click “SCHEDULE RECORD ON/OFF” The enabled hour blocks will become Green 73 Turn the wheel scroll of the mouse on specific hour block to change the Record Program (0~9); double click the left key of mouse, the following window appears: For the rest settings, please refer to 6.3 RECORD SETUP EVENT Please refer to 6.4 EVENT SETUP SYSTEM Please refer to 5.3 SYSTEM 74 LINK Please refer to Chapter and 9.1 NETWORK SETUP DOWNLOAD Download the Firmware from DVR to PC 9.4.11 STATUS Click on “STATUS” button to review the System/Record/Network/Bit Rate status 75 9.4.12 PRINT Click on the “PRINT” button to make a screen snapshot and save as a file The size of snapshot is depend on the Record Image Size (D1。Half-D1。CIF) 76 9.4.13 COPY Copy the DVR images to PC Select the desired HDD, Time and channel, click on “Copy” button to start copy The Copying stutus will be shown as below Click on “OK” button after the copy finished, the file will be saved in C:\Program Files\DVR \DVR-Viewer\Copy automatically 9.4.14 SEARCH Please refer to Chapter Search Operation and Menu Setup 9.4.15 Record and Playback Control Buttons 1 Fast Backward (2X~128X) Playback Backward Picture by Picture (2X~128X) Playback Backward Paush Playback Forward Playback Forward Picture by Picture (2X~128X) Fast Forward (2X~128X) Record 77 Click on Record button to record the LIVE images on PC as a file The file will be saved in C:\Program Files\DVR \DVR-Viewer\Save automatically 78 Chapter 10 Additional Function Operation and Menu Setup 10.1 E-mail Enter the LINK -> E-mail menu SEND E-MAIL Select from “ON”, “OFF”, The default is “OFF” When SEND E-MAIL set to “ON”, DVR will send a e-mail when an event happened SMTP SERVER ① Move the cursor to SMTP SERVER and press ENTER button to input the IP address ② Select the character using the , , , buttons and then press the ENTER button ③ To exit this CHARACTER TABLE screen, press the ESC button DVR E-MAIL ADDR To set the E-Mail Receiver address when event occurs ① Move the cursor to DVR E-MAIL ADDR and press ENTER button: 79 ② Select the character using the , , , buttons and then press the ENTER button ③ To exit this CHARACTER TABLE screen, press the ESC button USER ID ① Move the cursor to USER ID and press ENTER button: ② Select the character using the , , , buttons and then press the ENTER button ③ To exit this CHARACTER TABLE screen, press the ESC button PASSWORD ① Move the cursor to PASSWORD and press ENTER button: ② Select the character using the , , , buttons and then press the ENTER button ③ To exit this CHARACTER TABLE screen, press the ESC button 80 Chapter 11 Specification MODEL NO VIDEO RYK-9254 RYK-9258 VIDEO SYSTEM INPUT Auto Detection 4CH BNC 8CH BNC LOOP VGA 1CH BNC Composite Video / VGA (select from front panel) SOPT OUTPUT 1CH BNC INPUT 1CH RCA OUTPUT 1CH RCA REMOTE SENSOR 16CH BNC - MAIN OUTPUT AUDIO RYK-9256 - INPUT 4CH ALARM INPUT 8CH ALARM INPUT 16CH ALARM INPUT OUTPUT STORAGE 1CH RELAY OUTPUT DEVICE SATA hard disks (7,200RPM, 45MHz DMA, MAX 1TB) OPTION DVD WRITER DISPLAY DIVISION 1,4 1,4,6,7,9 ZOOM 2X OSD RECORDING 1,4,6,7,9,10,13,16 Graphic OSD COMPRESSION RESOLUTION H.264 720x480, 720x240, 360x240 (NTSC) 720x576, 720x288, 360x288 (PAL) FRAM NTSC 60, 120, 120FPS 60, 120, 240FPS 60, 120, 240FPS ERATE PAL 50, 100, 100FPS 50, 100, 200FPS 50, 100, 200FPS QUALITY Fine / Normal / Low RECORD MODE Manual, Motion Detection, Sensor, Video Loss WATERMARK CONTROL MOTION YES User selectable motion detection area for each camera individually DETECTION ALARM Sensitivity: 10 levels PRE 0~5 sec POST 0~60 sec EVENT LOG Alarm, Motion, Video Loss, Power Loss, Power and Record on/off REMOTE CONTROLLER YES PTZ CAMERA YES 81 PLAYBACK SEARCH MODE SPEED Time, Calendar, Event, File, Blockl Normal, REW&FF [1x/2x/4x/16x/32x/64x/128x], Picture to Picture, Pause DEVICE BACKUP FILE NETWORK Internal / External HDD from USB Interface Device H.264 compression and AVI format (converted by client viewer) COMPRESSION H.264 NETWORK INTERFACE 16CH Client Viewer, Web Browser SPEED PROTOCOL 120 Frames per second TCP/IP, SMTP, HTTP, DHCP, DDNS WEB BROWSER BACKUP Internet Explorer 5.0 or higher INTERNAL DVD±RW, DVD RAM EXTERNAL USB HDD, USB DVD Writer, USB Memory Stick and Network Backup SYSTEM LOG MODE Power Failure Check / Menu Change / Network Connection LOG Numbers 20,000 records MONITORING Software Watchdog RECOVERY FIRMWARE UPGRADE Auto-Reboot By Watchdog USB 2.0 Port (1 Port at Front Panel), Network POWER SOURCE DC12V 82 ... Chapter Packing Detail DVR Client Viewer Software CD Power Cord User Manual Power Adapter CONTENTS DVR Client Viewer Software CD User Manual Remote Controller Power Cord Power Adapter Battery Remote... ADMIN is 11111111, USER1 is 22222222, 33 USER2 is 33333333, USER3 is 44444444, USRE4 is 55555555 CAUTION: For security reason, please change the password after purchasing 5.3.7.3 USER AUTHORITY You... Loss MOTION: Motion Detection HDD ERROR POWER: Power break USER: Manual Relay Output 20 NOTE: Use the FUNCTION button to enter the manual Relay mode - NC→NO: Press the F(+) button - NO→NC: Press