QuickSpecs HPE ProLiant DL380 Gen10 Server Core Options Page 53 Notes Legacy FIO Mode (758959 B22) not supported with this option on Networking Choice (NC) Configure to Order (CTO) chassis To continue.
QuickSpecs HPE ProLiant DL380 Gen10 Server Core Options Notes: Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configureto-Order (CTO) chassis To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected HPE Ethernet 10Gb 2-port SFP+ BCM57414 Adapter Notes: Cannot be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter HPE Ethernet 10Gb 2-port BASE-T X550-AT2 Adapter P08421-B21 727055-B21 817738-B21 25 Gigabit Ethernet adapters Notes: Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter HPE Ethernet 10/25Gb 2-port SFP28 QL41401-A2G Adapter HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter Notes: Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configureto-Order (CTO) chassis To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected HPE Ethernet 10/25Gb 2-port SFP28 MCX4121A-ACUT Adapter 867328-B21 817718-B21 817753-B21 100 Gigabit Ethernet Adapters HPE Ethernet 100Gb 1-port QSFP28 MCX515A-CCAT Adapter 874253-B21 Notes: - The DL380 Gen10 embedded LOM chassis ships standard with 4x Gb embedded - A minimum of two Gigabytes (2 GB) of server memory is required per each adapter - Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately Please see the related NIC QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/us/en/product-catalog/servers/adapters/pip.models.hpe-storefabric-converged-networkadapters.4118472.html FlexibleLOM adapters Pensando Distributed Services Platform for HPE iLO Sideband Management Adaptive LOM Module Notes: - This option requires the selection of Pensando DSP 10/25G 2p SFP28 Card (P26966-B21) - Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-toOrder (CTO) chassis To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected - This option cannot be selected with any GPU HPE Ethernet 1Gb 4-port FLR-T I350-T4V2 Adapter HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter HPE FlexFabric 10Gb 2-port FLR-T 57810S Adapter HPE FlexFabric 10Gb 2-port FLR-SFP+ 57810S Adapter HPE Ethernet 10Gb 2-port FLR-T BCM57416 Adapter HPE FlexFabric 10Gb 4-port FLR-T 57840S Adapter HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter HPE Ethernet 10/25Gb 2-port FLR-SFP28 BCM57414 Adapter HPE Ethernet 10/25Gb 2-port FLR-SFP28 MCX4121A-ACFT Adapter HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter HPE Ethernet 10Gb 2-port FLR-T X550-AT2 Adapter P26969-B21 665240-B21 629135-B22 700759-B21 700751-B21 817721-B21 764302-B21 P08440-B21 817709-B21 817749-B21 727054-B21 817745-B21 Page 53