COFFEEͳBREAK ORIGAMI Repeat steps 5–6 on the left top flap (In other words stand the flap up an angle, separate its left edges; and then, squash the flap.) Pull the single front layer out from under the diamond-shaped flaps The large flap is now in front of the diamond shapes 31 Bring the two white flaps 10 Bring the front and that are inside the model in front of the two diamondshaped flaps middle layers toward you by pulling on the front flap Stand the model Create a Halloween scene The scene shown in the photograph includes Oval Leaf (taught in this chapter) and Jack-O’-Lantern (which is taught in the next chapter) 11 While holding down the bottom edge of the model with your left hand, grab the top with your right hand and stretch it up and away from you as far as possible Repeat this process a few times so that the model will stand upright Ori for Busy People_INT 00-96 27jul.indd 31 12 Notice that the front of the body has a concave shape For an attractive Halloween decoration, display a pair of ghosts—one made from black origami paper and the other from orange origami paper 7/27/11 3:55:07 PM