Au77s how to make a program

Au77s-How to make program 深深深深 深深深深深深深深深深深深深 Shenzhen Axxon Automation Co.,Ltd 深深深深深深深深深深深深深深 3C Unit CD/3F 深 Tianji Building Tianan Cyber Park Futian District 深 Shenzhen China 518040 Tel: +86-755-83586066 Fax:+86-755-83583279 How to make a program Create the fiducial point Create the sub template Set the mark Set the dispensing parameter Place the template under the main program Teach the program www.axxonauto.com Set the fiducial point Fisrt Step 深 Click the Program Edit button enter the program teaching window Second Step 深 Click the new folder button to set the reference point will appear a figure as the left image Third Step 深 Click teaching button will appear the visual teaching window www.axxonauto.com Set the fiducial point Fourth Step : Move to the place that you want to set by the direction button and make the view clear then click ok After this step click save button www.axxonauto.com Save Program Click the icon to save the program Enter the file name that you want and click save button www.axxonauto.com Create sub template name Click the icon to create a sub template as the below window Then enter the name and click ok www.axxonauto.com Set the mark First step: Select the present sub template aa as the left image Second step: Second step: Click the icon will appear the mark setting window.Select the pattern aa Select the mark mode means the number of mark,then click next www.axxonauto.com Set the mark Third Step: Adjust the light and the Z axis to make the view clear and click Teach and Next as the left window Fourth Step: Click the icon the test and select the mark then click button,when the lower left corner indicator become green,click Next.Set the second mark as the first one www.axxonauto.com Set the mark-similarity This value means that the mark point must 60% similarity as the setted one so the mark can be passed Usually the value is biger than 60% www.axxonauto.com Teach the program First Step: Select the sub template aa,then click the icon to start teach program www.axxonauto.com Teach the program-Different pattern Dot:Under this pattern,the valve will dispense depend on the dot dispense parameter Line:The valve will constantly dispense until encounter the ValveOff command.And it will constantly dispense according to the open and close valve time This pattern mainly used for encapsulation without strict process requiremt For example: Line:1,(95.148,102.912,28.931),ValveOn Line:1,(80.452,102.570,28.931),ValveOn Line:1,(95.148,100.632,28.931),ValveOn Line:1,(80.406,100.120,28.931),ValveOn Line:1,(80.452,97.748,28.931),ValveOn Line:1,(95.148,98.838,28.931),ValveOff www.axxonauto.com Pattern-Linefix Linefix:Equal distance dispensing pattern Every dot Dispenses equal volume of glue between the start and end point.The volume depends on the dispensing parameter that you setted It mainly used for underfill applicaiton For example 深 LineFix:1,(95.148,102.912,28.931),ValveOn LineFix:1,(80.452,102.570,28.931),ValveOff LineFix:1, (95.148,100.632,28.931),ValveOn LineFix:1,(80.406,100.120,28.931),ValveOff LineFix:1,(80.452,97.748,28.931),ValveOn LineFix:1,(95.148,98.838,28.931),ValveOff   www.axxonauto.com Pattern-linend Linend 深 unequal distance dispensing pattern The motor's speed won't reduced when the valve moves to the dispensing position For example 深 LineEnd:1,(95.148,100.912,28.931),ValveOn LineEnd:1,(95.148,101.912,28.931),ValveOn LineEnd:1, (95.148,104.912,28.931),ValveOn LineEnd:1,(95.148,110.912,28.931),ValveOn LineEnd:1, (95.148,119.912,28.931),ValveOn LineEnd:1,(95.148,120.912,28.931),ValveOff www.axxonauto.com Place the template under the main program First Step: Select the main interface Second Step 深 Click the icon will appear a window as the left Third Step: Select the sub template aa and click locate,then the camera will move to the first mark point.After clicking teach and complete www.axxonauto.com THANK YOU 2012 PPT FOR Axxon automation 深深深深 深深深深深深深深深深深深深 Shenzhen Axxon Automation Co.,Ltd 深深深深深深深深深深深深深深 3C Unit CD/3F 深 Tianji Building Tianan Cyber Park Futian District 深 Shenzhen China 518040 Tel: +86-755-83586066 Fax:+86-755-83583279 .. .How to make a program Create the fiducial point Create the sub template Set the mark Set the dispensing parameter Place the template under the main program Teach the program www.axxonauto.com... clear then click ok After this step click save button www.axxonauto.com Save Program Click the icon to save the program Enter the file name that you want and click save button www.axxonauto.com... Click teaching button will appear the visual teaching window www.axxonauto.com Set the fiducial point Fourth Step : Move to the place that you want to set by the direction button and make the