publications APPENDIX 5 PROFESSOR ALLAN MATTHEWS PUBLICATIONS LIST Refereed Journal and Refereed Proc Papers 1 A Matthews and D G Teer, “Ion plated titanium nitride coatings for dies and moulds” Proc[.]
APPENDIX PROFESSOR ALLAN MATTHEWS PUBLICATIONS LIST Refereed Journal and Refereed Proc Papers A Matthews and D G Teer, “Ion plated titanium nitride coatings for dies and moulds” Proc of the International Conference on Ion Plating and Allied Techniques, London, June 1979 Published by CEP Consultants Ltd., Edinburgh, 1979 A Matthews and D G Teer, “Evaluation of coating wear resistance for bulk metal forming” Proc of the International Conference on Metallurgical Coatings, San Diego, USA, 1980 Thin Solid Films, 72, 315 (1980) A Matthews and D G Teer, “Deposition of Ti-N compounds by thermionically assisted triode reactive ion plating” Proc of the International Conference on Metallurgical Coatings, San Diego, USA, 1980 Thin Solid Films, 72, 541 (1980) H A Sundquist, A Matthews and D G Teer, “Ion plated aluminium bronze coatings for sheet metal forming dies” Proc of the International Conference on Metallurgical Coatings, San Diego, USA, 1980 Thin Solid Films, 73, 309 (1980) A Matthews, “Plasma assisted vacuum coatings” Tribologiset Pinnoitteet Seminar Proceedings, Helsinki University of Technology, (1980) ISBN 951-752-0271 J Halling, A Matthews and D G Teer, “Surface coatings for cutting and forming tools” Proc of the Conference on Tribology in Metal Working, London 1980 Published by the Institution of Mechanical Engineers and the Metals Society, (Publication C173), London, (1980) J Halling, D G Teer and A Matthews, “Wear resistant coatings deposited by ion plating” Proc of the Eurotrib 81 Conference, Warsaw, Poland, (1981) Published by the International Tribology Council A Matthews, “Surface coating technology” Principles of Tribology, published by the Finnish Engineering Society, INSKO, Helsinki, (1981) ISBN 951-793-514-5 A Matthews, D G Teer and J Halling, “Reactive ion plating of ceramic coatings for wear reduction in metal forming” Proc of the International Congress on Metals Engineering, Aston, 1981 Published in Trans Inst Met Fin, 59, 123, (1981) 10 A Matthews and D G Teer, “Characteristics of a thermionically assisted triode ion plating system” Proc of the International Conference on Ion and Plasma Assisted Techniques, Amsterdam, 1981 Thin Solid Films, 80, 41, (1981) 11 A Matthews, “A predictive model for specimen heating in ion plating” Vacuum TAIP, 32, 311, (1982) 12 A Matthews, “Production of tribological ceramic coatings” Tribologia, 1, 30, (1982) AMPUBS/1 13 A Matthews, “Avoidance of excessive substrate temperatures during plasma assisted processes” Proc of the Conference on Ion Assisted Techniques and Applications, Warwick, (1982) The Metals Society, London 14 A Matthews and H A Sundquist, "Titanium nitride coatings boost productivity" Engineering, 223, 43, (1983) 15 A Matthews and H A Sundquist, “Tribological studies of Ti-N films formed by reactive ion plating” Proc of the International Ion Engineering Congress, ISIAT 83, Kyoto, Japan, (1983) IEE (Japan) 16 A Matthews and K G Swift, “Intelligent knowledge based systems for tribological coating selection” Proc of the International Conference on Metallurgical Coatings, American Vacuum Society, San Diego, USA, 1983 Published in Thin Solid Films, 109, 365, (1983) 17 K G Swift and A Matthews, “A computer consultation system for coating selection” Product Finishing, 36, 19, (1983) 18 A Matthews, “The properties and applications of hard ceramic coatings” Proc of the Conference on Surface Treatment Technology (1984) The Institute of Metal Finishing, Birmingham 19 A Matthews, “The value of deposition processes for industrial tools” Proc of the Materials in Engineering Conference, Leeds, (1984) The Institute of Metallurgists, London 20 A Matthews and D T Gethin, “Heating effects in ionisation assisted processes” Proc of the International Conference on Metallurgical Coatings, American Vacuum Society, San Diego, USA, April 1984 Thin Solid Films, 117, 261, (1984) 21 A Matthews and K G Swift, “Expert systems and coating selection” The Surfacing Journal, 14, 62, (1984) 22 A Matthews, N M Brennan, T Pilkington and N Samin, “A pellet feeder for pulsed evaporation” Vacuum TAIP, 34, 805, (1984) 23 A Matthews and K G Swift, “Expert systems in engineering design” Engineering, 223, 673 (1983) 24 A Matthews and A R Lefkow, “Problems in the physical vapour deposition of titanium nitride” Proc of the 6th International Conference on Thin Films, ICTF6, Stockholm, Sweden, 1984 Published in Thin Solid Films, 126, 283, (1985) 25 A Matthews, “Developments in ionisation assisted processes” Proc of the International Conference on Metallurgical Coatings, Los Angeles, USA, 1985 Published in the Journal of Vacuum Science and Technology, A3, 2354, (1985) 26 A Matthews, “Plasma assisted coating processes - the background” UKAEA/NCT Report for the Department of Trade and Industry, (1984) AMPUBS/2 27 A Matthews, “Plasma assisted coating processes - scientific and technical studies” UKAEA/NCT Report for the Department of Trade and Industry, (1984) 28 A Matthews, “Plasma assisted coating processes - critical issues and future trends” UKAEA/NCT Report for the Department of Trade and Industry, (1985) 29 A Matthews, J Valli, U Makela and V Murawa, “2TiN coating adhesion studies using the scratch test method” Proc of the International Conference on Metallurgical Coatings, Los Angeles, USA, 1985 Published in Journal of Vacuum Science and Technology, A3, 2411, (1985) 30 V Korotchenko, A Matthews and C S Syan, “Ceramics and cermets in surface engineering” Proc of the 1st International Conference on Surface Engineering, Brighton, UK Published by the Welding Institute, Abingdon, (1985) 31 V Korotchenko and A Matthews, “Substrate temperature monitoring in ionisation assisted processes” Proc of the International Conference on Ion and Plasma Assisted Processes, IPAT 85, Munich, W Germany, 1985 Vacuum TAIP, 36, 61, (1986) 32 A Matthews and J Valli, “Alumina and titanium carbide coatings deposited by ionisation assisted reactive physical vapour deposition” Proc of the Surtec 85 Conference Interfinish, Berlin, W Germany, 1985 Published by Verein Deutscher Ingeniere (VDI) Dusseldorf, (1985) 33 H A Sundquist, A Matthews and J Valli, “Tribological coatings deposited by ion plating” Proc of the 4th International Tribology Symposium - Eurotrib 85, Lyon France, (1985) Published by the International Tribology Council 34 A Matthews, “Titanium nitride PVD coating technology” (1985) 35 A Matthews, “Plasma assisted coating technology” Proc of the PACT Seminar, Wattington UKAEA/DTI, (1985) 36 A Matthews and J Valli, “Ion plating - processes and limitations” Proc of the th Annual Electroplating Conference, Los Angeles, California, 1985 American Electroplaters Society, Los Angeles 37 J Valli and A Matthews, “Coating adhesion assessment using the scratch test method” Proc of the 5th Annual Electroplating Conference, Los Angeles, California, 1985 American Electroplaters Society, Los Angeles 38 K G Swift, A Matthews, P Firth and C S Syan, “Artificial intelligence in engineering design” Proc of the International Computer Aided Manufacturing Conference, Cam-i, Florida, USA, 1984 39 A Matthews and V Murawa, “Titanium nitride coatings extend tooling life” The Chartered Mechanical Engineer, 32, 31, (1985) 40 J Valli, U Makela and A Matthews, “The assessment of coating adhesion” Surface Engineering, 2, 49, (1986) AMPUBS/3 Surface Engineering, 1, 93, 41 A Matthews, “Ion plating - basics and applications” In Nitride and Carbide Coatings Manufacturing Technology Science and Applications Published by the Continuing Education Institute, Europe, Finspang, Sweden, 1985 42 A Matthews, “Ionisation assisted PVD processes - the problems remaining” Proc of the Topical Symposium on the Physics and Chemistry of Protective Coatings, Los Angeles, USA, 1985 American Vacuum Society, New York, 1986, ISBN 0-88318-348-X 43 K G Swift, A Matthews and C S Syan, “A logic based approach to problem solving in manufacturing engineering” Proc of the SERC/ACME Seminar on Computers in Process Planning, UMIST, Manchester, 1985 44 K G Swift, A Matthews and C S Syan, “The application of IKBS in design for assembly and surface treatment selection” Proc of the st International Conference on the Application of Artificial Intelligence to Engineering Problems, Southampton 1986 Published in Computational Mechanics, USA, 1986 45 A Matthews, “Ionisation assisted PVD processes and industrial applications” Proc of the 2nd International Conference on Physical Vapour Deposition, PVD 86, Darmstadt, W Germany, 1986 46 K S Fancey and A Matthews, “Ionisation assisted PVD of zirconia thermal barrier coatings” Proc of the International Conference on Metallurgical Coatings, ICMD 86, San Diego, USA J.Vac.Sci.Technol, A4, (6) 2656, (1986) 47 K G Swift, C S Syan and A Matthews, “The potential of IKBS in manufacturing engineering” Proc of the conference on the Application of Computers in Production Engineering, Edinburgh, 1986 IMechE/IProdE, London (1986) 48 A Matthews and K G Swift, “Expert systems to advise on design for manufacture” Proc of the Fintech AMT Seminar, Helsinki, Finland Published by DTI/Fintech 1986 49 A Matthews, “Advanced coating processes for manufacturing industry” Proc of the Fintech AMT Seminar, Helsinki, Finland Published by DTI/Fintech 1986 50 K S Fancey, A S James and A Matthews, “The potential of PVD thermal barrier coatings” Proc of the International Conference: `Engineering the Surface', London Institute of Metals, London, 1986 51 C S Syan, A Matthews and K G Swift, “Coating and treatment selection” Engineering, 2, 249, (1986) 52 A S James, K S Fancey and A Matthews, “RF reactive ion plating of stabilised zirconia thermal barrier coatings” Proc of the International Symposium on Trends and New Applications in Thin Films, Strasbourg, March 1987, Societe Francaise du Vide, Paris 53 A Matthews, A S James, A Leyland, K S Fancey, J Valli and J A Stainsby, “Tribological characterisation of some second generation ceramic coatings deposited by ionisation assisted PVD” Proc of Tribology 87, London, July 1987 Institution of Mechanical Engineers, London AMPUBS/4 Surface 54 C S Syan, A Matthews and K G Swift, “Knowledge-based expert systems in surface coating and treatment selection for wear reduction” Proc of the International Conference on Metallurgical Coatings, ICMC 87, San Diego, USA, March 1987 Surf Coat Technol, 33, 105-115, (1987) 55 A S James, K S Fancey and A Matthews, “Thermionically assisted RF PAPVD of stabilised zirconia thermal barrier coatings” Proc of the International Conference on Metallurgical Coatings, ICMC 87, San Diego, USA, March 1987 Surf Coat Technol, 32, 377-387, (1987) 56 K S Fancey and A Matthews, “Current density and cathode fall effects in ion plating” Proc of the International Conference on Ion and Plasma Assisted Techniques, IPAT 87, Brighton, May 1987 CEP Ltd., Edinburgh 57 Y Sun, P A Dearnley, A Matthews and T Bell, “A preliminary investigation of the wear of plasma nitrided 722M24 steel under applied rolling-contact traction” ibid 58 K S Fancey and A Matthews, “Some fundamental aspects of glow discharges in plasma assisted processes” Proc of the International Conference on Metallurgical Coatings, ICMC 87, San Diego, USA, March 1987 Surf Coat Technol, 33, 17-29, (1987) 59 A Matthews and J Valli, “Adhesion testing of coatings” Proc of the IFHT International Seminar on Plasma Heat Treatment, Senlis, France, September 1987 International Federation for the Heat Treatment of Materials, Paris 60 A Matthews, “Hard ceramic coatings” Engineering, December 1987, Technical File 61 A Matthews and K S Fancey, “Process mechanisms and control in ionisation assisted deposition systems” Proc of the SERC Research Conference, Cambridge University, 1987 62 K G Swift, A Matthews and C S Syan, “Coating selection using IKBS” Proc of the SERC Research Conference, Cambridge University, 1987 63 K S Fancey and A Matthews, “Ion plating process design criteria and systems optimisation” Proc of the International Conference on Metallurgical Coatings, ICMC 88, San Diego, USA, April 1988 Published in Surface and Coatings Technology, 36, 233, (1988) 64 A Matthews, “Coating selection for wear reduction” Proc of the International Conference on Materials and Engineering Design, London, May 1988 The Institute of Metals, London 65 A G Fitzgerald, M Simpson, G A Dederski, P A Moir, D Tither and A Matthews, “Triode technology in the sputter deposition of carbon films” Carbon, 26, 229-234, (1988) 66 A Matthews, “The role of physical vapour deposition as a manufacturing process” Advanced Materials and Manufacturing Processes, 3, 91-105, (1988) 67 A Matthews, “Industrial processes and applications of physical vapour deposition” Proc of the 1st International Conference on Surface Modification Technologies, Pheonix, Arizona, Jan 1988 The Metallurgical Society/AIME, Warrandale, USA AMPUBS/5 68 S J Bull, D S Rickerby, A Matthews, A Leyland, A R Pace and J Valli, “The use of scratch adhesion testing for the determination of interfacial adhesion: the importance of frictional drag” Proc of the International Conference on Metallurgical Coatings, ICMC 88, San Diego, USA, April 1988 Surf Coat Technol, 36, 503, (1988) 69 K S Fancey and A Matthews, “Coating thickness and composition uniformity in plasma assisted PVD” Proceeding of the Plasma Surface Engineering Conference PSE 88, Garmisch Partenkirchen, W Germany, September 1988 Deutsche Gesellschaft fur Metallkunde e.V Oberursel, FRG 70 A Leyland, K S Fancey, T Bell, S C Kwon, M J Park and A Matthews, “Plasma nitriding: processes and mechanisms” Proc of the Plasma Surface Engineering Conference, PSE 88, Garmisch Partenkirchen, W Germany, September 1988 Deutsche Gesellschaft fur Metallkunde e.V Oberursel, FRG 71 A S James and A Matthews, “Improvement of zirconia thermal barrier coatings by use of plasma assisted physical vapour deposition” Proc of the Plasma Surface Engineering Conference, PSE 88, Garmisch Partenkirchen, W Germany, September 1988 ibid 72 A Matthews, “Methods for assessing coating adhesion” Proceeding of the Surfaces, Materiaux, Technologie Conference, Lyon, October 1988 Le Vide, les Couches Minces, No Special, Octobre 1988, SFV, Paris 73 D Tither, A Matthews, A G Fitzgerald, R E Storey, A E Henderson, P A Moire, T J Dynes, D I Bower, E L V Lewis, G Doughty and W Foster, “The characterisation of carbon films containing boron and nitrogen” Carbon, 27, 4, 655, (1989) 74 A Matthews, “Diamond and carbon-based coatings” Proc of the 1989 European Tribology Conference, EUROTRIB 89, Helsinki, Finland, June 1989 International Tribology Council, London 75 D S Rickerby and A Matthews, “Ceramic coatings by physical vapour deposition” Reviews on Powder Metallurgy and Physical Ceramics, 4, 3-4, 155, (1991) 76 K S Fancey and A Matthews, “Metal clusters in ion plating” Applied Physics Letters, 55, 834, (1989) 77 D Tither, A Matthews, P John and J Wilson, “A perspective on Japanese patents on hard carbon/diamond films and related subjects from 1967-1987” Surf Coat Technol, 38, 251, (1989) 78 A Matthews, “The role of computer systems in coating selection” Proc Seminar on Choosing the Right Engineering Surface, London, June 1989 The Welding Institute, Abingdon 79 A Matthews, “Advances in surface processing technology” Keynote Chapter in “Advances in Surface Engineering - Processes, Fundamentals and Applications in Corrosion and Wear” Edited by K N Strafford, P K Datta and J S Gray, Ellis Horwood, 1989 AMPUBS/6 80 A Matthews, “Surface engineering in cutting technology” Proc of the Institute of Metals Autumn Meeting "A Cutting Edge for the 1990's", Sheffield, 1989 Institute of Metals, London 81 A Matthews and W D Sproul, “Hard coatings by PVD techniques” Proc of the AVS Short Course, Boston, 24 October 1989 American Vacuum Society, New York 82 H Ronkainen, S Varjus, K Holmberg, K S Fancey, A R Pace, A Matthews, B Matthes and E Broszeit, “Coating evaluation methods: a round robin study” Proc of the 16 th Leeds-Lyon Tribology Symposium, Lyon, France, September 1989 Elsevier Sequoia 83 A S James and A Matthews, “Thermal stability of PYSZ thermal barrier coatings deposited by RF PAPVD” Presented at the International Conference on Metallurgical Coatings, ICMC 89, San Diego, USA, April 1989 Surf Coat Technol, 41, 305, (1990) 84 A Leyland, K S Fancey, A S James and A Matthews, “Enhanced plasma nitriding at low pressures: a comparison between DC and RF techniques” Presented at the International Conference on Metallurgical Coatings, ICMC 89, San Diego, USA, April 1989 Surf Coat Technol, 41, 295, (1990) 85 K S Fancey and A Matthews, “Process Effects in Ion Plating” Proc 11 th International Vacuum Congress, Cologne, 1989 Published in Vacuum TAIP, 41, 7-9, 2196, (1990) 86 D Tither, A Dehbi, P Holiday, A Matthews, A G Fitzgerald, A E Henderson, B E Storey, T J Dines, P John and J I B Wilson, “The characterisation of ultra-hard carbon films produced from pre-processed carbon powder in a hybrid physical vapour deposition system” Carbon, 28, 5, 641, (1990) 87 K S Fancey and A Matthews, “An Investigation into the Variation of Bombardment Intensity from Ion Plating Discharges by Sputter Weight Loss Experiments” Proc International Conference on Metallurgical Coatings, ICMC90, San Diego, USA, 1990 Thin Solid Films, 193/194, 171, (1990) 88 H Ronkainen, K Holmberg, K S Fancey, A Matthews, B Matthew and E Broszeit, “Comparative Tribological and Adhesion Studies of some Titanium-Based Ceramic Coatings” Proc International Conference on Metallurgical Coatings ICMC90, San Diego, USA, 1990 Surf Coat Technol, 43/44, 888, (1990) 89 A S James and A Matthews, “Developments in RF Plasma Assisted PVD of PYSZ Thermal Barrier Coatings” Proc International Conference on Metallurgical Coatings ICMC90, San Diego, USA, 1990 Surf Coat Technol, 43/44 436, (1990) 90 M J Park, A Leyland and A Matthews, “Corrosion Performance of Layered PVD Coatings” Proc International Conference on Metallurgical Coatings ICMC90, San Diego, USA, 1990 Surf Coat Technol, 43/44, 481, (1990) 91 A Dehbi-Alaoui, A S James and A Matthews “A Comparison of the Properties of Hard Carbon Films Produced by Direct Gas Deposition and by Plasma Assisted Evaporation” Proc International Conference on Metallurgical Coatings ICMC 90, San Diego, USA, 1990 Surf Coat Technol, 43/44, 88, (1990) AMPUBS/7 92 P A Robinson and A Matthews, “Characteristics of a Dual Purpose Cathodic Arc/Magnetron Sputtering System” Proc International Conference on Metallurgical Coatings ICMC90, San Diego, USA, 1990 Surf Coat Technol, 43/44, 288, (1990) 93 A Dehbi-Alaoui, A Matthews and J Franks, “The Optical and Mechanical Properties of Carbon Films Grown Using a Fast Atom Beam Source” Proc Diamond Films 90, Crans Montana, Switzerland, 1990 Surf Coat Technol, 47, 722, (1991) 94 A Dehbi-Alaoui, P Holiday and A Matthews, “Optical Properties of Carbon Films Deposited using a Hybrid Physical Vapour Deposition Technique” ibid p327 95 P Holiday, A Dehbi-Alaoui and A Matthews, “Physical Properties of Carbon Films Produced Using a Hybrid Physical Vapour Deposition Technique” ibid p315 96 K S Fancey, P A Robinson, A Leyland, A S James and A Matthews, “A Coating Thickness Uniformity Model for PVD Systems - Further Validity Tests” Proc nd International Conference on Plasma Surface Engineering, PSE '90, Garmisch Partenkirchen, Germany, 1990 Materials Science and Engineering, A140, 576-582, (1991) 97 A S James, K S Fancey and A Matthews, “An Investigation into the Effects of Plasma Bombardment Anistropy in Low Frequency RF Glow Discharges” ibid 517-522 98 H Ronkainen, I Nieminen, K Holmberg, A Leyland, K S Fancey, A Matthews, B Matthes and E Broszeit, “Evaluation of some New Titanium Based Ceramic Coatings in Tribological Model Wear and Metal Cutting Tests” ibid 602-608 99 H Ronkainen, A Leyland and A Matthews, “A Comparative Study of the Corrosion Performance of TiN and Ti(B,N) Coatings Produced by Plasma-Assisted EBPVD” ibid 722726 100 A Matthews, K G Swift and P A Robinson, “Expert Systems in Surface Engineering”, Proc Surface Engineering and Heat Treatment Conference, London, 1990 The Institute of Metals, London 101 K S Fancey and A Matthews, “Evaporative Ion Plating: Process Mechanisms and Optimisation” IEEE Transactions on Plasma Science Vol 18, No 6, 869, (1990) 102 A Matthews, “New Research Centre in Surface Engineering at Hull University”, Editorial: Surface Engineering, 6, 73, (1990) 103 A Matthews, K S Fancey, A S James and A Leyland, “Developments in Plasma Assisted Physical Vapour Deposition” Proc Surface Engineering Practice and Prospects, Adelaide, Australia, 1991 Surface Engineering: Processes and Applications, K N Strafford, R St C Smart, I Sare, C Subramanian (Eds), Technomic Publishing Co Lancaster, Pennsylvania, 1995 104 H Ronkainen, I Nieminen, K Holmberg, A Leyland, A Matthews, B Matthes and E Broszeit, “Evaluation of Some Titanium-based Ceramic Coatings on High Speed Steel Cutting Tools” Proc of the International Conference on Metallurgical Coatings and Thin Films, ICMCTF '91, San Diego, USA, April 1991 Surf Coat Technol, 49, 468, (1992) AMPUBS/8 105 B Matthes, E Broszeit, J Aromaa, H Ronkainen, S-P Hannula, A Leyland and A Matthews, “Corrosion Performance of Some Titanium-Based Coatings” ibid, 49, 489, (1992) 106 P Holiday, A Dehbi-Alaoui and A Matthews, “A Comparison of Techniques for Producing Diamond-like Carbon Coatings” Proc of the st ASM Heat Treatment and Surface Engineering Conference, Amsterdam, 22-24 May 1991, ASM International (Europe), Brussels Materials Science Forum, Vols: 102-104, 643-654, (1991) 107 A Leyland, P R Stevenson and A Matthews, “Tribological Performance of Plasma Treated and Coated Surfaces” Proc of the 1st ASM Heat Treatment and Surface Engineering Conference, Amsterdam, 22-24 May 1991, ASM International (Europe), Brussels Materials Science Forum, Vols: 102-104, 615-622, (1991) 108 A S James and A Matthews, “Deposition of Stabilised Zirconia onto Metallic Substrates Using A DC Thermionic Triode Ion Plating Technique” Proc of the st ASM Heat Treatment and Surface Engineering Conference, Amsterdam, 22-24 May 1991, ASM International (Europe), Brussels Materials Science Forum, Vols: 102-104, 633-642, (1991) 109 P Robinson and A Matthews, “Further Developments of the Multi-Mode Ionised Vapour Source System” Proc of the st ASM Heat Treatment and Surface Engineering Conference, Amsterdam, 22-24 May 1991, ASM International (Europe), Brussels, Materials Science Forum, Vols: 102-104, 581-590, (1991) 110 A Matthews, A Leyland, H Ronkainen, I Nieminen, K Holmberg, B Matthes and E Broszeit, “Standardisation of Test Procedures in Surface Engineering” Proc Eurotech Direct '91, Birmingham, 2-4 July 1991, IMechE, London 111 A Matthews, “The Key to Success for Surface Engineering” Metals and Materials, March 1991, 150 112 H L Du, J S Gray, P K Datta, B Lewis and A Matthews, “Oxidation Behaviour of Certain CoBased Alloys Containing Refractory Metals” Proc Irish Materials Forum Conference IMF7, Limerick, Ireland, September 1991 113 J S Gray, H L Du, P K Datta, A Matthews and B Lewis, “High Temperature Degradation of NbN and ZrN Coated Nimonic and Inconel Superalloys in an Atmosphere of Low Oxygen and High Sulphur Potentials” Proc of Surf-Tec 91, 7-11 October, 1991 Paris, IITT International, Gournay sur Marce, 1991 114 J S Gray, H L Du, P K Datta, A Matthews and B Lewis, “High Temperature Degradation Studies for Diffusion Barrier Coatings for use in Ti-Based Metal Matrix composites” ibid 115 T J Dines, D Tither, A Dehbi-Alaoui and A Matthews, “Raman Spectra of Hard Carbon Fims and Hard Carbon Films Containing Secondary Elements” Carbon, 29, 2, 225, (1991) 116 A Leyland, K S Fancey and A Matthews, “Plasma Nitriding in a Low Pressure Triode Discharge to Provide Improvements in Adhesion and Load Support for Wear Resistant Coatings” Surface Engineering, 7, 207, (1991) 117 K S Fancey and A Matthews, “Determination of Electron Temperature in Ion Plating Discharges by Optical Emission Spectroscopy” Vacuum, 42, 1013, (1991) AMPUBS/9 118 K S Fancey, M Williams, A Leyland and A Matthews, “The Influence of Process System Characteristics on the Uniformity of Ion Plated Titanium Nitride Coatings” Vacuum, 42, 235-240 (1992) 119 H Ronkainen, I Nieminen, K Holmberg, A Leyland, A Matthews, B Matthes and E Broszeit, “Development and Evaluation of New Titanium-Based Ceramic Coatings for Use in Manufacturing Industry” Proc of MatTech 91, The nd European East-West Symposium on Materials and Processes, 26-30 May, Espoo, Finland, 1991, IMST, Finland, 1991 120 J Smith, P Holiday, A Dehbi-Alaoui and A Matthews, “Characterisation of Diamond-Like Carbon Films by Fine Scale Indentation and Topography Measurements” Proc of the nd European Conference on Diamond, Diamond-like and Related Coatings, Nice, France, 2-6 September 1991 Diamond and Related Materials, 1, 355, (1992) 121 A Dehbi-Alaoui and A Matthews, “Process Parameters and Directional Effects on the Optical Properties of Carbon Films Grown by Plasma Assisted PVD” Diamond and Related Materials, 1, 355, 445, (1992) 122 A Matthews, A Leyland, K S Fancey, A S James, P A Robinson P Holiday, A Dehbi-Alaoui and P R Stevenson, “Developments in Plasma Assisted PVD Processing” Proc of rd International Conference on Advances in Coatings and Surface Engineering for Corrosion and Wear, 11-15 May 1992, Newcastle-upon-Tyne Published in Surface Engineering, Vol III: Process Technology and Surface Analysis, P K Datta and J S Gray (Eds), Royal Society of Chemistry, Cambridge, 99-110, (1993) 123 S J Bull and A Matthews, “Diamond for Wear and Corrosion Applications” Proc of the European Diamond Technology for the 90's Workshop, Brussels, December 1991 Published in Diamond and Related Materials, 1, 1049-1064, (1992) 124 P Stevenson, A Leyland, M Parkin and A Matthews, “The Effects of process parameters on plasma carbon diffusion of stainless steel at low pressures” Proc of the International Conference on Metallurgical Coatings and Thin Films, San Diego, USA, April 1992 Surf Coat Technol 63, 135-143, (1994) 124 C V Cooper, P Holiday and A Matthews, “The effect of TiN interlayers on the indentation behaviour of diamond-like -carbon films” Surf Coat Technol, 63, 129-134, (1994) 126 S Bennett, A Matthews, A J Perry, J Valli, S J Bull and W D Sproul, “Multipass scratch testing at sub critical loads” Paper presented at ICMCTF '92 Tribologia, 13, 16-28, (1994) 127 A Dehbi-Alaoui, B Ollivier and A Matthews, “Evaluation of diamond-like carbon films on PET” Proc of the 11th International Conference on Vacuum Metallurgy, Antibes-Juan Les Pins, May 1992, Societe Francaise du Vide, Paris, 221-226, (1992) 128 Y Bounouh, M L Theye, A Dehbi-Alaoui, A Matthews, J Cernogora, J L Fave, C Colliex, A Gheorghia and C Senesmaud, “Influence of pi-bonded clusters on the electronic properties of diamond-like carbon films” Proc of the rd European Conference on Diamond, Diamondlike and Related Coatings, Heidelberg, Germany, September 1992 Diamond and Related Materials, 2, 259-265, (1993) AMPUBS/10 Polymer Substrates” Polymer Surface Modifications: Relevance to Adhesion (Ed: K L Mittal), Vol 2, 551-573, VSP, Utrecht, 2000 251 X Nie, A Leyland and A Matthews, “Low Temperature Deposition of Cr(N)/TiO Coatings Using a Duplex Process of Unbalanced Magnetron Sputtering and Micro-Arc Oxidation” Proc 27th International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2000, San Diego, USA, April, 2000 Surf Coat Technol, 133-134, 331-337, (2000) 251 J L He, K C Chen, C C Chen, A Leyland and A Matthews, “Cyclic Oxidation Resistance of Ni-Al Alloy Coatings Deposited on Steel by a Cathodic Arc Plasma Process” Surf Coat Technol, 135, 158-165, (2001) 252 A Matthews and A Leyland, "Entwicklungen bei PVD-Verschleischutzschichten" HärtereiTechnische Mitteilungen, 56, 5-13, (2001) 253 A Matthews, R Jones and S J Dowey, "Modelling the Deformation Behaviour of Multilayer Coatings" Tribology Letters, August 2001 254 X Nie, A Leyland, C Tsotsos, A D Wilson and A Matthews, “Characteristics of a Plasma Electrolytic Treatment for Stainless Steels” Proc 27 th International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2000, San Diego, USA, April, 2000 Surf Coat Technol, 139, 135-142, (2001) 255 C Liu, A Leyland, Q Bi and A Matthews, “Corrosion Resistance of Multi-Layered PAPVD TiN and CrN Coatings” Surf Coat Technol, 141, 164-175, (2001) 256 A L Yerokhin, A Leyland, A D Wilson, X Nie, C Tsotsos and A Matthews, “Duplex Surface Treatments Combining Plasma Electrolytic Nitrocarburising Plasma-Immersion Ion-Assisted Deposition” Surf Coat Technol, 142/144, 1123-1130, (2001) 258 A Matthews and A Leyland, “Developments in PVD tribological coatings” Heat Treatment of Metals, 28/3, 63, (2001) 259 A Matthews and A Leyland, “Developments in vapour deposited ceramic coatings for tribological applications” Proc EuroCeramics VII Brugge, Belgium, September 2001 Key Eng Mater, 206-213, 459, (2002) ISSN 1013-9826 260 X Nie, E I Meletis, J C Jiang, A Leyland, A L Yerokhin and A Matthews, “Abrasive wear/corrosion properties and TEM analysis of Al 2O3 coatings fabricated using plasma electrolysis” Surf Coat Technol, 149, 245, (2002) 261 M A Baker, S Klose, C Rebholz, A Leyland and A Matthews, “Evaluating the microstructure and performance of nanocomposite PVD TiAlBN coatings” Surf Coat Technol, 151-152, 338, (2002) 262 J L He, C H Yu, A Leyland, A D Wilson and A Matthews, “A comparative study of the cyclic thermal oxidation of PVD nickel aluminide coatings” Surf Coat Technol, 155, 67, (2002) 263 A D Wilson, A Davison, J C A Batista, A Leyland, A Matthews and K S Fancey, “Ion plating discharges: evidence of cluster formation during metal evaporation” Thin Solid Films, 414, 7, (2002) AMPUBS/21 264 C Liu, Q Bi, H Ziegele, A Leyland and A Matthews, “Structure and corrosion properties of PVD Cr-N coatings” J Vac Sci Technol, A20/3, 772, (2002) 265 A D Wilson, A Davison, A Leyland, A Matthews and K S Fancey, “Evidence of ionized metal clusters in ion plating discharges” Appl Phys Lett, 81/8, 1405, (2002) 266 A L Yerokhin, A Leyland and A Matthews, “Kinetic aspects of aluminium titanate layer formation on titanium alloys by plasma electrolytic oxidation” Appl Surf Sci, 200/1-4, 172, (2002) 267 M A Baker, C Rebholz, A Leyland and A Matthews, “Electron spectroscopic studies of nanocomposite PVD TiAlBN coatings” Vacuum, 67/3-4, 471, (2002) 268 J C A Batista, M C Joseph, C Godoy and A Matthews, “Micro-abrasion wear testing of PVD TiN coatings on untreated and plasma nitrided AISI H13 steel” Wear, 249, 971-979, (2002) 269 C Tsotsos, A L Yerokhin, A D Wilson, A Leyland and A Matthews, “Tribological evaluation of AISI 304 stainless steel duplex treated by plasma electrolytic nitrocarburising and diamond-like carbon coating” Wear, 253, 986, (2002) 270 A Davison, J C A Batista, A D Wilson, A Leyland, A Matthews and K S Fancey, “Diagnostic studies of discharges used for plasma assisted physical vapour deposition” Surface Engineering, 18/5, 385p, (2002) 271 K Holmberg, H Ronkainen and A Matthews, “Tribology of thin surface coatings” Proc rd International Conference on Surface Engineering, Chengdu, China, October, 2002, pub Southwest Jiaotong University Press, 17-23, (2002) 272 J C A Batista, C Godoy and A Matthews, “Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti,Al)N, TiN and Cr-N coatings” Tribol Intl, 35, 363, (2002) 273 J C A Batista, C Godoy, V T L Buono and A Matthews, “Characterisation of duplex and nonduplex (Ti,Al)N and Cr-N PVD coatings” Mater Sci Eng, A336, 39, (2002) 274 A.Matthews, A.Leyland and A.Wilson, “Plasma immersion ion implantation as a technique in duplex and hybrid processing” Vacuum, 68/1, 57, (2003) 275 M A Baker, P J Kench, M C Joseph, C Tsotsos, A Leyland and A Matthews, “The nanostructure and mechanical properties of PVD CrCu(N) coatings” Surf Coat Technol, 162, 222, (2003) 276 C Liu, Q Bi, A Leyland and A Matthews, “An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5N NaCl aqueous solution: Part I Establishment of equivalent circuits for EIS data modelling” Corr Sci, 45/6, 1243, (2003) 277 C Liu, Q Bi, A Leyland and A Matthews, “An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5N NaCl aqueous solution: Part II EIS interpretation of corrosion behaviour" Corr Sci, 45/6, 1257, (2003) AMPUBS/22 278 J C A Batista, C Godoy and A Matthews, “Impact testing of duplex and non-duplex (Ti,Al)N and Cr-N PVD coatings” Surf Coat Technol, 163-164, 353, (2003) 279 C Liu, Q Bi and A Matthews, “Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti-6Al-4V artificial hip joints” Surf Coat Technol, 163-164, 597, (2003) 280 J C A Batista, C Godoy, A Matthews and A Leyland, “Process developments towards producing well adherent duplex PAPVD coatings” Surface Engineering, 19/1, 37, (2003) 281 A L Yerokhin, A Leyland and A Matthews, “Discharge characterisation in plasma electrolytic oxidation of aluminium” J Phys D: Appl Phys, 36 (2003) 2010 282 A Matthews, “Plasma-based physical vapor deposition surface engineering processes” J Vac Sci Technol A, 21/5, S224-S231, (2003) (Special Supplemental Issue) 283 A Leyland and A Matthews, “Design criteria for wear-resistant nanostructured and glassymetal coatings” Surf Coat Technol, 177-178, 317, (2004) 284 A L Yerokhin, L O Snizhko, N L Gurevina, A Leyland, A Pilkington and A Matthews, “Spatial characteristics of discharge phenomena in plasma electrolytic oxidation of aluminium alloy” Surf Coat Technol, 177-178, 779, (2004) 285 L O Snizhko, A L Yerokhin, A Pilkington, N L Gurevina, D O Misnyankin, A Leyland and A Matthews, “Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions” Electrochimica Acta, 49, 2085, (2004) 286 A L Yerokhin, A Shatrov, V Samsonov, P Shashkov, A Leyland and A Matthews, “Fatigue properties of Keronite® coatings on a magnesium alloy” Surf Coat Technol, 182, 78, (2004) 287 L V Whittaker and A Matthews, “Comparison of a simulated “in-service” rig test with a standardised laboratory abrasion test” Surf Coat Technol, 177, 603-610, (2004) 288 M M Lima, C Godoy, P J Modenesi, J C Avekllar-Batista, A Davison and A Matthews, “Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings” Surf Coat Technol, 177, 489-496, (2004) 289 M C Joseph, C Tsotsos, M A Baker, P J Kench, C Rebholz A Matthews and A Leyland, “Characterisation and tribological evaluation of nitrogen-doped molybdenum-copper PVD metallic nanocomposite films” Surf Coat Technol, 90, 345, (2005) 290 M A Baker, P J Kench, C Tsotsos, P N Gibson, A Leyland and A Matthews, “Investigation of the nanostructure and wear properties of physical vapour deposited CrCu(N) nanocomposite coatings” J Vac Sci Technol A, 23/3, 423-433, (2005) 291 L O Snizhko, A L Yerokhin, N L Gurevina, D O Misnyankin, A Pilkington, A Leyland and A Matthews, “A model for galvanostatic anodising of aluminium in alkaline solutions” Electrochimica Acta, 50/27, 5458, (2005) AMPUBS/23 292 C Tsotsos, M A Baker, P J Kench, A Leyland and A Matthews, “Mechanical, tribological and structural properties of CrTiCu(B,N) PVD glassy-metal coatings” Proc PSE2004 Surf Coat Technol, 200/14-15, 4601, (2005) 293 M Monclus, M A Baker, C Tsotsos, A Leyland and A Matthews, “Investigation of the nanostructure and post-coat thermal treatment of wear resistant PVD CrTiCu(B,N) coatings” Proc PSE2004 Surf Coat Technol, 200/1-4, 310, (2005) 294 D V Shtansky, A N Sheveiko, M I Petrzhik, F V Kiryukhantsev-Korneev, E A Levashov, A Leyland, A L Yerokhin and A Matthews, “Hard tribological Ti-B-N, Ti-Cr-B-N, Ti-Si-B-N and Ti-Al-Si-B-N coatings” Surf Coat Technol, 200/1-4, 208, (2005) 295 M Audronis, P J Kelly, R D Arnell, A Leyland and A Matthews “Deposition of multicomponent chromium boride based coatings by pulsed magnetron sputtering of powder targets” ICMCTF (April 2005) Surf Coat Technol, 200/5-6, 1616, (2005) 296 A L Yerokhin, A Shatrov, V Samsonov, P Shashkov, A Pilkington, A Leyland and A Matthews, “Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process” Surf Coat Technol, 19/2-3, 150-157, (2005) 297 M Audronis, P J Kelly, R D Arnell, A Leyland and A Matthews, “The structure and properties of chromium diboride coatings deposited by pulsed magnetron sputtering of powder targets” Surf Coat Technol, 200/5-6, 1366, (2005) 298 J T Chang, C H Yeh, J L He, K C Chen, A Matthews and A Leyland, “Deposition of yttriastabilized zirconia films using arc ion plating” Surf Coat Technol, 200/5-6, 1401, (2005) 299 R H U Khan, A L Yerokhin, T Pilkington, A Leyland and A Matthews, “Residual stresses in plasma electrolytic oxidation coatings during on Al alloy produced by pulsed unipolar current” Surf Coat Technol, 200/5-6, 1580, (2005) 300 M Audronis, P J Kelly, R D Arnell, A Leyland and A Matthews, “Deposition of multicomponent chromium boride based coatings by pulsed magnetron sputtering of powder targets” Surf Coat Technol, 200/5-6, 1616, (2005) 301 A Matthews and A Leyland, “The future of plasma-based surface engineering techniques in tribology” Proc World Tribology Congress III : Vol 2, 297, (2005) pub ASME Intl; Three Park Avenue, NY 10016-5990, USA ISBN 0791842029 302 J C Avelar-Batista, E Spain, J Housden, A Matthews and G G Fuentes, “Plasma nitriding of Ti6Al4V alloy andd AISI M2 steel substrates using DC glow discharges under a triode configuration” Surf Coat Technol, 200, 1954-1961, (2005) 303 J Sun, T Stirner, W E Hagston, A Leyland and A Matthews, “A simple transferable interatomic potential model for binary oxides applied to bulk α–Al 2O3 and the (0001) α– Al2O3 surface” J Crystal Growth, 290, 235, (2006) 304 C Tsotsos, M A Baker, P J Kench, A Leyland and A Matthews, “Mechanical, tribological and structural properties of CrTiCu(B,N) PVD glassy-metal coatings” Surf Coat Technol, 200/14-15, 4601, (2006) AMPUBS/24 305 M Audronis, P J Kelly, R D Arnell, A Leyland and A Matthews, “A TEM study of the structure of magnetron sputtered chromium diboride coatings” J Phys: Conf Series, 26, 355, (2006) 306 M A Monclus, M A Baker, C Rebholz, V Stolojan, P N Gibson, A Leyland and A Matthews, “Nanostructural studies of PVD TiAlB coatings” Surf Interface Anal, 38/4, 731, (2006) 307 C G Rebholz, A Leyland, A Matthews C Charitidis, S Logothetidis and D Schneider, “Correlation of elastic modulus, hardness and density for sputtered TiAlB thin films” Thin Solid Films, 514/1-2, 81, (2006) 308 D T Asquith, A L Yerokhin, J R Yates and A Matthews, “Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy” Thin Solid Films, 515, 1187-1191, (2006) 309 F Casadei, R Pileggi, R Valle and A Matthews, “Studies on a reactive plasma sprayed/arc deposited duplex coating for titanium alloys” Surf Coat Technol, 201, 1200-1206, (2006) 310 K J Huang, J T Chang, A Davison, K C Chen, J L He, C K Lin, A Matthews and A Leyland, “Thermal cyclic performance of NiAl/alumina-stabilized zirconia thermal barrier coatings deposited using a hybrid arc and magnetron sputtering system” Surf Coat Technol, 201/7, 3901-3905, (2006) 311 M Audronis, P J Kelly, A Leyland and A Matthews, “Microstructure of pulsed- and continuous-direct current magnetron sputtered Cr-B coatings” Thin Solid Films, 515/4, 1511-1516, (2006) 312 M Audronis, A Leyland, P J Kelly and A Matthews, “The Effect of Pulsed Magnetron Sputtering on the Structure and Mechanical Properties of CrB Coatings” Surf Coat Technol, 201, 3970-3976, (2006), 313 J Z Sun, T Stirner and A Matthews, “Calculation of native defect energies in alpha-Al 2O3 and alpha-Cr2O3 using a modified Matsui potential” Surf Coat Technol, 201/7, 4201-4204, (2006) 314 J Z Sun, T Stirner and A Matthews, “Structure and surface energy of low-index surfaces of stoichiometric alpha-Al2O3 and alpha-Cr2O3” Surf Coat Technol, 201/7, 4205-4208, (2006) 315 J T Chang, A Davison, J L He and A Matthews, “Deposition of Ni-Al-Y alloy films using a hybrid arc ion plating and magnetron sputtering system” Surf Coat Technol, 21, 5877-5883, (2006) 316 C Rebholz, M Monclus, M A Baker, P H Mayrhofer, P N Gibson, A Leyland and A Matthews, “Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation” Surf Coat Technol, 201/13, 6078-6083, (2007) 317 M Audronis, P J Kelly, A Leyland and A Matthews, “A new approach to the deposition of elemental boron and boron-based coatings by pulsed magnetron sputtering of loosely-packed boron powder targets” Plasma Process Polym, 4, S160-S165, (2007) AMPUBS/25