Tài liệu Using Device Manager in Windows 2000 Server docx

1 - 2 IT Essentials II v2.0 - Lab 7.1.7 Copyright  2002, Cisco Systems, Inc. Lab 7.1.7: Using Device Manager in Windows 2000 Server Estimated Time: 20 minutes Objective Upon completion of this lab, the student will be able to navigate the Device Manager, locate hardware, and manually reinstall a device. Equipment • Windows 2000 Professional or Windows 2000 Server installed and configured. Scenario Windows 2000 Server, has just been installed on a PC. While testing devices, it is determined that the CD-ROM is not working properly. The problem can be resolved by uninstalling and reinstalling the CD-ROM device. Procedures First, navigate through the device manager. Then reinstall the CD-ROM driver. Step 1 Right-click on My Computer and select Properties. List the different tabs available in the System Properties window. __________________________________________________________________ __________________________________________________________________ Step 2 Click on the Hardware tab. Now click on Device Manager. Use the space below to record what comes up on the screen. __________________________________________________________________ __________________________________________________________________ Step 3 Double-click on Keyboards. The keyboard is displayed. Double-click on the keyboard. What is the “Device Status”? __________________________________________________________________ __________________________________________________________________ Step 4 Click on the Resources tab. List the IRQ that the keyboard is using. 2 - 2 IT Essentials II v2.0 - Lab 7.1.7 Copyright  2002, Cisco Systems, Inc. Step 5 Locate the CD-ROM device. Double click the CD-ROM tab. The CD-ROM installed on the system is displayed. Double-click the system CD-ROM. What tabs are listed? What do the tabs contain? __________________________________________________________________ __________________________________________________________________ Step 6 Click on the Drivers tab. Click the Uninstall button. Click OK. The computer is uninstalling the CD-ROM. When it is finished, look at the CD-ROM device. Is the CD- ROM device there? Why or why not? __________________________________________________________________ __________________________________________________________________ Step 7 Reinstall the CD-ROM driver. Click the Action button in the Device Manager. Click Scan for Hardware Changes. What happened? __________________________________________________________________ __________________________________________________________________ Is the CD-ROM drive in the Device Manager? __________________________________________________________________ Reflection How can using the Device Manager be beneficial to an administrator who is troubleshooting the devices connected to the server? __________________________________________________________________ __________________________________________________________________ . navigate the Device Manager, locate hardware, and manually reinstall a device. Equipment • Windows 2000 Professional or Windows 2000 Server installed and. 7.1.7 Copyright  2002, Cisco Systems, Inc. Lab 7.1.7: Using Device Manager in Windows 2000 Server Estimated Time: 20 minutes Objective Upon completion