170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Cisco Systems, Inc. Corporate Headquarters Tel: 800 553-NETS (6387) 408 526-4000 Fax: 408 526-4100 WAN CiscoView for the MGX 8220 Release 2.0 January 2000 Customer Order Number: DOC-40328= Text Part Number: 78-6543-02 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Access Registrar, AccessPath, Any to Any, AtmDirector, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo, Cisco Certified Internetwork Expert logo, CiscoLink, the Cisco Management Connection logo, the Cisco NetWorks logo, the Cisco Powered Network logo, Cisco Systems Capital, the Cisco Systems Capital logo, Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, the Cisco Technologies logo, ConnectWay, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, Internet Quotient, IP/VC, Kernel Proxy, MGX, MultiPath Data, MultiPath Voice, Natural Network Viewer, NetSonar, Network Registrar, the Networkers logo, Packet, PIX, Point and Click Internetworking, Policy Builder, Precept, ScriptShare, Secure Script, ServiceWay, Shop with Me, SlideCast, SMARTnet, The Cell, TrafficDirector, TransPath, ViewRunner, Virtual Loop Carrier System, Virtual Service Node, Virtual Voice Line, VisionWay, VlanDirector, Voice LAN, Wavelength Router, Wavelength Router Protocol, WaRP, WebViewer, Workgroup Director, and Workgroup Stack are trademarks; Changing the Way We Work, Live, Play, and Learn, Empowering the Internet Generation, The Internet Economy, and The New Internet Economy are service marks; and ASIST, BPX, Catalyst, Cisco, Cisco IOS, the Cisco IOS logo, Cisco Systems, the Cisco Systems logo, the Cisco Systems Cisco Press logo, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastLink, FastPAD, FastSwitch, GeoTel, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA, NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any of its resellers. (9911R) WAN CiscoView for the MGX 8220 Copyright © 2000, Cisco Systems, Inc. All rights reserved. CONTENTS iii WAN CiscoView for the MGX 8220 Release 2.0, January 200 Document Objectives xxi Audience xx Document Organization xxii Document Conventions xx Related Documentation xxiii CHAPTER 1 Product Overvie 1-1 General Description 1-1 Starting CiscoView and Displaying a Dev i c 1-1 Understanding the Displa 1-2 Printing a Displa 1-3 Changing CiscoView Operating Characteristi c 1-3 Organizing Management Informat i o 1-4 Categorizing Informati o 1-5 Displaying Configuration Informati o 1-5 Displaying Performance Informati o 1-5 Selecting a Car 1-5 Selecting a Line or P o r 1-5 Using Online He l 1-6 Jumps and pop- u p 1-6 Help Window Menu and Button Ba r 1-6 OverView and See Also Link 1-7 Exit Help 1-7 CHAPTER 2 Displaying and Configuring Node 2-1 Selecting a Devic 2-1 Node Dialo 2-1 Redundancy Info Dialo 2-3 LAN Interface Info Dialog 2-6 Serial Interface Info Dialog 2-8 Clock Source Info 2-10 Front Card Info 2-11 Contents iv WAN CiscoView for the MGX 822 Release 2.0, January 2000 CHAPTER 3 Configuring ASC Card 3-1 Selecting the Card and Displaying Card Paramet e r 3-1 ASC Card Configuration Dial o 3-1 ASC Features 3-3 Disk Diagnostic 3-3 CHAPTER 4 Configuring 4-Port Cards 4-1 Selecting the Card and Displaying Card Paramet e r 4-1 Card Configuration Dialo 4-1 Service Module Featur e 4-3 ATM Port RealTime Counters 4-3 Lines 4-5 Ports 4-8 Card/Ports (FR) Dialog 4-8 Card/Ports (ATM) Dilao 4-11 Channel 4-13 Card/Channels (Circuit Emulation) Dialog 4-14 Card/Channels (FR) Dialog 4-16 Card/Channels (ATM) Dialo 4-18 CHAPTER 5 Configuring CESM Cards 5-1 Selecting the Card and Displaying Card Paramet e r 5-1 CESM Card Configurati o 5-1 CESM Service Module Feature 5-3 Lines 5-4 Ports 5-6 Channel 5-9 CHAPTER 6 Configuring FRSM 2CT3 Cards 6-1 Displaying Card Paramete r 6-1 FRSM-2CT3 Card Configuration Dia l o 6-1 Service Module Featur e 6-3 FR Port Realtime Counters 6-4 LCN Partition Ty p 6-7 Ports 6-8 Channel 6-10 Contents v WAN CiscoView for the MGX 8220 Release 2.0, January 200 Card/Channels (FR 6-10 Card/Channels State Info (FR 6-15 Lines Configuration 6-16 Physical Line Config(dsx3) 6-17 dsx3 Physical Line Alarm Configurat i o 6-19 dsx3 Counte r 6-20 dsx3 Counters (1 o f 2 6-21 dsx3Counters (2 of 2 6-22 Channelized Line Configuration (ds x 1 6-24 Channelized Line Alarm Configuration (dsx1 6-25 Channelized Line RealTime Counters (dsx 1 6-29 Logical Port 6-30 Logical Port Config (FR Port s 6-31 FR Port RTCs 6-34 FR Port RTCs (CLLM 6-37 FR Port Resource Partiti o 6-38 Logical Ports (Service Queue 6-39 CHAPTER 7 Configuring FRSM-2T3/E3 Cards 7-1 Displaying Card Paramete r 7-1 FRSM-2T3/E3 Card Configuration Di a l o 7-1 FRSM-2T3/E3 Service Module Feature 7-3 FR Port Realtime Counters 7-4 LCN Partition Ty p 7-7 Ports 7-8 Channel 7-10 Card/Channels (FR 7-10 Card/Channels State Info (FR 7-15 Lines Configuration 7-16 dsx3 Lines Configuratio 7-16 Physical Line Configuration (dsx3 7-17 dsx3 Physical Line Alarm Configurat i o 7-19 dsx3 Counte r 7-21 Configuring Logical Ports 7-24 FRSM Logical Ports Configuratio 7-25 FR Port RTCs 7-28 Contents vi WAN CiscoView for the MGX 822 Release 2.0, January 2000 FR Port RTCs (CLLM 7-31 FR Port Resource Partiti o 7-32 Logical Ports (Service Queue 7-33 CHAPTER 8 Configuring FRSM 8-Port Cards 8-1 Selecting the Card and Displaying Card Paramet e r 8-1 FRSM 8-Port Card Configuration Dialo 8-1 FRSM Service Module Feature 8-3 FR Port RealTime Counter 8-4 Lines 8-6 Ports 8-9 Channel 8-12 CHAPTER 9 Configuring FRSM-HS1 Cards 9-1 Selecting the Card and Displaying Card Paramet e r 9-1 FRSM-HS1 Port Card Configuration Dialo 9-1 FRSM-HS1 Service Module Feature 9-3 FR Port RealTime Counter 9-3 Ports 9-6 Channel 9-7 CHAPTER 10 Configuring FRSM HS1/B Cards 10-1 Displaying Card Paramete r 10- FRSM HS1/B Ca r 10- Service Module Featur e 10-4 FR Port Realtime Counters 10-4 LCN Partition Ty p 10- Card/Ports (X.21/V.3 5 10- Channel 10-9 Lines Configuration 10-13 Physical Line Config (X.21/V.3 5 10-1 Physical Line Alarm Config (X.21/V.35) 10-1 Logical Port 10-1 Logical Port Config (X.21/V.35 Ports 10-1 FR Port RTCs 10-2 FR Port RTCs (CLLM 10-2 Contents vii WAN CiscoView for the MGX 8220 Release 2.0, January 200 FR Port Resource Partition Conf i 10-2 CHAPTER 11 Configuring FRSM-HS2 Cards 11-1 Selecting the Card and Displaying Card Paramet e r 11-1 FRSM-HS2 Card Configuration Dial o 11-1 FRSM-HS2 Service Module Feature 11- FR Port RealTime Counter 11-4 Lines 11-6 Ports 11-8 CHAPTER 12 Configuring IMATM Cards 12-1 Selecting the Card and Displaying Card Paramet e r 12-1 IMATM Card Configuration Dialo 12-1 IMATM Service Module Features 12- IMATM Clock Configuration 12- IMATM Port Configuration 12-5 CHAPTER 13 Configuring AUSM Cards 13-1 Selecting the Card and Displaying Card Paramet e r 13-1 AUSM Card Configuration Dialo 13- AUSM Service Module Featu r e 13-3 ATM Port RealTime Counters Configuration 13-4 Lines 13-6 Configuring dsx1 Line 13- Configuring dsx3 Line 13- Ports 13-1 Card/Ports (ATM) 13-1 Card/Ports (Forum Compliant IMA Groups) 13-1 Channel 13-1 CHAPTER 14 Configuring BNM-T3/E3 Cards 14-1 Selecting the Card and Displaying Card Paramet e r 14-1 BNM-T3/E3 Card Configuration Dia l o 14-2 Lines 14-3 Contents viii WAN CiscoView for the MGX 822 Release 2.0, January 2000 CHAPTER 15 Configuring BNM-155 Cards 15-1 Selecting the Card and Displaying Card Paramet e r 15-1 BNM-155 Card Configuration Dia l o 15-1 Lines 15-3 CHAPTER 16 Configuring SRM 3T3 Cards 16- Selecting the Card and Displaying Card Paramet e r 16-1 SRM 3T3 Card Configuration Dialog 16-1 Lines 16-3 CHAPTER 17 Displaying and Configuring Li n e 17-1 Selecting a Lin 17-1 Configuring DSX1 Line 17-1 Physical Line Configuration (DSX1 17-2 DSX1 Physical Line Alarm Configuratio 17-4 DSX1 Line RealTime Counters 17- DSX1 PLCP Configuration 17-6 DSX3 Lines Configuratio 17-6 Physical Line Configuration (dsx3) 17- DSX3 Physical Line Alarm Configuratio 17-8 DSX3 Counters 17-1 DSX3 PLCP Alarm Configuration 17-12 Channelized Line Configurati o 17-1 Channelized Line Configuration (DSX1 17-1 Channelized Line Configuration (DSX3 17-1 X21 Lines Configuration Dial o g 17-16 X21 Line Config 17-17 X21 Physical Line Alarm Configurati o 17-1 Sonet Lines Configura t i o 17-1 Physical Line Config (Sonet) 17-1 Physical Line Alarm Config (Sonet 17-2 Sonet Counters 17-21 ATM Line 17-2 SRM Line Configuratio 17-2 SRM Counters 17-2 SRM Line Distribution (SRM 3T3) 17-2 Contents ix WAN CiscoView for the MGX 8220 Release 2.0, January 200 Logical Port 17-2 CESM Ports Configuration 17-2 Logical Port Config (CESM 17-2 FRSM Ports Configurati o 17-2 FRSM Logical Ports Configuratio 17-25 FR Port RTCs 17-2 FR Port RTCs (CLLM 17-2 X21 Frame Ports Configuratio 17-2 CHAPTER 18 Monitoring Li n e 18-1 Selecting a Lin 18-1 Monitoring DSX1 Counte r 18-1 Monitoring DSX3 Counte r 18-3 Monitoring DSX3 PLCP Count e r 18-6 Monitoring Logical Port 18- FR Port Monitor (RCV) Counter 18- FR Port Monitor (XMT) Counte r 18-8 FR Port Monitor (ILMI/CLLM) Count e r 18- ATM-ILMI Port RealTime Counters 18-1 ATM RealTime Counters 18-10 Channel Monitorin 18-1 FRSM Channel Counters (R C V 18-1 FRSM Channel Counters (X M T 18-1 Channel SAR Counte r 18-14 CESM Channel Counte r 18-1 Monitoring ILMI 18-1 Monitoring IMA Group Count e r 18-1 Monitoring BNM Counter 18-17 Monitoring SRM Counter 18-17 Contents x WAN CiscoView for the MGX 822 Release 2.0, January 2000 [...]... the connector, then select Configure>Line • Select the connector, right-click to display the Line pop-up menu, then select Configure • Select the connector, then click the Configure button on the toolbar To display the configuration parameters for a particular line/port, select the name of the category from the Category pull-down menu at the top of the dialog WAN CiscoView for the MGX 8220 Release 2.0,... 18-17 18-1 18-17 WAN CiscoView for the MGX 8220 Release 2.0, January 200 xix Tables WAN CiscoView for the MGX 822 xx Release 2.0, January 2000 Preface This section discusses the objectives, audience, organization, and conventions of the WAN CiscoVie for the MGX 8220 User Guide Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product The Documentation... configuration information in the Configuration windows The information is displayed as a list of fields for a single port, or as a table that includes fields for multiple ports Displaying Performance Informatio CiscoView displays performance information using the Monitor menu in the main window to display performance information To view performance information, select Monitor from a component pop-up menu Performance... CiscoView Open Device Window WAN CiscoView for the MGX 8220 Release 2.0, January 200 1-1 Chapter 1 Product Overview Understanding the Display Step 2 In the Host Name section, type the IP address or name of the host and the read community name of the device It you are going to perform configuration tasks on the device, you must also provide the write community name of the device Step 3 Press Enter The. .. display the configuration parameters for a particular card, select the name of the category from the Category pull-down menu at the top of the dialog Selecting a Line or Port There are five ways to select the line or port to display the appropriate line configuration dialog: • Double-click the connector on the rear view of the card • Double-click the Port LED on the front view of the card • Select the. .. instructions for using WAN CiscoView for the MGX 8220 WAN CiscoView is a GUI-based device management software application that allows you to: • display a graphical representation of the network device • display configuration and performance information • perform minor configuration tasks • perform minor troubleshooting tasks Audience This publication is intended for anyone who operates or manages aWAN and... Configuring Lines,” provides instructions for displaying and configuring line information on the WAN CiscoView interface Chapter 18, “Monitoring Lines,” provides instructions for monitoring line information on the WAN CiscoView interface WAN CiscoView for the MGX 822 xxii Release 2.0, January 2000 Preface Document Conventions Document Conventions Command descriptions use these conventions: • Commands and keywords... See Also links in the help window topics You can select the Overview link to obtain background information for the procedure described in the current help window Select the See Also link to display a list of related topics and go directly to those topics from the current help window Exit Help Select File>Exit on the menu bar in the Help window to exit Help WAN CiscoView for the MGX 8220 Release 2.0,... Select the gray area surrounding the slots, right-click to display the Device pop-up menu, then select Configure • Select the gray area surrounding the slots, then click the Configure button on the toolbar To display the configuration parameters for a particular device category, select the name of the category from the Category pop-up menu at the top of the dialog The categories of device configuration... windows Performance information is displayed in CiscoView Monitor windows, which are sometimes referred to as dashboards 2 Configuration and performance information is displayed for devices, cards, and ports WAN CiscoView for the MGX 822 1-4 Release 2.0, January 2000 Chapter 1 Product Overview Selecting a Card Categorizing Information CiscoView displays different categories of information for each device, . resellers. (9911R) WAN CiscoView for the MGX 8220 Copyright © 2000, Cisco Systems, Inc. All rights reserved. CONTENTS iii WAN CiscoView for the MGX 8220 Release. Contents x WAN CiscoView for the MGX 822 Release 2.0, January 2000 FIGURES xi WAN CiscoView for the MGX 8220 Release 2.0, January 200 Figure 1-1 CiscoView Main