... Injection + Cooling
+ Ejection + Mold open
1281han03.pmd 28.11.2005, 11:0767
49
3 Cost Factors Affecting
Productivity
A mold’s productivity is ultimately measured by how many good parts it can
produce ... this
machine.
Figure 3.1 Total equipment productivity
(TEP)
Figure 3.2 Plan of molding plant in
Example A
1281han03.pmd 28.11.2005, 11:0749
68
3 Cost Factors Affecting Pro...
... 11:07105
106
3 Cost Factors Affecting Productivity
Table 3.5 Unit Costs of Product with 8 s Cycle
Estimated total production # of
cavities
Cost
per unit
10,000 100,000 1,000,000 10,000,000
1 Mold cost ... Required
1281han03.pmd 28.11.2005, 11:07107
108
3 Cost Factors Affecting Productivity
To arrive at the actual cost of the product, we add the mold cost/ unit and
m...
... machine
is not the limiting factor when trying
to improve a mold’s productivity
1281han03.pmd 28.11.2005, 11:0775
76
3 Cost Factors Affecting Productivity
With the redesigned product, we now require
35 ... system (below)
3.7 Forecasting the Cycle Time
1281han03.pmd 28.11.2005, 11:0781
82
3 Cost Factors Affecting Productivity
For this discussion, we will ignore the fact that...
... vật liệu bằng gạch, đá, bê tông hoặc bê
tông cốt thép
Dùng móng trụ có thể giảm sức lao động, bớt việc đào đất và tiết kiệm vật liệu so
với dùng móng băng. Hình dáng thì tuỳ theo vật liệu ... dân dụng tường chiếm vào khoảng 40-65% trọng lượng vật liệu
toàn nhà, giá thành chiếm khoảng 20-40% giá thành của nhà. Do đó việc chọn vật liệu
làm tường cần hợp lý, phương pháp cấu tạo đú...
... attest to the accuracy of this information. Use of a term in this book should
not be regarded as affecting the validity of any trademark or service mark.
Feedback Information
At Cisco Press,
... XQuery [15] are moving in this direction. Query processing involves devel-
oping a cost model. Are there special cost models for Internet database man-
agement? With respect to browsing operations, ... associated metadata – responds to
requests for utilisation of the resource with details of any costs, restrictions and
relevant capabilities. Assuming the deal with the end-user is accepted...