... that shares the same pinout, such as the PIC18F452. Therefore,experimenters may expand on the application using the higher performance of the PIC18 family of parts withoutchanging the hardware.With ... ‘00’, then the minuteswill be set to ‘00’ automatically.7. If the time is correct, select Y (the default) using the up/down buttons and press enter. The userwill be prompted to program the ‘off’ ... twice:Lastly, wait for three cycles (six zero-crossings) beforesending the next block:There are exceptions to this format. For example, the bright and dim codes do not require the 3-cycle waitbetween...