Tài liệu Configuring ISDN BRI (U-Interface) docx
Tài liệu Configuring ISDN BRI (U-Interface) docx
... Verifying the ISDN BRI switch type
a. Not all ISDN switch types are the same worldwide and the first step is to configure the following:
• The ISDN TE1 device
• The router
• What ISDN switch ... reset the ISDN BRI interface issue the command clear interface bri 0. This
will cause all ISDN parameters to be renegotiated. Issue the clear command on the router and
then che...
Tài liệu Configuring Distance Vector Protocols docx
... Subconfiguration mode command.
This command was discussed in Chapter 5.
Configuring IP IGRP
Setting up IGRP is almost as simple as configuring RIP:
Router(config)# router igrp
autonomous_system_#
Router(config-router)# ... the
debug ip rip
command for RIP on a router.
EXERCISE 10-1
ON THE CD
Configuring RIP
These last few sections dealt with configuring RIP on a router. This exercise...
Tài liệu Configuring IPSec and Certification docx
... Guide
78-13943-01
Chapter 6 Configuring IPSec and Certification Authorities
Manual Configuration of SAs
Manually configuring SAs is very similar to the basic configuration described in Configuring IPSec.”
The ... name
6-12
Cisco PIX Firewall and VPN Configuration Guide
78-13943-01
Chapter 6 Configuring IPSec and Certification Authorities
Configuring IPSec
The following is sample outp...
Tài liệu Lab 4.2.1 Configuring ISDN BRI (U-Interface) ppt
... Cisco Systems, Inc.
Lab 4.2.1 Configuring ISDN BRI (U-Interface)
Objective
• Configure an ISDN router to make a successful connection to a local ISDN switch.
Background/Preparation ...
This lab assumes that a router with an ISDN BRI U interface is available. An Adtran Atlas550 ISDN
emulator is used to simulate the switch /ISDN cloud. If an ISDN router is no...
Tài liệu Configuring Component Properties docx
... feels, let's do a
quick test.
2. Choose Control > Test Movie.
< Day Day Up >
Configuring Component Properties
As you're well aware by now, most graphical elements used
Tài liệu Configuring Distribute Lists and Passive Interfaces docx
... - 7 Semester 5: Advanced Routing v2.0 - Lab 7.5.1 Copyright 2001, Cisco Systems, Inc.
7.5.1 Configuring Distribute Lists and Passive Interfaces
RIPv2
Full T1:
1.544 Mbps
19.2 Kbps
Singapore
AucklandSanJose3
Fa0/0
Tài liệu Configuring Legacy DDR docx
... Cisco Systems, Inc.
Lab 4.3.2 Configuring Legacy DDR
Objective
• Configure an ISDN router to make a Legacy dial-on-demand routing (DDR) call to another ISDN
capable router.
• When the ... configuration to specify that only
http traffic will bring up the link.
Background/Preparation
In this lab, 2 ISDN routers are required. If ISDN routers are not available, review the...
Tài liệu Configuring Cisco AVVID docx
... utilizing
your ISDN infrastructure.
www.syngress.com
Figure 1.3 Using Voice- and Video-Over IP
Data Infrastructure
(VOIP - Toll Bypass)
T1
T1
Data Network
Data Network
PSTN
PBX
Telephone
Network
PC
BRI
BRI
Video
Conferencing
Building ... Infrastructure
(VOIP - Toll Bypass)
T1
T1
PSTN
PBX
PBX
Telephone
Network
Telephone
Network
PC
PC
BRI
BRI
Video
Conferencing
Video
Conferencing
Buildin...
Tài liệu Configuring CITRIX METAFRAME for WINDOWS 2000 TERMINAL SERVICES docx
... Lance Tilford, Meaghan Cunningham, Kim Wylie, Harry
Kirchner, John Hays, Bill Richter, Kevin Votel, Brittin Clark, and Sarah
MacLachlan of Publishers Group West for sharing their incredible marketing
experience ... deal was struck. Microsoft’s desire was to
www.syngress.com
111_ctrx_01 11/10/00 2:53 PM Page 19
A Brief History of Citrix
More than five years ago, Citrix had a product on the mark...
Tài liệu Configuring VLSM and IP Unnumbered docx
... obviate the need to address these
links altogether. You further maximize ITA’s address use by configuring IP unnumbered
on every serial interface in the WAN. To configure IP unnumbered, use
Từ khóa: