... with Metals Handbook.
Klaus M. Zwilsky
President
ASM International
Edward L. Langer
Managing Director
ASM International
Preface
This is the second of two volumes in the ASM Handbook ... forwarded to ASM International.
Library of Congress Cataloging-in-Publication Data
ASM International
Metals handbook.
Vol. 2: Prepared under the direction of the ASM Internation...
... general description of phase-fraction charts.
13. 8 5ASM: Metals Handbook, 9th ed., Vol 9, Metallography and Microstructures, American Society for
Metals, 1985. A comprehensive reference covering ... structure shows coring: light areas are
nickel rich; dark areas are low in nickel. 20×. Source: 8 5ASM 13
Liquation. Because the lowest freezing material in a cored microstructure is segr...
... always been an
important part of ASM Handbooks. The previous ASM compilation of commercially important diagrams appeared in
Volume 8 of the 8th Edition of Metals Handbook.
Fig. 13 Use of Gibbs ... continued to hear from ASM members that a summary version consisting primarily of phase diagrams should be
published as an ASM Handbook for the practicing engineer. While such a...
... forwarded to ASM International.
Library of Congress Cataloging-in-Publication Data (for Print Volume)
ASM Handbook (Revised vol. 4) Metals Handbook. Title proper has changed with v.4: ASM Handbook/ Prepared ... Phase Diagrams, Vol 8, Metals Handbook, 8th ed., American Society for
Metals, 1973
2. Properties and Selection of Metals, Vol 1, Metals Handbook, 8th ed., America...
... FORWARDED TO
ASM INTERNATIONAL.
LIBRARY OF CONGRESS CATALOGING-IN-PUBLICATION DATA (FOR PRINT
VOLUME)
ASM HANDBOOK (REVISED VOL. 6) METALS HANDBOOK. VOLS. 1-2 HAVE TITLE:
METALS HANDBOOK. VOL. ... WELDING, BRAZING, AND SOLDERING. 1.
METALS- HANDBOOKS, MANUALS, ETC. 2. METAL-WORK-HANDBOOKS, MANUALS, ETC. I. ASM
INTERNATIONAL. HANDBOOK COMMITTEE. II. TITLE: METALS HANDBOO...
... shows a few common formulations for specific combinations of
metals and cleaning methods.
Table 1 Alkaline cleaning formulas for various metals
Formula, wt%, for cleaning:
Aluminum Steel Zinc ... solution 50-
78% HNO
3
34 ±
6
110 ±
10
Maximum allowable immersion
time, 20 min
Note: Heavy metals plus stripping chemicals require appropriate means of disposal to meet EPA regulati...
... purpose materials [etc.] v.5. Surface
engineering
1. Metals Handbooks, manuals, etc.
I. ASM International. Handbook Committee.
II Metals handbook.
TA459.M43 1990 620.1'6 90-115
ISBN 0-87170-377-7 ... are invited, and should be forwarded to ASM International.
Library of Congress Cataloging-in-Publication Data (for Print Volume)
ASM International
ASM handbook.
Inclu...
... increasing compressive stress
The essential absence of striations on fatigue fracture surfaces of metals tested in vacuum tends to support the assumption
that oxidation reduces slip reversal during